Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Screening Life Cycle Analysis Of One-Way And Reusable Crate Designs – Estimating Environmental Impacts Via Lca Software, Nicolas R. Corona

Master's Theses

A comparison analysis conducted via COMPASS life cycle analysis software has indicated that a one-way crate design, rather than a reusable crate design, is in fact the more environmentally friendly packaging system. These results can be interpreted differently, however, as the manufacturer of said crate designs must confirm what impact indicators they would like to reference as environmental goalposts. The conducted analysis provides insight into what the environmental impacts of each packaging system look like as packaging at all three system levels has been identified as a means of reducing environmental impacts globally. As such, the manufacturer of said crate …

Analysis Of Rural Broadband Adoption Dynamics: A Theory-Driven Agent-Based Model, Ankit Agarwal, Casey Canfield

Engineering Management and Systems Engineering Faculty Research & Creative Works

Demand for broadband internet has far outpaced its availability. In addition, the "new normal" imposed by the COVID-19 pandemic has further disadvantaged unserved and underserved areas. To address this challenge, federal and state agencies are funding internet service providers (ISPs) to deploy broadband infrastructure in these areas. To support goals to provide broadband service to as many people as possible as quickly as possible, policymakers and ISPs may benefit from better tools to predict take rates and formulate effective strategies to increase the adoption of high-speed internet. However, there is typically insufficient data available to understand consumer attitudes. We propose …

Effective And Sustainable Strategies For Federally Qualified Health Centers To Engage Young Adults, Olivia Mcnulty

Master's Theses

Federally qualified health centers (FQHCs) are instrumental in providing top tier healthcare and other resources to underserved populations. Whether they administer services in house or refer patients to other providers, FQHCs aim to provide comprehensive primary and preventative care services to people of all ages. They offer a range of services, from doctor and dental appointments to mental health and substance abuse counseling, regardless of a patient’s insurance status. To receive funding, FQHCs must follow the regulations and quality standards set forth by groups like the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) and the Health Resources and Services …

Waste Illuminates Worlds: Printed Modular Lamp Design Based On Brick And Clay Tile, Yechen Zhu

Masters Theses

The building industry in the New England area is often in a state of entropy, with abandoned brick buildings contributing to urban decay. The recycling rate of brick and clay tile wastes generated by construction and demolition is only 12.2%, meaning the majority is sent to landfills. The expansion of landfills can lead to significant environmental and community challenges, including increased traffic from waste transport, habitat destruction, ecosystem degradation, and contributions to climate change. Specifically, the Bethlehem landfill in New Hampshire, which is planned to undergo a 5.71-acre lateral expansion through 2026, has already encountered issues such as leachate spills …

Barcode Medication Administration (Bmca): 2023-24, Krishan R. Patel, Carlos E. Sosa, Mary Grace Sy

Industrial and Manufacturing Engineering

The Barcode Medication Administration is an important system implemented within a hospital. It is the process in which nurses and other healthcare professionals prescribe and distribute medication to the patients. It aids in organizing which patient got prescribed which medication from which doctor and provides records on who was given care by who. The whole BCMA system is a multi-step process from getting the medication prescribed, to the nurses having to pick up the medication from the medication cabinet, and then having to scan the patient and the medication to finally administer medications.

The current BCMA system implemented at the …

Communication Challenges In Underwater Wireless Networks: Mac Protocols And Software Solutions, Dmitrii Dugaev

Dissertations, Theses, and Capstone Projects

Underwater wireless networks (UWNs) represent a diverse and intriguing research domain, encompassing a wide array of scientific and industrial applications. This dissertation delves into the communication challenges at the Medium Access Control (MAC) layer within UWNs, stemming from the distinctive signal propagation conditions and the harshness of the deployment environment. The manuscript provides comprehensive coverage of key aspects of UWNs, including potential applications, communication protocols, methodologies employed in such networks, and existing software solutions that facilitate simulation, emulation, and real testbed scenarios for underwater research endeavors. Furthermore, this research introduces innovative software and communication solutions designed to facilitate the seamless …

