Industrial Engineering Commons^™

Ultrasonic Nondestructive Evaluation Of Metal Additive Manufacturing., Venkata Karthik Nadimpalli

Electronic Theses and Dissertations

Metal Additive Manufacturing (AM) is increasingly being used to make functional components. One of the barriers for AM components to become mainstream is the difficulty to certify them. AM components can have widely different properties based on process parameters. Improving an AM processes requires an understanding of process-structure-property correlations, which can be gathered in-situ and post-process through nondestructive and destructive methods. In this study, two metal AM processes were studied, the first is Ultrasonic Additive Manufacturing (UAM) and the second is Laser Powder Bed Fusion (L-PBF). The typical problems with UAM components are inter-layer and inter-track defects. To improve the …

Manufacturing Process Simulation – On Its Way To Industrial Application, Dennis Otten, Tobias A. Weber, Jan-Christoph Arent

International Journal of Aviation, Aeronautics, and Aerospace

Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview …

Sensel Morph: Product Communication Improvement Initiative, Kasper W. Lui-Delange, Samuel Distler, Rafael Paroli

Industrial and Manufacturing Engineering

Sensel is a startup company that recently launched their first product. The Morph is a multi-functional touch interface that interacts with a wide range of software through touching enabled silicon overlays. The support documentation was believed to cause confusion, which is leading to limited sales and increased returns. We focused on the structures of its website and product documentation, which were initially developed without end user testing. Our team explored Sensel’s current state to develop two multiphase design alternatives. These designs provide multiple user-facing testing frameworks as well as determine the root-cause of the Morph’s current communication issues. The designs …

Improving Warehouse Capacity For Synergy Manufacturing, Brian Garcia

Industrial and Manufacturing Engineering

This report aims to aid Synergy Manufacturing (a well-recognized producer of high-performance components for off-roading vehicles) to improve in-house production capacity in wake of an expanded facility space and substantial increase in the number of current available products over the span of a few years. Current warehouse issues include struggling to meet demand, high inventory, and an unsafe overcrowding of WIP on the floor space. The steps taken to resolve these issues are to collect setup times, operational times, total process times, machine tool usage, and flow process from a selected group of five high-demand items from Synergy Manufacturing’s current …

Building A Database For A Startup: Boltabout, Danielle Tran

Industrial and Manufacturing Engineering

BoltAbout is a young start-up based out of San Luis Obispo, CA. Their primary business is renting out bikes via monthly-subscription with the opportunity to lease to own. BoltAbout has seen great success over the past 2 years and is looking to expand. The company currently has 200 bikes, but the demand is far outweighing the supply. The CEO of BoltAbout hopes to grow to grow the company’s inventory to 500 bikes by the end of 2017 and 1500 by the end of the school year. As the company continues to expand, it will need to be able to accurately …

Crystal Engineering Manufacturing Facility Analysis, Maximiliano Cortes, Eric Dustin Kornrumpf, Sthefano Alvarado

Industrial and Manufacturing Engineering

This report will encompass a two-quarter long senior project effort to provide a recommendation for the client, Crystal Engineering. Crystal Engineering is currently in the process of introducing three new products, one now and two within the next six months. However, their existing lines already occupy the available production space and as a result, they are unable to determine how to effectively incorporate new production lines within the facility. Therefore, the main objectives of this project were to deliver several facility redesign layouts backed by a holistic justification for each. The formulation of the facility redesign layouts incorporated several industrial …

Student Shop Access And Inventory Control In The College Of Architecture And Environmental Design Shops, Ryan Raj Mattel, Chris Steven Chen, Kevin Michael Gallagher

Industrial and Manufacturing Engineering

The Cal Poly College of Architecture and Environmental Design shops, directed by David Kempken, give the opportunity for thousands of students to use the “Learn By Doing” philosophy and operate various machinery, tooling, and devices to complete projects inside and outside of the classroom. These students are able to check out tools and machinery to complete these projects on a weekly basis. This report will discuss the complexities and shortcomings of the current database system, FileMaker Pro, that is used for these transactions. The report will furthermore discuss the design and methodology of replacing this system with an improved integrated …

Reducing Same Day Missed Appointments, Lucas Madison, Tyler Moore, Jolani Chun-Moy

Industrial and Manufacturing Engineering

Radiology Associates (RA) is a diagnostic imaging center that offers high-quality, digital medical imaging and interventional radiology services for patients, physicians and healthcare organizations across the Central Coast. They are an ongoing problem that involves a considerable portion of their patients not showing up for their appointments Our project aims to reduce same day missed appointments at Radiology Associates. Radiology Associates currently has a no-show rate of 13.48%. They lose approximately $240 for every same day missed appointment. Our goal was to find new ways to reduce their no-show rate to 8%. Based on our calculations, Radiology Associates could save …

