Open Access. Powered by Scholars. Published by Universities.®
Operations Research, Systems Engineering and Industrial Engineering Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Physical Sciences and Mathematics (290)
- Computer Sciences (268)
- Computer Engineering (248)
- Artificial Intelligence and Robotics (240)
- Systems Science (231)
-
- Numerical Analysis and Scientific Computing (224)
- Industrial Engineering (151)
- Operational Research (89)
- Industrial Technology (76)
- Chemical Engineering (73)
- Electrical and Computer Engineering (73)
- Process Control and Systems (63)
- Controls and Control Theory (53)
- Systems Engineering (48)
- Complex Fluids (47)
- Social and Behavioral Sciences (47)
- Mechanical Engineering (42)
- Business (32)
- Other Operations Research, Systems Engineering and Industrial Engineering (32)
- Public Affairs, Public Policy and Public Administration (24)
- Manufacturing (23)
- Civil and Environmental Engineering (21)
- Aerospace Engineering (19)
- Medicine and Health Sciences (18)
- Ergonomics (14)
- Theory and Algorithms (13)
- Computational Engineering (12)
- Transportation (12)
- Institution
-
- China Simulation Federation (223)
- Air Force Institute of Technology (58)
- Tashkent State Technical University (52)
- Chulalongkorn University (29)
- Singapore Management University (24)
-
- Old Dominion University (19)
- Missouri University of Science and Technology (17)
- University of Arkansas, Fayetteville (13)
- University of Dar es Salaam (13)
- West Virginia University (13)
- University of Central Florida (11)
- Mississippi State University (10)
- University of Texas Rio Grande Valley (10)
- University of Texas at Arlington (9)
- Clemson University (8)
- East Texas A&M University (8)
- Embry-Riddle Aeronautical University (8)
- Kennesaw State University (8)
- Florida Institute of Technology (6)
- University of Texas at El Paso (6)
- California Polytechnic State University, San Luis Obispo (5)
- California State University, San Bernardino (5)
- Institut de Recherche Robert-Sauvé en santé et en sécurité du travail (5)
- Louisiana State University (4)
- University of Louisville (4)
- University of South Florida (4)
- Walden University (4)
- Faculty of Engineering, Mansoura University (3)
- Georgia Southern University (3)
- The University of Akron (3)
- Keyword
-
- Machine learning (13)
- Reinforcement learning (12)
- Deep reinforcement learning (11)
- Digital twin (10)
- Additive manufacturing (8)
-
- Deep learning (8)
- Optimization (8)
- Industry 4.0 (7)
- Path planning (7)
- Sustainability (7)
- Attention mechanism (6)
- Machine Learning (6)
- Modeling (6)
- Multi-objective optimization (6)
- Resilience (6)
- Simulation (6)
- Automation (5)
- Vehicle routing problem (5)
- Virtual reality (5)
- Algorithm (4)
- Artificial intelligence (4)
- Artificial potential field (4)
- Cloud computing (4)
- Collaboration (4)
- Game theory (4)
- Modeling and simulation (4)
- Multi-agent (4)
- Supply Chain (4)
- UAV (4)
- Approximate dynamic programming (3)
- Publication
-
- Journal of System Simulation (223)
- Theses and Dissertations (69)
- Chemical Technology, Control and Management (52)
- Chulalongkorn University Theses and Dissertations (Chula ETD) (29)
- Research Collection School Of Computing and Information Systems (23)
-
- Faculty Publications (18)
- Engineering Management and Systems Engineering Faculty Research & Creative Works (13)
- Graduate Theses, Dissertations, and Problem Reports (ETD) (13)
- Tanzania Journal of Engineering and Technology (TJET) (13)
- Electronic Theses and Dissertations, 2020-2023 (9)
- Manufacturing & Industrial Engineering Faculty Publications (9)
- Engineering Management & Systems Engineering Faculty Publications (6)
- Industrial Engineering Undergraduate Honors Theses (6)
- Industrial, Manufacturing, and Systems Engineering Dissertations - Archive (6)
- Open Access Theses & Dissertations (6)
- Electronic Theses and Dissertations (5)
- Graduate Theses and Dissertations (5)
- Journal of International Technology and Information Management (5)
- All Dissertations (4)
- All Theses (4)
- Doctoral Dissertations and Master's Theses (4)
- Senior Design Project For Engineers (4)
- USF Tampa Graduate Theses and Dissertations (4)
- Walden Dissertations and Doctoral Studies (4)
- Engineering Management & Systems Engineering Theses & Dissertations (3)
- Engineering Technology Faculty Publications (3)
- Journal of Materials Exploration and Findings (3)
- Mansoura Engineering Journal (3)
- Rapports de recherche scientifique (3)
- Symposium of Student Scholars (3)
- Publication Type
- File Type
Articles 601 - 630 of 643
Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering
การตัดสินใจหลายเกณฑ์แบบไฮบริดเพื่อหาคู่ค้าพันธมิตรเชิงกลยุทธ์ในอุตสาหกรรมสารกึ่งตัวนำ, จิรยุ พุดพวง
การตัดสินใจหลายเกณฑ์แบบไฮบริดเพื่อหาคู่ค้าพันธมิตรเชิงกลยุทธ์ในอุตสาหกรรมสารกึ่งตัวนำ, จิรยุ พุดพวง
Chulalongkorn University Theses and Dissertations (Chula ETD)
