Operations Research, Systems Engineering and Industrial Engineering Commons^™

Model Development Of A Virtual Learning Environment To Enhance Lean Education, Akalpit Gadre, Elizabeth Cudney, Steven Corns

Engineering Management and Systems Engineering Faculty Research & Creative Works

Modern day industry is becoming leaner by the day. This demands engineers with an in-depth understanding of lean philosophies. Current methods for teaching lean include hands-on projects and simulation. However, simulation games available in the market lack simplicity, ability to store the results, and modeling power. the goal of this research is to develop a virtual simulation platform which would enable students to perform various experiments by applying lean concepts. the design addresses these deficiencies through the use of VE-Suite, a virtual engineering software. the design includes user-friendly dialogue boxes, graphical models of machines, performance display gauges, and an editable …

Evaluating The Impact Of Patient Arrival Patterns In The Performance Of Appointment Scheduling Rules, Alcides Santander-Mercado, Jose Zayas-Castro, Laila Cure, Ali Yalcin

Laila Cure

This paper evaluates the ability of commonly used Appointment Scheduling Rules (ASRs) in smoothing the effect of environmental factors in the performance of an outpatient scheduling system. ASRs have been widely implemented in outpatient clinics to improve performance measures such as staff idle time, patient waiting time, and facility congestion. However, the successful implementation of an ASR depends on its ability in dealing with the environmental factors affecting the system. Factors such as no-shows, variability of consultation times, patient unpunctuality, walk-in patient arrivals and the number of admitted patients per session affect the performance of the clinics in terms of …

A Reinforcement Learning Approach For Inventory Replenishment In Vendor-Managed Inventory Systems With Consignment Inventory, Zheng Sui, Abhijit Gosavi, Li Lin

Engineering Management and Systems Engineering Faculty Research & Creative Works

In a Vendor-Managed Inventory (VMI) system, the supplier makes decisions of inventory management for the retailer; the retailer is not responsible for placing orders. There is a dearth of optimization models for replenishment strategies for VMI systems, and the industry relies on well-understood, but simple models, e.g., the newsvendor rule. in this article, we propose a methodology based on reinforcement learning, which is rooted in the Bellman equation, to determine a replenishment policy in a VMI system with consignment inventory. We also propose rules based on the newsvendor rule. Our numerical results show that our approach can outperform the newsvendor. …

Customer Management Analysis Of Irish Plumbing & Heating Distribution System: A Simulation Study, Amr Arisha, Amr Mahfouz, John Crowe, Finbarr Bennett

Conference papers

The sudden burst of the property bubble, coupled with current global economic conditions has resulted in a huge decrease in demand for plumbing and heating fixtures in the Irish construction industry. Moreover, inefficient supply chain management policies have imposed further pressures on companies resulting in more system bottlenecks and unnecessary costs. Inventory management is seen as a functional area that can ease such bottlenecks and in turn increase supply chain efficiency, decrease costs and increase customer satisfaction. The challenge is to predict the balance of on-hand inventory and order quantity to optimise customer satisfaction and minimise inventory cost. It is …

Police Operations Simulation, Robert Mcgee

Industrial and Manufacturing Engineering

In this report, the author explains the process of creating the Police Operations Simulation, shows step-by-step how it works, and statistically analyzes the results from SLOPD’s own proposed and current schedules. The data-gathering from the department and the simulation itself will receive the bulk of the coverage in this report, followed by sample results from SLOPD and a business plan for future sale to other departments.

Using the given numbers, it appears that the proposed schedule will result in significantly improved coverage for the city of San Luis Obispo. While any increase in the number officers on patrol tends to …

Nato Human View Architecture And Human Networks, Holly A. H. Handley, Nancy P. Houston

Engineering Management & Systems Engineering Faculty Publications

The NATO Human View is a system architectural viewpoint that focuses on the human as part of a system. Its purpose is to capture the human requirements and to inform on how the human impacts the system design. The viewpoint contains seven static models that include different aspects of the human element, such as roles, tasks, constraints, training and metrics. It also includes a Human Dynamics component to perform simulations of the human system under design. One of the static models, termed Human Networks, focuses on the human-to-human communication patterns that occur as a result of ad hoc or deliberate …

Rfid-Enabled Inventory Control Optimization: A Proof Of Concept In A Small-To-Medium Retailer, H. Dane, Katina Michael, S. F. Wamba

Dr Samuel Fosso Wamba

This study examines the impact of radio-frequency identification (RFID) technology on the inventory control practices of a small-to-medium retailer using a proof of concept (PoC) approach. The exploratory study was conducted using a single case study of a hardware retailer stocking 5000 product lines provided by 110 active suppliers. To analyze the present mode of operation, procedural documents, semi-structured interviews and a participant observation was conducted. The basis for the proof of concept was a future mode of operation using a quasi-experimental design. Results indicate that in a small-to-medium retail environment, RFID technology could act as a loss prevention mechanism, …

