Industrial Engineering Commons^™

Spatial Markov Equilibrium Models For Taxi Services: Driver Decision, Search Friction, And Locational Pricing, Yanchao Liu

Industrial and Systems Engineering Faculty Research Publications

This paper develops a modeling framework for stochastic multi-agent systems and applies it to equilibrium and pricing analysis in urban taxi markets. Travel demand is represented as a trip network and embedded in a Markov chain that captures both locational and in transit taxi states, with transition dynamics reflecting trip durations, search frictions, spatial competition, and drivers’ perceptions of long-term value. The framework features a parametric Markov chain with endogenous transition probabilities and a behavioral model in which agents’ decisions depend on anticipated long-term rewards. We establish equilibrium existence and examine two locational pricing schemes that align individual incentives with …

Can Generative Ai Make Farming Decisions? Current Status And Future Pathways: A Case Study In Row Crop Production With Chatgpt, Nipuna Chamara, Yufeng Ge, Joe Luck, Yu Pan, Saleh Taghvaeian, Cory Walters, Christopher Proctor, Daran Rudnick, Daren Redfearn

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The agricultural decision-making process is experience-based, knowledge-dependent, time-sensitive, complex, and driven by historical data. Planting, fertilization, irrigation, and chemigation are key categories in farm decision-making, and currently there is no one-shot decision-support tool that covers all these activities. Generative Artificial Intelligence (AI) models are more advanced than traditional machine learning and deep learning models. These models have been trained on vast amounts of data from the internet, allowing them to accept unstructured data in various forms and generate human-like text, solutions to problems, and scenario predictions. Given this capability, we became interested in exploring the potential of generative AI in …

Optimization Of Vehicle Mix For Three-And Four-Wheel Passenger Transportation System In Nigeria, Omotunde A. Muyiwa, Hamid A. Jimoh, Kolawole T. Oriolowo

Tanzania Journal of Engineering and Technology (TJET)

Efficient transportation systems are essential for reducing passengers waiting times in densely populated areas. However, there is a dearth of information on the optimization of vehicle mix for three-and four-wheel transportation systems in Nigeria. The present study was designed to optimize the vehicle mix for three-and four-wheel passenger transportation to improve transportation efficiency. Twenty purposively selected vehicles were observed, while a queuing model (M/M/s) was used to determine passenger arrival rates during different periods (morning, afternoon, and evening). An integer linear programming model was developed to minimize passenger waiting times. Data on vehicle types, capacities, travel cycles, and average passenger …

Performance, Economic And Environmental Evaluation Of A Solar-Assisted Vacuum Deaeration Heating System., Liew Shan Kun

Student Works (2020-2029)

This research evaluates the performance of a solar-assisted heating (SAH) system for makeup water in a vacuum deaeration process. The system integrates solar energy into the heating process, with parametric analysis conducted across varying configuration of total solar radiation and water flow rates. The total solar radiation at the experimental site in Kuala Kangsar, Perak, Malaysia, characterized by tropical weather, fell within the range between 414W/m2 to 568W/m2. Performance analysis showed that a flow rate of 0.4 LPM achieved the target temperature of 61°C required for the deaeration process. Thermal efficiency peaked at 62.60% under a solar radiation of 900 …

Optimal Placement Of Electric Vehicle Chargers: A Mixed-Integer Linear Programming Model, Joubin Zahiri Khameneh, Emmanuel Fagbenle

Faculty Publications

Electric vehicle adoption is growing, but New Hampshire lags in public charging infrastructure, especially in rural areas. This gap increases range anxiety and economic inefficiencies. In this study, we developed a mixed-integer linear programming (MILP) model to optimally locate new electric vehicle chargers statewide, maximizing coverage and equity under budget constraints. The model includes geographic coverage requirements, population-weighted equity, capacity limits, and a $28 million budget. Moreover, the model recommends 855 Level 2 chargers and 149 Direct Current Fast Chargers (DCFCs) across 247 ZIP Codes, nearly doubling public charging capacity and achieving 98.8% coverage within defined service radii. The plan …

Direct Ink Writing Of Shear Exfoliated Two-Dimensional Nanomaterial- Elastomeric Multifunctional Nanocomposite, Md Abdur Rahman Bin Abdus Salam, Asif Hasan Ridoy, A K M Abirul Haque, Muhammad Shahbaz Rafique, Md Arafat Hossain, Md Shahriar Forhad, Matthew G. Boebinger, Farid Ahmed, Karen Lozano, Ali Ashraf

