Industrial Engineering Commons^™

An Investigation On The Effectiveness Of A Problem Structuring Method In A Group Decision-Making Process, Ying Thaviphoke

Engineering Management & Systems Engineering Theses & Dissertations

There is no shortage of methods to address messy problems. A messy problem is a system of problems with multiple stakeholders who may hold different views of what is feasible or desirable. Decision-makers in a messy problem are prone to committing an error – especially the Type III error. One of the ways to mitigate the chance of committing the error in a messy problem is to reach a group consensus. Problem Structuring Methods (PSM) are the collections of participatory modeling methods that aim to tackle a messy problem. Despite the positive reports, literature indicates some challenges and criticisms of …

A Quest To Identify The Emerging Leadership Skills In Vuca World And Investigation Of Their Applications In Various Organizational Levels And Security Environments, Ali Can Kucukozyigit

Engineering Management & Systems Engineering Theses & Dissertations

The theoretical framework of this research is based on “skills approach” that emphasizes the leader’s capabilities (skills, knowledge, and capabilities) that can be learned, taught, and fostered. VUCA (Volatile, Uncertain, Complex and Ambiguous) environment is chosen as the focal point of this research as the leadership skills are extracted from studies referring to such environment. Although the acronym is dominantly used in management and business domains, the military also uses it to describe the complex operational environments like in Iraq and Afghanistan. The identification of individual leadership skills and delivering the right skill, at the right time, to the right …

Application Of Theory Of Constraints (Toc) In Managing Project Information Constraints, Ferdinand Z. Prantl

EMSE Doctoral Projects

The scope of this doctoral project is the non-traditional application of Drum-Buffer-Rope (DBR) from the area of Theory of Constraints (ToC) in mitigating disruption in distribution facilities during phased upgrades caused by information constraint. The relevance of this project is that industrial equipment upgrades pose a significant risk of disrupting the operation of automated distribution facilities. It is partly due to a very high expected availability rate, as well as tight coupling with other upstream and downstream elements of the larger supply chain network. As a consequence of disruption in this scenario, losses incurred not only within the facility being …

Effects Of Transparency And Haze On Trust And Performance During A Full Motion Video Analysis Task, Sarah C. Leibner

Psychology Theses & Dissertations

Automation is pervasive across all task domains, but its adoption poses unique challenges within the intelligence, surveillance, and reconnaissance (ISR) domain. When users are unable to establish optimal levels of trust in the automation, task accuracy, speed, and automation usage suffer (Chung & Wark, 2016). Degraded visual environments (DVEs) are a particular problem in ISR; however, their specific effects on trust and task performance are still open to investigation (Narayanaswami, Gandhe, & Mehra, 2010). Research suggests that transparency of automation is necessary for users to accurately calibrate trust levels (Lyons et al., 2017). Chen et al. (2014) proposed three levels …

Optimization Of Automated Guided Vehicles (Agv) Fleet Size With Incorporation Of Battery Management, Ahmed Hamdy

Engineering Management & Systems Engineering Theses & Dissertations

An important aspect in manufacturing automation is material handling. To facilitate material handling, automated transport systems are implemented and employed. The AGV (automated guided vehicle) has become widely used for internal and external transport of materials. A critical aspect in the use of AGVs is determining the number of vehicles required for the system to meet the material handling requirements.

Several models and simulations have been applied to determine the fleet size. Most of these models and simulations do not incorporate the battery usage of the vehicles and the effect it can have on the throughput and the number of …

Development And Initial Evaluation Of A Reinforced Cue Detection Model To Assess Situation Awareness In Commercial Aircraft Cockpits, Aysen K. Taylor

Engineering Management & Systems Engineering Theses & Dissertations

Commercial transport aircraft of today vary greatly from early aircraft with regards to how the aircraft are controlled and the feedback provided from the machine to the human operator. Over time, as avionics systems became more automated, pilots had less direct control over their aircraft. Much research exists in the literature about automation issues, and several major accidents over the last twenty years spurred interest about how to maintain the benefits of automation while improving the overall human-machine interaction as the pilot is considered the last line of defense.