วิทยานิพนธ์นี้นำเสนอแนวทางในการคัดเลือกคู่ค้าเชิงกลยุทธ์ในอุตสาหกรรมสารกึ่งตัวนำ โดยใช้วิธีการผสมผสานระหว่างตรรกศาสตร์คลุมเครือ กระบวนการลำดับชั้นเชิงวิเคราะห์ (F-AHP) และวิธีการจัดลำดับความสำคัญโดยพิจารณาจากความคล้ายคลึงกันในอุดมคติ (F-TOPSIS) เพื่อจัดการกับความกำกวมและความไม่แน่นอนในการตัดสินใจของมนุษย์ กระบวนการไฮบริดนี้ประกอบด้วยหลายขั้นตอนหลัก ได้แก่ การศึกษาขั้นตอนการตัดสินใจและการคัดเลือกเกณฑ์จากวรรณกรรมและผู้เชี่ยวชาญ การวิเคราะห์ข้อมูลการจัดซื้อ การประเมินความสำคัญของเกณฑ์โดยใช้ F-AHP และการจัดอันดับทางเลือกโดยใช้ F-TOPSIS พร้อมทั้งการวิเคราะห์ความไว (Sensitivity Analysis) ของเกณฑ์ต่าง ๆ เพื่อประเมินความเสถียรของผลลัพธ์ ผลการศึกษาจากกรณีศึกษาพบว่าวิธีการนี้สามารถลดการสูญเสียรายได้อย่างมีนัยสำคัญ ประมาณ 3.2 ล้านดอลลาร์ และช่วยลดความเสี่ยงในการเลือกคู่ค้าที่ไม่เหมาะสม ซึ่งอาจส่งผลต่อประสิทธิภาพการดำเนินงานและความสามารถในการแข่งขันในตลาด นอกจากนี้ยังส่งผลให้มีการประหยัดต้นทุน เพิ่มความพึงพอใจของลูกค้า และปรับปรุงประสิทธิภาพในการส่งมอบสินค้าและคุณภาพของผลิตภัณฑ์ได้อย่างดีเยี่ยม อีกทั้งยังมีการพัฒนาระบบสนับสนุนการตัดสินใจที่สามารถปรับเปลี่ยนและนำไปใช้ในอุตสาหกรรมอื่นๆ ที่มีลักษณะการตัดสินใจที่ซับซ้อนเช่นเดียวกัน
Battery Sales Forecasting Using Traditional Forecasting And Machine Learning Techniques, Santi Wongkamphu
Battery Sales Forecasting Using Traditional Forecasting And Machine Learning Techniques, Santi Wongkamphu
Chulalongkorn University Theses and Dissertations (Chula ETD)
Battery sales forecasting is crucial for demand planning in the automotive battery industry. This objective of this study is to identify traditional forecasting methods and machine learning techniques to predict monthly sales for a case-study battery manufacturer in Thailand. The monthly sales data of the 10-best-selling products are from January 2018 to December 2023. Traditional forecasting models considered in this research are Holt’s Linear Trend, Holt-Winters Seasonal, Autoregressive Integrated Moving Average (ARIMA), Seasonal ARIMA (SARIMA) and SARIMA with Exogenous Variables (SARIMAX). The machine learning approaches are Long Short-Term Memory (LSTM) and Artificial Neural Networks (ANN). Hybrid models integrating both traditional …
การปรับปรุงกระบวนการบริหารจัดการวัตถุดิบตั้งต้นสำหรับโรงงานปิโตรเคมีขั้นปลาย, อิทธิชัย เสือเหลือง
การปรับปรุงกระบวนการบริหารจัดการวัตถุดิบตั้งต้นสำหรับโรงงานปิโตรเคมีขั้นปลาย, อิทธิชัย เสือเหลือง
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีวัตถุประสงค์เพื่อปรับปรุงกระบวนการบริหารจัดการวัตถุดิบคงคลังของวัตถุดิบตั้งต้นของโรงงานปิโตรเคมีขั้นปลาย ในระยะเริ่มดำเนินกิจการ จากการวิเคราะห์หาสาเหตุของปัญหาด้วยเทคนิคทำไม - ทำไม พบว่ากระบวนการปัจจุบันขาดการวางแผนและขาดการประสานงานสำหรับการจัดซื้อวัตถุดิบตั้งต้นอย่างมีประสิทธิภาพทำให้เกิดผลกระทบที่ตามมาคือ 1) วัตถุดิบตั้งต้นไม่เพียงพอต่อการผลิต 2) เมื่อมีรถแท็งก์ติดตรึงมาส่งวัตถุดิบแต่ไม่สามารถรับวัตถุดิบเข้าถังเก็บได้ การดำเนินงานวิจัยนี้ใช้หลักการปรับรื้อกระบวนการทางธุรกิจร่วมกับการเข้าไปศึกษาแนวปฏิบัติที่ดีขององค์กรอื่นสององค์กรที่อยู่ในกลุ่มอุตสาหกรรมปิโตรเคมีขั้นปลายซึ่งเป็นกลุ่มอุตสาหกรรมเดียวกัน ในด้านนโยบายการจัดการวัตถุดิบคงคลัง กระบวนการวางแผนสั่งซื้อวัตถุดิบและการประสานงาน โดยมีขั้นตอนในการดำเนินงานวิจัยเริ่มจาก 1) ระบุกระบวนการปัจจุบัน 2) วิเคราะห์กระบวนการปัจจุบัน 3) ออกแบบกระบวนการใหม่ และ 4) ทดสอบกระบวนการทำงานใหม่และนำไปใช้งาน จากการดำเนินงานมีส่วนสำคัญที่เปลี่ยนแปลงไปจากกระบวนการเดิม คือมีการปรับเปลี่ยนหน้าที่รับผิดชอบของพนักงานวางแผนการผลิต การกำหนดให้มีการประชุมร่วมกันระหว่างพนักงานวางแผนการผลิตกับส่วนผลิตและส่วนบำรุงรักษา และการพัฒนาตารางและเชื่อมโยงสูตรในไฟล์เอ็กซ์เซลเพื่อใช้ในการจำลองสถานการณ์สำหรับการวางแผนสั่งซื้อวัตถุดิบโดยกำหนดนโยบายการสั่งซื้อและจัดเก็บภายใต้ข้อจำกัดของโรงงานอย่างเหมาะสมร่วมกับการใช้ข้อมูลระดับวัตถุดิบคงคลังจากระบบการจัดการข้อมูลโรงงาน ผลการดำเนินงานวิจัยแสดงให้เห็นว่าสามารถลดจำนวนครั้งโดยเฉลี่ยต่อเดือนที่วัตถุดิบตั้งต้นไม่เพียงพอต่อการผลิตจาก 0.78 ครั้งต่อเดือนเป็น 0 ครั้งต่อเดือน และลดจำนวนครั้งโดยเฉลี่ยต่อเดือนที่ไม่สามารถรับวัตถุดิบตั้งต้นจากรถแท็งก์ติดตรึงเข้าถังเก็บได้จาก 0.44 ครั้งต่อเดือนเป็น 0 ครั้งต่อเดือนเช่นกัน
การพยากรณ์อัตราเงินเฟ้อทั่วไปของประเทศไทยด้วยปัจจัยอัตราเงินเฟ้อของประเทศคู่ค้าโดยใช้วิธีการเรียนรู้เชิงลึก, เตชินท์ อานนท์วัฒนา
การพยากรณ์อัตราเงินเฟ้อทั่วไปของประเทศไทยด้วยปัจจัยอัตราเงินเฟ้อของประเทศคู่ค้าโดยใช้วิธีการเรียนรู้เชิงลึก, เตชินท์ อานนท์วัฒนา
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มุ่งเน้นไปที่การปรับปรุงความแม่นยำของการพยากรณ์เงินเฟ้อทั่วไปในประเทศไทย โดยการประเมินประสิทธิภาพของแบบจำลองการเรียนรู้เชิงลึก แบบจำลองอนุกรมเวลา และแบบจำลองแบบผสมในช่วงการพยากรณ์ล่วงหน้า 1, 3, 6 และ 12 เดือน รวมถึงมีการประเมินประสิทธิภาพของการเพิ่มตัวแปรอัตราเงินเฟ้อของประเทศคู่ค้าในแบบจำลอง โดยจะมีการวิเคราะห์เปรียบเทียบแบบจำลองต่าง ๆ ได้แก่ ANN, RNN, LSTM, VAR, Hybrid Model (VAR-ANN) และ BOTMM ของธนาคารแห่งประเทศไทย งานวิจัยนี้มีวัตถุประสงค์เพื่อหาแบบจำลองที่มีประสิทธิภาพในการพยากรณ์สูงที่สุด และแสดงให้เห็นถึงการเพิ่มตัวแปรอัตราเงินเฟ้อของประเทศคู่ค้าที่มีต่อความแม่นยำในการพยากรณ์ โดยผลลัพธ์แสดงให้เห็นว่าแบบจำลองแบบผสม Hybrid (VAR-ANN) มีประสิทธิภาพเหนือกว่าแบบจำลองอื่น ๆ ในทุกช่วงการพยากรณ์ล่วงหน้า ซึ่งแสดงให้เห็นถึงความสามารถในการจับแนวโน้มอัตราเงินเฟ้อ นอกจากนี้ผลลัพธ์จากการเพิ่มตัวแปรอัตราเงินเฟ้อของประเทศคู่ค้าช่วยเพิ่มความแม่นยำในการพยากรณ์อย่างมาก ผลลัพธ์เหล่านี้เป็นประโยชน์สำหรับผู้กำหนดนโยบายและผู้ปฏิบัติงานที่เกี่ยวกับการพยากรณ์เงินเฟ้อ และแสดงให้เห็นถึงข้อได้เปรียบในเชิงปฏิบัติของแบบจำลองแบบผสมในการเพิ่มความแม่นยำในการพยากรณ์สำหรับตัวชี้วัดทางเศรษฐกิจของประเทศไทย