Manufacturing & Industrial Engineering Faculty Publications

Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman …

Anaerobic Digestion Of Food Waste Components: Modeling Biogas Production, Opeyemi E. Adelegan

Civil Engineering Dissertations

Food waste constitutes the single largest component of municipal solid waste landfilled in the United States — approximately 22% of 292.4 million tons generated in 2018 — and its anaerobic decomposition releases methane, a greenhouse gas with global warming potential approximately 27–30 times that of carbon dioxide over a 100-year horizon (IPCC, 2021). Anaerobic digestion (AD) offers an alternative management pathway that recovers energy and produces nutrient-rich digestate, but AD performance varies by as much as five-fold across food waste streams (130–630 m³ CH₄ per Mg VS added), and existing predictive tools either treat food waste as a …

From Test Tracks To Carbon Tracks: Evaluating The Carbon Emissions Of Autonomous Vehicle Development, Sarah Deniz

The Journal of Purdue Undergraduate Research

Autonomous vehicle (AV) development has seen a sharp increase in the past 10 years, and there is a significant energy cost of training AVs to meet safety regulations. The training process includes virtual simulation training as well as physical training on public roads and within private testing facilities. The high energy expenditure associated with AV training has a respective environmental cost that can be quantified as a lifetime “carbon debt” of released carbon emissions. The environmental sustainability of AVs has not been thoroughly studied in currently available literature, and this paper showcases a model that quantifies the total “carbon debt” …

Advancing Life Cycle Assessment For Environmental Sustainability Of Carbon Fiber-Reinforced Polymer Composites (Cfrps)), Hao Chen

All Dissertations

Carbon fiber-reinforced polymer composites (CFRPs) have emerged as promising materials, particularly for lightweight applications, with the potential to reduce environmental impacts across multiple sectors, including automotive, aerospace, and renewable energy. However, fully realizing their sustainability potential requires a more comprehensive and context-specific understanding of their environmental performance throughout the entire life cycle—from raw material production to end-of-life management.

This dissertation advances life cycle assessment (LCA) practices for CFRPs by addressing key challenges across multiple phases of the CFRP life cycle. First, I conducted a critical review and meta-analysis of carbon fiber manufacturing, revealing substantial variability in reported data on energy …

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

Carbon Accountability Scores: A Process-Oriented Approach For Carbon Offsetting Using Ai Agents, Joshit Mohanty, Vaishali Vaishali

Graduate Student Government Association Research Conference

Conventional carbon offset programs rely on quantified emissions to determine balancing requirements. While this approach offers a standardized means of measuring carbon output, it often provides industries with a loophole—allowing them to offset their emissions by purchasing equivalent credits for activities such as tree planting rather than tackling inefficiencies at the source. This research proposes a process-based framework called Carbon Accountability Scores (CA scores) to offer a proactive strategy for assessing and reducing carbon footprints. Instead of focusing on the mere balancing of emitted and sequestered carbon, CA scores integrate an organization’s operational processes into the calculation, thereby offering the …

A Design And Analysis Of Computer Experiments Approach To Water Distribution Network Seismic Rehabilitation Optimization, Uthman Abiola Kareem

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Water is an essential part of human life. However, there are critical infrastructures that enable water availability in communities and homes. One of such is a water distribution network. Water distribution network performance depends on its reliability, which could be threatened by external agents like earthquakes. When earthquakes occur, they cause damages on some pipes within the distribution network and this limits performance of water distribution network. While earthquakes cannot be prevented, effective maintenance intervention may reduce the impact of earthquakes on water distribution networks. In order to develop an effective maintenance plan, researchers approach it in different ways. However, …

Pla Polymer Binder In Core Production - Influence On Final Casting Dimensions, Artur Soroczyński, Krzysztof Rechowicz

Virginia Digital Maritime Center (VDMC) Faculty Publications

The foundry industry is seeking an ecological alternative to synthetic molding resins. This study evaluates the technological properties of core sands bonded with biodegradable polylactide (PLA). Cores prepared on a 2% quartz sand matrix were subjected to casting processes using two alloys with extremely different pouring temperatures: gray cast iron (approx. 1200 °C) and AK11 silumin (approx. 710 °C). The research methodology included macroscopic assessment, dimensional analysis using 3D scanning (GOM Inspect), and qualitative knock-out assessment supported by numerical temperature field simulation. The results showed that the high crystallization temperature of cast iron leads to complete thermal degradation of the …

