Industrial Engineering Commons^™

Identification Of Patterns And Disruptions In Ambient Sensor Data From Private Homes, Yan Wang

USF Tampa Graduate Theses and Dissertations

The world’s population is rapidly aging and the increasing demand for home and health care services from this aging population brings unprecedented challenges to the economy and society. Ambient-assisted smart homes, residences equipped with ambient sensors to monitor the resident’s daily activities in a continuous and unobtrusive way, present great potential to manage the growing care service needs of this older population segment, and enable them to age-in-place.

Despite growing research, using ambient sensor data from private homes to monitor daily activities, health and wellness still faces significant challenges. To study ambient sensor data from private homes where annotated data …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Stakeholder Engagement In Marine Spatial Planning Of Bangladesh, Mohammad Samsul Mannan

World Maritime University Dissertations

No abstract provided.

Identifying Relationships Of Interest In Complex Environments By Using Channel Theory, Andreas Bildstein, Junkang Feng

Communications of the IIMA

Complex environments show a high degree of dynamics caused by vital interactions between objects within those environments and alterations through which the set of objects and their characteristics within those environments go over time. Within this work, we show that we can tame the level of complexity in dynamic environments by identifying ‘relationships of interest’ between objects in such environments. To this end, we apply the theory of Information Flow, also known as Channel Theory, to the application area of smart manufacturing. We enhance the way how the Channel Theory has been applied so far by using an …

Probabilistic Models For Order-Picking Operations With Multiple In-The-Aisle Pick Positions, Jingming Liu

Graduate Theses and Dissertations

The development of probability density functions (pdfs) for travel time of a narrow aisle lift truck (NALT) and an automated storage and retrieval (AS/R) machine is the focus of the dissertation. The multiple in-the-aisle pick positions (MIAPP) order picking system can be modeled as an M/G/1 queueing problem in which storage and retrieval requests are the customers and the vehicle (NALT or AS/R machine) is the server. Service time is the sum of travel time and the deterministic time to pick up and deposit a pallet (TPD).

Our first contribution is the development of travel time pdfs for retrieval operations …

Research Methodology Adopted In Developing Tansse-L System, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Research methodology is among the very important part in a research work. It is the heart which describe the activities necessary for the completion of the research work. Research methodology provides a plan of investigation considered to obtain answers to research problems and it depends on the context of application. This paper presents the research methodology adopted when developing Tanzania Secondary Schools e-Learning (TanSSe-L) system, a learning management system (LMS) which was successfully developed through customization of Moodle open source LMS. TanSSe-L system is a context centered platform for secondary schools in Tanzania. TanSSe-L system was developed using a number …

Material Flow Analysis As A Decision Supporting Tool For Faecal Sludge Resource Recovery: Mathematical Formulation And Quantification, Isabela Thomas Mkude

Tanzania Journal of Engineering and Technology (TJET)

In this work, a conceptual framework for faecal sludge (FS) management and resource recovery in Dar es Salaam city was developed. Material Flow Analysis (MFA) approach was used to assess and quantify the current materials and nutrients to support on decisions for nutrient recovery and minimize environmental pollution in three unplanned settlements of Manzese, Keko and Kipawa in Dar es Salaam city. Nitrogen and Phosphorus were chosen as indicators for the evaluation of the process. The results showed that about 75% of the Dar es Salaam city population relies on pit latrines and 15% connected to septic tanks, translating to …

Development And Initial Evaluation Of A Reinforced Cue Detection Model To Assess Situation Awareness In Commercial Aircraft Cockpits, Aysen K. Taylor

Engineering Management & Systems Engineering Theses & Dissertations

Commercial transport aircraft of today vary greatly from early aircraft with regards to how the aircraft are controlled and the feedback provided from the machine to the human operator. Over time, as avionics systems became more automated, pilots had less direct control over their aircraft. Much research exists in the literature about automation issues, and several major accidents over the last twenty years spurred interest about how to maintain the benefits of automation while improving the overall human-machine interaction as the pilot is considered the last line of defense.

An important reason for maintaining or even improving overall pilot situation …

Quantifying Impact Of Cyber Actions On Missions Or Business Processes: A Multilayer Propagative Approach, Unal Tatar

Engineering Management & Systems Engineering Theses & Dissertations

Ensuring the security of cyberspace is one of the most significant challenges of the modern world because of its complexity. As the cyber environment is getting more integrated with the real world, the direct impact of cybersecurity problems on actual business frequently occur. Therefore, operational and strategic decision makers in particular need to understand the cyber environment and its potential impact on business. Cyber risk has become a top agenda item for businesses all over the world and is listed as one of the most serious global risks with significant financial implications for businesses.

