Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Performance (4)
- Economic model predictive control (3)
- Efficiency (3)
- Public works (3)
- Technical audit (3)
-
- Catalyst preparation (2)
- Cellulose (2)
- Design (2)
- Future development (2)
- Impact (2)
- Industrial application (2)
- Nonlinear model identification (2)
- Optimization (2)
- Process control (2)
- Process optimization (2)
- Recycling (2)
- Regression (2)
- Sustainability (2)
- Sustainable development (2)
- "slope - area" method (1)
- "speed - area" method (1)
- 0000-0002-7517-4537 (1)
- 1-Butyl-3-methylimidazolium chloride. (1)
- AMD (1)
- ANTI VIRUSES (1)
- Absorption (1)
- Activated Carbon (1)
- Adaptation (1)
- Additive manufacturing (1)
- Adhesive Dispensing (1)
- Publication Year
- Publication
-
- Tanzania Journal of Engineering and Technology (TJET) (73)
- Chemical Technology, Control and Management (5)
- Chemical Engineering and Materials Science Faculty Research Publications (3)
- Academic Leadership Academy (1)
- Department of Chemical and Biomolecular Engineering: Faculty Publications (1)
-
- Electrical & Computer Engineering Faculty Publications (1)
- Electrical Engineering Undergraduate Honors Theses (1)
- Electronic Theses & Dissertations (2024 - present) (1)
- Graduate Dissertations and Theses (1)
- Journal of Applied Packaging Research (1)
- Journal of Humanities and Social Sciences (1)
- Journal of Materials Exploration and Findings (1)
- KGI Theses and Dissertations (1)
- Makara Journal of Science (1)
- Mechanical & Aerospace Engineering Theses & Dissertations (1)
- Open Access Theses (1)
- Virginia Digital Maritime Center (VDMC) Faculty Publications (1)
- Publication Type
Articles 31 - 60 of 95
Full-Text Articles in Industrial Engineering
Ambient Air Emission Profiles Of Polycyclic Aromatic Hydrocarbons Around A Typical University Power House In Nigeria, Oyetunji Okedere
Ambient Air Emission Profiles Of Polycyclic Aromatic Hydrocarbons Around A Typical University Power House In Nigeria, Oyetunji Okedere
Tanzania Journal of Engineering and Technology (TJET)
The level of electricity generation in Nigeria is presently grossly inadequate. Consequently, the productive sectors of the economy do not presently enjoy an uninterrupted supply of electrical energy from the country’s national grid and the downtime is in most cases too much. Using diesel-fueled electric power generators has become an attractive alternative to meet the shortfall in the energy supply gap. In this study, the levels of polycyclic aromatic hydrocarbons in the vicinity of the diesel-fueled electric power generators operated by Osun State University, Osogbo, Nigeria were investigated with a view to ascertain the priority levels and carcinogenic PAHs. Since …
Employment Of Intelligent Predictive Maintenance On Thermal Power Plant Component Parts Taking Condenser Vacuum As A Case Study, Titus Ajewole
Employment Of Intelligent Predictive Maintenance On Thermal Power Plant Component Parts Taking Condenser Vacuum As A Case Study, Titus Ajewole
Tanzania Journal of Engineering and Technology (TJET)
This work proposes deployment of machine learning in the maintenance of individual constituent parts of steam power plant assemblages. With the condenser vacuum of a steam turbine (in a six-turbine plant assemblage) taken as a case study, information on the past operating parameters of the selected plant component was used to forecast its future working condition. Based on Exponential Gaussian Process of Regression, a model was developed, trained using the diachronic operational data, and employed in determining the future. A quantitative evaluation was employed to provide the distribution of the test values of the data about the lines of regression, …
Designing A Cylindrical Capacitive Based Sensor For Monitoring The Table Salt’S Moisture Content During Iodization, Mwajuma Lungo
Designing A Cylindrical Capacitive Based Sensor For Monitoring The Table Salt’S Moisture Content During Iodization, Mwajuma Lungo
Tanzania Journal of Engineering and Technology (TJET)
Coaxial cylinder capacitive moisture sensor for determination of moisture content of table salts has been fabricated. The CMS method for determination of moisture content of table salts overcomes the effect of evaporation of iodine in table salt which results from heating in the oven drying method. The CMS overcomes the polarization effect result from the resistive methods of moisture content determination and it is non expensive to construct and it has high accuracy since measurements involves programming system in interpretation of the results. In this research, moisture content sensor based on capacitive principal created using two coaxial cylinders with height …
Product Costing And Pricing In Small And Medium Enterprises In Tanzania, Cosmas F Kindole
Product Costing And Pricing In Small And Medium Enterprises In Tanzania, Cosmas F Kindole
Tanzania Journal of Engineering and Technology (TJET)
