Industrial Engineering Commons^™

Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea

Conference papers

Due to their space limitation and small production scale, small and medium enterprises (SME) are vulner-able to rapid changes. Lean principles are considered as effective improvement approach to eliminate sys-tem’s waste and inefficiencies. Although much of the academic materials have addressed the lean practic-es into large, global companies, they can still be adjusted to SMEs. Risks are usually associated with lean implementation process due to the drastic required changes in business policies and operations. Simulation can be successfully used to predict the impact of the proposed changes ahead of the implementation which helps to mitigate risks. Integrating simulation with optimization …

Supply Chain And Logistics Technology Investment In Small And Medium-Sized Enterprises, Edward Sweeney

Practitioner Journals

No abstract provided.

The Implementation Of Total Quality Management (Tqm) In Oil And Gas Industry In Indonesia., Wakhid Slamet Ciptono

Student Works (2010-2019)

The changing environment in an organization is forcing the organization itself to find a plan of an integrated management framework and an adequate performance measurement. Failure in planning means planning a failure of an organization. Finding out the critical factors of quality management practices (QMP), the mediation of the contextual factors (world-class company practice or WCC, operational excellence practice or OE, company non financial performance or CNFP), and company financial performance or CFP is becoming the way that would facilitate the sustainability of TQM implementation model. This empirical study is aimed to assess how TQM (Total Quality Management)—a holistic management …

An Integrated Decision Support Framework For Remanufacturing In The Automotive Industry, Akhilesh Kumar

Wayne State University Dissertations

In today's global economy, firms are seeking any and every opportunity to differentiate from competitors by reducing supply chain costs and adding value to end customers. One increasingly popular option, under growing consumer awareness and increasing legislation, is to reintegrate returned products into the supply chain to achieve economic benefits as well as improve sustainability. An important class of such "reverse" goods flows has to do with remanufacturing (reman), which refers to activities that restore returned products ("cores") or their major modules to operational condition for using in place of new product or distributing through other channels (e.g., spare parts). …

Optimisation Methods In Supply Chain Applications: A Review, Amr Arisha, Waleed Abo Hamad

Conference papers

The competitiveness and dynamic nature of today’s marketplace is due to rapid advances in information technology, short product life cycles and the continuing trend in global outsourcing. Managing the resulting supply chain networks effectively is a complex and challenging task which is imputable to high level of uncertainty in supply-demand, conflict objectives, vagueness of information, numerous decision variables and constraints. With such level of complexity in the environment, supply chain optimisation has a potential to make a significant contribution to resolve the challenges. In this paper, a literature review – based on more than one hundred peer-reviewed articles – of …

An Integrated Probability-Based Approach For Multiple Response Surface Optimization, Okay Isik

Engineering Management & Systems Engineering Theses & Dissertations

Nearly all real life systems have multiple quality characteristics where individual modeling and optimization approaches can not provide a balanced compromising solution. Since performance, cost, schedule, and consistency remain the basics of any design process, design configurations are expected to meet several conflicting requirements at the same time. Correlation between responses and model parameter uncertainty demands extra scrutiny and prevents practitioners from studying responses in isolation. Like any other multi-objective problem, multi-response optimization problem requires trade-offs and compromises, which in turn makes the available algorithms difficult to generalize for all design problems. Although multiple modeling and optimization approaches have been …

Semester Project For Engineering Management, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

This is the semester-project for my IMSE 405/805 course on Engineering Management at the University of Nebraska-Lincoln. This team-based project required students to develop an operational plan (facility layout, required staffing, company operating policies, company benefits program) for a specified product.

Leanness And Agility In Job Shops: A Framework For A Survey Instrument Developed Using The Delphi Method, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

Manufacturers are facing new challenges as competition has become global. Manufacturing companies arc looking for strategies which would help them gain an edge over their competitors. In the United States, lean manufacturing and agile manufacturing have been gaining importance among industries. Agile manufacturing was developed when the United States Department of Defense (DOD) requested Iacocca Institute at Lehigh University to develop a manufacturing framework that could give US companies an edge over their worldwide competitors whereas lean manufacturing has its roots tied to the Toyota Production System (TPS). This raises the questions: what is the clear difference between the two …

Why Toyota And Honda Topped The 2002 J.D. Power Quality Study, Susan Lightle, Kenneth Yale Rosenzweig, John Talbott

Accounting Faculty Publications

Toyota again topped the annual J. D. Power and Associates quality study released in late May of 2002. Toyota scored the highest mark ever with l 07 defects per l 00 vehicles, while Honda came in second with 113 defects. The study was based on responses of approximately 65,000 new car owners queried during their first 90-days of ownership.

