Industrial Engineering Commons^™

Rapid Manufacturing Of Critical Industrial Parts: A Method Based On Reverse Engineering, Rapid Prototyping, And Coordinate Metrology, Immanuel Edinbarough, Aditya Akundi

Manufacturing & Industrial Engineering Faculty Publications

This paper presents a method of rapidly manufacturing industrial parts that are critical to the production. In order to assist the Advanced Manufacturing industry, a senior project team at the University of Texas Rio Grande Valley (UTRGV) applied Rapid Manufacturing (RM) to manufacture or fabricate critical machine parts used to maintain production machines. Failures of parts and tools in industrial settings cost money and hurt output. Usually, the problem arises when the tooling being used is one of a kind and repair or replacements come with long leadtimes. Other problems are encountered when original part or tool engineering drawing is …

Expanding Engineering And Technology Opportunities To Students In The Border Region Through International Collaboration, Jesus A. Gonzalez-Rodriguez, Immanuel Edinbarough, Adriana Rios-Santiago, Anabel Pineda-Briseno

Manufacturing & Industrial Engineering Faculty Publications

Expanding Engineering and Technology Opportunities to Students in the Border Region through International Collaboration

For some years now, our Department of Engineering Technology of the XXXX, has collaborated with Universities across the southern border to carry out different activities such as undergraduate research, collaborative course-based projects, and senior design projects. We have observed how students benefit from being exposed to work in multidisciplinary and multicultural teams.

We now expand this form of work to a higher-level research collaboration where students and faculty from four different institutions participate. Two institutions of higher education in Mexico and a University and a Community …

Text Mining-Based Qualitative Student Assessment Of Interactive Simulation Learning Using Simio Tool – A Work In Progress, Aditya Akundi, Immanuel Edinbarough

Manufacturing & Industrial Engineering Faculty Publications

Computer simulations complement and extend the real-world components of industries and manufacturing organizations. Teaching simulation-based tools helps students in modeling and analyzing the behavior of real time systems. With the increased demand observed in products and technology consumption, manufacturing industries are evolving to embrace new technologies and initiatives. To keep the emerging workforce technically competent in current tools to understand and interpret manufacturing processes, this paper portrays an effort by the authors in introducing SIMIO i.e. a tool on Simulation of intelligent objects to undergraduate students at University of Texas Rio Grande Valley and in understanding the influence of using …

Hollow-Core Photonic Crystal Fiber Mach–Zehnder Interferometer For Gas Sensing, Kaveh Nazeri, Farid Ahmed, Vahid Ahsani, Hang-Eun Joe, Colin Bradley, Ehsan Toyserkani, Martin B. G. Jun

Manufacturing & Industrial Engineering Faculty Publications

A novel and compact interferometric refractive index (RI) point sensor is developed using hollow-core photonic crystal fiber (HC-PCF) and experimentally demonstrated for high sensitivity detection and measurement of pure gases. To construct the device, the sensing element fiber (HC-PCF) was placed between two single-mode fibers with airgaps at each side. Great measurement repeatability was shown in the cyclic test for the detection of various gases. The RI sensitivity of 4629 nm/RIU was demonstrated in the RI range of 1.0000347–1.000436 for the sensor with an HC-PCF length of 3.3 mm. The sensitivity of the proposed Mach–Zehnder interferometer (MZI) sensor increases when …

Aerial Screw Vtol Rotorcraft, Macale Rielly, Alexa Culp, Thomas Osteen, Adeline Perry

Senior Design Project For Engineers

Known as the “Renaissance Man,” DaVinci’s impressive knowledge of mechanics and inventive prowess would influence engineers and innovators hundreds of years later to make human flight a reality. However, due to the limited capacity of engineering and manufacturing at the time, his invention had been shallowly investigated in a production setting. This project strove to properly acknowledge DaVinci’s invention by thorough examination and critical analysis of his concept with the hopes of gaining a better understanding of why it is considered the “foundation of vertical flight”.