การออกแบบระบบแชทบอทร่วมกับปัญญาประดิษฐ์ช่วยวินิจฉัยการแพ้ยา, ปกรณ์ เสงี่ยมรัตน์
การออกแบบระบบแชทบอทร่วมกับปัญญาประดิษฐ์ช่วยวินิจฉัยการแพ้ยา, ปกรณ์ เสงี่ยมรัตน์
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มุ่งเน้นการศึกษาและพัฒนาระบบปัญญาประดิษฐ์เพื่อช่วยวินิจฉัยอาการแพ้ยา โดยใช้ระบบแชทบอทปัญญาประดิษฐ์ที่มีการประมวลผลภาษาธรรมชาติ (NLP) และเทคนิคการจำแนกประเภทข้อมูลภาพ ในการวิจัยและพัฒนาแบบจำลองการจำแนกข้อมูลภาพเพื่อการตรวจหาอาการแพ้ยา นักพัฒนาเลือกใช้แบบจำลอง InceptionV3 และแบบจำลอง MobileNetV2 ซึ่งเป็นโครงข่ายประสาทเทียมแบบคอนโวลูชัน ผลการศึกษาชี้ให้เห็นว่าแบบจำลอง MobileNetV2 มีประสิทธิภาพดีกว่าแบบจำลอง InceptionV3 โดยมีความแม่นยำสุดท้ายที่ 99.29% อีกทั้งขนาดของแบบจำลอง MobileNetV2 มีขนาดเล็กทำให้เหมาะสำหรับการใช้งานบนสมาร์ทโฟนและยังพบว่าการจำแนกผื่นแพ้ยาสามารถทำได้อย่างมีประสิทธิภาพ และเมื่อนำแบบจำลองไปมาใช้ในแชทบอทที่พัฒนา พบว่าแบบจำลองที่มีค่า Kappa 0.76 มีความเห็นพ้องที่ดีระหว่างการทำนายและค่าจริง ส่วนการทดสอบการพัฒนาและการใช้งานของแชทบอทประสบให้ผลลัพธ์ที่เป็นบวก แชทบอทสามารถตอบสนองสถานการณ์ที่อาสาสมัครทดสอบได้ 100% และมีคะแนน System Usability Scale (SUS) ที่ยอมรับได้ที่ 70.1 ด้วยการพัฒนานี้ทำให้ผู้ป่วยที่มีอาการแพ้ยาชนิดไม่รุนแรง ไม่จำเป็นต้องเดินทางไปโรงพยาบาล ระบบแชทบอทสามารถช่วยเหลือเบื้องต้นในการวิเคราะห์อาการแพ้ยา ข้อมูลชนิดการแพ้ยา ข้อมูลบริการคลินิก และให้คำแนะนำเพื่อลดอาการไม่พึงประสงค์ ซึ่งยังช่วยลดเวลาเดินทางและค่าใช้จ่ายที่เกี่ยวข้องกับการไปโรงพยาบาล นอกจากนี้ระบบแชทบอทที่ได้พัฒนาขึ้นมานี้ยังสามารถเป็นต้นแบบเพื่อสนับสนุนความก้าวหน้าของเทคโนโลยีการแพทย์ในอนาคตและการรองรับเข้าสู่ยุคปัญญาประดิษฐ์
การออกแบบการวางแผนและควบคุมการเตรียมสินค้าเพื่อขายสำหรับแฟรนไชส์ประเภทซุ้มขายอาหาร, พัชรินทร์ โจมกุ่ย
การออกแบบการวางแผนและควบคุมการเตรียมสินค้าเพื่อขายสำหรับแฟรนไชส์ประเภทซุ้มขายอาหาร, พัชรินทร์ โจมกุ่ย
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้ได้ออกแบบการวางแผนและควบคุมการเตรียมสินค้าเพื่อขายให้กับร้านแฟรนไชส์ประเภทซุ้มขายอาหารที่มีพนักงานทำงานหนึ่งคน ดำเนินงานทุกอย่างภายในร้าน มีสินค้าขายทั้งหมด 16 รายการ แบ่งออกได้เป็น 3 ประเภท คือ นึ่ง ย่างและทอด โดยจะมีเตาประเภทละ 1 เครื่อง เนื่องจากการทำงานในร้านกรณีศึกษานี้ยังไม่มีประสิทธิภาพ เกิดสินค้าปรุงสุกไม่เพียงพอและสินค้าเหลือท้ายวันทำให้เป็นมูลค่าความสูญเสีย เมื่อคิดคำนวณแล้วพบว่ามีมูลค่าความเสียหาย 31.5% เมื่อเทียบกับมูลค่ากำไร ซึ่งเป็นมูลค่าที่สูงหากปัญหานี้ไม่ได้รับการแก้ไข ปัจจุบันร้านกรณีศึกษานี้ไม่มีการบันทึกข้อมูลการขายสินค้า ไม่มีการเรียงลำดับการปรุงสุกสินค้า ผู้ปฏิบัติงานดำเนินการปรุงสุกและคาดเดาปริมาณการขายสินค้าตามประสบการณ์ส่วนตัว ผู้วิจัยจึงได้สนใจแก้ปัญหาโดยการเก็บข้อมูลและวิเคราะห์ข้อมูลความต้องการสินค้าและเงื่อนไขการผลิต เพื่อออกแบบวิธีการวางแผนการเตรียมสินค้าเพื่อขายซึ่งประกอบด้วย 1) การออกแบบตารางการลำดับการผลิตสินค้าล็อตแรก และ 2) การกำหนดนโนบายในการควบคุมการเตรียมสินค้าเพื่อขาย รวมถึงออกแบบโปรแกรมการจัดการสินค้าคงคลังและการแจ้งเตือนเพื่อสั่งผลิตด้วย Microsoft Excel ผลการศึกษาพบว่าการผลิตสินค้าล็อตแรกสามารถลดเวลาลงจากเดิมได้ประมาณ 34.21% และนโยบายการการควบคุมการเตรียมสินค้าเพื่อขายสามารถลดปริมาณสินค้าเหลือและสินค้าขาดมือระหว่างวันเฉลี่ยต่อวันได้ทุกรายการซึ่งมูลค่าความเสียหายลดลงเหลือ 8.66% เมื่อเทียบกับมูลค่ากำไรซึ่งทำให้สามารถเพิ่มมูลค่ากำไรได้ 8.66 %
วิธีการฮิวริสติกส์แบบหลายวัตถุประสงค์สำหรับปัญหาการเก็บเกี่ยวถั่วลันเตา, พูนสิริ วสุพงศ์พิพัฒน์
วิธีการฮิวริสติกส์แบบหลายวัตถุประสงค์สำหรับปัญหาการเก็บเกี่ยวถั่วลันเตา, พูนสิริ วสุพงศ์พิพัฒน์
Chulalongkorn University Theses and Dissertations (Chula ETD)
ทรัพยากรทางการเกษตรเป็นหนึ่งในทรัพยากรหลักที่สำคัญ ที่จำเป็นต้องมีการวางแผนการใช้งานอย่างมีประสิทธิภาพ โดยส่งผลกระทบเชิงลบต่อสิ่งแวดล้อมน้อยที่สุดเท่าที่เป็นไปได้ ด้วยเหตุดังกล่าว ผู้วิจัยจึงได้เลือกศึกษาปัญหาการวางแผนการจัดตารางการเก็บเกี่ยว โดยใช้ถั่วลันเตาเป็นกรณีศึกษา เพื่อให้บรรลุวัตถุประสงค์ข้างต้น ผู้วิจัยได้ทำการศึกษาหาปัจจัยและข้อจำกัดต่าง ๆ ที่เกี่ยวข้องกับกระบวนการการเก็บเกี่ยวถั่วลันเตาในเครือข่ายที่มีโรงแช่แข็งถั่วลันเตา และกลุ่มเกษตรกรที่ทำสัญญาซื้อขายถั่วลันเตากับโรงแช่แข็งถั่วลันเตาล่วงหน้า โดยโรงแช่แข็งถั่วลันเตาจะเป็นผู้รับผิดชอบในการจัดการการเก็บเกี่ยวทั้งหมด จากข้อกำหนดต่าง ๆ ที่รวบรวมมา ผู้วิจัยได้สร้างแบบจำลองทางคณิตศาสตร์แบบหลายวัตถุประสงค์ และออกแบบวิธีการทางฮิวริสติกส์แบบการหาค่าเหมาะสมที่สุดด้วยการเคลื่อนที่ของกลุ่มอนุภาค (Particle Swarm Optimization: PSO) เพื่อแก้ไขปัญหาดังกล่าว โดยมุ่งเน้นไปที่วัตถุประสงค์ที่แตกต่างกัน 3วัตถุประสงค์ คือ 1. การลดต้นทุนที่ใช้ในการขนส่งถั่วลันเตา 2. การลดปริมาณการปล่อยก๊าซคาร์บอนไดออกไซด์ออกสู่สิ่งแวดล้อม และ 3. การกระจายการเก็บเกี่ยวให้เกษตรกรได้รับการเก็บเกี่ยวอย่างเท่าเทียมกัน ผู้วิจัยได้ทำการทดสอบประสิทธิภาพของวิธีการทั้ง 2 ผ่านปัญหาจำลองขนาดเล็ก ขนาดกลาง และขนาดใหญ่ โดยผู้วิจัยพบว่า วิธีการฮิวริสติกส์ที่พัฒนาขึ้นมีประสิทธิภาพค่อนข้างดี โดยวิธีการดังกล่าวสามารถหาผลเฉลยของปัญหาแบบวัตถุประสงค์เดี่ยวที่มีคุณภาพเทียบเท่ากับวิธีการแม่นตรงผ่านโปรแกรม CPLEX นอกจากนี้ วิธีการฮิวริสติกส์ที่พัฒนาขึ้นยังสามารถประยุกต์ใช้กับปัญหาที่มีขนาดใหญ่ขึ้น ในขณะที่วิธีการแบบแม่นตรงไม่สามารถให้คำตอบได้ เนื่องจากปัญหาด้านความจำของเครื่องคอมพิวเตอร์
Aircraft Arrival Delay Prediction Using Machine Learning Method, Patara Charnvanichborikarn
