Simulating The Flow Of Students Through Cal Poly's Undergraduate Industrial Engineering Program For Policy Analysis, Alexander Clayton Weber

Industrial and Manufacturing Engineering

The purpose of this project is to analyze the flow of Industrial Engineering students at California Polytechnic University San Luis Obispo in order to measure various graduation metrics by use of a simulation. Currently, graduation rates are relatively low in comparison with the rest of the state of California and future growth and decreased budgets may threaten graduation rates for incoming students. This simulation will identify bottleneck classes [those that hold up students from graduating] and provide a basis for a sensitivity analysis in which different scenarios are constructed to determine their effects on graduation metrics. The simulation will offer …

Lunalight - Bringing Light To The Expanding World, Gabriela M. Igel, Daniel J. Patrick, Kimberley M. Smith

Materials Engineering

The LunaLight, a solar rechargeable light and cell phone charger, addresses the lack of access to electricity faced by 1.4 billion of the world’s population (International Finance Corporation). The LunaTech team has developed a product that is bright, simple, compact, versatile and competitive with existing products. Through a partnership with the non-profit organization One Million Lights, LunaTech has improved a previous team’s design to address user feedback, concerns of durability, and manufacturability.

The LunaLight design includes a 5 component plastic housing held together by 4 screws, a surface mounted PCB, a lithium-ion (Li-Ion) battery, one high-brightness LED, a solar panel, …

Application Of Systems Engineering And Project Management For Algae Photo Bioreactors, Andrew S. Balberchak

Industrial and Manufacturing Engineering

EXECUTIVE SUMMARY

Today there is much talk about different sources for biofuel to replace the decreasing supply of fossil fuels. Algae seem very promising with its abundance across the globe and relatively simple growing conditions. Lipids can be extracted from this organism which is then converted to biofuel. Although biofuel production from algae is not economically viable at this stage, researchers are suggesting using the by-products of algae for supplemental and healthcare use. If true, this could justify the economics of obtaining fuel from algae by creating more markets from various algae products.

Cal Poly State University’s Food Science and …

Convertible High Heel Design, Mathew Caspari, Tyler Shelton

Industrial and Manufacturing Engineering

Many women feel pain and discomfort when wearing high heels to certain events. This is a problem because it can lead to a variety of health issues. It would be beneficial and convenient if a woman could remove the heelpiece from her shoe while still wearing the same product. However, there is currently no popular high heels that can convert to a flat shoe on the market today. Our goal was to perform an in depth human factors analysis with regards to high heel use and formulate a solution to these problems. After reviewing literature, conducting a survey, and analyzing …

Thermal Characterization Of A System On Chip (Soc), James Gilstrap

Industrial and Manufacturing Engineering

Electronics are getting more and more advanced. Companies are designing their product to be more powerful, but at the same time they are designing them to be smaller and more user friendly. Heat becomes a major factor with the limited amount of surface area. The objective of this project is to measure the junction temperature of three system on chips (SoC) under various loading conditions and their time constant. The junction temperature was measured based on the diode’s I-V linear relationship. Both calibration and measurement of the junction temperature were conducted for three different SoC packages. The measurement results can …

Reason-To-Reuse: A Sustainable To-Go Food Storage Container System For Restaurants, Ryan Christopher Labuda

Industrial and Manufacturing Engineering

A food storage container (FSC), also known as a to-go box, is a very popular way for Americans to pick up food when in a rush and take it with them or store leftovers after dining. Some of the more popular materials that make up FSCs include Styrofoam, paper and plastic. These FSCs are meant for one time use and subsequently the majority end up as waste in their local regions. Reason-To-Reuse is a sustainable business that provides an alternative to the current model of disposable FSCs at restaurants by cutting down on waste. The objective of the Reason-To-Reuse project …

Design And Analysis Of A Materials Management System For Boeing Commercial Airplanes' (The Boeing Company) Metallic Raw Material Supply Chain With A Focus On Lead Time Manipulation And Corresponding Effects On Inventory And Cost, Henry Lu

Industrial and Manufacturing Engineering

The purpose of this project is to identify the costs associated with an aggregation strategy run by Boeing Commercial Airplanes. In order to identify these costs, a rudimentary replenishment system must be designed for the supply chain due to the fact that there is currently no such system in place. This replenishment system will be used to create a model (created in Excel) to calculate the total annual costs of the system. The model must allow changes to some of the important inputs such as mill performance measures and lead times and report the resulting changes in the total annual …