An iterative design approach was employed, utilizing faculty and university resources, team knowledge from …

Utilization And Standardization Of Beverage Based Containers, Michael T. Bobke, Jack C. Maughan, Kenia Vargas

Industrial and Manufacturing Engineering

The purpose of this document is to formally describe and explain all of the decisions associated with the data collection and analysis for this Cal Poly Senior Project. Throughout the project, we will utilize and hone the skills that each team member has developed during our time in Cal Poly's Engineering program. In addition, this document will briefly describe some of Blue Diamond’s history as one of the biggest almond companies in the world. The statement of work will introduce and describe the current status of the beverage base container process and international beverage container design. Next it will discuss …

Rebar Impalement Safety, Spencer C. Nefores, Steven M. Hoover

Industrial and Manufacturing Engineering

This project is sponsored by Webcor with the purpose of finding a better solution to rebar impalement safety. The current rebar impalement safety caps being used by Webcor were found to frequently fall off after being installed. This results in workers being exposed to the hazard for longer than desired. The research that has been done by the team showed that rebar impalement is a serious hazard and results in injury or death every year. Site visits and interviews were performed to aid in understanding the problem and designing solutions. The customer needs, current state of the problem, existing solutions, …

Parklets San Luis, Owen Kenny, Preston Jag Stebel, Leonidas Goodman, Lukas Braun

Industrial and Manufacturing Engineering

Downtown San Luis Obispo has been a popular destination for tourists, students, families, and roadtrippers. However, according to Ryan Betz, Interim Assistant to the City Manager, foot traffic and retail business revenue has been decreasing. Downtown SLO does not have enough free public spaces. Recent projects such as sidewalk bump outs and lighted crosswalks have aimed at making SLO more pedestrian accessible, but they have not actually made downtown more pleasurable. These projects have not seemed to drive any more business or traffic downtown. There are a myriad of ways to rectify this; studies show that having a free place …

Development And Experimental Investigation Of Modular Crates For Industrial Packaging Applications, Marshal Louie, Kumar B

Journal of Applied Packaging Research

For the increased product varieties, engineered plywood crate production technique could not facilitate box size optimization. This paper investigates the implementation of modularity function onto the plywood crate to resize the pack cube volume on customer requirement and to reduce space wastage inside the box. This is achieved by using a new joint technique called “Flat- Post Tongue Joint”. The full-sized experimental work is carried out comprising Flexural test analysis on Flat-Post Tongue joint, Tensile test analysis on tongue joint and Box Compression Test analysis on the two developed models of modular crates namely Modifiable Reinforced Plywood Crate (MRPC) and …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Effects Of Chemically Assisted Magnetic Abrasive Finishing Process Parameters On Material Removal Of Inconel 625 Tubes, Gurpreet Singh, Harish Kumar, Harmesh Kumar Kansal, Anil K. Srivastava

Manufacturing & Industrial Engineering Faculty Publications

With technological developments in manufacturing fields, many advanced materials and alloys have been introduced to fulfill industrial requirements. One of such type of advanced materials, Inconel 625 possesses superior materialistic properties and finds number of industrial applications in Aerospace, Marine, Petro-chemical and Solar power stations etc. However, machining and finishing of Inconel 625 components are still remain difficult tasks to deals with. A recently developed finishing process: Magnetic Abrasive Finishing (MAF) process has been experimented to finish Inconel 625 surfaces but this process is not much effective to finish and machine Inconel 625 work surfaces. In present work, Chemically assisted …

A Hybrid Physical Model Based Artificial Neural Network Approach To Predict Surface Texture In The Honing Of Engine Cylinder Bore, Burhan Afzel, Xueping Zhang, Anil K. Srivastava

Manufacturing & Industrial Engineering Faculty Publications

This study proposes a hybrid model that utilizes a physical model and Artificial Neural Networks (ANN) approach to predict surface roughness during cylinder bore honing with an improved prediction efficiency of 90% compared to the standalone physical model. As a critical component of internal combustion engine technology, improvement in the surface roughness of cylinder bore can significantly reduce friction, wear and oil consumption, resulting in improved engine performance. Desired surface roughness in cylinder bore is imparted by honing, which serves as the terminal process in cylinder bore manufacturing. The cylinder bore honing process consists of rough honing, fine honing, and …