Aircraft Arrival Delay Prediction Using Machine Learning Method, Patara Charnvanichborikarn
Chulalongkorn University Theses and Dissertations (Chula ETD)
Flight delays pose a significant challenge to the growth and efficiency of the US airline industry, which is a central focus of our thesis that extends to the broader global airline sector. This study aims to predict aircraft arrival delays utilizing machine learning models. In addressing the substantial challenge of aircraft delays within the US airline industry, our research relied on Kaggle datasets. Following comprehensive data reorganization and cleanup processes, a crucial aspect of our approach involved integrating weather data from the arrival airport at the time of arrival into the model, thereby enhancing our dataset to bolster predictive accuracy. …
A Diversity-Enhanced Memetic Algorithm For Solving Electric Vehicle Routing Problems With Time Windows And Mixed Backhauls, Jianhua Xiao, Jingguo Du, Zhiguang Cao, Xingyi Zhang, Yunyun Niu
A Diversity-Enhanced Memetic Algorithm For Solving Electric Vehicle Routing Problems With Time Windows And Mixed Backhauls, Jianhua Xiao, Jingguo Du, Zhiguang Cao, Xingyi Zhang, Yunyun Niu
Research Collection School Of Computing and Information Systems
The electric vehicle routing problem (EVRP) has been studied increasingly because of environmental concerns. However, existing studies on the EVRP mainly focus on time windows and sole linehaul customers, which might not be practical as backhaul customers are also ubiquitous in reality. In this study, we investigate an EVRP with time windows and mixed backhauls (EVRPTWMB), where both linehaul and backhaul customers exist and can be served in any order. To address this challenging problem, we propose a diversity-enhanced memetic algorithm (DEMA) that integrates three types of novel operators, including genetic operators based on adaptive selection mechanism, a selection operator …
Coordinating Multi-Party Vehicle Routing With Location Congestion Via Iterative Best Response, Waldy Joe, Hoong Chuin Lau
Coordinating Multi-Party Vehicle Routing With Location Congestion Via Iterative Best Response, Waldy Joe, Hoong Chuin Lau
Research Collection School Of Computing and Information Systems
This work is motivated by a real-world problem of coordinating B2B pickup-delivery operations to shopping malls involving multiple non-collaborative logistics service providers (LSPs) in a congested city where space is scarce. This problem can be categorized as a vehicle routing problem with pickup and delivery, time windows and location congestion with multiple LSPs (or ML-VRPLC in short), and we propose a scalable, decentralized, coordinated planning approach via iterative best response. We formulate the problem as a strategic game where each LSP is a self-interested agent but is willing to participate in a coordinated planning as long as there are sufficient …
Pressure Induced By Roll-Down Foam-Earplugs On Earcanal, Ahmed Dalaq, Luiz Melo, Franck Sgard, Olivier Doutres, Éric Wagnac
Pressure Induced By Roll-Down Foam-Earplugs On Earcanal, Ahmed Dalaq, Luiz Melo, Franck Sgard, Olivier Doutres, Éric Wagnac
Études primaires
Physical discomfort of earplug is a common complaint, so much so it jeopardizes the health and safety of workers, resulting in frequent noncompliance to proper wearing of earplugs. A pressing need thus arises to understand the underlying mechanics for the interaction of earplugs with earcanal walls. An idealized cylindrical geometry of earcanal is first treated with computational and analytical modeling to predict the pressure induced by roll-down cylindrical PVC foam earplugs. In order to predict representative pressure values and distribution, we estimated the hyperelastic properties of foam-based earplugs and characterized their behavior using a stent testing machine (J-CrimpTM machine) …
Component Maintenance Strategies And Risk Analysis For Random Shock Effects Considering Maintenance Costs, Chao Zhang, Yadong Zhang, Hongyan Dui, Shaoping Wang, Mileta Tomovic
Component Maintenance Strategies And Risk Analysis For Random Shock Effects Considering Maintenance Costs, Chao Zhang, Yadong Zhang, Hongyan Dui, Shaoping Wang, Mileta Tomovic
Engineering Technology Faculty Publications
Maintenance can improve a system’s reliability in a long operation period or when a component has failed. The reliability modeling method that uses the stochastic process degradation model to describe the system degradation process has been widely used. However, the existing reliability models established using stochastic processes only consider the internal degradation process, and do not fully consider the impact of external random shocks on their reliability modeling. Furthermore, the existing theory of importance does not consider the actual factors of maintenance cost. In this paper, based on the reliability modeling of random processes, the degradation rate under the influence …
Strategies Aircraft Manufacturing Organizational Leaders Use For Proper Material Pricing, Chin Kuei Jen
Strategies Aircraft Manufacturing Organizational Leaders Use For Proper Material Pricing, Chin Kuei Jen