Evaluating Climate Sentiment In Sec 10-K Filings: S&P 50 Companies, Ruby Chu

Dissertations, Theses, and Capstone Projects

Evaluating Climate Sentiment in SEC 10-K Filings: S&P 50 Companies investigates how climate sentiment is portrayed in corporate financial reporting, focusing on SEC 10-K filings from leading S&P 50 companies. These filings offer detailed insights into financial performance, risks, and management discussions, providing a rich dataset for analyzing corporate behaviors with sustainability and environmental concerns. This study aims to shed light on the extent to which companies address environmental issues and the implications for environmental stewardship by analyzing how these topics are portrayed in their SEC 10-K filings. Drawing inspiration from established greenwashing indicator frameworks, the study develops a climate …

Predicting Rheology Of Uv-Curable Nanoparticle Ink Components And Compositions For Inkjet Additive Manufacturing, Cameron D. Lutz

Master's Theses

Inkjet additive manufacturing is the next step toward ubiquitous manufacturing by enabling multi-material printing that can exhibit various mechanical, electronic, and thermal properties. These characteristics are realized in the careful formulation of the inks and their functional materials, but there are many constraints that need to be satisfied to allow optimal jetting performance and build quality when used in an inkjet 3-D printer. Previous research has addressed the desirable rheology characteristics to enable stable drop formation and how the metallic nanoparticles affect the viscosity of inks. The contending goals of increasing nanoparticle-loading to improve material deposition rates while trying to …

Smart Manufacturing For Cal Poly's Ime Curriculum, Grace L. Guarraia, Eric F. Ledesma

Industrial and Manufacturing Engineering

California Polytechnic State University, San Luis Obispo (Cal Poly) takes pride of supporting one of the nation’s strongest undergraduate Industrial and Manufacturing Engineering programs. However, as industry evolves to accommodate advancing computing power, improved manufacturing algorithms, and improved robotics, it is imperative that Cal Poly’s curriculum evolves in parallel. Smart manufacturing is the future of the manufacturing industry, and Cal Poly is searching for the ideal method to teach and integrate Smart Manufacturing into its classes. With its upcoming switch to the semester system, coupled with its “Learn by Doing” motto, the department is at an ideal period for the …

Exporting Sysml Designs To Simulink, Drew Q. Broadbent

Theses and Dissertations

Various software systems have been developed to aid a systems engineer in evaluating system requirements, such as Dassault’s Magic System of Systems Architect (MSOSA) and MathWorks’ Simulink. Both software packages have different strengths; therefore, it is beneficial to export models from one software package to another. MSOSA provides a built-in tool that facilitates this transfer, built upon the Extension for Physical Interaction and Signal Flow Simulation (SysPhS) standard. However, the process is often unreliable and error prone and online documentation is largely lacking. This research used extensive trial and error to fill in the documentation gaps and create a method …

Network-Based Representations And Dynamic Discrete Choice Models For Multiple Discrete Choice Analysis, Huy Hung Tran, Tien Mai

Research Collection School Of Computing and Information Systems

In many choice modeling applications, consumer demand is frequently characterized as multiple discrete, which means that consumer choose multiple items simultaneously. The analysis and prediction of consumer behavior in multiple discrete choice situations pose several challenges. In this paper, to address this, we propose a random utility maximization (RUM) based model that considers each subset of choice alternatives as a composite alternative, where individuals choose a subset according to the RUM framework. While this approach offers a natural and intuitive modeling approach for multiple-choice analysis, the large number of subsets of choices in the formulation makes its estimation and application …

Imitating Cost-Constrained Behaviors In Reinforcement Learning, Qian Shao, Pradeep Varakantham, Shih-Fen Cheng

Research Collection School Of Computing and Information Systems

Complex planning and scheduling problems have long been solved using various optimization or heuristic approaches. In recent years, imitation learning that aims to learn from expert demonstrations has been proposed as a viable alternative to solving these problems. Generally speaking, imitation learning is designed to learn either the reward (or preference) model or directly the behavioral policy by observing the behavior of an expert. Existing work in imitation learning and inverse reinforcement learning has focused on imitation primarily in unconstrained settings (e.g., no limit on fuel consumed by the vehicle). However, in many real-world domains, the behavior of an expert …

Analyzing Swimming Performance Using Drone Captured Aerial Videos, Ngoc Doan Thu Tran, Kenny Tsu Wei Choo, Shaohui Foong, Hitesh Bhardwaj, Shane Kyi Hla Win, Wei Jun Ang, Kenneth T. Goh, Rajesh Krishna Balan