An important reason for maintaining or even improving overall pilot situation …

Quantifying Impact Of Cyber Actions On Missions Or Business Processes: A Multilayer Propagative Approach, Unal Tatar

Engineering Management & Systems Engineering Theses & Dissertations

Ensuring the security of cyberspace is one of the most significant challenges of the modern world because of its complexity. As the cyber environment is getting more integrated with the real world, the direct impact of cybersecurity problems on actual business frequently occur. Therefore, operational and strategic decision makers in particular need to understand the cyber environment and its potential impact on business. Cyber risk has become a top agenda item for businesses all over the world and is listed as one of the most serious global risks with significant financial implications for businesses.

Risk analysis is one of the …

Reliability Estimation Of Reciprocating Seals Based On Multivariate Dependence Analysis And It's Experimental Validation, Chao Zhang, Rentong Chen, Shaoping Wang, Yujie Qian, Mileta M. Tomovic

Engineering Technology Faculty Publications

Accurate reliability estimation for reciprocating seals is of great significance due to their wide use in numerous engineering applications. This work proposes a reliability estimation method for reciprocating seals based on multivariate dependence analysis of different performance indicators. Degradation behavior corresponding to each performance indicator is first described by the Wiener process. Dependence among different performance indicators is then captured using D-vine copula, and a weight-based copula selection method is utilized to determine the optimal bivariate copula for each dependence relationship. A two-stage Bayesian method is used to estimate the parameters in the proposed model. Finally, a reciprocating seal degradation …

Natural Resources Governance Employing Blockchain-Based Decision-Making, Farinaz Sabz Ali Pour, Adrian Gheorghe

Engineering Management & Systems Engineering Faculty Publications

Natural resources are essential structures of socio-economic systems which shape the well-being of humanity, environment, and the economy. Human actions have become the critical responsibility for environmental changes and pressuring many planetary boundaries. Having a systematic approach can provide a governance platform including the inherent characteristics of the resource, the historically established form of use, and transaction costs. A natural resource governance framework is developed by applying Blockchain technology as the primary goal of this study to regulate and manage the extraction and trades. Blockchain technology provides a distributed concurrency monitoring system for sustainable resource management. Persistent and pervasive cooperation …

Sems Says...: We Welcome Your Feedback, Brian K. Smith, Chinweike Eseonu, Sreekanth Ramakrishnan, Pilar Pazos-Lago

Engineering Management & Systems Engineering Faculty Publications

The article offers information on the IISE Annual Conference Expo 2019 to be held on May 18-21, 2018 in Orlando, Florida, for industrial and systems engineers.

Training The Active Duty Naval Workforce Using The Digital Thread To Design/Redesign Basic Models With Validation Through The Additive Manufacturing, Vukica M. Jovanovic, Anthony W. Dean, Karina Arcaute, Michel Audette, Dipankar Ghosh

Engineering Technology Faculty Publications

This digest will showcase one approach to teaching engineering graphics and design for the active duty naval workforce. Sailors are exposed to solid modeling fundamentals during the two-day long workshop. Solid modeling is taught in connection to concepts of digital thread and design for additive manufacturing. Engineering graphics fundamentals are introduced with the emphasis on a deeper understanding of machinist approach, often used for an easier understanding of Boolean algebra, which is embedded within the Computer Aided Design tools and discusses how the design for additive manufacturing would differ from that approach. Moreover, special attention is given to understanding the …

A Framework For Executable Systems Modeling, Matthew Amissah

Engineering Management & Systems Engineering Theses & Dissertations

Systems Modeling Language (SysML), like its parent language, the Unified Modeling Language (UML), consists of a number of independently derived model languages (i.e. state charts, activity models etc.) which have been co-opted into a single modeling framework. This, together with the lack of an overarching meta-model that supports uniform semantics across the various diagram types, has resulted in a large unwieldy and informal language schema. Additionally, SysML does not offer a built in framework for managing time and the scheduling of time based events in a simulation.

In response to these challenges, a number of auxiliary standards have been offered …

A Representation Of Tactical And Strategic Precursors Of Supply Network Resilience Using Simulation Based Experiments, Yaneth C. Correa-Martinez

Engineering Management & Systems Engineering Theses & Dissertations

Modern supply chains are becoming increasingly complex and are exposed to higher levels of risk. Globalization, market uncertainty, mass customization, technological and innovation forces, among other factors, make supply networks more susceptible to disruptions (both those that are man-made and/or ones associated with natural events) that leave suppliers unavailable, shut-down facilities and entail lost capacity.