Walden Dissertations and Doctoral Studies
The lack of proper material pricing strategies can challenge manufacturers’ profitability and growth. Aircraft manufacturing leaders are concerned because understanding and developing material pricing strategies are essential to increasing profitability. Grounded in price theory, the purpose of this qualitative single case study was to explore strategies aircraft manufacturing organizational leaders use for proper material pricing estimates. The participants were four aircraft manufacturing organizational leaders from a successful aircraft manufacturing business located in the state of Georgia. Data were gathered from semistructured interviews and document reviews and analyzed using Yin’s five step approach. The four themes that emerged were the impact …
A Machine Learning Approach For Early Diagnosis Of Transthyretin Amyloid Cardiomyopathy Among Heart Failure Patients, Tanjim Ahmed
A Machine Learning Approach For Early Diagnosis Of Transthyretin Amyloid Cardiomyopathy Among Heart Failure Patients, Tanjim Ahmed
Graduate Theses, Dissertations, and Problem Reports (ETD)
Transthyretin Amyloid Cardiomyopathy (ATTR-CM) is a rare, progressive, and fatal disease. Prevalence of ATTR-CM ranges from 4 to 17 per 100000 cases where the mean survival time is less than 4 years. It has a history of being underdiagnosed and misdiagnosed. The diagnosis delay has a weighted mean of 6.1 years for wild-type ATTR-CM. Low awareness, the necessity of invasive procedures, and lack of treatment are the key reasons for delayed diagnosis. But, with the introduction of non-invasive tests like nuclear scintigraphy with 99mTC-PYP and the disease modifying drug Tafamidis, the diagnosis delay signifies a missed opportunity to increase …
Framework For Data Acquisition And Fusion Of Camera And Radar For Autonomous Vehicle Systems, Clay Edward Vincent
Framework For Data Acquisition And Fusion Of Camera And Radar For Autonomous Vehicle Systems, Clay Edward Vincent
Graduate Theses, Dissertations, and Problem Reports (ETD)
The primary contribution is the development of the data collection testing methodology for autonomous driving systems of a hybrid electric passenger vehicle. As automotive manufacturers begin to develop adaptive cruise control technology in vehicles, progress is being made toward the development of fully-autonomous vehicles. Adaptive cruise control capability is classified into five levels defined by the Society of Automotive Engineering. Some vehicles under development have attained higher levels of autonomy, but the focus of most commercial development is Level 2 autonomy. As the level of autonomy increases, the sensor technology becomes more advanced with a sensor suite which includes radar, …
Improving The Health And Safety Of Manufacturing Workers By Detecting And Addressing Personal Protective Equipment (Ppe) Violations In Real-Time With The Use Of Automated Ppe Detection Technology, Joseph Olufemi Fasinu
Improving The Health And Safety Of Manufacturing Workers By Detecting And Addressing Personal Protective Equipment (Ppe) Violations In Real-Time With The Use Of Automated Ppe Detection Technology, Joseph Olufemi Fasinu
Graduate Theses, Dissertations, and Problem Reports (ETD)
The Centers for Disease Control and Prevention (CDC) emphasized that Personal Protective Equipment (PPE) can significantly reduce the risk of occupational injuries and illnesses. However, improper use, failure to use, and other PPE-related violations can still result in injuries and fatalities. Eye and face protection violation has been one of the top 10 most frequently violated OSHA standards in fiscal years 2018, 2019, 2020, 2021 and 2022 consecutively. A common practice among safety professionals to ensure PPE compliance has been to physically inspect or monitor PPE usage among workers, which has been found to be unsustainable on a continuous real-time …
Spatio-Temporal Deep Learning Approaches For Addressing Track Association Problem Using Automatic Identification System (Ais) Data, Md Asif Bin Syed
Spatio-Temporal Deep Learning Approaches For Addressing Track Association Problem Using Automatic Identification System (Ais) Data, Md Asif Bin Syed
Graduate Theses, Dissertations, and Problem Reports (ETD)
In the realm of marine surveillance, track association constitutes a pivotal yet challenging task, involving the identification and tracking of unlabelled vessel trajectories. The need for accurate data association algorithms stems from the urge to spot unusual vessel movements or threat detection. These algorithms link sequential observations containing location and motion information to specific moving objects, helping to build their real-time trajectories. These threat detection algorithms will be useful when a vessel attempts to conceal its identity. The algorithm can then identify and track the specific vessel from its incoming signal. The data for this study is sourced from the …
Physics Infused Lstm Network For Track Association Based On Marine Vessel Automatic Identification System Data, Tasmiah Haque