Benchmarking Environmental Efficiency Of Ports Using Data Mining And Rdea: The Case Of A U.S. Container Ports, Yong Shin Park, N. Muhammad Aslaam Mohamed Abdul Ghani, Fesseha Gebremikael, Gokhan Egilmez

Mechanical and Industrial Engineering Faculty Publications

This study provides step-wise benchmarking practices of each port to enhance the environmental performance using a joint application of the data-mining technique referred to as Kohonen’s self-organizing map (KSOM) and recursive data envelopment analysis (RDEA) to address the limitation of the conventional data envelopment analysis. A sample of 20 container ports in the U.S.A. were selected, and data on input variables (number of quay crane, acres, berth and depth) and output variables (number of calls, throughput and deadweight tonnage, and CO2 emissions) are used for data analysis. Among the selected samples, eight container ports are found to be environmentally inefficient. …

Regression Analysis Of Factors Impacting Problem Solving Engagement Within Lean Systems Implementation, David M. Parsley Ii

Theses and Dissertations--Mechanical and Aerospace Engineering

Organizations around the world have attempted to implement the concepts of the Toyota Production System (TPS), commonly referred to as Lean, with limited sustainable success. The central principles of TPS, continuous improvement and respect for people, are grounded in the Japanese values of Monozukuri and Hitozukuri. Monozukuri deals with creating or making a product, while Hitozukuri conveys the idea of developing people through learning. In order for organizations to adopt these values they must have a system that engages employees at all levels in applying problem solving to improve their work. This research uses organizational assessments obtained from a variety …

Inspection Process Flow Development For A Warehouse, Pahalawaththage Perera

All Graduate Theses, Dissertations, and Other Capstone Projects

The project is based on a medical device outsourcing company in the US. In 2018 the company added a 44,000 sq ft new warehouse. With the scales of growth and market competition, it has come to a need to optimize production capacity to achieve 98% monthly on time delivery target. Optimizing production capacity comes with efficiently managing operations that impact overall product lead time. A primary factor that impacts the overall product lead time is production preparation time. Production preparation time is impacted by lead times of 3 operations managed by the new warehouse - Receiving Inspection, Incoming Inspection, and …

Predictive Modeling On The Piezoelectric Properties Of 3d Printed Functional Nanocomposites Using The Data Analytics Approach, Md Didarul Islam

Open Access Theses & Dissertations

This paper presents research done on prediction modeling using a data analytics approach to determine various factors affecting the piezoelectric properties of the 3D printed pressure sensors. Previously, the material extrusion 3D printing technique was used to fabricate pressure sensors composed of multiwall carbon nanotubes (CNT), barium titanate (BT), and polyvinylidene fluoride (PVDF) using simple fabrication and low-cost methods. This sensor produced a voltage output of 725 mV (0.13 pC/N) which is enough for pressure sensing applications. However, a holistic study to determine impacts of all factors was not carried out in the previous model. In this study, the design …

Achieving Totally Local Anticoagulation On Blood Contacting Devices, Rana Gbyli, Anna Mercaldi, Harihara Sundaram, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

The recent years have witnessed an increased activity in biocompatibility research aimed at limiting biomaterial-induced blood coagulation. From 2008 to 2016, a total of $36,946,764.00 USD was awarded in grants to 213 research proposals and as large as 50.4% ($18,627,854.00) of that award monies were distributed to 101 proposals over the fiscal years of FY14 to FY16 alone. However, the complexity in blood responses to biomaterials, variability in blood function between individuals and animal species, and differences in medical device application and test setting all continue to pose difficulties in making a breakthrough in this field. This review focuses on …

Process Management And Design Layout Of High Throughput Screening, Anthony Vasquez, Kyle Dupuy

Industrial and Manufacturing Engineering

Calibr is a pharmaceutical company in San Diego and growing very quickly rate and need help redesigning their lab layout and in doing so reducing their cycle times and down times in machines. In addition to this, they do not currently have an accurate measurement of how long their processes take in an overall cycle. The objective of this project is to provide Calibr with a redesigned layout to accommodate new equipment as well as a software tool that can output Gantt charts for their planning of their testing. Our approach to this project first included mapping out the facilities …

An Economic Analysis Of Residential Photovoltaic Systems With And Without Energy Storage, Rodney Moses Kizito

Graduate Theses and Dissertations

Residential photovoltaic (PV) systems serve as a source of electricity generation that is separate from the traditional utilities. Investor investment into residential PV systems provides several financial benefits such as federal tax credit incentives for installation, net metering credit from excess generated electricity added back to the grid, and savings in price per kilowatt-hour (kWh) from the PV system generation versus the increasing conventional utility price per kWh. As much benefit as stand-alone PV systems present, the incorporation of energy storage yields even greater benefits. Energy storage (ES) is capable of storing unused PV provided energy from daytime periods of …

