Operations Research, Systems Engineering and Industrial Engineering Commons^™

Engineering Cyber Physical Systems: Preface, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

Multi-faceted systems of the future will entail complex logic with many levels of reasoning in intricate arrangement. The organization of these systems involves a web of connections and demonstrates self-driven adaptability. They are designed for autonomy and may exhibit emergent behavior that can be visualized.

Complex Adaptive Systems have dynamically changing meta-architectures. Finding an optimal architecture for these systems is a multi-criteria decision making problem often involving many objectives in the order of 20 or more. This creates "Pareto Breakdown" which prevents ordinary multi-objective optimization approaches from effectively searching for an optimal solution; saturating the decision maker with large sets …

Establishing Rules For Self-Organizing Systems-Of-Systems, David M. Curry, Cihan H. Dagli

Engineering Management and Systems Engineering Faculty Research & Creative Works

Self-organizing systems-of-systems offer the possibility of autonomously adapting to new circumstances and tasking. This could significantly benefit large endeavors such as smart cities and national defense by increasing the probability that new situations are expediently handled. Complex self-organizing behaviors can be produced by a large set of individual agents all following the same simple set of rules. While biological rule sets have application in achieving human goals, other rules sets may be necessary as these goals are not necessarily mirrored in nature. To this end, a set of system, rather than biologically, inspired rules is introduced and an agent-based model …

Rethinking The Design Of Low-Cost Point-Of-Care Diagnostic Devices, Faith W. Kimani, Samuel M. Mwangi, Benjamin J. Kwasa, Abdi M. Kusow, Benjamin K. Ngugi, Jiahao Chen, Xinyu Liu, Rebecca Cademartiri, Martin M. Thuo

Engineering Management and Systems Engineering Faculty Research & Creative Works

Reducing the global diseases burden requires effective diagnosis and treatment. In the developing world, accurate diagnosis can be the most expensive and time-consuming aspect of health care. Healthcare cost can, however, be reduced by use of affordable rapid diagnostic tests (RDTs). In the developed world, low-cost RDTs are being developed in many research laboratories; however, they are not being equally adopted in the developing countries. This disconnect points to a gap in the design philosophy, where parameterization of design variables ignores the most critical component of the system, the point-of-use stakeholders (e.g., doctors, nurses and patients). Herein, we demonstrated that …

Instance Selection Using Genetic Algorithms For An Intelligent Ensemble Trading System, Youngmin Kim, David Lee Enke

Engineering Management and Systems Engineering Faculty Research & Creative Works

Instance selection is a way to remove unnecessary data that can adversely affect the prediction model, thereby selecting representative and relevant data from the original data set that is expected to improve predictive performance. Instance selection plays an important role in improving the scalability of data mining algorithms and has also proven to be successful over a wide range of classification problems. However, instance selection using an evolutionary approach, as proposed in this study, is different from previous methods that have focused on improving accuracy performance in the stock market (i.e., Up or Down forecast). In fact, we propose a …

Identification Of Reverse Engineering Candidates Utilizing Machine Learning And Aircraft Cannibalization Data, Marc Banghart

International Journal of Aviation, Aeronautics, and Aerospace

As military aircraft continue to remain in service and age, cannibalization of parts is increasing. Proactive identification of parts that are at high risk for cannibalization will inform engineering processes such as reverse engineering, thus allowing potentially reducing lead time to develop new parts. The research objective was to develop a causal structure that can be used for prediction of when cannibalization actions may occur. Bayesian networks allow encoding of causality between various descriptive features given a data set. The method utilized a tabu search algorithm, identified the underlying causal structure and the associated node probabilities. The method is then …

