Operations Research, Systems Engineering and Industrial Engineering Commons^™

Improving Quality Of Service In Ems Systems By Reducing Disparities Between Service Zones, Sunarin Chanta

All Dissertations

Emergency medical service (EMS) systems respond to emergency or urgent calls so as to provide immediate care, such as pre-hospital care and/or transportation, to hospitals. Care must be provided in a timely manner; in fact quality of service is usually directly associated with response time. To reduce the response time, the number and location of vehicles within the service area are important variables. However with limited capacity, increasing the number of vehicles is often an infeasible alternative. Therefore, a critical design goal is to decide at which facilities stations should be located in order to serve as much demand as …

Using Discrete Event Computer Simulation To Analyze The Effects Of Proposed Changes To Personnel In A Hospital Medical Laboratory, Gerardo Morales

Theses and Dissertations - UTB/UTPA

A discrete event computer simulation is used to model a portion of the medical laboratory at Doctors Hospital at Renaissance in order to assess the current situation as well as to review the planed personnel changes. The area under observation is the section in which the processor(s) receive, label and distribute the patient samples. There are four cases modeled in the simulation: The main focus is to determine if one or two processors are needed per shift and if the high level of phone calls poses a significant delay to the processors’ workflow. The simulation results indicate that having two …

Applying Inventory Control Practices Within The Sisters Of Mercy Health Care Supply Chain, Server Apras

Graduate Theses and Dissertations

This research lays a foundation for the better understanding of the application and acceptance of more advanced inventory control practices within the health care supply chain. The demand characteristics and optimal control policies for pharmaceutical items within a multi-echelon provider network are examined within the framework of a case study. Demand forecasting algorithms were applied to forecast demand for inventory control procedures. A spreadsheet-based inventory planning tool was used to minimize the inventory holding and ordering costs subject to fill rate constraints. The costs of inventory control models are compared to the current ordering and inventory control strategies to document …

Influence Of Process Parameters On Health Outcome, Vijaya K. Musunuru

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

In the recent years, healthcare organizations have realized that quality in providing service is critical for their survival in this competitive world. This increased attention to service quality has forced many health care providers to reevaluate their systems to stay in business. The main purpose of this study is to test the hypothesis “Process Quality predicts the Product quality (patient satisfaction) in the healthcare domain”. The objective of this study was three- fold. The first objective is to analyze historical data both on patient satisfaction and on provider attributes to yield process parameters for a particular area in a hospital. …

Evaluating The Capacity Of A Proton Therapy Facility, Ridvan Gedik

Graduate Theses and Dissertations

A relatively new consideration in proton therapy planning is the requirement that the mix of patients treated satisfy desired percentages. Since it is very dicult to satisfy an integer number of patients in light of these requirements, deviations from patient mix preferences and their impacts on operational capabilities are of particular interest to healthcare planners. Therefore, we propose a bicriteria mathematical programming model that determines an outpatient schedule maximizing the number of fractions and minimizing the deviations from the patient mix ratios over the planning horizon. The tradeos between the two objectives are identied through analysis of ecient frontiers. Our …

An Empirical Investigation Of Supply Chain Excellence In Healthcare, Brian Keith Smith

Graduate Theses and Dissertations

This research is motivated by opportunities to improve the cost and quality of healthcare delivery through improved supply chain processes. This research assesses the quality of the healthcare supply chain and identifies factors that are driving supply chain excellence among organizations in the healthcare industry. The first objective of this research is to assess the state of quality measurement in the healthcare supply chain. The achievement of this first objective is presented in Chapter 3 of this dissertation in the form of a manuscript accepted for publication in The Quality Management Journal. The second research objective is to develop …

Taxisim: A Multiagent Simulation Platform For Evaluating Taxi Fleet Operations, Shih-Fen Cheng, Thi Duong Nguyen