Physics Infused Lstm Network For Track Association Based On Marine Vessel Automatic Identification System Data, Tasmiah Haque
Graduate Theses, Dissertations, and Problem Reports (ETD)
In marine surveillance, a crucial task is distinguishing between normal and abnormal vessel movements to timely identify potential threats. Subsequently, the vessels need to be monitored and tracked until necessary action can be taken. To achieve this, a track association problem is formulated where multiple vessels' unlabeled geographic and motion parameters are associated with their true labels. These parameters are typically obtained from the Automatic Identification System (AIS) database, which enables real-time tracking of marine vessels equipped with AIS. The parameters are time-stamped and collected over a long period, and therefore, modeling the inherent temporal patterns in the data is …
Machine Learning Prediction Of Dod Personal Property Shipment Costs, Tiffany Tucker, Torrey J. Wagner, Paul Auclair, Brent T. Langhals
Machine Learning Prediction Of Dod Personal Property Shipment Costs, Tiffany Tucker, Torrey J. Wagner, Paul Auclair, Brent T. Langhals
Faculty Publications
U.S. Department of Defense (DoD) personal property moves account for 15% of all domestic and international moves - accurate prediction of their cost could draw attention to outlier shipments and improve budget planning. In this work 136,140 shipments between 13 personal property shipment hubs from April 2022 through March 2023 with a total cost of $1.6B were analyzed. Shipment cost was predicted using recursive feature elimination on linear regression and XGBoost algorithms, as well as through neural network hyperparameter sweeps. Modeling was repeated after removing 28 features related to shipment hub location and branch of service to examine their influence …
Energy Digital Twins In Smart Manufacturing Systems, Anna Billey
Energy Digital Twins In Smart Manufacturing Systems, Anna Billey
Graduate Theses, Dissertations, and Problem Reports (ETD)
In this thesis, an Energy Digital Twin for smart manufacturing systems was developed and evaluated. In particular, the study focused on bidirectional parameter communication between the physical and the virtual part with the aim of optimizing the energy used in the manufacturing process. Rising costs and the environmental impacts related to energy consumption have grown in importance worldwide. There are elevated concerns in sectors like manufacturing, leading to an urgent quest to reduce energy consumption. A recent advancement in Industry 4.0 technology, the Digital Twin, represents a promising smart technology and tool that researchers are investigating to help reduce energy …
การลดของเสียในกระบวนการผลิตชิ้นส่วนไมโครเวฟของโรงงานกรณีศึกษา, เวยาวัจ เกาเทียน
การลดของเสียในกระบวนการผลิตชิ้นส่วนไมโครเวฟของโรงงานกรณีศึกษา, เวยาวัจ เกาเทียน
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีจุดประสงค์เพื่อลดของเสียที่เกิดจากขั้นตอนการยึดติดชิ้นงานสองชิ้นเข้าด้วยกันบริเวณเวฟไกด์ในกระบวนการผลิตโครงสร้างหลักของไมโครเวฟที่ต้องมีช่องว่างไม่เกิน 0.2 มิลลิเมตร โดยนำเทคนิคซิกซ์ ซิกมาเข้ามาประยุกต์ใช้ในการแก้ไขปัญหา โดยการดำเนินงานวิจัยเริ่มจากการตั้งคณะทำงานเพื่อศึกษาสภาพปัญหา และกระบวนการในการผลิตผลิตภัณฑ์ไมโครเวฟ จากนั้นทำการวิเคราะห์หาสาเหตุของปัญหาและปัจจัยที่เกี่ยวข้องด้วยแผนภาพแสดงสาเหตุและผล (Cause and Effect Diagram) พร้อมทั้งคัดกรองปัจจัยโดยการประเมินตัวเลขแสดงความเสี่ยง (RPN : Risk Priority Number) จากการวิเคราะห์ลักษณะข้อบกพร่องและผลกระทบ (FMEA : Failure Mode and Effect Analysis) หลังจากนั้นเมื่อคัดกรองปัจจัยที่เกี่ยวข้องที่ทำให้เกิดของเสียในกระบวนการผลิตแล้ว โดยประกอบด้วย 5 ปัจจัยได้แก่ (1)ความสูงติดตั้งพั๊นซ์ในชุดดาย(2) ความหนาของแผ่นเหล็ก (3) กระบวนการผลิตของผู้ผลิตไม่ได้มาตรฐาน (4) พนักงานไม่มีการฝึกอบรมก่อนปฏิบัติงาน และ(5) ไม่มีการใช้ฟิกเจอร์ในการล็อคชิ้นงาน โดยปัจจัยที่ (4)และ(5) ได้ทำการปรับปรุงแล้วเสร็จก่อนการออกแบบการทดลอง จากนั้นจึงนำปัจจัย (1)-(3) มาทำการประยุกต์โดยใช้การออกแบบการทดลองเชิงแฟคทอเรียล พบว่ามีปัจจัยจำนวน 2 ปัจจัยที่มีผลต่อค่าช่องว่างอย่างมีนัยสำคัญ คือ การปรับตั้งค่าความสูงติดตั้งพั๊นซ์ในชุดดายโดยตั้งค่าที่ระยะความสูง 35 มิลลิเมตร และค่าความหนาแผ่นเหล็กที่ใช้ในการผลิตที่ 0.4 มิลลิเมตร หลังจากนำค่ามาปรับใช้ในกระบวนการ พบว่าเปอร์เซ็นต์ของเสียที่เกิดขึ้นมีจำนวนลดลงจากเดิม โดยก่อนการปรับปรุงยอดของเสียเท่ากับ 70.37 เปอร์เซ็นต์และหลังปรับปรุงพบยอดของเสียที่ตรวจติดตามลดลงเหลือเท่ากับ 17.78 เปอร์เซ็นต์
Virtual Reality Of Labless Foundry And Heat Treatment For Next Industrial Training, Naris Lawankowit
Virtual Reality Of Labless Foundry And Heat Treatment For Next Industrial Training, Naris Lawankowit
Chulalongkorn University Theses and Dissertations (Chula ETD)
This study presents an innovative Virtual Reality (VR) application tailored to educate users on Foundry and Heat Treatment operations. Its primary objectives encompass the creation of a secure and lifelike learning environment while ensuring accessibility. The development process was a meticulous fusion of technology, incorporating the Unity engine, 3D modeling, and seamless Salesforce integration, all grounded in extensive research. The VR application's structure strategically subdivides these industrial processes into four stations: Molding, Furnace, Workbench, and Heat Treatment. This detailed approach empowers users to engage directly in these operations, making it a valuable educational tool. The study's significance extends to the …