metalwork small and medium enterprises located in Dar es Salaam with the aim of establishing methods used by SMEs in Tanzania in setting selling prices of their products. The study was necessitated by the apparent discrepancy of prices for similar products from SMEs. The approach used to gather information was mainly through direct interview and the use of questionnaires. Direct observation and literature review were also used to establish the whole costing and pricing practices in metal manufacturing SMEs. The findings of the study established that product selling practices of the surveyed SMEs were based on instinct and appearance of …
Assessments Of The Application Of Earned Value Management System For Construction Project Performance Measurement In Zanzibar, Juma M. Matindana
Assessments Of The Application Of Earned Value Management System For Construction Project Performance Measurement In Zanzibar, Juma M. Matindana
Tanzania Journal of Engineering and Technology (TJET)
Many construction projects in developing countries including in Zanzibar suffer from time and budget overruns. The Revolution Government of Zanzibar established different bodies such as Zanzibar Contractors Registration Board (ZCRB), Zanzibar Architects, Engineers and Quantity Surveyors Registration Board (ZAEQRB), Zanzibar Public Procurement and Disposal of Public Asset Authority (ZPPDA), among others with the aim of controlling the performance of project. Often scope creep, time and cost overruns are very common problems in construction projects. This study aims at addressing those problems by assessing the use of Earned Value Management (EVM) methodology in measuring construction industry performance in Zanzibar. The study …
Review On Modifications Of Sisal Fibers For Textile Applications, Liberato V Haule
Review On Modifications Of Sisal Fibers For Textile Applications, Liberato V Haule
Tanzania Journal of Engineering and Technology (TJET)
Properties of sisal fibers such as high coarseness and poor drapability made the fibers less suitable in production of conventional textiles compared to synthetic fibers. The environmental consciousness and depletion of petrochemical resources have attracted researchers on investigating the use of natural fibers in the industrial production of conventional textiles. Sisal is among highly researched natural fibers due to its features such as strength, recyclability, availability, low processing cost, light weight and ease process ability. This paper reviews possible modifications of sisal fibers to enhance performance in conventional textiles applications
Exploring Current And Future Research Trends On Safety Climate In Construction Projects, Kamugisha Joseph Kajumulo
Exploring Current And Future Research Trends On Safety Climate In Construction Projects, Kamugisha Joseph Kajumulo
Tanzania Journal of Engineering and Technology (TJET)
Clients, consultants, and contractors in the construction industry can benefit from a safety climate by obtaining knowledge of attitudes and perceptions for better safety outcomes. However, the current and future research trends for safety climate in construction projects have not yet been fully examined. In order to solve this problem, a systematic review of previous research findings using a social network approach must be conducted, and future trends for the safety climate in building projects must be identified. Sixty-three peer reviewed articles were gathered to study the literature on safety climate in construction projects. A social network approach was employed …
The Fourth Industrial Revolution: Opportunities And Challenges To The Future Of Mechanical Engineering, Ulingeta O.L. Mbamba
The Fourth Industrial Revolution: Opportunities And Challenges To The Future Of Mechanical Engineering, Ulingeta O.L. Mbamba
Tanzania Journal of Engineering and Technology (TJET)
This paper provides a conceptual overview of the developments of the Fourth Industrial Revolution (4IR) and derives challenges and opportunities for the future of the mechanical engineering profession. The paper broadly defines 4IR as the fusion of technologies and interaction across physical, digital and biological aspects, while defining mechanical engineering as "a multi-faceted discipline that encompasses the teaching, practice and guidance of others in the development and application of scientific principles to mechanical systems". The paper looks specifically at developments in the Internet of Things (IoT), blockchain technology, robotics, Big Data analytics, biotechnology, nanotechnology, 3D printing and artificial intelligence and …
Towards Lean Manufacturing In Developing Countries: Research Gaps And Directions In Tanzania, Francis D. Sinkamba
Towards Lean Manufacturing In Developing Countries: Research Gaps And Directions In Tanzania, Francis D. Sinkamba
Tanzania Journal of Engineering and Technology (TJET)