Research Collection School Of Computing and Information Systems

Taxi service is an important mode of public transportation in most metropolitan areas since it provides door-to-door convenience in the public domain. Unfortunately, despite all the convenience taxis bring, taxi fleets are also extremely inefficient to the point that over 50% of its operation time could be spent in idling state. Improving taxi fleet operation is an extremely challenging problem, not just because of its scale, but also due to fact that taxi drivers are self-interested agents that cannot be controlled centrally. To facilitate the study of such complex and decentralized system, we propose to construct a multiagent simulation platform …

Investigation Of Rfid Readability For License Plates In Static And Motion Testing, Srinivasan Venkatesan

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The most important function of RFID in vehicle tracking is to store information concerning tagged elements in order to improve the overall performance of movable asset management. There is a need to discover an RFID system for the tracking of vehicles, as existing vehicle tracking systems are undependable. Experiments were performed with SIRIT, SAVI, and RF code RFID systems under differing conditions, attaching the tag to the license plate instead of the windshield. Different spacers were also tested to reduce the effect of metal surfaces on RFID signals.

Preliminary experiments were performed before stationary and motion testing in order to …

Integration Of A Real Option Of An Environmental Project, Qi Yang

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

This thesis explores a problem of how to evaluate environmental projects under the Carbon Cap-and-Trade Scheme (CCTS) from the perspective of an individual firm. The focus is the integration of a real option approach for project investment timing and financial carbon option approach for carbon credit management. The real option is for a mid or long term decision on when to invest on the environmental project, and the financial option is for a supplementary decision to hedge short-term residue risks. Two uncertainties (the carbon price and carbon credit demand) are considered, and their changes are represented by a lattice of …

A Digital Hydraulic Valve, Actuated Using A Piezoelectric Linear Motor, Brian C. Bevill

Purdue Polytechnic Directed Projects

Proportional control in hydraulics is widely utilized. The most widely used current types of proportional valves utilize solenoid technology. While this technology has been around for decades and has been proven an effective means of control, there is always a demand for improved performance of advancing technologies. Integrating piezoelectric devices as a means to control hydraulic systems helps advance control for hydraulic systems.

Piezoelectric stack devices have been used to control hydraulic systems with success. Advantages of these stacks include being relatively small with a high power to weight ratio, using less energy than solenoid operations, and being fast acting. …

Acuta Enews July 2011, Vol 40, No. 7

ACUTA Newsletters

ln This lssue

From the President: The "T" in ACUTA....... Joe Harrington, Boston College

Second Dues lnvoices Mailed

The Daily Grind: What's on Your Desk Today?.......... Mona Brennan-Cotes, Univ. of Western Ontario

Calling All Young Professionals Amy Burton, ACUTA Mgr., Membership Mkt. & Corp. Relations

"The Future of Voice Communications": Winter Journal Looking for Articles

Board Report..................Riny Ledgerwood, San Diego State Univ.

Share Your RFIs/RFPs

Good Question on the ACUTA Listserv

lnfo Links ......... Randy Hayes, Univ. of Northern lowa

Disaster Recovery Requires Lots of What-lfs.................... Gary Audin, Delphi, lnc.

ACUTA Fall Seminar in Boston

ACUTA Webinar: Transitioning to lPv6 …

Keeping Employees Alive And Well, Farman A. Moayed

Department of Built Environment

No abstract provided.

A Study On Facility Planning Using Discrete Event Simulation: Case Study Of A Grain Delivery Terminal, Sarah M. Asio

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The application of traditional approaches to the design of efficient facilities can be tedious and time consuming when uncertainty and a number of constraints exist. Queuing models and mathematical programming techniques are not able to capture the complex interaction between resources, the environment and space constraints for dynamic stochastic processes. In the following study discrete event simulation is applied to the facility planning process for a grain delivery terminal. The discrete event simulation approach has been applied to studies such as capacity planning and facility layout for a gasoline station and evaluating the resource requirements for a manufacturing facility. To …

Social Innovation Concepts At Nasa: Integrating International Development Challenges And Hands-On Prototyping With Spacecraft Design Training, Leonard Yowell, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