Lean Manufacturing Practices In Tanzania: Exploring Awareness, Training And Capital Investment, Francis D. Sinkamba

Tanzania Journal of Engineering and Technology (TJET)

With the growing competition among industries in the world, manufacturing industries are now forced to adopt the Lean Manufacturing philosophy to improve their competitive abilities. The adoption of the philosophy is very low in developing countries such as Tanzania, as is demonstrated with 1% of publications and the lack of knowledge and capital for Lean Manufacturing implementation causes this. Furthermore, the contribution of the sector to the Gross Domestic Product in Tanzania is low and stands at 8.4%. The study wants to bridge the gap in training, capital and awareness of Lean Manufacturing in Tanzania. Survey and purposive sampling techniques …

Quantifying Lock Criticality For Inland Waterway Navigation Using An Agent-Based Simulation, Ashwin Narayan

Industrial Engineering Undergraduate Honors Theses

Inland waterway travel has tremendous potential to improve multimodal transportation in the United States due to its environment-friendly and safe nature. Waterway travel has proven to be much cheaper per ton-mile and more fuel efficient than trucks. Millions of dollars have recently been invested in inland waterway networks to facilitate travel. The waterway infrastructure must be resilient to enable efficient waterway travel and prevent unnecessary delays. Locks, an important component of waterway infrastructure, enable vessels to travel between waterways of varying depths and must be maintained consistently to avoid unexpected failures. However, with limited resources, it is difficult to preserve …

An Emergency Response System To Assist The Movement Of Vehicles During Emergency Operations In Urban Transportation Networks, Jamal Nahofti Kohneh

All Dissertations

Emergency responders need to arrive at the emergency scene as soon as possible, but operating vehicles under emergency conditions can pose a risk to both the responders and other road users, potentially resulting in crashes or delays in emergency operations. In this research, an emergency response system is proposed to assist emergency and non-emergency response vehicles (ERVs and non-ERVs) during emergency operations in a connected vehicle environment. This system collects the information from connected ERVs and non-ERVs, utilizes this information as inputs in the proposed models, and sends instruction messages back to vehicles. The proposed models provide the fastest ERV …

Analysis Of Cost And Time Efficiency In Container Distribution Between Container Truck And Freight Train From Industrial Area To Port, Indah Imayanti, Sutanto Soehodho, Nahry Yusuf

Smart City

Jakarta International Container Terminal (JICT) in Tanjung Priok Port , which serves export and import containers, can serve up to 5500 TEUs daily. However, no more than 1% of the total containers are transported by freight trains, meaning that 99% of container distribution from industrial areas is carried by trailer trucks. This condition causes a long queue at the container terminal entrance, resulting in delays in the services as well. Currently, Tanjung Priok Port is connected to rail transportation from Cikarang dry port with the frequency of twice a day with 30 flatcars (FC) for each trip. The capacity of …

A Dedicated Lane Analysis For Supply Chain Resilience In The U.S.-Mexico Border: Cost-Comparison And Simulation Models, Carlo A. Zorola Gonzalez

Theses and Dissertations

Supply chains have been actively developing and implementing strategies to enhance resilience in response to various disruptive events like the COVID-19 pandemic, hurricanes, geopolitical tensions, and climate change. These strategies aim to address demand and supply imbalances, logistical challenges, and policy restrictions encountered in transborder commerce. One area significantly impacted by such disruptions is cross-border trade between the US and Mexico. Understanding these strategies is crucial for achieving supply chain resilience, defined as the ability of a supply chain to quickly adapt to sudden disruptions without affecting the flow of goods. In both the US-Mexico and US-Canada borders …

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

Modeling Of Amine-Based Co2 Capture Process, Zafar Safarovich Turakulov

Chemical Technology, Control and Management

A significant factor influencing climate change is the release of carbon dioxide (CO₂) into the atmosphere as a consequence of human activities such as the combustion of fossil fuels. Climate change can be slowed down by taking action to mitigate industrial-scale CO₂ emissions. Currently, the most advanced technology for capturing CO₂ from industrial flue gases is the post-combustion CO₂ capture based on amine absorption. However, due to the high energy penalties of existing CO₂ capture technologies and insufficient carbon markets, it is necessary to develop methods that compete with these technologies or minimize their …

Assessments Of The Application Of Earned Value Management System For Construction Project Performance Measurement In Zanzibar, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