Rinse Tank Salinity Automation, George Pahoundis

Williams Honors College, Honors Research Projects

Manufacturing processes are often consisted of many different processes and sub-processes. Each of these carries its own level of importance and impact to the overall picture. In this particular sub-process, salt is rinsed from a product via a rinse tank: a tank whose salinity may not exceed a certain level and whose temperature must not fall below a certain level. This setting is a prime opportunity to implement an automated control system to allow these parameters to be met with upmost efficiency. With potential savings in excess of $20,000 per year and an estimated payback period of 8 weeks, the …

Design Of Experiments Analysis Of Powder Removal Methods For Ebm Manufactured Ti-6al-4v Parts, Luis Cesar Ramos Castañeda

Open Access Theses & Dissertations

Additive Manufacturing is a technology that allows the on-demand manufacturing of complex geometries that cannot be fabricated through traditional subtractive manufacturing methods. Powder Bed Fusion is one of the seven categories of Additive Manufacturing with two subcategories, the Laser Beam Melting and the Electron Beam Melting. Freedom of design, rapid prototyping, and customization are some of the benefits that this technology provides. Like any technology, there are limitations for each category and subcategory. The Electron Beam Melting uses the electron beam to pre-heat the powder bed, reducing the temperature difference between the build part and powder bed, causing the surrounding …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Process Improvement And Lift Design For The Installation Of A Metrology Machine Assembly, Dalt J. Lasell, James Mitchell O'Meara, Matthew Steensma

Industrial and Manufacturing Engineering

The objective is to work with Onto Innovations, a leading provider of semiconductor metrology and manufacturing solutions, to develop a system that safely installs a 250lb optics plate into the Atlas III: one of their metrology machines. Based in Milpitas, CA, Onto Innovations utilizes a variety of operations to create different products and assembles each product on site. The 250lb optics plates are WIP that are transferred between fixtures and the Atlas III using a combination of lifts and human workers. The WIP have long lead times, high tolerances, and large costs associated with their manufacturing process.

Onto Innovations identified …

Automation Of Data Analysis In Formula 1, Adam Joseph Mourad, Prescott Jeanne Delzell, Patrick Conner Mccabe

Industrial and Manufacturing Engineering

This paper explores economic solutions for Formula 1 racing companies who are interested in data visualization tools. The research was conducted on the current development of data gathering, data visualization, and data interpretation in Formula 1 racing. It was found that a large chunk of racing companies within the league needs an affordable, effective, and automated visualization tool for data interpretation. As data collection in Formula 1 arises, the need for faster and more powerful software increases. Racing companies profit off-brand exposure and the more a racing team wins, the more exposure they receive. The goal of the paper focuses …

The Business Case For Industrial Safety: Revealing The Comprehensive Value Of Ergonomic Investments For Manufacturing Enterprises In Industry 4.0, Shane Stan

Honors Program: Senior Projects (Public)

How can today’s manufacturing enterprises construct, implement, and optimize modern safety initiatives in a manner that will present maximum return on investment and facilitate enterprise growth? Furthermore, how can these manufacturers assure individual ergonomic investments become part of a larger strategy to facilitate organizational change in safety? This work addresses these questions by placing industrial ergonomics in a business improvement context which comprehensively presents the financial returns and growth opportunities poised by modern safety initiatives. Additionally, to further strengthen the business case for industrial safety, an ergonomic action planning framework is established to guide the creation of holistic safety programs …

Design And Validation Of A Modular Instrument To Measure Torque And Energy Consumption In Industrial Operations, Mary De La Cruz, Ramiro Gonzalez, Jesus A. Gomez, Atilano Mendoza, Javier A. Ortega