In the current knowledge-driven economy, many industries across the globe are forced to adopt manufacturing technologies such as lean manufacturing to remain competitive in the globalized world. Despite the increase in lean manufacturing implementations, the adoption rate in Tanzania is very low and estimated to be 8 percent. Likewise, the sustainability of lean manufacturing tools and practices is still questionable, which shows the need to develop lean maturity models. To date, several lean maturity models have been developed but there is ARTICLE INFO Submitted: July 5, 2022 Revised: Sept. 28, 2022 Presented: Oct. 20, 2022 a lack of maturity models …
Factors Influencing Total Productive Maintenance Implementation For Thermal Generation Plants, Ismail W. R. Taifa Dr
Factors Influencing Total Productive Maintenance Implementation For Thermal Generation Plants, Ismail W. R. Taifa Dr
Tanzania Journal of Engineering and Technology (TJET)
This study accepts that the technical and administrative factors can amplify effective total productive maintenance (TPM) implementation at thermal generation plants. It is noted that there is a limited number of studies that have attempted to understand the subject of TPM implementation in the energy sector. Noting this shortcoming, the authors thought it crucial to generate empirical evidence on the factors influencing effective TPM implementation for thermal generation plants, with evidence from gas-fired plants. A sample of 88 respondents was selected and consulted. Data were collected through questionnaires and analyzed quantitatively by inferential statistics and qualitatively through thematic analysis using …
Current And Future Trends Of Construction Project Performance Models: A Review, Method Mtana
Current And Future Trends Of Construction Project Performance Models: A Review, Method Mtana
Tanzania Journal of Engineering and Technology (TJET)
The construction industry (CI) has experienced outstanding growth and contributed to economic growth for many countries, with enormous foreign investments that require quality projects. High pressure to reduce the construction cost and time commonly put the industry at risk of lower quality and safety of the construction facilities. Like many other developing countries, Tanzania needs more stringent quality control measures in the construction sector to contribute positively to sustainable growth. This study thus reviews current and future trends in construction industry performance in Tanzania. The literature review on construction projects (CPs) performance is based on information on time overruns from …
Towards The Development Of A Framework For Assessing Organizational Governance Maturity For Technical Audit Of Public Works, George Haule
Towards The Development Of A Framework For Assessing Organizational Governance Maturity For Technical Audit Of Public Works, George Haule
Tanzania Journal of Engineering and Technology (TJET)
The quality of the audit work and its products is often associated with the organizational maturity of the audit function. The absence of a well-defined organizational maturity for an audit function leads to poor quality of audit work or products and ineffective audit function. The lack of a framework for measuring governance maturity was identified as a major deterrent factor to the attainment of quality audit work. Measuring the governance maturity of the technical audit of public works is challenging due to the absence of a maturity framework that fits its needs. The noted shortcomings include: (a) existing maturity frameworks …
Designing And Manufacturing Of Vegetable Slicing Machine, Juma Nuhu Msuya
Designing And Manufacturing Of Vegetable Slicing Machine, Juma Nuhu Msuya
Tanzania Journal of Engineering and Technology (TJET)
Agro-processing industry is faced with a challenge of slicing of vegetables for immediate consumption. This stems from the fact that the traditional slicing methods use bare hands, and knives. This method is faced with shortcomings of inefficiency, poor hygiene, and significant dangers to injury. If vegetables are not sliced, their drying takes longer, may possibly be spoiled, and cannot be stored for future uses. Therefore, this paper strives to design a vegetable slicing machine to increase the efficiency of the drying process as a post-processing step. The study employed a Pugh’s design model to design the machine and manufacture it. …
Structural Model Of The Technological Process Of Storage And Processing Of Oil Raw Materials, N.A Kabulov
Structural Model Of The Technological Process Of Storage And Processing Of Oil Raw Materials, N.A Kabulov
Chemical Technology, Control and Management
The technological method of storing and processing oilseed raw materials is structurally modelled in the article. Additionally, it is suggested that the generalized structure be presented as a three-part scheme, consisting of a raw material department, a processing shop, and transportation networks. On the basis of a thorough examination of the characteristics of the constituent parts of the technological complex, a practical model for the problem of the general characteristics of the technological complex is proposed.