Utilizing Functional Near-Infrared Spectroscopy For Prediction Of Cognitive Workload In Noisy Work Environments, Ryan Gabbard, Mary E. Fendley, Irfaan A. Dar, Rik Warren, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Occupational noise frequently occurs in the work environment in military intelligence, surveillance, and reconnaissance operations. This impacts cognitive performance by acting as a stressor, potentially interfering with the analysts’ decision-making process. We investigated the effects of different noise stimuli on analysts’ performance and workload in anomaly detection by simulating a noisy work environment. We utilized functional near-infrared spectroscopy (fNIRS) to quantify oxy-hemoglobin (HbO) and deoxy-hemoglobin concentration changes in the prefrontal cortex (PFC), as well as behavioral measures, which include eye tracking, reaction time, and accuracy rate. We hypothesized that noisy environments would have a negative effect on the participant in …

Optimizing Student Workforce Scheduling At Psu Office Of Information Technology (Oit), Agam Ebramsyah, Aishwarya Joy, Cody Miller, Jake Stevens, Priyanka Patil

Engineering and Technology Management Student Projects

A significant challenge for businesses of any size, is generating a work schedule that ensures adequate personnel coverage to ensure all aspects of the business are properly staffed, while preventing waste produced from having an excess number of employees working at a given time. The decision to manually create spreadsheets and work schedules that take into account availability, staffing requirements, and cost efficiency can become overwhelming and labor intensive. For Portland State University's Office of Information Technology (OIT), there is a significant challenge in scheduling student workers, while ensuring staffing requirements are met, student work hour restrictions are observed, and …

Time Series Classification Using Deep Learning For Process Planning: A Case From The Process Industry, Nijat Mehdiyev, Johannes Lahann, Andreas Emrich, David Lee Enke, Peter Fettke, Peter Loos

Engineering Management and Systems Engineering Faculty Research & Creative Works

Multivariate time series classification has been broadly applied in diverse domains over the past few decades. However, before applying the classification algorithms, the vast majority of current studies extract hand-engineered features that are assumed to detect local patterns in the time series. Therefore, the efficiency and precision of these classification approaches are heavily dependent on the quality of variables defined by domain experts. Recent improvements in the deep learning domain offer opportunities to avoid such an intensive hand-crafted feature engineering which is particularly important for managing the processes based on time-series data obtained from various sensor networks. In our paper, …

Process Management And Design Layout Of High Throughput Screening, Anthony Vasquez, Kyle Dupuy

Industrial and Manufacturing Engineering

Calibr is a pharmaceutical company in San Diego and growing very quickly rate and need help redesigning their lab layout and in doing so reducing their cycle times and down times in machines. In addition to this, they do not currently have an accurate measurement of how long their processes take in an overall cycle. The objective of this project is to provide Calibr with a redesigned layout to accommodate new equipment as well as a software tool that can output Gantt charts for their planning of their testing. Our approach to this project first included mapping out the facilities …

Implementation Of A Multi-Criteria Decision Analysis (Mcda) Toolkit To Aid In Ranking Naval Mission Vessel Combinations With Uncertainty, Andrew R. Miller

Engineering Management & Systems Engineering Theses & Dissertations

United States (U.S.) military bases have largely been constructed outside of the contiguous United States (OCONUS) due to the need of close support logistics for conflicts and wars. In contrast, military bases within the contiguous United States (CONUS) have been constructed mostly due to economic and other related monetary factors. In addition to monetary concerns for the placement of military bases (specifically naval bases), there exists tactical, environmental, cultural, climate, logistical, and geographical issues that need to be fully considered before deciding on a naval installation location and the vessels to be stationed there. I will present a new toolkit …

Understanding The Determinants Affecting The Continuance Intention To Use Cloud Computing, Shailja Tripathi Dr.