การศึกษาคุณลักษณะทางพื้นที่และเวลาของฝุ่น Pm 2.5 ในกรุงเทพมหานคร, กิตติยาภรณ์ ศิวิชัย
การศึกษาคุณลักษณะทางพื้นที่และเวลาของฝุ่น Pm 2.5 ในกรุงเทพมหานคร, กิตติยาภรณ์ ศิวิชัย
Chulalongkorn University Theses and Dissertations (Chula ETD)
ปัญหามลพิษทางอากาศ เป็นปัญหาที่ไม่ก่อให้เกิดอาการอย่างฉับพลันทันที แต่ทำลายสุขภาพของมนุษย์เมื่อเวลาผ่านไปอย่างช้า ๆ แม้ปัญหาของฝุ่น PM 2.5 นั้นรุนแรงจนก่อให้เกิดความตระหนักของประชาชน สถานการณ์ฝุ่น PM 2.5 ในประเทศไทยยังคงย่ำแย่อย่างต่อเนื่อง และสามารถเห็นได้ด้วยตาเปล่าว่าฝุ่น PM 2.5 ปกคลุมจนทำให้ทัศนวิสัยในการมองเห็นต่ำลง เนื่องจากฝุ่นนั้นกระจายตัวแตกต่างกันในแต่ละพื้นที่ และแต่ละเวลา ผู้วิจัยจึงทำการศึกษาคุณลักษณะทางพื้นที่และเวลาของฝุ่น PM 2.5 ผ่านเทนเซอร์และการแยกองค์ประกอบเทนเซอร์ ด้วยวิธี Tucker decomposition จนได้รูปแบบของฝุ่นในแต่ละเขตและเวลา ผู้วิจัยพบว่า รูปแบบความเข้มข้นของฝุ่น PM 2.5 นั้นมีความสัมพันธ์กับแนวทางการใช้ชีวิตของคนกรุงเทพมหานคร ปัจจัยทางอุตุนิยมวิทยา พฤติกรรมของประชาชนทั้งก่อนและหลังการระบาดของโรคโควิด-19 การจราจร การก่อสร้าง และสถานที่สำคัญในเขตต่าง ๆ ของกรุงเทพมหานคร ผลลัพธ์ดังกล่าวบ่งชี้ว่า เราควรพิจารณาการกระจายจุดที่มีความหนาแน่นของประชากร การพัฒนาระบบขนส่งสาธารณะ เพื่อลดความเข้มข้นของฝุ่น PM 2.5 โดยเฉพาะอย่างยิ่งในฤดูหนาว และในเขตต่าง ๆ ที่มีความเข้มข้นสูง
A Box-Behnken Design For Copper Recovery From E-Waste Pyrolysis Char By An Electrolysis Process, Chanut Thamcharoen
A Box-Behnken Design For Copper Recovery From E-Waste Pyrolysis Char By An Electrolysis Process, Chanut Thamcharoen
Chulalongkorn University Theses and Dissertations (Chula ETD)
This study presents the solvent extraction process for recovering copper from pyrolysis char derived from printed circuit boards (PCBs). To maximize copper yield, a response surface design based on the Box-Behnken design for the solvent extraction of PCBs char is proposed. Three process parameters of the extraction process were chosen as variable factors which are HCl concentration (2, 3, and 4 M), pulp density (50, 75, and 100 g/L) and reaction time (1, 2, and 3 h). The results from Analysis of Variance (ANOVA), R-squared (R2), and Adjusted R2 (R2adj) demonstrate the obtained regression model’s significance. The response surface method …
An Analysis Of Retail Promotion Effectiveness Using Agent-Based Modeling, Chutima Binsiravanich
An Analysis Of Retail Promotion Effectiveness Using Agent-Based Modeling, Chutima Binsiravanich
Chulalongkorn University Theses and Dissertations (Chula ETD)
In modern metropolitan environments, retailers engage in intense competition to attract consumers and increase profits. It is critical to develop an effective price promotion plan. However, the complexity of customer preferences and many product qualities in retail, especially for competitive products, makes it challenging to create effective promotional methods. This study proposes an agent-based simulation to represent the outcomes of strategic retail tactics where real-world testing for all strategies is not practical. In the simulation model, advertising efficacy and word-of-mouth influence drive consumer decisions, with subsequent judgments based on store price reductions. Twelve different promotion strategies (including different price reduction, …
การพัฒนาระบบการจัดการซ่อมบำรุงรักษาสำหรับโรงงานผลิตเครื่องสำอาง, ญานิกา ทากุดเรือ
การพัฒนาระบบการจัดการซ่อมบำรุงรักษาสำหรับโรงงานผลิตเครื่องสำอาง, ญานิกา ทากุดเรือ
Chulalongkorn University Theses and Dissertations (Chula ETD)
งานวิจัยนี้มีวัตถุประสงค์เพื่อพัฒนาโปรแกรมสำหรับการซ่อมบำรุงรักษาเครื่องจักรของโรงงานผลิตเครื่องสำอาง การศึกษาพบว่าเมื่อเครื่องจักรมีเหตุชำรุดจากการชำรุดกะทันหันต้องใช้เวลาในการซ่อมบำรุงรักษานาน ส่งผลกระทบต่อกระบวนการผลิตที่ต้องหยุดชะงัก จากการศึกษาข้อมูลเกี่ยวกับสภาพงานบำรุงรักษา การวิเคราะห์การไหลของข้อมูลในงานบำรุงรักษา รวมทั้งปรับปรุงกระบวนการไหลของข้อมูลเพื่อลดความซ้ำซ้อน ลดขั้นตอนการปฏิบัติงาน จึงได้มีการนำระบบจัดการงานบำรุงรักษาด้วยคอมพิวเตอร์เข้ามาเพื่อพัฒนาระบบบริหารงานบำรุงรักษา เพื่อรวบรวม จัดเก็บ และบริหารจัดการงาน โดยวางแผนการบำรุงรักษาเชิงป้องกันจากการหาค่าระยะเวลาเฉลี่ยระหว่างการเกิดเหตุขัดข้อง (MTBF) และค่าระยะเวลาเฉลี่ยในการซ่อมบำรุง (MTTR) ในการวางแผนการเปลี่ยนอะไหล่ก่อนการเกิดเหตุขัดข้อง เพื่อให้เครื่องจักรมีความพร้อมสำหรับการใช้งานอยู่เสมอ ผลการวิจัยพบว่าเมื่อนำระบบการจัดการซ่อมบำรุงไปติดตั้ง อัตราความพร้อมในการทำงานของเครื่องจักร (Availability Rate) เพิ่มขึ้น 8.59% จาก 88.89% เป็น 97.48% ระยะเวลาเฉลี่ยระหว่างการเกิดเหตุขัดข้อง (MTBF) เพิ่มขึ้นขั้นต่ำ 42.04% จาก 88 วัน เป็นมากกว่า 125 วัน และระยะเวลาเฉลี่ยในการซ่อมบำรุง (MTTR) มีแนวโน้มลดลงค่าที่ลดลง
การพยากรณ์ราคาเศษเหล็กในประเทศไทยโดยใช้ตัวแบบผสมการแยกองค์ประกอบ, ทรรศมล วงศ์จิตสุขเกษม
การพยากรณ์ราคาเศษเหล็กในประเทศไทยโดยใช้ตัวแบบผสมการแยกองค์ประกอบ, ทรรศมล วงศ์จิตสุขเกษม
Chulalongkorn University Theses and Dissertations (Chula ETD)