Mechanical Engineering Faculty Publications

A modular torque measuring instrument capable of performing tapping torque tests (TTT) according to the ASTM D-5619 standard was designed, developed, and validated. With this new instrument, the performance of different lubricants can be evaluated in terms of frictional torque and energy consumption during tapping processes. This instrument can adapt onto any conventional milling machine or CNC machine and operate under various machining operations such as tapping, drilling, and other processes. To validate the design and performance of this new device, three commercially available lubricants were evaluated. From the three tested conditions, the results showed good repeatability, with consistent results …

Zinc Ferrite Based Gas Sensors: A Review, Kaidi Wu, Jianzhi Li, Chao Zhang

Manufacturing & Industrial Engineering Faculty Publications

Flammable, explosive and toxic gases, such as hydrogen, hydrogen sulfide and volatile organic compounds vapor, are major threats to the ecological environment safety and human health. Among the available technologies, gas sensing is a vital component, and has been widely studied in literature for early detection and warning. As a metal oxide semiconductor, zinc ferrite (ZnFe2O4) represents a kind of promising gas sensing material with a spinel structure, which also shows a fine gas sensing performance to reducing gases. Due to its great potentials and widespread applications, this article is intended to provide a review on the latest development in …

Cisco Nexus 9200 Robustness Redesign, Colin Berge, Ethan Gold, Cole Christopherson, Rahul Makhijani

Industrial and Manufacturing Engineering

Certain configurations of Cisco's Nexus 9200 product experienced issues with bending during shipping. Two solutions were developed to eliminate this problem: an external brace that could quickly address the problem yet was expensive and unsustainable, and a redesigned chassis, which was more economical but came with a longer time to implement. Real world packaging and shipping conditions were simulated in SolidWorks and Finite Element Analysis was used to model the stresses experienced when the product is dropped. Both designs were found to significantly reduce stress in critical areas, thus reducing the chance of failure and the cost of the problem. …

Redesign Of Cubesat For Beam Charging, Kuba Preis

Industrial and Manufacturing Engineering

This paper is intended to be a study in the applications of the design freedom granted by additive manufacture in the design of a 1U CubeSat frame. The main loads experienced by a CubeSat are structural (during launch) and thermal (solar radiation). Beam charging is an emerging technology which involves charging a CubeSat using a laser beam. In this paper, a CubeSat frame was redesigned to account for the structural loads induced during launch and the thermal loads induced when beam charging. The thermal, weight, design, and structural requirements for a new CubeSat design were derived. The 1U CubeSat frame …

Additive Manufacturing Powder Removal: Viper 2.0, Andrew D. Epperson, Sean Mccracken, Melissa O'Neil, Alex Ward

Mechanical Engineering

This report presents the final design review of this senior project team. The project is being sponsored by Lawrence Livermore National Laboratory, a federal design agency. Lawrence Livermore National Laboratory is interested in improving their metal additive manufacturing process. The goal of this senior project is to improve the efficiency and safety of a method currently being used to remove metal powders for additively manufactured components. A senior project team in 2017-2018 created the Vibration Induced Powder Evacuator and Reclaimer (VIPER), a device that uses a vibration motor to shake a printed part until it is clean from excess powder. …

Modeling Of Complex Parts For Industrial Waterjet Cleaning, Braden James

Graduate Theses and Dissertations

Industrial high-pressure waterjet cleaning is common to many industries. The modeling in this paper functions inside a collaborative robotic framework for high mix, low volume processes where human robot collaboration is beneficial. Automation of pressure washing is desirable for economic and ergonomic reasons. An automated cleaning system needs path simulation and analysis to give the operator insight into the predicted cleaning performance of the system. In this paper, ablation, the removal of a substrate coating by waterjet, is modeled for robotic cleaning operations. The model is designed to work with complex parts often found in spray cleaning operations, namely parts …

(Poster) Internal Restoration And Modernization Of A 1948 Wwii Era Jukebox, Miles Furr, Cristiana Olarinre, Joel Carpenter, Elijah Knox, George Ricco, Paul Talaga, Suranga Dharmarathne