Journal of International Technology and Information Management

Cloud computing has been progressively implemented in the organizations. The purpose of the paper is to understand the fundamental factors influencing the senior manager’s continuance intention to use cloud computing in organizations. A conceptual framework was developed by using the Technology Acceptance Model (TAM) as a base theoretical model. A questionnaire was used to collect the data from several companies in IT, manufacturing, finance, pharmaceutical and retail sectors in India. The data analysis was done using structural equation modeling technique. Perceived usefulness and perceived ubiquity are identified as important factors that affect continuance intention to use cloud computing. In addition, …

Table Of Contents Jitim Vol 26 Issue 3, 2017

Journal of International Technology and Information Management

Table of Contents

Combinatorial Auction For Transportation Matching Service: Formulation And Adaptive Large Neighborhood Search Heuristic, Baoxiang Li, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

This paper considers the problem of matching multiple shippers and multi-transporters for pickups and drop-offs, where the goal is to select a subset of group jobs (shipper bids) that maximizes profit. This is the underlying winner determination problem in an online auction-based vehicle sharing platform that matches transportation demand and supply, particularly in a B2B last-mile setting. Each shipper bid contains multiple jobs, and each job has a weight, volume, pickup location, delivery location and time window. On the other hand, each transporter bid specifies the vehicle capacity, available time periods, and a cost structure. This double-sided auction will be …

Emergency Diesel-Electric Generator Set Maintenance And Test Periodicity, Stephen John Fehr

Engineering Management & Systems Engineering Theses & Dissertations

Manufacturer and industry recommendations vary considerably for maintenance and tests of emergency diesel-electric generator sets in emergency standby duty. There is little consistency among generator sets of similar technology, and manufacturers and their representatives often provide contradictory guidance. As a result, periodicity of emergency diesel-electric generator set maintenance and tests varies considerably in practice. Utilizing the framework proposed and tested by Fehr (2014), this research developed a parametric regression survival model of the reliability of modern diesel-electric generator sets in emergency standby duty as a function of maintenance, age, and cumulative run hours. A survival regression technique leveraging Cox’s (1972) …

Evaluating Process Improvement Courses Of Action Through Modeling And Simulation, Joseph R. Owens

Theses and Dissertations

Quantifying an expected improvement when considering moderate-complexity changes to a process is time consuming and has potential to overlook stochastic effects. By modeling a process as a Numerical Design Structure Matrix (NDSM), simulating the proposed changes, and evaluating performance, quantification can be rapidly accomplished to understand stochastic effects. This thesis explores a method to evaluate complex process changes within Six Sigma DMAIC process improvement to identify the most desirable outcome amongst several improvement options. A tool to perform the modeling and evaluation is developed. This process evaluation tool is verified for functionality, then is demonstrated against generic processes, a case …

Effect Of Fused Filament Fabrication Process Parameters On The Mechanical Properties Of Carbon Fiber Reinforced Polymers, Abdulrahman S. Alwabel

Theses and Dissertations

Carbon fiber reinforced polymer manufactured using additive manufacturing process is relatively a new process. The ability to predict the mechanical properties of these parts with high confidence will spread the use of these high-strength materials in more applications. The purpose of this research was to determine the effect of the build time between successive layers, arrangement of fiber and nylon layers, fiber start location, and the use of support material on the mechanical properties CFRP produced by additive manufacturing process using the MarkForged (MarkOne) 3D printer. A design of experiment (DOE) we preformed to develop a mathematical model describing the …

Revealing Casual Pathways To Sustainable Water Service Delivering Using Fsqca, Kate E. Gasparro, Jeffrey P. Walters

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This study aimed to build on theory and practice regarding the combinations of conditions that influence water service sustainability when external partners are involved. The study investigates 26 well projects that have been implemented in developing countries with the assistance of Engineers Without Borders-USA (EWB-USA). Using past literature on sustainable water service delivery in developing communities, emergent coding techniques with project documents, and surveys with EWB-USA team members, this study identifies a set of project conditions to conduct fuzzy-set Qualitative Comparative Analysis (fsQCA). Findings show that the presence of a water committee cannot alone account for project sustainability. Additional conditions, …

Impulse, Matt Schmidt, Lora Berg, Christine Delfanian, Dave Graves, Heidi Kronaizl, Emily Weber, Micayla Standish