Whereas several models for disruption management exist, there is a need for operational representations of concepts such as resilience that expand the practitioners’ understanding of the behavior of their supply chains. These representations must include not only specific characteristics of the firm’s supply network but …

Transforming Yekaterinburg Into A Safe, Resilient-Smart And Sustainable City, S. A. Timashev, V. N. Alekhin, L. V. Poluyan, I. Fontanals, A. Gheorghe

Engineering Management & Systems Engineering Faculty Publications

The initiative (since 2014) project described in this paper is a product of a joint innovative research and implementation effort of the Civil Engineering and Architecture Institute, Ural Federal University, the Science and Engineering Centre "Reliability and Safety of Large Systems and Machines", Ural Branch Russian Academy of Sciences (both Yekaterinburg), Start-up OptiCits, Barcelona, Spain and the Old Dominion University, Norfolk, VA, USA. The project is based on using the MAICS convergent technology [1] to create a versatile multi-purpose tool for optimizing the science and art of risk based governance of resilience-smart and sustainable city infrastructure and communities operating in …

Implementation Of A Multi-Criteria Decision Analysis (Mcda) Toolkit To Aid In Ranking Naval Mission Vessel Combinations With Uncertainty, Andrew R. Miller

Engineering Management & Systems Engineering Theses & Dissertations

United States (U.S.) military bases have largely been constructed outside of the contiguous United States (OCONUS) due to the need of close support logistics for conflicts and wars. In contrast, military bases within the contiguous United States (CONUS) have been constructed mostly due to economic and other related monetary factors. In addition to monetary concerns for the placement of military bases (specifically naval bases), there exists tactical, environmental, cultural, climate, logistical, and geographical issues that need to be fully considered before deciding on a naval installation location and the vessels to be stationed there. I will present a new toolkit …

Impact Of A Localized Lean Six Sigma Implementation On Overall Patient Safety And Process Efficiency, Luvianca G. Gil-Moreno

Engineering Management & Systems Engineering Theses & Dissertations

Continuous quality improvement tools have been widely used in the Healthcare Industry to increase efficiency and patient safety as well as to reduce cost. This research explores the impact of a Lean Six Sigma (LSS) process improvement initiative on the overall process efficiency and patient safety in the Labor and Delivery (L+D) units of a large hospital provider. This study focuses on the application of a modeling and simulation methodology to investigate the influence of a localized process improvement intervention on the overall L+D unit output by considering patient flow, system capacity, and unit performance. The simulation models capacity profiles …

Simulation And Optimization Of Ant Colony Optimization Algorithm For The Stochiastic Uncapacitated Location-Allocation Problem, Jean-Paul Arnaout, Georges Arnaout, John El Khoury

Engineering Management & Systems Engineering Faculty Publications

This study proposes a novel methodology towards using ant colony optimization (ACO) with stochastic demand. In particular, an optimizationsimulation-optimization approach is used to solve the Stochastic uncapacitated location-allocation problem with an unknown number of facilities, and an objective of minimizing the fixed and transportation costs. ACO is modeled using discrete event simulation to capture the randomness of customers’ demand, and its objective is to optimize the costs. On the other hand, the simulated ACO’s parameters are also optimized to guarantee superior solutions. This approach’s performance is evaluated by comparing its solutions to the ones obtained using deterministic data. The results …

Improvement Of Work Process Performance With Task Assignments And Mental Workload Balancing, Cansu Kandemir

Engineering Management & Systems Engineering Theses & Dissertations

The outcome of a work process depends heavily on which tasks assigned to which employees. However, sometimes-optimized assignments based on employees’ qualifications may result in an uneven and ineffective workload distribution among them. Likewise, an even workload distribution without considering the employee's qualifications may cause unproductive employee-task matching that results in low performance of employees. This trade-off is even more noticeable for work processes during critical time junctions, such as in military command centers and emergency rooms that require being fast and effective without making errors.