Rfid-Enabled Inventory Control Optimization: A Proof Of Concept In A Small-To-Medium Retailer, H. Dane, Katina Michael, S. F. Wamba

Faculty of Informatics - Papers (Archive)

This study examines the impact of radio-frequency identification (RFID) technology on the inventory control practices of a small-to-medium retailer using a proof of concept (PoC) approach. The exploratory study was conducted using a single case study of a hardware retailer stocking 5000 product lines provided by 110 active suppliers. To analyze the present mode of operation, procedural documents, semi-structured interviews and a participant observation was conducted. The basis for the proof of concept was a future mode of operation using a quasi-experimental design. Results indicate that in a small-to-medium retail environment, RFID technology could act as a loss prevention mechanism, …

A Methodology To Stabilize The Supply Chain, Alfonso Sarmiento

Electronic Theses and Dissertations

In today's world, supply chains are facing market dynamics dominated by strong global competition, high labor costs, shorter product life cycles, and environmental regulations. Supply chains have evolved to keep pace with the rapid growth in these business dynamics, becoming longer and more complex. As a result, supply chains are systems with a great number of network connections among their multiple components. The interactions of the network components with respect to each other and the environment cause these systems to behave in a highly nonlinear dynamic manner. Ripple effects that have a huge, negative impact on the behavior of the …

Practical Simulation Application: Evaluation Of Process Control Parameters In Twisted-Pair Cables Manufacturing System, Amr Mahfouz, Amr Arisha

Articles

Intensive competition and rapid technology development of Twisted-Pair Cables (TPC) industry have left no room for competing manufacturers to harbour system inefficiencies. TPC are used in various communication and networks hardware applications; their manufacturing facilities face many challenges including various product configurations with different equipment settings, different product flows and Work in Process (WIP) space limitations. The quest for internal efficiency and external effectiveness forces companies to align their internal settings and resources with external requirements/orders, or in different words, significant factors must be set appropriately and identified prior to manufacturing processes. Integrated definition models (IDEF0, IDEF3) in conjunction with …

Simulation Model To Investigate Flexible Workload Management For Healthcare And Servicescape Environment, Michael Thorwarth, Paul Harper, Amr Arisha

Conference papers

High demand and poor staffing conditions cause avoidable pressure and stress among healthcare personnel which results in burnout symptoms and unplanned absenteeism which are hidden cost drivers. The work environment within an emergency department is commonly arranged in a flexible workload which is highly dynamic and complex for the outside observer. Using detailed simulation modeling within structured modeling methods, a comprehensive model to characterize the nurses' time utilization in such flexible dynamic workload environment was investigated. The results have been used to derive a generalized analytic expression that describes certain settings that lead to an instable queuing system with serious …

Course Portfolio - Discrete Event Simulation, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This course portfolio, written by Dr. Paul Savory, provides an overview of his Discrete Event Simulation course at the University of Nebraska-Lincoln. It offers an overview of the course goals, a summary of the classroom activities for achieving them, and a detailed assessment of student learning. He highlights his introduction of the simul8 programming environment to his students. In addition to exploring his students’ learning, Dr. Savory also explores different approaches for documenting his teaching by including multimedia clips (video and audio), uses graphs, uses color, and incorporates images. The resulting portfolio is one that can be reviewed, shared, and …

Simulation Modeling Of Electronic Health Records Adoption In The U.S. Healthcare System, Nadiye O. Erdil, C. Robert Emerson

Engineering and Applied Science Education Faculty Publications

Increasing the efficiency of the healthcare system in the United States is an important subject due to rapidly rising costs. Among many propositions to improve the operation of the system, adoption of Electronic Health Records is widely discussed. This study uses a system dynamics methodology to develop a simulation model of the adoption process that will allow for the exploration of policies. This paper presents the development and the preliminary findings of this model.

Dod Acquisition Workforce Education: An Sba Education Case Study, Richard Davenport

Electronic Theses and Dissertations

A Department of Defense (DoD) M&S education task force is in the process of studying the Modeling and Simulation (M&S) education of the acquisition workforce. Historically, DoD acquisition workforce education is not referred to as education, but rather what the Defense Acquisition University (DAU) refers to as "practitioner training, career management, and services." The DAU is the organization primarily responsible for training the DoD acquisition corps in conjunction with service schools and strategic partners in the civilian sector. DAU programs primarily focus on program management, contracting, and management of logistics across the system life cycle. Further, the examples and cases …

Presence-Dependent Performance Differences Between Virtual Simulations And Miniature Worlds, Andre Huthmann