Performance Evaluation Of Udsm Network To Deliver Multimedia Elearning Contents: Case Of Coict, Mercy Mbise
Performance Evaluation Of Udsm Network To Deliver Multimedia Elearning Contents: Case Of Coict, Mercy Mbise
Tanzania Journal of Engineering and Technology (TJET)
The use of technology in education in Sub-Saharan Africa has been reported to be hindered by many factors including inadequate Information and Communication Technology (ICT) infrastructure, low internet speed, and lack of skills to use educational technologies. This paper aim at evaluating how the available ICT infrastructure at the College of Information and Communication Technologies (CoICT) can support, with acceptable Quality of Service (QoS), the delivery of multimedia applications for eLearning services. The evaluation was performed over a network testbed implemented in a computer laboratory for wired and wireless connections. The testbed consisted of five personal computers (PCs) connected via …
Effect Of Temperature, Catalyst Concentration And Time, On Polylactic Acid Production From Sisal Boles Juice By Ring Open Polymerization, Neema O. Msuya
Effect Of Temperature, Catalyst Concentration And Time, On Polylactic Acid Production From Sisal Boles Juice By Ring Open Polymerization, Neema O. Msuya
Tanzania Journal of Engineering and Technology (TJET)
Polylactic acid (PLA) is a biodegradable and renewable alternative to non-biodegradable petrochemical-based polymers that is environmentally friendly and green. PLA can be made from a variety of agricultural wastes that contain sugars, such as sisal boles. This study aimed at analysing the possibility of producing PLA from lactic acid (LA) produced from sisal bole. A 2n factorial design was used to analyse the effects of temperature (160-180ºC), time (1-2 hrs) and tin octoate catalyst concentration (0.025-0.05%) on the PLA yield during polymerization. Minitab Version 20.2.0 was used to design the experiment and analyse the effects on the responses through ANOVA. …
Efficient Removal Of Lead Ions From Aqueous Media Using Sustainable Sources On Marine Algae, Hannah Namkoong, Erik Biehler, Gon Namkoong, Tarek M. Abdel-Fattah
Efficient Removal Of Lead Ions From Aqueous Media Using Sustainable Sources On Marine Algae, Hannah Namkoong, Erik Biehler, Gon Namkoong, Tarek M. Abdel-Fattah
Electrical & Computer Engineering Faculty Publications
The goal of this project is to explore a new method to efficiently remove Pb(II) ions from water by processing Undaria pinnatifida into immobilized beads using sodium alginate and calcium chloride. The resulting biosorbent was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS). Using immobilized U. pinnatifida, we investigated the effect of various factors on Pb(II) ion removal efficiency such as temperature, pH, ionic strength, time, and underlying biosorption mechanisms. For Pb(II) ion biosorption studies, Pb(II) ion biosorption data were obtained and analyzed using Langmuir and Freundlich adsorption models. It …
Virtual Analyzers For Increasing The Intelligence Of Industrial Process Control Systems, Umidjon Abdimajotovich Ruziev Phd, Marufjon Kobuljanovich Shodiev
Virtual Analyzers For Increasing The Intelligence Of Industrial Process Control Systems, Umidjon Abdimajotovich Ruziev Phd, Marufjon Kobuljanovich Shodiev
Chemical Technology, Control and Management
It is shown that the development and implementation of virtual analyzers of the quality of the final industrial products is an effective tool for increasing the efficiency of industrial production. The methodology and stages of development of virtual analyzers for predicting the quality of products, monitoring non-measurable or difficult-to-measure parameters of continuous and periodic technological processes are considered, and issues of supporting and adapting a virtual analyzer during its operation without restructuring are also considered.
Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd
Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd
Journal of Applied Packaging Research
In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …
Rheological Properties Of Aged Crude Hard Wood Pyrolysis Oil, Divina D. Kaombe
Rheological Properties Of Aged Crude Hard Wood Pyrolysis Oil, Divina D. Kaombe
Tanzania Journal of Engineering and Technology (TJET)
Upon storage of the pyrolysis oil, aging reactions may initiate phase separation and change of the rheological properties. These changes lead to unfavourable fuel characteristics in handling, transportation and applications. Efforts have been made for alleviation including methods on how to avoid these aging effects and development of equipment capable of handling aged pyrolysis liquids with unfavourable fuel characteristics. Therefore, the aim of this study was to explore the rheological properties of phase separated pyrolysis liquid fuel. Two batches of a well – stored poplar wood pyrolysis oils were used for the investigation; one batch was diluted with water to …
Assessment Of Heavy Metal Concentration In Soils Around Geita The Gold Mine, Tanzania, Mariam G. Mgendi, Mkabwa L. K Manoko, W.J.S. Mwegoha, C. Southway C. Southway
Assessment Of Heavy Metal Concentration In Soils Around Geita The Gold Mine, Tanzania, Mariam G. Mgendi, Mkabwa L. K Manoko, W.J.S. Mwegoha, C. Southway C. Southway
Journal of Humanities and Social Sciences
Health issues related to gold mining cannot be underestimated. Gold mining produce acid mine drainage (AMD), which in turn releases heavy metals into the nearby environment, hence causing environmental pollution. Heavy metals are naturally very toxic, thus pose a great health concern especially when their concentration exceeds the recommended permissible limits. In this study, concentrations of five heavy metals—including Pb, Ni, Cr, Cu and Zn—were assessed in the soil around Geita Gold Mine (GGM). A total of 17 sampling sites were established from which the soil samples were collected at 0-15cm and 15-30cm soil depth. The concentration of both total …
Parametric Study Of Residual Stresses In Wire And Arc Additive Manufactured Parts, Hisham Khaled Jamil Abusalma
Parametric Study Of Residual Stresses In Wire And Arc Additive Manufactured Parts, Hisham Khaled Jamil Abusalma
Mechanical & Aerospace Engineering Theses & Dissertations
Wire and Arc Additive Manufacturing (WAAM) is a cost-effective additive manufacturing process due to its capability to fabricate large metal parts with high deposition rate and low equipment cost. Although this method is gaining popularity in manufacturing industry, more research is needed to understand process parameters’ effects on residual stress (RS) distribution and part distortion. As such, a 3D thermo-elastic-plastic transient model was established in ABAQUS and employed to investigate the effect of process parameters such as the torch speed, the deposition power and the interlayer dwell time on RS distribution and distortion in WAAM part. The numerical model utilized …
The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1
The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1
Tanzania Journal of Engineering and Technology (TJET)
Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …
Design And Development Of A Perfusion Bioreactor With Internal Volume Expansion And Cell Retention For Cell And Gene Therapy Manufacturing, Corinna Doris
KGI Theses and Dissertations
Economically producing patient-specific cell therapies at commercial levels remains a challenge as it requires manufacturing separate batches per patient where the production system must be scaled-out rather than scaled-up to supply more patient doses. The resulting high production cost and consequent price-point can limit patient access. Specifically, the current cell expansion processes are highly manual and laborious, with the number and complexity of operations and components increasing the opportunities for failure and contamination. This work therefore aims to design a mechanically simple bioreactor that is better suited for scale-out by consolidating the cell expansion process to fewer components, vessels, and …
On Accounting For Equipment-Control Interactions In Economic Model Predictive Control Via Process State Constraints, Helen Durand
On Accounting For Equipment-Control Interactions In Economic Model Predictive Control Via Process State Constraints, Helen Durand
Chemical Engineering and Materials Science Faculty Research Publications
Traditionally, chemical processes have been operated at steady-state; however, recent work on economic model predictive control (EMPC) has indicated that some processes may be operated in a more economically-optimal fashion under a time-varying operating policy. It is unclear how time-varying operating policies may impact process equipment, which must be investigated for safety and profit reasons. It has traditionally been considered that constraints on process states can be added to EMPC design to prevent the controller from computing control actions which create problematic operating conditions for process equipment. However, no rigorous investigation has yet been performed to analyze whether, when a …