Research Collection School Of Computing and Information Systems

Monitoring swimmer performance is crucial for improving training and enhancing athletic techniques. Traditional methods for tracking swimmers, such as above-water and underwater cameras, face limitations due to the need for multiple cameras and obstructions from water splashes. This paper presents a novel approach for tracking swimmers using a moving UAV. The proposed system employs a UAV equipped with a high-resolution camera to capture aerial footage of the swimmers. The footage is then processed using computer vision algorithms to extract the swimmers' positions and movements. This approach offers several advantages, including single camera use and comprehensive coverage. The system's accuracy is …

Strawberry Nectar Preservation Through Innovative Techniques And Energy Evaluation For High-Pressure Processing, Caterina Scaioli

Theses

Strawberries are universally adored by people of all ages, owing to their richness in vitamins, nutrients, and antioxidants, offering myriad health benefits, including combating free radicals. However, despite their popularity, strawberry juices or nectars are not commonly found in markets due to their delicate structure, which makes them prone to rapid deterioration of their prized qualities and vibrant red color. In the food industry, preventing browning and nutrient deterioration are often the primary challenges faced when processing red juices. Traditional preservation methods, such as pasteurization, are inadequate in maintaining their freshness. The focus of this study is to explore alternative …

Neural Operator For Accelerating Coronal Magnetic Field Computations In Bifrost Mhd Model, Yutao Du

Theses

The application of the Tensorized Fourier Neural Operator (TFNO) to significantly enhance the computational efficiency of coronal magnetic field calculations within the Bifrost Magnetohydrodynamics (MHD) model is introduced in this study. Leveraging simulated data from the European Sunrise Science Data Center, the TFNO? an extension of the Fourier Neural Operator (FNO) that incorporates tensor decomposition for improved handling of high-dimensional data?is employed to solve time-varying partial differential equations (PDEs) over a 3D domain. The performance of the TFNO is compared with traditional machine learning methods, including Vision Transformer and CNN-RNN (encoder-decoder) architectures, to demonstrate its accuracy, computational efficiency, and scalability. …

Connection-Saving Gate Assignment: A Computational Approach, Rob Mailley

Computer Science Senior Theses

The growth of the commercial aviation industry has yielded many interesting problems in the field of Operations Research, many of which are now able to be solved as both technology and mathematical optimization improve. A particularly interesting problem in airport operations re- search is the Aircraft Gate Assignment Problem (AGAP), which seeks to create a feasible match- ing between planes and flights at an airport. This problem is well-suited to modeling with Integer Programming, and has attracted research since the 1970s. Researchers of the AGAP have considered many different objectives, ranging from airline-focused objectives to more passenger-focused objective functions. In …

Optimal Planning And Design Of Operations And Maintenance Systems For Offshore Wind Farms, Md Imran Hasan Tusar

LSU Doctoral Dissertations

Feasible and sustainable sources of power are a critical issue nowadays. Offshore wind farms (OWF) can be a solution to power generation problems, but it is relatively more expensive— their installation cost is more than twice of their comparable size onshore counterparts. The cost that matters most is the operations and maintenance (O&M) cost. Expensive and sophisticated transfer vehicles and highly skilled technicians are needed to conduct O&M activities, resulting in a remarkably higher O&M cost for an offshore wind farm project. Offshore wind turbines can capture more wind than onshore turbines because of their larger structure and location in …

Enhancing Electrical Network Vulnerability Assessment With Machine Learning And Deep Learning Techniques, M Mishkatur Rahman, Ayman Sajjad Akash, Harun Pirim, Chau Le, Trung Le, Om Prakash Yadav

Northeast Journal of Complex Systems (NEJCS)

This research utilizes advanced machine learning techniques to evaluate node vul-
nerability in power grid networks. Utilizing the SciGRID and GridKit datasets, con-
sisting of 479, 16,167 nodes and 765, 20,539 edges respectively, the study employs
K-nearest neighbor and median imputation methods to address missing data. Cen-
trality metrics are integrated into a single comprehensive score for assessing node
criticality, categorizing nodes into four centrality levels informative of vulnerability.
This categorization informs the use of traditional machine learning (including XG-
Boost, SVM, Multilayer Perceptron) and Graph Neural Networks in the analysis.
The study not only benchmarks the capabilities of these …