Electronic Theses and Dissertations

The purpose of simulation is to avoid reality-based constraints by the implemen-tation of a synthetic model. Based on this advantage, interactive simulations have conquered all areas of applications from acquisition, and training, to research. Simulation results are transferred in many ways into reality and conclusions are drawn from the simulation to the application. Many anecdotal observations on human-in-the-loop simulations have shown a significant difference in actor behavior between simulations and reality-based applications. It seems that the factors that makes simulation so attractive, namely the absence of constraints and especially of imminent danger for persons and equipment, influence the behavior and …

Formal Verification Of Urban Traffic System Using The Concept Of Fuzzy Workflow Simulation, Manuj Darbari, Abhay Kumar Srivastava, Sanjay Medhavi

Journal of International Technology and Information Management

Modeling complex urban traffic system requires extensive use of workflow methodologies which can simulate almost real time traffic situations. Number of studies were done in the field of Urban Traffic Simulation like PLOTS, NETSIM and PALAMICS but none of them could provide a real formal solution. Our paper proposes a methodology using Fuzzy Petri nets for modeling real time traffic system. Fuzzy Petrinets are also visualised and tested by using Flow- Charter and HPSIM software packages. These packages help in providing successive iterations of process model for further refinement.

Sensitivity Analysis Framework For Large And Complex Simulation Models, Ghaith Rabadi, Shannon Bowling, Charles Keating, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

In this paper, a framework for conducting Sensitivity Analysis (SA) on large and complex simulation models is introduced. The framework consists of components that are designed to make the SA a systematic process that is easy to manage and follow by simulation analysts and practitioners. Unlike local SA (one-variable-at-a-time SA), the method presented here is variance-based and it is rooted in the field of Design of Experiments (DoE) where Input Variables are varied and Output Variables are measured. Based on the DoE results, a risk scoring system is developed to identify the sensitivity of the Input Variables, and as a …

Dynamic Analysis Of Less-Than-Truckload Shipments And Test Method To Simulate This Environment, Sher Paul Singh, E. Joneson, Jay Singh, G. Grewal

Industrial Technology and Packaging

This paper provides results from a comprehensive data measurement study that analyzed the vibration dynamics produced inside the trailers used for less-than truckload (LTL) shipments. The trailers used for this segment of the package transportation environment are very different in size and suspension than those used for full truckload shipments. This study measured the vertical, lateral and longitudinal vibration inside a trailer as a function of road surface. In addition, the study developed a video showing freight movement inside the trailer to determine physical displacement and shifting of the loads. A set of recommendations was developed to safely load and …

Modeling Systems For Optimal Resource Allocation, Scheduling, And Decision Making, Esengul Tayfur

All Dissertations

This dissertation focuses on the resource requirements and scheduling problem for logistic systems. We investigate solutions to this problem in two different logistic systems: logistic system of the health care facilities during emergency evacuations and delivery and distribution system of production industries. All hospitals must have an evacuation plan to ensure the safety of patients and prevent the loss of life. However, hospital operators have not been able to quantify how resource availability, the cost of acquiring those resources, and evacuation completion time are related. This research addresses this problem and contributes two methodologies to solve this problem. In the …

Implementation Of Simulation For Network Service Delivery Point Capacity Analysis, Tiffany Jill Harper

Browse all Theses and Dissertations

As businesses consolidate and modernize their operations, the impact on their network and computing infrastructure is a major consideration. In this thesis, discrete event simulation is used to show how implementation of an Enterprise Resource Planning (ERP) system can impact network performance and ultimately affect end-users. More specifically, the model simulates the flow of data packets across a network, through a Service Delivery Point (SDP), which is comprised of routers, switches, and firewalls that connect a Local Area Network to a Wide Area Network.

The model was used to run to determine the affect of more network traffic and additional …

Details And Description Of Operations Research, Paul Savory

Industrial and Management Systems Engineering: Reports

The ambiguous term operations research was coined during World War II. A frequent substitute is management science. Operations research is a scientific approach to analyzing problems and making decisions. It uses mathematics and mathematical modeling on computers to forecast the implications of various choices and zero in on the best alternatives. This content paper provides an overview of operations research. It highlights operations research problems, methods for solving problems, different areas of operations research, and example problems.

Process Modelling Support For The Conceptual Modelling Phase Of A Simulation Project, Cathal Heavey, John Ryan

Conference papers

While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the conceptual modelling phase. Several authors have reported the advantages of using process modelling tools in the early phases of a simulation project.