This study proposes that optimizing task-employee assignments according to their capabilities while also keeping …

Development Of A Dsm-Based Model For Managing The Design Of Complex Systems Considering The Impact Of Technological Obsolescence, Gershom Kwaku Obeng

Mechanical & Aerospace Engineering Theses & Dissertations

Obsolescence has been a constant issue for process planners and designers and if not properly accounted for, obsolescence can become an expensive issue. As systems become more complex, interconnected, and nonhomogeneous, separate studies of single groups of equipment are no longer sufficient in modeling the obsolescence of the systems that they make up. The purpose of this dissertation is to model the likelihood of a process's design becoming obsolescent given the obsolescent behavior of the equipment used to complete the process. The methodology discussed in this work is based on a combination of using a systems engineering tool called the …

Period Batch Control - A Production Planning System Applied To Virtual Manufacturing Cells, Z. Tesic, B. Stevanaov, V. Jovanovic, M. Tomic, C. Kafol

Engineering Technology Faculty Publications

Period Batch Control (PBC) system has been known for its implementation with the classical group technology (GT) cells, and it has been known for its simplicity. The main production planning decisions concern the choice of the period length and the stage number and contents. Also, in order to better integrate the production planning with the application of GT cells at the shop floor, the concept of virtual manufacturing cells has been applied. Since virtual cells configurations are changing periodically, a model for implementing the PBC system into virtual manufacturing cells environment is developed. The model enables alignment of the PBC …

Pilot Programs For Veterans Transition To Engineering Fields, Vukica M. Jovanovic, Anthony W. Dean, Carol L. Considine, Karina Arcaute, Petros Katsioloudis, Mileta Tomovic, Thomas B. Stout, Connor Schwalm, Jennifer G. Michaeli, Yuzhong Shen

Engineering Technology Faculty Publications

Veterans, through their active service, frequently receive training in highly skilled technical areas. However, they may lack a theoretical background in underlying engineering principles. They also need additional support with the transition from a highly structured military environment to an environment with more ambiguous time constraints and different sorts of responsibilities. Moreover they are facing challenges which are specific for their student population. Therefore, enabling multiple mechanisms which would support them and provide them necessary guidance are especially important at universities with large veteran populations such as at Old Dominion University in Norfolk, Virginia. Hence, there is a need for …

Applications Of Digital Manufacturing In Manufacturing Process Support, Vukica Jovanovic, Mihael Debevec, Niko Herakovic, Alok Verma, Mileta Tomovic

Engineering Technology Faculty Publications

In this study, the authors developed three new approaches and models for improvements related to manufacturing processes. The main focus was on planning in a digital environment before the actual manufacturing process is carried out. The first approach is digital manufacturing, which gives affords the opportunity for performing an entire manufacturing process in a virtual environment. In this way, engineers virtually define, plan, create, monitor, and control all production processes. The planning phase can be done simultaneously, while other manufacturing processes are already in place. In this way, processes can continue with no interruption. Various product lifecycle management tools have …

The Reconfigurable Machinery Efficient Workspace Analysis Based On The Twist Angles, Ana M. Djuric, Vukica Jovanovic, Mirjana Filipovic, Ljubinko Kevac

Engineering Technology Faculty Publications

A novel methodology for the calculation, visualisation and analysis of the Reconfigurable Machinery Efficient Workspace (RMEW), based on the twist angles, is presented in this paper. The machinery's kinematic parameters are used for calculating the workspace, while the efficient workspace is associated with the machinery's path and includes the end-effector position and orientation. To analyse and visualise many different machinery efficient workspaces at the same time, the calculation is based on the previously developed and validated complex reconfigurable machinery's kinematic structure named n-DOF Global Kinematic Model (n-GKM). An industrial robot is used as an example to demonstrate …

Systems Theory-Based Construct For Identifying Metasystem Pathologies For Complex System Governance, Polinpapilinho F. Katina

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop a systems theory-based construct for metasystem pathologies identification in support of the problem formulation phase of systems-based methodologies using an inductive research design. Problem formulation has been identified as one of the most critical stages in complex system development since it influences later stages in complex system understanding. In modern society where the operating landscape is characteristically ambiguous, mired by complexity, emergence. interdependence, and uncertainty, the concept of problem formulation is used to ensure right issues affecting complex systems surface and addressed to meet expected system performance and viability. In this research, …

Reducing Uncertainty In Technology Selection For Long Life Cycle Engineering Designs, Halil I. Ozdemir, C. Ariel Pinto, Resit Unal, Charles B. Keating, Colin Britcher, Sila Çetinkaya (Ed.), J. K. Ryan (Ed.)