Companion Pass Program, Andrew Toney

Industrial and Manufacturing Engineering

At the end of each quarter the students of Cal Poly prepare to sign up for their classes for next quarter. This process is more difficult for seniors who must meet very specific requirements in order to graduate on time. Students can spend hours trying to find the “perfect schedule”, that one schedule that fits their personal schedule and their graduation requirements, while not over taxing themselves during that quarter by having too much class work. This Cal Poly explores the creation and implementation of an extra scheduling tool to address the weaknesses of the current scheduling system, PASS, and …

Bicycle Mounted Iphone 5 Case With Charging System, Patrick Goebel

Industrial and Manufacturing Engineering

This purpose of this project is to design and manufacture a bicycle handlebar mounted case that will house Apple’s iPhone 5 and a charging system that utilizes a charge from a generator hub in the front wheel of a bicycle. The charging system and software for this project will be developed by an Electrical Engineering Graduate student. The case and charging system must be a self-contained unit that is weather-proof and aesthetically pleasing. It must allow the user to use all of the features of the iPhone 5 under a wide range of speeds. It must be adjustable between portrait …

Analyzing The Costs Of Different Energy Storage Systems For California Polytechnic State University, Christian Royer

Industrial and Manufacturing Engineering

The goal of this project was to analyze the different ways to release energy from an energy storage device into the grid to save money. This project was worked in conjunction with a Master’s of Science student. An entire year of Cal Poly’s energy usage was examined and multiple trends were observed about when the maximum amount of energy was used. These trends looked at the time of day, the day of the week, and season to see what would be the best way to release energy into the grid to save money. There were two different batteries sizes examined …

The Decision Process Of Transitioning From A 3-Axis To A 4-Axis Or 5-Axis Mill Machine, Andrew Van Cleve, David Sherman

Industrial and Manufacturing Engineering

Companies are always looking for new ways to increase productivity and help the company save money. The way this is done is by researching new and more efficient ways to produce whatever it is the company is selling. Since there are always new technologies coming forward it can be difficult to distinguish which ones are viable and which ones are not. This paper looks at the decision of moving a company from a traditional 3-axis milling set-up to a 4-axis or 5-axis milling set-up. Through research and analysis this report will guide a company through the decision making process and …

Reducing Customer Wait Time And Improving Processes At Abc’S Atv Rentals, Thomas Allen Merrill Jr.

Industrial and Manufacturing Engineering

This project serves to explore the system bottlenecks of a small, family owned ATV rental company. The main objective is to reduce the average time a customer spends in the system, focusing on customer wait time as well as other areas that can be improved. This was done by collecting time studies and inputting the values into simulation software, which was run to represent the current system as well as various other possible scenarios encountered by rental companies. While creating the simulation, adaptive techniques were incorporated into the simulation. These techniques aim to increase the durability and reusability of the …

Evaluation And Redesign Of Potting Shed For The Non-Profit Organization, Growing Grounds Farms, Adya Sinha, Julianna Levy

Industrial and Manufacturing Engineering

Growing Grounds, a local nonprofit organization, operates as a fully functioning nursery in San Luis Obispo. Their planting facility is outdated and the process is inefficient. They have new funding available and need to determine if they should automate certain processes or improve existing methods. This report details the current process and presents two possible ergonomic solutions and the accompanying layouts and improvements. An analysis is conducted to determine which new layout is recommended for Growing Grounds based on their current production and revenue, and future recommendations are given.

A Stand-Alone Methodology For Data Exploration In Support Of Data Mining And Analytics, Michael Gage

Master's Theses

With the emergence of Big Data, data high in volume, variety, and velocity, new analysis techniques need to be developed to effectively use the data that is being collected. Knowledge discovery from databases is a larger methodology encompassing a process for gathering knowledge from that data. Analytics pair the knowledge with decision making to improve overall outcomes. Organizations have conclusive evidence that analytics provide competitive advantages and improve overall performance. This paper proposes a stand-alone methodology for data exploration. Data exploration is one part of the data mining process, used in knowledge discovery from databases and analytics. The goal of …

Human Powered Helicopter: Spars, Jason Addy, Sterling Fuentes, Graham Garvin, Kenneth Girardin, Lipski Timonthy, Daniel Logue

Industrial and Manufacturing Engineering

Abstract

Neal Saiki, a Cal Poly alumnus, donated a human powered helicopter to the Cal Poly Aircraft Design and Construction Club in Fall Quarter 2012. To achieve the requirements of the Igor Sikorsky Human Powered Helicopter Competition, this senior project was tasked with reducing the weight of the load-bearing spars without changing geometry.