Economic Model Predictive Control Design Via Nonlinear Model Identification, Laura Giuliani, Helen Durand
Economic Model Predictive Control Design Via Nonlinear Model Identification, Laura Giuliani, Helen Durand
Chemical Engineering and Materials Science Faculty Research Publications
Increasing pushes toward next-generation/smart manufacturing motivate the development of economic model predictive control (EMPC) designs which can be practically deployed. For EMPC, the constraints, objective function, and accuracy of the state predictions would benefit from process models that describe the process physics. However, obtaining first- principles models of chemical process systems can be time-consuming or challenging such that it is preferable to develop physics-based process models automatically from process operating data. In this work, we take initial steps in this direction by suggesting that because experiments that are used to characterize first-principles models often target specific types of data, an …
Data-Based Nonlinear Model Identification In Economic Model Predictive Control, Laura Giuliani, Helen Durand
Data-Based Nonlinear Model Identification In Economic Model Predictive Control, Laura Giuliani, Helen Durand
Chemical Engineering and Materials Science Faculty Research Publications
Many chemical/petrochemical processes in industry are not completely modeled from a first-principles perspective because of the complexity of the underlying physico-chemical phenomena and the cost of obtaining more accurate, physically relevant models. System identification methods have been utilized successfully for developing empirical, though not necessarily physical, models for advanced model-based control designs such as model predictive control (MPC) for decades. However, a fairly recent development in MPC is economic model predictive control (EMPC), which is an MPC formulated with an economics-based objective function that may operate a process in a dynamic (i.e., off steady-state) fashion, in which case the details …
Comparison Of Low-Temperature Co-Fired Ceramic And Direct Bonded Copper For Single Ended Primary Inductance Topology, Kristopher Cody Johnson
Comparison Of Low-Temperature Co-Fired Ceramic And Direct Bonded Copper For Single Ended Primary Inductance Topology, Kristopher Cody Johnson
Electrical Engineering Undergraduate Honors Theses
This work examines the thermal dissipation characteristics of Low-Temperature Co-fired Ceramic (LTCC) and Direct Bonded Copper (DBC) with the implementation of a Single Ended Primary Inductance Converter (SEPIC) topology. The advantages and disadvantages of the two substrates will be explored in addition to a description of the design and control of the SEPIC. It will be shown that the DBC implementation is superior with regards to thermal dissipation, but that LTCC has advantages in high- density packaging, RF applications, and embedded components. These substrates and converters provide many advantages in industrial applications that include automotive and grid level implementations. Additional …
Chemical Storage Of Wind Energy By Renewable Methanol Production: Feasibility Analysis Using A Multi-Criteria Decision Matrix, Michael J. Matzen, Mahdi H. Alhajji, Yaşar Demirel
Chemical Storage Of Wind Energy By Renewable Methanol Production: Feasibility Analysis Using A Multi-Criteria Decision Matrix, Michael J. Matzen, Mahdi H. Alhajji, Yaşar Demirel
Department of Chemical and Biomolecular Engineering: Faculty Publications
This study is for the technoeconomic analysis of an integral facility consisting of wind energy-based electrolytic hydrogen production, bioethanol-based carbon dioxide capture and compression, and direct methanol synthesis. ASPEN Plus was used to simulate the facility producing 97.01 mt (metric tons) methanol/day using 138.37 mt CO2/day and 18.56 mt H2/day. A discounted cash flow diagram for the integral facility is used for the economic analysis at various hydrogen production costs and methanol selling prices. The feasibility analysis is based on a multi-criteria decision matrix consisting of economic and sustainability indicators comparing renewable and non-renewable methanol productions. …
Solvent System Selection For Xylooligosaccharides Separation By Centrifugal Partition Chromatography Using Conductor-Like Screening Model For Real Solvents, He Zhang
Open Access Theses
The production of value-added, bio-based industrial commodity chemicals is an important area in science right now and this study provides an initial step in the recovery of bio-based chemicals from hemicellulose. Hemicellulose is a long chain polymer mostly consisting of xylose, which is a five-carbon sugar, and a variety of other compounds that are ubiquitous in plant life. The hemicellulose polymer chain can be depolymerized into smaller components, called xylooligosaccharides (XOS) with different chain lengths of xylose linked by beta-1-4 glycosidic bonds, using either hot water, or dilute sulfuric acid. The xylooligosaccharides can then be purified from one another from …