Many construction projects in developing countries including in Zanzibar suffer from time and budget overruns. The Revolution Government of Zanzibar established different bodies such as Zanzibar Contractors Registration Board (ZCRB), Zanzibar Architects, Engineers and Quantity Surveyors Registration Board (ZAEQRB), Zanzibar Public Procurement and Disposal of Public Asset Authority (ZPPDA), among others with the aim of controlling the performance of project. Often scope creep, time and cost overruns are very common problems in construction projects. This study aims at addressing those problems by assessing the use of Earned Value Management (EVM) methodology in measuring construction industry performance in Zanzibar. The study …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

Experimental Investigation Of The Self-Healing Potential Of Bacteria For Sustainable Concrete Structures, Pitiporn Asvapathanagul, Simone Galano, Andrea Calabrese, Mehran Rahmani, Maggie Ly, Daniela Flores, Michael Hernandez, Nicholas Banuelos

Mineta Transportation Institute

Although concrete is the most widely used building material in the world, its limited tensile strength makes cracking a common phenomenon in concrete elements. This study investigates the potential of autonomous self-healing as an eco-friendly and lowcost method to increase the durability of concrete. The crack-healing potential of different types of high-alkaline-tolerant bacteria or calcite-precipitation microorganisms is investigated. High-alkaline-tolerant bacteria and calcite-precipitation microorganisms were used to retrofit lab-fractured concrete samples. The samples healed with each of these bacteria groups were cast and tested under compressive load up to failure to measure the compressive strength of the concrete samples. The outcomes …

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Studying Pedestrian’S Unmarked Midblock Crossing Behavior On A Multilane Road When Interacting With Autonomous Vehicles Using Virtual Reality, Fengjiao Zou

All Dissertations

This dissertation focuses on the challenge of pedestrian interaction with autonomous vehicles (AVs) at unmarked midblock locations where the right-of-way is unspecified. A virtual reality (VR) simulation was developed to replicate an urban unmarked midblock environment where pedestrians cross a four-lane arterial roadway and interact with AVs. One research goal is to investigate the impact of roadway centerline features (undivided, two-way left-turn lane, and median) and AV operational schemes portrayed through on-vehicle signals (no signal, yellow negotiating indication, and yellow/blue negotiating/no-yield indications) on pedestrian crossing behavior. Results demonstrate that both roadway centerline design features and AV operations and signaling show …

Exploring Current And Future Research Trends On Safety Climate In Construction Projects, Kamugisha Joseph Kajumulo

Tanzania Journal of Engineering and Technology (TJET)

Clients, consultants, and contractors in the construction industry can benefit from a safety climate by obtaining knowledge of attitudes and perceptions for better safety outcomes. However, the current and future research trends for safety climate in construction projects have not yet been fully examined. In order to solve this problem, a systematic review of previous research findings using a social network approach must be conducted, and future trends for the safety climate in building projects must be identified. Sixty-three peer reviewed articles were gathered to study the literature on safety climate in construction projects. A social network approach was employed …

Current And Future Trends Of Construction Project Performance Models: A Review, Method Mtana

Tanzania Journal of Engineering and Technology (TJET)

The construction industry (CI) has experienced outstanding growth and contributed to economic growth for many countries, with enormous foreign investments that require quality projects. High pressure to reduce the construction cost and time commonly put the industry at risk of lower quality and safety of the construction facilities. Like many other developing countries, Tanzania needs more stringent quality control measures in the construction sector to contribute positively to sustainable growth. This study thus reviews current and future trends in construction industry performance in Tanzania. The literature review on construction projects (CPs) performance is based on information on time overruns from …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …

Simulating Energy Performance Of Buildings: A Study Using Equest And Energy Star® Portfolio Manager, Sabin Wagle

Graduate Theses, Dissertations, and Problem Reports (ETD)

The urgent need for improving building energy efficiency in response to global warming and environmental sustainability has highlighted the importance of practical techniques to optimize energy performance. The study utilizes the eQUEST simulation engine and Energy Star® Portfolio Manager to evaluate retrofit and design parameters and conduct a sensitivity analysis to explore the impact of different parameters on building energy performance. The study develops building energy models in eQUEST using data from two fully operational Distribution centers. It is calibrated using the Normalized Mean Bias Error (NMBE) and Coefficient of Variation of Root Mean Square Error (CV(RMSE)) method, meeting the …