Dense Video Description Method Based On Multi-Modal Fusion In Transformer Network, Xiang Li, Haifeng Sang

Journal of System Simulation

Abstract: In order to solve the problems that most of the current dense video description models use twostage methods, which have low efficiency, ignore audio and semantic information, and have incomplete description results, a multi-modal and semantic information fusion dense video description method was proposed. An adaptive R(2+1)D network was proposed to extract visual features, a semantic detector was designed to generate semantic information, audio features were added to supplement it, a multi-scale deformable attention module was established, and a parallel prediction head was applied to accelerate the convergence rate and improve the accuracy of the model. The experimental results …

Research On Simulation Model Of Double-Layer Expansion Design Of Expressway, Jiandong Qiu, Yi Tang, Yuxiong Ji, Heng Liu, Junsha Luo

Journal of System Simulation

Abstract: Aiming at the problems that the traditional traffic simulation technology has insufficient evaluation accuracy and little application effect in the three-dimensional composite expansion scenario of expressway, a simulation model construction method for double-layer expansion design of expressway was proposed. The reconstruction and expansion project of Shenzhen Jihe Expressway is selected as the research object, the three simulation model modeling elements, including road network facilities, traffic demand data, and driving behavior model parameters, are sorted out, and the technical process of simulation modeling is proposed. The whole road network including key infrastructure such as interchange, toll station, ramp up and …

A Graph Neural Network Visual Slam Algorithm For Large-Angle View Motion, Jinhui Liu, Mengyuan Chen, Pengpeng Han, Hebao Chen, Yukun Zhang

Journal of System Simulation

Abstract: Aimed at the difficulty of feature point extraction in mobile robots with drastic changes in illumination or sparse texture scenes under large-angle view motion, difficulty in matching features at extreme angles leads to large errors in Epipolar Geometry calculations, a fusion of an improved graph neural network based visual SLAM algorithm (GNN-SLAM) is proposed. The priori location estimation feature extraction network is proposed to achieve fast and uniform detection and description of image feature points by a priori location estimation and to construct real and accurate feature point information. The graph attention mechanism feature matching network is proposed to …

Implementation And Numerical Simulation On Object-Oriented Elastic-Plastic Finite Element Method Based On Python, Henghui Li, Yingxiong Xiao

Journal of System Simulation

Abstract: With the continuous expansion of the application fields of finite element methods, higher requirements are put forward for the scalability of finite element methods. In order to overcome the defects of the traditional finite element methods, a simple and easily extensible object-oriented elasticplastic finite element program framework is proposed based on Python. Combined with the characteristics of Python, we design some finite element classes such as the pre-processing class, the post-processing class, the linear solution class, the stress integration class and the analysis class. By applying the resulting framework to several typical elastic-plastic mechanical problems and comparing the results …

Optimization Of Highway Emergency Lane Control Based On Kriging Genetic Algorithm, Jinjun Tang, Lipeng Hu, Mingyang Li, Xuan Zhang

Journal of System Simulation

Abstract: To address the issue of how to effectively improve the highway operational efficiency and reduce the safety risks under different traffic flow conditions, this study proposed a genetic algorithm based on Kriging agent model is proposed to optimize the emergency lane control strategy. A mathematical optimization model is designed by combining the spatial and temporal characteristics of the emergency lane opening strategy. By introducing Kriging agent model, combining the genetic algorithm to build the optimization framework, and using simulation software to obtain data to train the agent model, the problem of minimizing the total travel time and the total …

Research On Forest Fire Spread Simulation System Based On Osg, Lei Shao, Xiaotian Yan, Jian Liu, Yuming Liu

Journal of System Simulation

Abstract: A novel expended lattice structure of DEM-Cell model incorporating DEM elevation information is proposed, in response to the requirements of extrapolation of trends and hazards of forest fire spread, as well as the need of route selection and real-time path optimization for rescuers. Combining vegetation attributes of meta cells with geographic elevation information, we develop a simulation and fire fighting exercise system that computing the resultant data in real time and converting it into renderable resource, which is directly used by the OSG engines. With the help of the same data structure and the corresponding key algorithms and technologies, …

Hierarchical Guided Enhanced Multi-Objective Firefly Algorithm, Jia Zhao, Zhizhen Lai, Runxiu Wu, Zhihua Cui, Hui Wang