Risk analysis is one of the …

Fracture Toughness And Fatigue Crack Growth Rate Characterization Of Inconel 718 Formed By Laser Powder Bed Fusion, Charles C. Hohnbaum

Theses and Dissertations

Continuing improvement in the field of AM of metals provides the opportunity for direct fabrication of aerospace parts. AM was once used in large part for rapid prototyping but improvements in technology and increases in the knowledge base of AM materials has provided the opportunity for manufacture of AM parts for operational use. The ability to create low numbers of unique parts without having to invest in expensive tooling provides great economic incentive to utilize this technique. IN718 is the most common high temperature alloy used in the aerospace industry and lends itself readily to formation by LPBF. The superior …

A Study Of Perceptions On Incident Response Exercises, Information Sharing, Situational Awareness, And Incident Response Planning In Power Grid Utilities, Joseph Garmon

Electronic Theses and Dissertations

The power grid is facing increasing risks from a cybersecurity attack. Attacks that shut off electricity in Ukraine have already occurred, and successful compromises of the power grid that did not shut off electricity to customers have been privately disclosed in North America. The objective of this study is to identify how perceptions of various factors emphasized in the electric sector affect incident response planning. Methods used include a survey of 229 power grid personnel and the use of partial least squares structural equation modeling to identify causal relationships. This study reveals the relationships between perceptions by personnel responsible for …

Reliability Estimation Of Reciprocating Seals Based On Multivariate Dependence Analysis And It's Experimental Validation, Chao Zhang, Rentong Chen, Shaoping Wang, Yujie Qian, Mileta M. Tomovic

Engineering Technology Faculty Publications

Accurate reliability estimation for reciprocating seals is of great significance due to their wide use in numerous engineering applications. This work proposes a reliability estimation method for reciprocating seals based on multivariate dependence analysis of different performance indicators. Degradation behavior corresponding to each performance indicator is first described by the Wiener process. Dependence among different performance indicators is then captured using D-vine copula, and a weight-based copula selection method is utilized to determine the optimal bivariate copula for each dependence relationship. A two-stage Bayesian method is used to estimate the parameters in the proposed model. Finally, a reciprocating seal degradation …

Natural Resources Governance Employing Blockchain-Based Decision-Making, Farinaz Sabz Ali Pour, Adrian Gheorghe

Engineering Management & Systems Engineering Faculty Publications

Natural resources are essential structures of socio-economic systems which shape the well-being of humanity, environment, and the economy. Human actions have become the critical responsibility for environmental changes and pressuring many planetary boundaries. Having a systematic approach can provide a governance platform including the inherent characteristics of the resource, the historically established form of use, and transaction costs. A natural resource governance framework is developed by applying Blockchain technology as the primary goal of this study to regulate and manage the extraction and trades. Blockchain technology provides a distributed concurrency monitoring system for sustainable resource management. Persistent and pervasive cooperation …

Pharmaceutical Scheduling Using Simulated Annealing And Steepest Descent Method, Bryant Jamison Spencer

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the pharmaceutical manufacturing world, a deadline could be the difference between losing a multimillion-dollar contract or extending it. This, among many other reasons, is why good scheduling methods are vital. This problem report addresses Flexible Flowshop (FF) scheduling using Simulated Annealing (SA) in conjunction with the Steepest Descent heuristic (SD).

FF is a generalized version of the flowshop problem, where each product goes through S number of stages, where each stage has M number of machines. As opposed to a normal flowshop problem, all ‘jobs’ do not have to flow in the same sequence from stage to stage. The …

Collaborative Robotic Path Planning For Industrial Spraying Operations On Complex Geometries, Steven Brown

Graduate Theses and Dissertations

Implementation of automated robotic solutions for complex tasks currently faces a few major hurdles. For instance, lack of effective sensing and task variability – especially in high-mix/low-volume processes – creates too much uncertainty to reliably hard-code a robotic work cell. Current collaborative frameworks generally focus on integrating the sensing required for a physically collaborative implementation. While this paradigm has proven effective for mitigating uncertainty by mixing human cognitive function and fine motor skills with robotic strength and repeatability, there are many instances where physical interaction is impractical but human reasoning and task knowledge is still needed. The proposed framework consists …

Budget-Constrained Regression Model Selection Using Mixed Integer Nonlinear Programming, Jingying Zhang

Graduate Theses and Dissertations

Regression analysis fits predictive models to data on a response variable and corresponding values for a set of explanatory variables. Often data on the explanatory variables come at a cost from commercial databases, so the available budget may limit which ones are used in the final model.