เศษเหล็กคือวัสดุที่เกิดจากการหมุนเวียนชิ้นส่วนเหล็กที่ถูกคัดทิ้งให้กลับเข้าสู่อุตสาหกรรมผลิตเหล็กอีกครั้ง ถือเป็นวัตถุดิบหลักของกระบวนการหล่อหลอมเหล็ก และราคาเศษเหล็กที่เปลี่ยนแปลงไปจะส่งผลให้ต้นทุนการผลิตเหล็กเปลี่ยนแปลงตาม การพยากรณ์ราคาเศษเหล็กที่มีความแม่นยำจะส่งผลดีต่อการจัดสรรงบประมาณเพื่อจัดซื้อวัตถุดิบ งานวิจัยนี้จึงสนใจศึกษาการพัฒนาตัวแบบเพื่อใช้ในการพยากรณ์ราคาเศษเหล็กในประเทศไทยโดยใช้ตัวแบบผสมการแยกองค์ประกอบ ซึ่งเกิดจากการปรับปรุงความแม่นยำของตัวแบบที่สร้างจากการใช้เทคนิคการเรียนรู้ของเครื่องร่วมกับวิธีการแยกองค์ประกอบของข้อมูล โดยวิธีการทางสถิติและเทคนิคการเรียนรู้ของเครื่องที่ศึกษา ได้แก่ SARIMA, Linear regression, Support vector regression, XGBoost, ANN และ LSTM จากการศึกษาพบว่าตัวแบบ SARIMA และ LSTM สามารถพยากรณ์ได้แม่นยำที่สุด แต่ตัวแบบ SARIMA ใช้เวลาน้อยกว่ามาก รองลงมาคือ ANN, Support vector regression, Linear regression และ XGBoost โดยตัวแบบ SARIMA มีความคลาดเคลื่อนในการพยากรณ์จากค่า MAPE ที่ 2.96% ส่วนวิธีการแยกองค์ประกอบของข้อมูลที่ศึกษา ได้แก่ EMD, CEEMDAN และ VMD จากการศึกษาพบว่าการแยกองค์ประกอบของข้อมูลโดยใช้ VMD สามารถเพิ่มความแม่นยำในการพยากรณ์ให้แก่เทคนิคการเรียนรู้ของเครื่องในการสร้างตัวแบบได้มากที่สุด รองลงมาคือ EMD และ CEEMDAN ตามลำดับ โดยที่เทคนิคการเรียนรู้ของเครื่องที่ใช้วิธีการแยกองค์ประกอบและให้ความแม่นยำมากที่สุดคือ Linear Regression ซึ่งตัวแบบผสมการแยกองค์ประกอบที่มีความแม่นยำมากที่สุดคือ VMD-LR มีความคลาดเคลื่อนในการพยากรณ์ MAPE ที่ 1.18%
Bitcoin Algorithmic Trading Using Rsi And Stoch Technical Indicators, Pattrapon Chucheepchuenkamon
Bitcoin Algorithmic Trading Using Rsi And Stoch Technical Indicators, Pattrapon Chucheepchuenkamon
Chulalongkorn University Theses and Dissertations (Chula ETD)
Algorithmic trading helps traders automate their trading decisions using computer programs. One widely used approach is to employ technical indicators such as the Relative Strength Index (RSI) and the Stochastic Oscillator (Stoch) to identify overbought and oversold conditions in the market. This paper studies various strategies using RSI and Stoch indicators, i.e., buying in an oversold market and selling in an overbought market, and analyzes their impact on changing market conditions, such as bullish, bearish, and sideways markets. Specifically, the paper proposes comparing five trading strategies: RSI-only strategy, Stoch-only strategy, RSI-and-Stoch strategy, RSI-or-Stoch strategy and buy-and-hold strategy and finding their …
การออกแบบฮิวริสติกเพื่อการจัดตารางการทำงานของนักประดิษฐ์ตาเทียมในการผลิตตาเทียมเฉพาะบุคคล, รชา เลิศศักดิ์วานิช
การออกแบบฮิวริสติกเพื่อการจัดตารางการทำงานของนักประดิษฐ์ตาเทียมในการผลิตตาเทียมเฉพาะบุคคล, รชา เลิศศักดิ์วานิช
Chulalongkorn University Theses and Dissertations (Chula ETD)
ตาเทียมเฉพาะบุคคลเป็นอุปกรณ์ทดแทนดวงตาที่ช่วยเสริมสร้างความมั่นใจของผู้ป่วยที่สูญเสียดวงตา โดยประดิษฐ์ขึ้นให้เหมาะสมกับตาข้างที่เหลืออยู่ของผู้ป่วย ทำให้ต้องออกแบบเฉพาะบุคคล และใช้ผู้เชี่ยวชาญในการประดิษฐ์ ทำให้การวางแผนการทำงานและการจัดตารางการทำงานเป็นไปได้ยาก ต้องเผื่อเวลาการนัดหมายผู้ป่วย ซึ่งอาจเกิดผลเสียกับผู้ป่วย ดังนั้นจึงต้องการให้เวลาเสร็จงานของการประดิษฐ์ตาเทียมและความล่าช้าน้อยที่สุด นอกจากนี้กระบวนการประดิษฐ์ยังมีความซับซ้อนและหลายขั้นตอน ทำให้ต้องพิจารณาทักษะการทำงานในการมอบหมายงานและจัดลำดับของงานประดิษฐ์ เพื่อลดเวลาสูญเปล่าจากการรอคอยในกระบวนการต้ม ผู้วิจัยได้นำเสนอแบบจำลองทางคณิตศาสตร์และออกแบบขั้นตอนวิธีฮิวริสติกสำหรับการมอบหมายงานและจัดตารางการประดิษฐ์ตาเทียมเฉพาะบุคคล เพื่อให้มีเวลาเสร็จงานและเวลาล่าช้าน้อยที่สุด โดยได้นำเสนอวิธีเชิงพันธุกรรม ซึ่งเป็นวิธีที่สามารถประยุกต์ใช้กับปัญหาได้หลากหลาย รวมถึงสามารถพัฒนาเพื่อให้คำตอบที่ได้เป็นคำตอบที่ดีที่สุด ซึ่งในงานวิจัยนี้ได้เปรียบเทียบผลลัพธ์จากการใช้วิธีคัดเลือก วิธีสลับสมาชิก และวิธีกลายพันธุ์ที่แตกต่างกัน เพื่อให้ได้ขั้นตอนวิธีที่เหมาะสมมากที่สุด และใช้ขั้นตอนวิธีดังกล่าวในการทดสอบปัจจัยต่าง ๆ ผลจากการทดลองพบว่าวิธีเชิงพันธุกรรมใช้เวลาประมวลผลเพียง 34 วินาที ซึ่งน้อยกว่าแบบจำลองคณิตศาสตร์ถึง 98% รวมถึงให้ผลลัพธ์ของตารางการประดิษฐ์ตาเทียมที่ดี โดยมีการทำกระบวนการอื่นในระหว่างการรอต้มทุกครั้งเพื่อลดเวลารอคอยของนักประดิษฐ์ตาเทียม และผลจากการทดสอบปัจจัยพบว่าผลลัพธ์ที่ได้จากกรณีที่พิจารณาเวลานัดหมายสามารถครอบคลุมประเด็นต่าง ๆ ได้มากกว่าการไม่พิจารณาเวลานัดหมาย และในการศึกษาความสำคัญของวัตถุประสงค์พบว่าควรจะให้ความสำคัญกับวัตถุประสงค์ที่ใกล้เคียงกัน เพื่อให้ได้ผลลัพธ์ที่เหมาะสมมากที่สุด ทั้งมุมมองด้านเวลาและความสมดุลของการมอบหมายงาน
Systematic Analysis Of Covid-19 Consequences: Health, Economic, And Tourism Aspects, Kumpol Saengtabtim
Systematic Analysis Of Covid-19 Consequences: Health, Economic, And Tourism Aspects, Kumpol Saengtabtim
Chulalongkorn University Theses and Dissertations (Chula ETD)
In 2020, our world faced the impact of the COVID-19 situation, which caused a lot of harm and consequences in multiple aspects. Many organizations and sectors were affected a lot by the pandemic. This research performed a holistic analysis to extract the lessons learned based on health, economic, and tourism consequences. Both qualitative and quantitative methodologies were used to extract the best approach to prepare for the next pandemic. For the health aspect, the stepwise regression was used to extract the potential IHR States Parties Self-Assessment Annual Report (SPAR) health capacity provided by the World Health Organization (WHO) to deal …