Design And Manufacture Of A Waste Compactor Prototype: A Step Towards Implementing A Non-Burn Health Care Waste Disposal In Developing Countries, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

Non-burn technology is the only safe way of handling and disposing infectious healthcare waste. It involves steam treatment of infectious waste at temperatures higher than 121 o C for a minimum of 30 minutes before disposing them just like other municipal waste. Infectious healthcare waste is normally only about 10 25% of all healthcare waste. In this paper, design, manufacturing and testing of a waste compactor for reducing waste volume to facilitate its handling is discussed. Preliminary tests show that the waste volume can be reduced to less than 10% of its original volume using the developed compactor. Waste compactors …

Multi-Criteria Flow-Shop Scheduling Optimization, Raviteja Arikati

Industrial and Manufacturing Engineering

A flow-shop is a type of manufacturing job shop where similar jobs follow a similar, linear sequence through the shop. Every day, flow-shops receive several different orders and it is up to the scheduler to plan the daily schedule. This schedule should be designed to prevent bottlenecks in the shop, to have on-time delivery of products, and satisfy several other requirements. Often, schedulers perform subjective scheduling and utilize simple heuristics or just intuition to schedule the jobs. With computer-based scheduling, schedulers can now create schedules and determine quantitatively what sorts of schedules work best. Currently, much of the computer-based schedules …

Polar Coordinate Farm Bot Final Project Report, John Brown, Kasenia Colombo, Lucas Salem, Ning Jeng, Rory Stothers, Sam Lees

Industrial and Manufacturing Engineering

FarmBot Inc. is a local startup that is advancing precision agriculture through automation and open source technology. The original FarmBot model, FarmBot Genesis, operates over a rectangular area of 3 x 1.5 meters. It plants, waters, weeds and grows produce autonomously using CNC technology. Our project sponsor and inventor of FarmBot, Rory Aronson, tasked our team with developing and testing a polar coordinate farmbot capable of performing on par with the Cartesian farmbot in growing a circular vegetable garden in a user’s backyard. A successful project was defined by meeting specific customer requirements and engineering specifications predetermined and discussed with …

Design Of An Automated Welding Process For Synergy Mfg., Parsa Bakhtiari

Industrial and Manufacturing Engineering

This senior project involves a partnership with a local off-road parts manufacturer called Synergy Mfg. Synergy is experiencing a rapid increase in demand that is difficult to meet with their current processes. Because of this issue, Synergy is exploring automation in order to decrease their cycle times and increase their production output. More specifically, this report concentrates on automating a manual welding process that has a lengthy cycle time which causes Synergy’s difficulties with meeting demand. Due to time constraints, this project focused on the automation of a welding process for only one part that Synergy produces. This part contains …

Predictive Analytics In Forecasting, Matthew Suarez

Industrial and Manufacturing Engineering

Predicting future demand can be of tremendous help to businesses in scheduling and allocating appropriate amounts of material and labor. The more accurate these predictions are, the more the business will save money by matching supply with demand as closely as possible. The approach for an accurate forecast, and the goal of this project, involves using data analytics techniques on past historical sales data. Working with Campus Dining, a year's worth of their daily sales data will be analyzed and ultimately used for the end result of both an accurate forecasting technique and a way to display the results in …

Design Of A Finger Lime Loading System, Joel Jameson Hitchen

Industrial and Manufacturing Engineering

Automation for post harvest processing of finger limes is required to meet demand for the new citrus fruit being introduced to United States of America food and agriculture market. As labor wages rise, and demand climbs for finger lime product a creative solution is needed to eliminate human labor and reduce the manual input needed to process finger limes. Building on an already successful processing tool, a semi-­automated loading system was designed and implemented to overcome the problem.

Strategic Level Proton Therapy Patient Admission Planning: A Markov Decision Process Modeling Approach, Shengfan Zhang, Ridvan Gedik, Chase Rainwater

Mechanical and Industrial Engineering Faculty Publications

A relatively new consideration in proton therapy planning is the requirement that the mix of patients treated from different categories satisfy desired mix percentages. Deviations from these percentages and their impacts on operational capabilities are of particular interest to healthcare planners. In this study, we investigate intelligent ways of admitting patients to a proton therapy facility that maximize the total expected number of treatment sessions (fractions) delivered to patients in a planning period with stochastic patient arrivals and penalize the deviation from the patient mix restrictions. We propose a Markov Decision Process (MDP) model that provides very useful insights in …

Design For Waste Reduction And Efficiency Improvement For The Construction Usage Of The Tower Crane, George Merida, Roman Richard