In this dissertation, two budget-constrained regression models are proposed for continuous and categorical variables respectively using Mixed Integer Nonlinear Programming (MINLP) to choose the explanatory variables to be included in solutions. First, we propose a budget-constrained linear regression model for continuous response variables. Properties such as solvability and global optimality of the proposed …

Identifying Key Factors Associated With High Risk Asthma Patients To Reduce The Cost Of Health Resources Utilization, Amani Ahmad

LSU Master's Theses

Asthma is associated with frequent use of primary health services and places a burden on the United States economy. Identifying key factors associated with increased cost of asthma is an essential step to improve practices of asthma management.

The aim of this study was to identify factors associated with over utilization of primary health services and increased cost via claims data and to explore the effectiveness of case management program in reducing overall asthma related cost.

Claims data analysis for Medicaid insured asthma patients in Louisiana was conducted. Asthma patients were identified using their ICD-9 and ICD-10 codes, forward variable …

Efvs Effects On Pilot Performance, Michael Campbell, Nsikak Udo-Imeh, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

Flight tests have been conducted at Purdue University using a computer-based flying simulator in an attempt to determine and measure the effects of Enhanced Flight Vision Systems (EFVS) on the performance of pilots during landing. Knowledge of these effects could help guide future design and implementation of EFVS in modern commercial aircraft, and further increase pilots’ ability to control the aircraft in low-visibility conditions. The problem that has faced researchers in the past has revolved around the difficulty in interpreting the data which is generated by these tests. The difficulty in making a generalized conclusion based on the large amount …

A Framework For Executable Systems Modeling, Matthew Amissah

Engineering Management & Systems Engineering Theses & Dissertations

Systems Modeling Language (SysML), like its parent language, the Unified Modeling Language (UML), consists of a number of independently derived model languages (i.e. state charts, activity models etc.) which have been co-opted into a single modeling framework. This, together with the lack of an overarching meta-model that supports uniform semantics across the various diagram types, has resulted in a large unwieldy and informal language schema. Additionally, SysML does not offer a built in framework for managing time and the scheduling of time based events in a simulation.

In response to these challenges, a number of auxiliary standards have been offered …

Risk Assessment Of Dropped Cylindrical Objects In Offshore Operations, Adelina Steven

LSU New Orleans Theses and Dissertations

Dropped object are defined as any object that fall under its own weight from a previously static position or fell due to an applied force from equipment or a moving object. It is among the top ten causes of injuries and fatality in oil and gas industry. To solve this problem, several in-house tools and guidelines is developed over time to assess the risk of dropped objects on the sub-sea structures. This thesis focuses on compiling and comparing those methods in hope to improve the recommended practices available in the market. A simple modification is done on the in-house tools …

Bi-Directional Testing For Change Point Detection In Poisson Processes, Moinak Bhaduri

UNLV Theses, Dissertations, Professional Papers, and Capstones

Point processes often serve as a natural language to chronicle an event's temporal evolution, and significant changes in the flow, synonymous with non-stationarity, are usually triggered by assignable and frequently preventable causes, often heralding devastating ramifications. Examples include amplified restlessness of a volcano, increased frequencies of airplane crashes, hurricanes, mining mishaps, among others. Guessing these time points of changes, therefore, merits utmost care. Switching the way time traditionally propagates, we posit a new genre of bidirectional tests which, despite a frugal construct, prove to be exceedingly efficient in culling out non-stationarity under a wide spectrum of environments. A journey surveying …

Multi Self-Adapting Particle Swarm Optimization Algorithm (Msapso)., Gerhard Koch

Electronic Theses and Dissertations

The performance and stability of the Particle Swarm Optimization algorithm depends on parameters that are typically tuned manually or adapted based on knowledge from empirical parameter studies. Such parameter selection is ineffectual when faced with a broad range of problem types, which often hinders the adoption of PSO to real world problems. This dissertation develops a dynamic self-optimization approach for the respective parameters (inertia weight, social and cognition). The effects of self-adaption for the optimal balance between superior performance (convergence) and the robustness (divergence) of the algorithm with regard to both simple and complex benchmark functions is investigated. This work …