The aluminum spars were replaced with carbon fiber. The spars were designed to maintain the bending and torsional stiffnesses. Twelve sections of carbon fiber tubes ranging from 8 to 12 ft in length and 2" to 3" in inner diameter were made using pre-preg carbon fiber wrapped …

S&G Metal Fab Battery Tray, Matthew Nartatez

Industrial and Manufacturing Engineering

This report was written for the design of a battery tray and manufacturing process for S&G Metal Fab. The manufacturing steps of how to process the sheet metal to create the product are defined and documented in this report. This project began with constraints given by S&G and were all accomplished using coursework knowledge obtained as a manufacturing engineer student at Cal Poly San Luis Obispo. This report mainly covers parameters regarding the cutting, bending and, deforming of sheet metal to acquire the desired shapes and sizes. It also analyzes the costs that are associated with these processes and material. …

Polyxpress Usability Testing, Chloe Erdie

Liberal Arts and Engineering Studies

This paper investigates different usability testing methods, and details a final usability testing procedure for the PolyXpress application. Usability testing varies greatly and depends on the size, scope, and budget of a project. Jakob Nielsen, a usability expert, says usability testing generally involves finding test users, asking the users to perform representative tasks with the design, and observing/documenting what happens. There are three main types of usability testing methods: traditional, discount, and going-out-of-business. The methods range in scale, complexity, and cost. This paper specifically details the unique combination of the three main methods that should be used as the usability …

Manufacturing Execution System (Mes) An Examination Of Implementation Strategy, Riley F. Elliott

Master's Theses

The priorities of executing the manufacturing orders generated by an MRP system are often in operational conflicts with the dynamics of the manufacturing floor. It is not uncommon for a given manufacturing order to reach the shop floor several weeks or longer after being "opened" by an MRP system where it may face a chaotic case of large queues, machine down-time, parts shortage, scrap problems and other resource management constraints. Many companies have resorted to the Manufacturing Execution System (MES) software solution to resolve these problems. This method first gained popularity in mid-90’s within the semiconductor industry. An MES approach …

Applying Sustainability From A Systems Perspective:, Timothy Brophy

Master's Theses

Becoming sustainable is no longer an option. Current industry methods will not be able to support the necessary changes our growing society demands. In order to keep up with ever increasing demands industry will be aimed toward making major system changes toward a fully sustainable model. As of right now only basic sustainability actions have been put in place. Industry needs to make a strategic change toward resilient systems with an end goal of evolving into fully biomimic systems. This thesis covers a brief history of production leading to the Industrial Revolution which created a need for increased sustainability efforts. …

Reliability Analysis Of Low-Silver Bga Spheres Comparing Failure Detection Criteria, Briana Fredericks

Industrial and Manufacturing Engineering

One of the challenges of solder joint reliability tests is estimating the time of failure of the solder joint. Failure criteria should be able to detect solder joint failure as early as possible, while minimizing the probability of false detection. The failure mechanism under study is cracks due to thermal fatigue. The most common method to estimate failure due to cracks is to monitor the resistance during testing, because solder imaging and cross-sectioning methods are destructive. Current industry failure criteria do not adequately demonstrate the relationship between the size of the crack and the resulting change in resistance. This project …

Application Of Assignment Problem Theory To Cal Poly's Week Of Welcome Program Presentation Schedule, Kevin T. Aban

Industrial and Manufacturing Engineering

The Week of Welcome (WOW) is a part of Cal Poly’s Orientation Programs. One of the main objectives of WOW is to provide content to new students on a variety of different topics in the form of Awareness Presentations. The problem being addressed in this paper is that of assigning the orientation groups of incoming students to these Awareness Presentations so that they have a schedule that meets all of the necessary criteria. The most important of those requirements is schedule balance and flexibility for future use. This scheduling problem is solved through the use of operations research and binary …

Gyroscope Assembly Process Improvement Analysis, Ian Douglass, Juan Ulises Saucedo

Industrial and Manufacturing Engineering

The gyro is a fundamental portion of many assemblies that Company S, a directional drilling company, manufactures. The gyro assembly is a highly sensitive and complex process, and it was paramount to establish efficiency and quality guidelines to base management decisions. The first guideline succeeded by increasing throughput by means of a simulation using ProModel. Next, non-value and value added activities were identified through a value stream map. Lastly, a database was developed in order to capture high integrity quality control data, or key performance indicators, such as, throughput, first-pass inspection yields at every test performed, and defects found. This …

Implementation Of A Sustainable Project Management Methodology For Cal Poly Sae Baja, Theo Graziadei

Industrial and Manufacturing Engineering

A lack of project organization manifested through unclear team goals, rush deliveries of materials, lost tools and materials, half days of effort due to improper planning, wasted design time, missed submission dates, lack of clear job positions at competition, and low competition scores. A process was created to properly manage the team and it was implemented through the use of various templates, examples, and calculation programs. Each deliverable received feedback from this project’s stakeholders and changes were reflected in the final process. The results were as follows:

Table 1: Summary of Results

Implement a sustainable project management methodology

Each step …

The Design, Testing, And Manufacturing Of A Pin Fin Extrusion Heat Sink, Arash Michael Mira

Industrial and Manufacturing Engineering

My senior project focuses on the design, testing, and manufacturing of pin fin extrusion heat sinks that are you used to cool simple electronic applications across a multitude of markets. Without the modern day heat sink, electronics that we have become familiar with throughout our everyday lives will cease to exist. I will design these heat sinks using Solid Works 3D CAD. I will then test the heat sinks using ICEPAK CFD software, where I will model the heat sink against a 5 watt application, inside of a cabinet that models the chassis of a computer. After receiving these results, …

Evaluation And Design Of Potting Production Process Improvements For The Non-Profit Organization, Growing Grounds Farm, Maiya Avalon Bourland, Precilla Tang

Industrial and Manufacturing Engineering

This report focuses on the potting production process for the non-profit organization (NPO) Growing Grounds Farm (GGF), and aims to promote a standardized workflow system to enhance the working experience for Transitions‐Mental Health Association employees and volunteers. This project takes careful consideration into the process improvements proposed so to support the double bottom line of economic and social objectives. To address the equally important objectives, the Human Centered Design toolkit created by IDEO, specifically for third sector organizations, was integrated with the traditional Industrial Engineering design process methodology. Feasible alternatives were developed and evaluated based on the objectives. The selected …

Design Of An Automated Employee Scheduling System, Matthew Cameron, Yuriy Goldman

Industrial and Manufacturing Engineering

Many retail stores, as well as other organizations that employ a multitude of part-time employees, rely on developing schedules frequently, since the availabilities of the employees as well as the needs of the business change often. This process is often performed on a weekly basis, and is complex and time-consuming. The schedule must typically satisfy numerous requirements, including business needs, legal restrictions, and employee availability constraints. As a result, errors are common, and employee time that could have been spent on improving sales or operations is instead consumed by the scheduling task.

This project explores two solution methods for this …

Atk's Radial Airframe Forming Process Assessment, Andres Martinez

Industrial and Manufacturing Engineering

The purpose of this project was to provide ATK with a solution to increase efficiency in the R-02 radial forming center so that it could meet the increase in demand projected for the next 5 years. In addition, give ATK projected dates of when new machines would need to be implemented to be able to keep up with the demand. The system was analyzed through time studies to identify areas of possible improvement and eliminate any non-value added activities. Cycle times of each activity were used to simulate the current state of the system using ProModel software. Changes in operations …

Restaurant Design: An Industrial Engineering Perspective, Joseph Travis Spanu

Industrial and Manufacturing Engineering

The objective of this paper is to design a health food restaurant using current industrial engineering tools and practices. This includes creating a menu, determining the average gross profit per customer, determining the location, designing a 3-d layout, simulating service, and analyzing local food supply chains. Using a simplified menu and pricing quotes from a food distributor, the average gross profit per customer is estimated to be $3.50. Location is determined by comparing the predicted number of customers and the cost to rent at two different areas. A downtown location is determined to gross approximately $5,200 per month over a …

Women's High Heel Discomfort Analysis And Prototype Solution, Kevin Blakley, Annamarie Kepple

Industrial and Manufacturing Engineering

ABSTRACT

WOMEN’S HIGH HEEL DISCOMFORT ANALYSIS AND SOLUTION

Kevin Blakley and Annamarie Kepple

Women love high heeled shoes, but this love comes at the cost of comfort. Wearing high heels causes a lot of pain and, in the long term, health complications. This project tries to overcome the problem by ultimately making high heels more comfortable. In order to do this, one must first understand the reasons that high heels are uncomfortable, such as arch angle, heel height, and the changes in walking motion. Once there is a true understanding of the factors that contribute to high heel discomfort, the …

Rfid Technology Selection And Economic Justification For Healthcare Asset Tracking, Tyler Robert Peabody, Tali Freed

Master's Theses

Although Radio Frequency Identification (RFID) and Real-Time Location System (RTLS) technologies for inventory tracking have been growing in popularity, the healthcare industry has been reluctant to adopt these technologies. One of the primary reasons for this lack of enthusiasm has been the risk associated with electromagnetic interference between RFID/RTLS systems and medical equipment functionality. The other reason has been the substantial cost and complexity of implementing RFID/RTLS in healthcare organizations. In this study, we show that there are several ways to safely install RFID/RTLS systems to improve the inventory management processes of hospitals and clinics. We then analyze the inventory …