ASEE IL-IN Section Conference

Using Six Sigma guidelines under the sponsorship of The University of Indianapolis in cooperation with the client, Brugh Industrial Engineering, this project is to modernize the functionality and interface of a Rockola Model 1428 Jukebox while maintaining its vintage appeal. The process of modernization includes meeting today's industrial safety standards, incorporating ethernet protocol, and utilizing a programmable logic controller, PLC. The jukebox is a showcase of current automation technology. Lighting has been upgraded from fluorescent and incandescent bulbs to addressable nano pixel LEDs. The amplifier, coin system, and record selection system were revitalized to OEM operation standards. All switches within …

Fracture Toughness And Fatigue Crack Growth Rate Characterization Of Inconel 718 Formed By Laser Powder Bed Fusion, Charles C. Hohnbaum

Theses and Dissertations

Continuing improvement in the field of AM of metals provides the opportunity for direct fabrication of aerospace parts. AM was once used in large part for rapid prototyping but improvements in technology and increases in the knowledge base of AM materials has provided the opportunity for manufacture of AM parts for operational use. The ability to create low numbers of unique parts without having to invest in expensive tooling provides great economic incentive to utilize this technique. IN718 is the most common high temperature alloy used in the aerospace industry and lends itself readily to formation by LPBF. The superior …

Application Of Artificial Neural Networks To Assess Student Happiness, Gokhan Egilmez, Nadiye O. Erdil, Omid Mohammadi Arani, Mana Vahid

Mechanical and Industrial Engineering Faculty Publications

The purpose of this study is to develop an analytical assessment approach to identify the main factors that affect graduate students' happiness level. The two methods, multiple linear regression (MLR) and artificial neural networks (ANN), were employed for analytical modelling. A sample of 118 students at a small non-profit private university constituted the survey pool. Various factors including education, school facilities, health, social activities, and family were taken into consideration as a result of literature review in happiness assessment. A total of 32 inputs and one output variables were identified during survey design phase. The following survey conduction, data collection, …

An Analysis Of Resistance Spot Weld Quality Based On Acoustic And Electrical Signatures, Ivan Charles Butler

Theses and Dissertations--Manufacturing Systems Engineering

The union of a set of materials by way of Resistance Spot Welding is designed so that once fused together, a substantial amount of intentional, external force must be applied to separate the contents. Therefore, Resistance Spot Welding is often the preferred fusion method in high-volume manufacturing processes. The result of Resistance Spot Welding however is the formation of a weld nugget which is not visible to the naked eye. Destructive and/or ultrasonic methods applied off-line must be used to determine the quality of each weld; both inefficient and expensive processes. The following research analyzes the data fed back during …

Implementation And Analysis Of True Lean In A Startup Company By Using Pdca Model, A Case Study In A Manufacturing Venture, Ankit Jangid

Theses and Dissertations--Manufacturing Systems Engineering

The purpose of this research is to implement and analyze the true lean transformation in a manufacturing start-up organization. Often, lean transformations are observed in developed manufacturing organizations having sophisticated production lines and numerous employees, where lean tools are utilized to reduce waste while increasing profit. However, this type of transformation is narrowly focused on quantifiable process results and falls short of the ultimate goal, establishing a true lean culture within the organization. As a result, it is recommended that true lean principles, philosophies, culture, operations environment and tools be applied at the very beginning stages of an organization, or …

Investigation Of Chip-Form And Tool-Wear In Turning Of Hardened Af9628 Alloy Under Various Cooling And Lubrication Conditions, Jason Wolf

Theses and Dissertations--Manufacturing Systems Engineering

Next generation defense and commercial applications for structural steels require new alloys that eliminate or reduce critical elements from their composition to lower cost and improve manufacturability, while maintaining or exceeding high strength and toughness requirements. A new alloy, denoted as AF9628, has recently been developed for this purpose and its manufacturing characteristics and the material response in component manufacturing must be fully understood.

In the present study, hardened AF9628 alloy was turned with a coated carbide cutting tool under fixed cutting speed, feed rate, and depth of cut parameters. This work focuses on chip-form and tool-wear analysis to understand, …