Data-Driven Modeling For Decision Support Systems And Treatment Management In Personalized Healthcare, Milad Zafar Nezhad

Wayne State University Dissertations

Massive amount of electronic medical records (EMRs) accumulating from patients and populations motivates clinicians and data scientists to collaborate for the advanced analytics to create knowledge that is essential to address the extensive personalized insights needed for patients, clinicians, providers, scientists, and health policy makers. Learning from large and complicated data is using extensively in marketing and commercial enterprises to generate personalized recommendations. Recently the medical research community focuses to take the benefits of big data analytic approaches and moves to personalized (precision) medicine. So, it is a significant period in healthcare and medicine for transferring to a new paradigm. …

The Impact Of Machine Learning Algorithms On Benchmarking Process In Healthcare Service Delivery, Egbe-Etu Emmanuel Etu

Wayne State University Theses

Currently, organizations have adopted and implemented a variety of innovative quality management philosophies, approaches, and techniques to stay competitive in an ever-changing global economy. Benchmarking is one of such techniques deployed by organizations to stay competitive. The motivation for this research stems from a real-world problem being faced by hospitals in the healthcare industry who have amassed a ton of data and want to embark on benchmarking project to assess the performance of the emergency departments due to challenges faced with poor management of operations which has led to high patient boarding rates, high patient wait-times, poor quality service, low …

Extraction Of Fiber Morphology From Sem Images For Quality Control Of Fiber Reinforced Composites Manufacturing, Md Fashiar Rahman

Open Access Theses & Dissertations

The morphology of fibers (e.g. spatial uniformity, orientation, and length) plays a decisive role in determining the material properties or fabrication quality of fiber-reinforced nanocomposites. Hence, determining the morphology becomes a very critical issue in the field of nanocomposite quality control. The conventional way of quality inspection is to take the scanning electron microscopic (SEM) images of the cross-section of composite material and do the visual checking of these SEM images to evaluate the nanofiber alignment and length distribution. But this type of inspection is often subjective, inaccurate and time consuming. Moreover, the extremely small size of nanofibers makes the …

Split-Merge Model Of Workunit Replication In Distributed Computing, Alexander Rumyantsev, Srinivas R. Chakravarthy

Industrial & Manufacturing Engineering Presentations And Conference Materials

No abstract provided.

Predictive Power And Validity Of Connectome Predictive Modeling: A Replication And Extension, Michael Wang, Joaquin Goni, Enrico Amico

The Summer Undergraduate Research Fellowship (SURF) Symposium

Neuroimaging, particularly functional magnetic resonance imaging (fMRI), is a rapidly growing research area and has applications ranging from disease classification to understanding neural development. With new advancements in imaging technology, researchers must employ new techniques to accommodate the influx of high resolution data sets. Here, we replicate a new technique: connectome-based predictive modeling (CPM), which constructs a linear predictive model of brain connectivity and behavior. CPM’s advantages over classic machine learning techniques include its relative ease of implementation and transparency compared to “black box” opaqueness and complexity. Is this method efficient, powerful, and reliable in the prediction of behavioral measures …

An Economic Analysis Of Residential Photovoltaic Systems With And Without Energy Storage, Rodney Moses Kizito

Graduate Theses and Dissertations

Residential photovoltaic (PV) systems serve as a source of electricity generation that is separate from the traditional utilities. Investor investment into residential PV systems provides several financial benefits such as federal tax credit incentives for installation, net metering credit from excess generated electricity added back to the grid, and savings in price per kilowatt-hour (kWh) from the PV system generation versus the increasing conventional utility price per kWh. As much benefit as stand-alone PV systems present, the incorporation of energy storage yields even greater benefits. Energy storage (ES) is capable of storing unused PV provided energy from daytime periods of …

Ict Adoption And Use In Tanzania Smes, Cuthbert Msuya

Tanzania Journal of Engineering and Technology (TJET)

The purpose of this paper was to establish the status of ICTs adoption and use in Tanzania SMEs. Previously, it was shown that there is a shortage of comprehensive, accurate and up to date data on many aspects of the SMEs sector including the level of ICT adoption and use. This has affected government efforts aimed at development of this important sector in the economic development of the country. Results show that: (i) By year 2014, adoption of ICTs in SMEs had grown from almost non-existence in year 2004 to 80.1% computer technology use, and over 56.6% for use of …