Impulse (Jerome J. Lohr College of Engineering Publication)

[Page] 2 Better Equipped
[Page] 4 Flashback Summer Scholars
[Page] 6 Biomedical Engineering
Ryan Mahutga is the third mechanical engineering graduate in five years to receive a prestigious National Science Foundation Graduate Research Fellowship.
Nigerian native John Asiruwa is working with associate professor Stephen Gent on a mechanical engineering project to help Sanford Health build better heart stents.
Electrical engineering graduate Bruce Lutz has selected the biomedical engineering program as a target for his future giving.
[Page] 9 Programs Accredited
[Page] 10 Fast Wheels
[Page] 12 Five Unforgettable Weeks
[Page] 14 Second in the Nation
[Page] 16 Athletes and Engineering …

A Systems-Based Framework For Design And Analysis Of An R And D Structure, Polinpapilinho F. Katina, Charles B. Keating, Luna M. Magpili

Engineering Management & Systems Engineering Faculty Publications

A critical challenge for managerial effectiveness and competitive advantage in research and development (R and D) organizations is developing an appropriate structural configuration. However, in finding an appropriate structural configuration, R and D managers are faced with unprecedented levels of uncertainty, ambiguity, and accelerating complexity, coupled with demands for increased productivity. This paper develops a systems-based framework to support rigorous design, analysis, and transformation of the structure for R and D organizations. The framework development includes: (1) a review of the literature for the nature and role of the structure in R and D management; (2) setting of the R …

Loading Time Flexibility In Cross-Docking Systems, Dincer Konur, Mihalis M. Golias

Engineering Management and Systems Engineering Faculty Research & Creative Works

In this study, we investigate truck-to-door assignment problem for loading outgoing trucks in a cross-docking system with flexible handling times. Specifically, a truck's loading time depends on the number of workers assigned to the outbound door, where the truck is being loaded. An optimization problem is formulated to jointly determine the number of workers and the trucks to be loaded at each door. The resulting problem is a nonlinear integer programming model. Due to the complexity of this model, two evolutionary heuristic methods are proposed for solution. First heuristic method is based on truck assignments while the second heuristic is …

Evaluation Of A Scientifically Developed Anesthesiology Handoff Protocol, Kristen Lise Welsh Webster

Doctoral Dissertations and Master's Theses

Communication failures have been cited as the leading cause of avoidable adverse events in healthcare. Specifically, within handoffs, these communication failures can cause error in the transfer of patient information. A multitude of factors can affect the transmission of patient information between providers including transactive memory, power distance, and conversational noise; however, literature suggests that the use of handoff protocols assist in improving communication and efficiency during handoffs. Studies regarding handoffs have typically centered on the content or delivery of the information during the handoff. To date, none have targeted the underlying mechanisms of the communication and their effects on …

Development And Investigation Of An Air Transportation Operations Safety Climate Scale, Matthew D. Roberts

Theses and Dissertations

Safety is of critical importance in many industries, and the US Air Force is no exception. Since 2005, the US Air Force has experienced more than 119 on-duty air and ground fatalities as well as 520 off-duty ground fatalities. One of the more dangerous environments in the U.S. Air Force and the civilian industry is air transportation operations where the fatal injury rate is higher than the national average. However, peer-reviewed safety research focusing on air transportation operations is practically non-existent, both in the military and civilian context. Therefore, safety research that helps us better understand how to shape safety …

The Subject Librarian Newsletter, Engineering And Computer Science, Fall 2017, Buenaventura "Ven" Basco

Libraries' Newsletters

No abstract provided.