This paper provides an overview of process modelling tools in relation to their support for simulation, categorizing the tools into formal method and descriptive methods. A conclusion from this review is that none of the tools available adequately support the requirements gathering phase of simulation. This is not surprising as none of the process modelling …

Parallel Simulated Annealing For Scheduling Agile Manufacturing Systems, Ahmed Osama Abdulrahman

Archived Theses and Dissertations

The problem addressed in this research is the scheduling of an agile manufacturing system comprised of machining and assembly operations with the objective of minimizing the makespan. This problem has been addressed in the literature using heuristics and metaheuristics. In addition, a lower bound has been developed. This research builds upon the findings of the recent literature and proposes two enhanced algorithms, parallel simulated annealing and parallel modified simulated annealing, to solve the addressed problem. The performance of the developed algorithms is compared to that of another simulated annealing algorithm that is available in the literature. Performance comparisons are based …

Patterns In Team Communication During A Simulation Game, David M. Baca, Ray Luechtefeld, Steve Eugene Watkins

Engineering Management and Systems Engineering Faculty Research & Creative Works

The development of communication skills is a necessary preparation for effective engineering teamwork. Argyris' "Theory of Action" provides a framework for understanding patterns in team dialogue. Students can benefit from an awareness of these patterns. The theory highlights the detection and correction of errors by sharing information during group collaboration and interactions. Quality decision-making can be enhanced when members of a team develop high degrees of openness and interdependence. Quality decision-making can be diminished when members of a team regulate the information shared within the team. This work analyzes team interactions from simulation games used in an interdisciplinary engineering course …

Process Modeling For Simulation, John Ryan, Cathal Heavey

Articles

This paper discusses shortfalls in relation to the requirements gathering phases of simulation. While many developments have taken place around supporting the model coding task of simulation, there are few tools available to assist in the requirements gathering phase. This is surprising as it has been reported by several researchers that the requirements phase can absorb twice as much resources as the coding phase. There are numerous process modeling tools available (over 100) that can and have been used to support the requirements phase of simulation. This paper provides a selective review of some of the most important in relation …

Requirements Gathering For Simulation, John Ryan, Cathal Heavey

Conference papers

This paper discusses the current shortfalls in support for the pre-coding phases of a discrete event simulation project. The paper then presents a process modelling technique, Simulation Activity Diagrams (SADs), developed to specifically support the initial requirements gathering phases of a simulation project. The paper concludes with an outline of proposed future developments to the modelling technique.

A Dynamic Heuristic For The Stochastic Unrelated Parallel Machine Scheduling Problem, Jean-Paul Arnaout, Ghaith Rabadi, Ji Hyon Mun

Engineering Management & Systems Engineering Faculty Publications

This paper addresses the problem of batch scheduling in an unrelated parallel machine environment with sequence dependent setup times and an objective of minimizing the total weighted mean completion time. The jobs' processing times and setup times are stochastic for better depiction of the real world. This is a NP-hard problem and in this paper, new heuristics are developed and compared to existing ones using simulation. The results and analysis obtained from the computational experiments proved the superiority of the proposed algorithm PMWP over the other algorithms presented.

Development Of A Process Modelling System For Simulation, John Ryan

Other resources

This thesis details the development of a process modelling technique to aid a simulation model developer during the requirements gathering and conceptual modelling phases of a simulation project.

There are a number of process modelling techniques available that are capable of being used during such phases of a simulation project, however there is currently a lack of process modelling techniques developed specifically to aid a simulation model developer in capturing, representing and communicating information and systems issues to persons involved in the operation of discrete systems under investigation.

A detailed review of the literature related to techniques capable of supporting …

Enhancing Erp System’S Functionality With Discrete Event Simulation, Young Moon, Dinar Phatak

Mechanical and Aerospace Engineering - All Scholarship

Purpose – To develop a methodology to augment enterprise resource planning (ERP) systems with the discrete event simulation’s inherent ability to handle the uncertainties.

Design/methodology/approach – The ERP system still contains and uses the material requirements planning (MRP) logic as its central planning function. As a result, the ERP system inherits a number of shortcomings associated with the MRP system, including unrealistic lead-time determination. The developed methodology employs bi-directional feedback between the non-stochastic ERP system and the discrete event simulation model until a set of converged lead times is determined.

Findings – An example of determining realistic production lead-time data …

Intelligent Simulation-Based Lot Scheduling Of Photolithography Toolsets In A Wafer Fabrication Facility, Amr Arisha, Paul Young

Conference papers

Scheduling of a semiconductor manufacturing facility is one of the most complex tasks encountered. Confronted with a high technology product market, semiconductor manufacturing is increasingly more dynamic and competitive in the introduction of new products in shorter time intervals. Photolithography, being one of the processes repeated often, is a fabrication bottleneck. Lot scheduling within photolithography is a challenging activity where substantial improvements in factory performance can be made. The proposed scheduling methodology integrates two common approaches, simulation and artificial intelligence. Using detailed simulation modeling within a structured modeling method, a comprehensive model to characterize the photolithography process was developed. An …