Journal of System Simulation

Abstract: The multi-objective firefly algorithm is easy to produce oscillation and aggregation phenomenon in the solution process, which leads to weak development ability and poor solution accuracy. This paper proposes a hierarchical guided enhanced multi-objective firefly algorithm (HGEMOFA). HGEMOFA builds a hierarchical guidance model, uses non-dominated sorting to obtain different levels of individuals. The individuals in the dominant layer are used to guide the evolution of the individuals in the inferior layer, the guidance direction is clear, the oscillation in the evolution process is solved, the aggregation phenomenon is reduced, and the convergence of the algorithm is enhanced. The Lévy …

Research On Path Planning Of Warehouse Robot With Improved Harris Hawks Algorithm, Xu Lei, Jingyi Chen, Xiaoyang Chen

Journal of System Simulation

Abstract: To improve the path planning efficiency of warehouse mobile robots in static environments, and to solve the problems of slow convergence and local optimum of traditional Harris Hawk (HHO) algorithm in path planning, a Harris Hawk optimization algorithm based on Tent chaotic mapping fused with Cauchy's back-learning variant (TCLHHO) is proposed. The population diversity is increased by Tent Chaotic mapping to speed up convergence. An exponential prey escape energy updating strategy is proposed to balance the global search and local exploitation capabilities of the algorithm. The optimal individual is disturbed by Cauchy mutation operator and inverse learning strategy to …

Image Self-Enhancement De-Hazing Algorithm Combined With Generative Adversarial Network, Wanjun Liu, Yuqian Cheng, Haicheng Qu

Journal of System Simulation

Abstract: To solve the problem that existing dehazing models are prone to over fitting after training with synthetic hazy image data sets, an image self-enhancement dehazing algorithm is proposed in combination with generative adversarial network. The depth information of an image is estimated while combining two Generative Adversarial Networks. The first GAN uses a clear image to learn the process of image hazing, and then adopts the hazed image generated by it as the input of the second GAN to guide the second GAN to correct dehazing. In order to reduce the difference before and after image processing, the consistency …

Cooperative And Optimal Control Of Multiple Mimo Objects Under Information Sharing, Jiong Shao, Xinchun Jie, Meng Wu

Journal of System Simulation

Abstract: Aiming at the problems of low cooperative efficiency and slow convergence of control algorithm for multiple MIMO objects in cyber-physical system (CPS), a cooperative optimization control strategy for multiple MIMO objects under the condition of information sharing is proposed. A new network control system structure with only physical layer and information layer is used to realize real-time sharing of state variables, control and detection information of multiple MIMO objects. Under the condition of information sharing, based on the performance indexes assigned by CPS and the physical constraints between each object, the cooperative controller designed by minimum principle realizes the …

Research On Collaborative Optimization Method Of Multi-Uav Task Allocation And Path Planning, Peng Xiao, Feng Xie, Haihong Ni, Min Zhang, Zhili Tang, Ni Li

Journal of System Simulation

Abstract: Aiming at the task requirements of multi-UAV to perform multi-target collaborative reconnaissance, a collaborative optimization method of multi-machine and multi-objective task allocation and path planning is proposed. Based on the partheno genetic algorithms (PGA), a cost function combined with the actual path cost is constructed through the Dubins curve. To further reduce the calculation cost, a clustering algorithm based on UAV detection distance is proposed, and the generated clustering point is used as a new waypoint of UAV. The simulation results show that considering the dangerous area and the large number of reconnaissance points, the algorithm can effectively complete …

Tri-Training Algorithm Based On Density Peaks Clustering, Yuhang Luo, Runxiu Wu, Zhihua Cui, Yiying Zhang, Yeshen He, Jia Zhao

Journal of System Simulation

Abstract: Tri-training can effectively improve the generalization ability of classifiers by using unlabeled data for classification, but it is prone to mislabeling unlabeled data, thus forming training noise. Tritraining (Tri-training with density peaks clustering, DPC-TT) algorithm based on density peaks clustering is proposed. The DPC-TT algorithm uses the density peaks clustering algorithm to obtain the class cluster centers and local densities of the training data, and the samples within the truncation distance of the class cluster centers are identified as the samples with better spatial structure, and these samples are labeled as the core data, and the classifier is updated …