Macrodamage Accumulation Model For A Human Femur, Farah Hamandi, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

The objective of this study was to more fully understand the mechanical behavior of bone tissue that is important to find an alternative material to be used as an implant and to develop an accurate model to predict the fracture of the bone. Predicting and preventing bone failure is an important area in orthopaedics. In this paper, the macrodamage accumulation models in the bone tissue have been investigated. Phenomenological models for bone damage have been discussed in detail. In addition, 3D finite element model of the femur prepared from imaging data with both cortical and trabecular structures is delineated using …

Split-Merge Model Of Workunit Replication In Distributed Computing, Alexander Rumyantsev, Srinivas R. Chakravarthy

Industrial & Manufacturing Engineering Presentations And Conference Materials

No abstract provided.

Numerical Methods For Nonlinear Optimal Control Problems And Their Applications In Indoor Climate Control, Runxin He

McKelvey School of Engineering Graduate Student Theses & Dissertations

Efficiency, comfort, and convenience are three major aspects in the design of control systems for residential Heating, Ventilation, and Air Conditioning (HVAC) units. In this dissertation, we study optimization-based algorithms for HVAC control that minimizes energy consumption while maintaining a desired temperature, or even human comfort in a room. Our algorithm uses a Computer Fluid Dynamics (CFD) model, mathematically formulated using Partial Differential Equations (PDEs), to describe the interactions between temperature, pressure, and air flow. Our model allows us to naturally formulate problems such as controlling the temperature of a small region of interest within a room, or to control …

Forecasting Us Army Enlistment Contract Production In Complex Geographical Marketing Areas, Joshua L. Mcdonald, Edward D. White, Raymond R. Hill, Christian Pardo

Faculty Publications

Purpose: The purpose of this paper is to demonstrate an improved method for forecasting the US Army recruiting. Design/methodology/approach: Time series methods, regression modeling, principle components and marketing research are included in this paper. Findings: This paper found the unique ability of multiple statistical methods applied to a forecasting context to consider the effects of inputs that are controlled to some degree by a decision maker. Research limitations/implications: This work will successfully inform the US Army recruiting leadership on how this improved methodology will improve their recruitment process.
Practical implications: Improved US Army analytical technique for forecasting recruiting goals.

Adaptive Learning Pedagogy In Udl And Multi-Modal Training, Ziho Kang, Mattlyn R. Dragoo, Randa L. Shehab, Han Yuan, Lei Ding, Stephen G. West

National Training Aircraft Symposium (NTAS)

Currently, most learning methods are based on classroom teaching through unidirectional communication using boards or slides. However, the Universal Design for Learning (UDL) asserts that the students can increase their performance if the instructors can provide the students with diversified information representation, expression, and engagement means. Although UDL minimizes the mismatch between the teaching and learning styles, we lack the detailed methods to implement the UDL and its associated multi-modal training methods in the context of air traffic control candidates and/or technical operators. We propose an approach that adapts the Index of Learning Styles (ILS) based on four categories: perception, …

A Mixed Methods Study Of The Performance And Dynamics Of University Technology Transfer And Commercialization, Berk Dogan

LSU Master's Theses

The technology transfer and commercialization encompasses various activities involved in acquiring intellectual property rights for the inventions, marketing of the inventions, and diffusing into the public domain through commercialization. Although many scholars have studied technology transfer within the academic institutions' context, the process has been assumed to be sequential. The technology transfer process is a complex process to be generalized as a linear sequential process. A mixed methods approach has been used to triangulate the findings from the literature review and descriptive analyses to conceptualize an alternative model that reflects the actual process more accurately. It was found that the …

Determination Of Recovery Time For A Simple Lifting Task Based On Weight, Frequency, And Duration Of The Lift, Milad Amini

LSU Master's Theses

Musculoskeletal disorders (MSDs) are a leading cause of injury in American workplaces which cost the economy billions of dollars each year. Extensive research has shown that job fatigue is one of the causes of MSDs. Allocating frequent and adequate rest break is suggested to be an effective method in mitigating the work overload and fatigue prevention. The objective of this research was to determine rest periods for lifting tasks based on the activity heart rate and by using a set of task variables. Twenty-four university male students took part in this study. The two response variables were perceived level of …