Industrial and Manufacturing Engineering

Webcor Concrete Group’s on-site tower crane is currently experiencing unknown forms of inefficiency. The project team used the DMAIC methodology to implement Define, Measure, Analyze, Improve, and Control in order to guide and structure the project. After the project team formulated a problem statement, observations were collected of tower crane deliveries resulting in 470 individual data points. The data was then analyzed using basic statistics, histograms, and lean manufacturing tools in order to identify wastes and inefficiencies. Once the wastes and inefficiencies were identified, root cause analysis was performed. The identified root causes were then used as the basis for …

Designing An Information System To Efficiently Coordinate Film Screenings, Galen Dougherty

Industrial and Manufacturing Engineering

This paper explains the engineering concepts design efforts used to build an information system to efficiently coordinate film screenings. The market served is an emerging group of film makers and production companies that have limited resources. The application aims to save both time and money in coordination efforts for screening films in the local community. The project case examined is a small production start-up from Cal Poly San Luis Obispo named Yellow Glass Media. The design described in the paper specifically targets their needs which are assumed to be representative of the needs of the larger emerging market. The design …

Design Of Process Improvements To Increase Field Work Efficiency At Webcor Concrete Group, Fiona Blackburn

Industrial and Manufacturing Engineering

This study set out to analyze and improve field work efficiency at Webcor Concrete Group, a subcontractor working on a new housing project at the Cal Poly, San Luis Obispo campus. Specifically, they would like to access their performance in regards to end-of-break to back-to-work time and the 30-30 rule, which states that everything a field worker needs should be accessible within 30 seconds or 30 feet. The problem statement is that Webcor wishes to utilize their field hours 5% more efficiently through a study of current shortcomings and recommended improvements. A review of the literature generated process improvement ideas …

Design Of An Improved Toolbox And Connex For Webcor Builders, Veronica Ana Valley, Jamie Mari Kusumoto

Industrial and Manufacturing Engineering

Webcor builders asked the Senior Project team to create a design of an organized job box on Solidworks that improves worker efficiency, improves jobsite organization, and limits financial losses, which are common tool-related issues for the company. As a group, the members analyzed the job box current situation using multiple perspectives to create two designs, one streamlined by each project group member. The project group developed each of the designs based on a current state analysis in which we analyzed the job box, simulated finding tools to create multiple motion studies, collected worker feedback, conducted an ergonomic analysis, conducted a …

Redesign Of Good Karma Bike’S Facility Layout And Bike Storage Process, Ryan Phillip Ogan, Derek Chung, Tommy Chang

Industrial and Manufacturing Engineering

Good Karma Bikes is a non-profit organization that services and restores bikes that customers bring into the shop. Good Karma Bikes has plans for a dramatic increase in storage capacity for the next few years. Good Karma Bike’s warehouse area is currently overflowing with bikes due to the large increase in demand. A redesign of the warehouse layout is needed to handle the increase of incoming bikes and to improve product flow through the space. The project team’s objectives are to:

• Improve accessibility and reduce time it takes to unrack a bike
• Increase space utilization by improving bike storage capacity …

Design Of Material Flow And Tracking System For Supply Chain And Logistics: E. & J. Gallo Winery – Modesto Campus, Joshua Balland, Angela Mariani

Industrial and Manufacturing Engineering

E. & J. Gallo is a winemaking company located in Modesto, California. Our group was assigned to measure and analyze E. & J. Gallo’s current state process for their 5-Buggies (transportation trailers) to find key areas of inefficiency. After analyzing their current state process, we designed a more efficient flow of materials for the 5-Buggy system within the Automatic Train Loading (ATL) station and found an optimal solution for tracking the 5-Buggies on the Modesto campus. Our project started with preliminary research on fleet management, material management systems, and tracking methodologies. Once these areas of research were fully understood, our …

Design Of A Process To Implement An Annual Community Fundraiser For Sprout Up, Katherine Lynette Phillips, Kimberly Nicole Walter

Industrial and Manufacturing Engineering

Sprout Up—in San Luis Obispo—is currently a non-profit organization that teaches free environmental science education to first and second graders around the San Luis Obispo area. Due to recent circumstances, Sprout Up will soon be losing its non-profit status, and therefore they will be losing their funding as well. Their problem is that they need a stable annual fundraiser that will help the organization continue to provide free services to local elementary schools as a Cal Poly club rather than a non-profit. Multi-criteria analysis techniques were used to determine what would be the best solution to their problem and found …

Reusable Container System Optimization For Smart Cities, Aubrey Gail Sloan, Lukas James Pinkston, Andrew James Seaman

Industrial and Manufacturing Engineering

Federal and local governments are investing in methods to discourage use of disposable containers in order to reduce waste generation and protect the environment. In this project we propose the use of reusable takeout food containers as a replacement for disposable takeout food containers. Reusable takeout container systems may use barcode or RFID (radio frequency identification) technology to track and manage the distribution, collection, cleaning, and end-of-life recycling of reusable takeout food containers. Such systems will require the use of container collection bins. The design and optimization of a network of container collection bins is the topic of this project. …