These results do not surprise us, as we have been fortunate to make numerous sojourns to the Toyota plant in Georgetown, Kentucky, and observe the manufacturing processes. These trips were normally facilitated by a former Japanese student of ours, Minako Yanke, …

The Quality Problem Solving Method And Its Effectiveness At Nortech Inc., Jeffrey Henderson

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

A Comparative Study On Projected And Actual Manufacturing Times To Identify The Source Of Customer Delinquency, Zaki Kuruppalil

All-Inclusive List of Electronic Theses and Dissertations

This study was an investigation of the projected lead time and the actual lead time for a part manufactured at Tri-Industries Inc., Terre Haute, Indiana. The research was focused on a single part produced in Tri-Industries. The problem was that there is a difference in the projected lead time and the actual lead time of the part under investigation. The actual lead time was longer than projected lead time, which resulted in the company being delinquent in customer delivery. This investigation was conducted to find out the source for customer delinquency for a single part in Tri-Industries. The conclusion was …

Meta-Ethnographic Development Of A Dialogue Methodology Applied To Organization Discourse, Shelley P. Gallup

Engineering Management & Systems Engineering Theses & Dissertations

A gap exists between theoretical stances that acknowledge the importance of dialogue as a dynamic within socially constructed structures, and "steersmanship" of those constructs--e.g., directing, intervening or transforming organizations. A "mechanism" which links theory with practice is missing, leaving practitioners with an acknowledgment of dialogue's central position, but without tools to enact this centrality in practice or research. This research constructs a conceptual model of dialogue, derived from the literature. Using this model as a base, the research seeks to generate a dialogue methodology bridging theory and practice with respect to organizational dialogue. The model, methodology, and research results are …

An Evaluation Of The Implementation Of Total Quality Management In A Service Organization, Charles Stanford Stevens

Engineering Management & Systems Engineering Theses & Dissertations

This research consists of a formative evaluation designed to identify the steps necessary to revitalize a formerly successful Total Quality Management (TQM) process at a U.S. Navy engineering and logistics support organization. The research also developed a methodology to account for the fact that the investigator is a well-informed insider who served as one of the principle change agents for the TQM implementation.

The research is based on the researcher's observation that the major cause for the waning implementation was due to senior management and leadership issues and the organization-wide processes with which they interface. The investigation consisted of an …

Diffusion Of Total Quality Management: An Organizational Self-Production Perspective, Baizhong Zhao

Engineering Management & Systems Engineering Theses & Dissertations

American industries are in the process of a quality revolution. Most companies are busy implementing Total Quality Management (TQM) programs. However, the experience of both Japanese and American companies indicates that successful TQM implementation depends on an understanding of implementation processes, which itself relies on an understanding of organizational self-organizing, for it is through this process that TQM gets diffused and becomes a core component of an organization's culture. Self-organizing is a so-called process-oriented approach, based on theory from cybernetics (Ashby, 1962; Steier & Smith, 1985; von Foerster, 1960), dissipative structure theory (Prigogine & Stengers, 1984), and chaos theory (Gleick, …

The Relationship Between Management Training And Other Predictor Variables And Managerial Performance Among Selected Industrial First-Line Supervisors, Joseph Thomas Martelli

Dissertations and Theses @ UNI

The purpose of this study was to determine whether a relationship exists between industrial first-line supervisors' participation in management training programs and subsequent job related performance as assessed by the subjects' overall management by objectives (MBO) performance appraisal rating .

Also, the relationship between managerial performance and predictor variables (age, years of supervisory experience, formal education level, self development, prior management training, and professional society involvement) was assessed.

Twenty-three first-line supervisors from a medium sized manufacturing organization participated in the study. A questionnaire was designed which extracted measures on the predictor variables from the subjects. Corporate management supplied the measure …