Engineering Management & Systems Engineering Faculty Publications

The best capabilities are usually achieved by having the latest technologies in defense systems. However, including the new, usually immature, technologies in a system design does not always easily result in achieving the capabilities at the right level, at an affordable cost, and in a timely manner. Many programs have suffered from immature technologies as cost overruns, late or no deliveries, and poor performance levels. Another impact of technology selection appears as obsolescence after the deployment of systems, or even before the deployment of the system. As the technologies of a system become obsolete, the cost of maintaining the system …

Challenges For Developing Complex System Governance, Charles B. Keating, Polinpaplinho F. Katina, Joseph M. Bradley, Sila Çetinkaya (Ed.), J. K. Ryan (Ed.)

Engineering Management & Systems Engineering Faculty Publications

This paper examines the challenges and practice implications for Complex System Governance (CSG). CSG is presented as an emerging field focused on the design, execution, and evolution of the higher order (metasystem) functions necessary to provide control, communication, coordination, and integration of a complex system. This paper is focused on three primary objectives. First, we introduce the complex system problem domain that the CSG field is being designed to address. The pervasiveness of this problem domain is demonstrated by a short examination of the water utilities sector. Second, we expound the nature of CSG and an emerging reference model …

A Simulation-Based Approach To Risk Assessment And Mitigation In Supply Chain Networks, Mamadou Seck, Ghaith Rabadi, Christian Koestler

Engineering Management & Systems Engineering Faculty Publications

We present in this paper a simulation-based approach to evaluate the risk associated with supply chain disruptions caused by failures in some supply chains nodes and measure the impact of such disruptions on supply chain key performance measures (KPIs) of interest. The proposed framework enables analysts and managers to repeatedly assess the risk to their supply chains based on various simulated scenarios and identify the most critical nodes whose disruption will have the highest impact on the KPIs of interest. As a result, companies can focus on the most critical supply chain assets and develop targeted mitigation plans that minimize …

Emergency Diesel-Electric Generator Set Maintenance And Test Periodicity, Stephen John Fehr

Engineering Management & Systems Engineering Theses & Dissertations

Manufacturer and industry recommendations vary considerably for maintenance and tests of emergency diesel-electric generator sets supporting critical operations power systems facilities. There is little consistency among sets of similar technology, and manufacturers and their representatives often provide contradictory guidance. As a result, periodicity of emergency diesel-electric generator set maintenance and tests varies considerably in practice. This work proposes and tests a research and analysis framework to develop parametric regression survival models of modern diesel-electric generator sets in emergency standby duty as a function of maintenance periodicity, test periodicity, and other predictors. Within this framework, predictors are developed from common maintenance …

Time-Based Collision Risk Modeling For Air Traffic Management, Alan E. Bell

Engineering Management & Systems Engineering Theses & Dissertations

Since the emergence of commercial aviation in the early part of last century, economic forces have driven a steadily increasing demand for air transportation. Increasing density of aircraft operating in a finite volume of airspace is accompanied by a corresponding increase in the risk of collision, and in response to a growing number of incidents and accidents involving collisions between aircraft, governments worldwide have developed air traffic control systems and procedures to mitigate this risk. The objective of any collision risk management system is to project conflicts and provide operators with sufficient opportunity to recognize potential collisions and take necessary …

Graphical Display Of The Effect Of Three Cash Flow Elements For Sensitivity Analysis, Kawintorn Pothanun

Engineering Management & Systems Engineering Theses & Dissertations

Sensitivity analysis is one of the most important analysis techniques in a decision making process. The analytic intent behind sensitivity analysis is the variation of parameters in data models, and the examination of the effect of these variations on the outcome of the models. There are four primary benefits from conducting a sensitivity analysis: (a) sensitivity analysis facilitates the decision makers' development of recommendations, (b) sensitivity analysis serves as a tool for communication among stakeholders or decision makers in a project or an organization, (c) sensitivity analysis increases overall understanding of the decision models, and (d) sensitivity analysis serves as …