The NASA Johnson Space Center Social Innovation program has been designed to encourage innovation within the NASA community that benefits both NASA's core mission as well as human needs domestically and internationally. By encouraging internal and external collaboration and providing resources including the new Johnson Space Center "Sandbox" design shop, new innovations are anticipated. Technologies developed for the human exploration of space share similar requirements with appropriate technology for the developing world. The technology goals of keeping people alive in a difficult environment involve addressing requirements for low maintenance and robustness and often include using renewable energy sources. Technologies developed …

Towards A Unified Definition Of Supply Chain Management, Edward Sweeney

Articles

A wide range of definitions of supply chain management (SCM) have been developed over the last three decades. The philosophy of SCM is based firmly on a recognition that it is only by working in a more integrated manner that competitive advantage can be maximised. However, for this to become a reality the development of common definitions and understandings between supply chain partners is a critical success factor. The corollary of this is that a lack of definitional consistency and a common understanding is an inhibitor to the successful adoption of SCM thinking in practice. This paper reviews a number …

A Systemic Approach To Next Generation Infrastructure Data Elicitation And Planning Using Serious Gaming Methods, Ersin Ancel

Engineering Management & Systems Engineering Theses & Dissertations

Infrastructure systems are vital to the functioning of our society and economy. However, these systems are increasingly complex and are more interdependent than ever, making them difficult to manage. In order to respond to increasing demand, environmental concerns, and natural and man-made threats, infrastructure systems have to adapt and transform. Traditional engineering design approaches and planning tools have proven to be inadequate when planning and managing these complex socio-technical system transitions. The design and implementation of next generation infrastructure systems require holistic methodologies, encompassing organizational and societal aspects in addition to technical factors. In order to do so, a serious …

Sustainable Oxygen: A Low Power Approach For Providing Emergency Medical Oxygen For Spacecraft And Hospitals In Developing Countries, Anndee L. Huff, Evan Rhead, Zdenek Zumr, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

An oxygen concentrator targeting an 80% reduction in power demand over commercial systems is being developed using a pressure swing adsorption process. This system is targeted for a service interval five times longer than commercial systems, and is tolerant to high humidity environments- the leading cause of device failure in developing countries. This system could provide emergency medical oxygen in a spacecraft without increasing oxygen concentration in the vehicle. Flight surgeons seek this capability, but presently, there is no system that meets power, size, and delivery rate requirements. This type of system is also well suited for medical oxygen in …

Effect Of Palletized Box Offset On Compression Strength Of Unitized And Stacked Empty Corrugated Fiberboard Boxes, S. Paul Singh, Jay Singh, Koushik Saha

Industrial Technology and Packaging

The purpose of this study was to evaluate the effect of pallet type, tie-sheet and stack configuration on compression strength of a palletized load of boxes. Four boxes made from similar board grade and different dimensions were selected for this study. The column stack configuration which represented the control was compared with the 3 stack configurations either on a CHEP® or GMA pallet. The unitized load either had a tie-sheet in between layers or no tie-sheet between layers of boxes on the respective pallets, for compression strength comparison with the control unitized load represented by a column stack configuration. This …

Effect Of Horizontal Offset On Vertical Compression Strength Of Stacked Corrugated Fiberboard Boxes, Jay Singh, S. Paul Singh, Koushik Saha

Industrial Technology and Packaging

The purpose of this study was to evaluate the effect of horizontal offset on the compression strength of stacked box configurations. Four different boxes of varying sizes and similar board combinations, made from similar flute but different manufacturers were studied. The single box compression strength for each type of box was determined to represent as the control for this study. The compression strength of control boxes were compared to overall strength of a three-high stack and in three different offset configurations. In addition a set of perfectly aligned boxes were compared to overall strength of a three-high stack and in …

Finding Robust-Under-Risk Solutions For Flowshop Scheduling, Steven O. Kimbrough, Ann Kuo, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We propose and explore, in the context of benchmark problems for flowshop scheduling, a risk-based concept of robustness for optimization problems. This risk-based concept is in distinction to, and complements, the uncertainty-based concept employed in the field known as robust optimization. Implementation of our concept requires problem solution methods that sample the solution space intelligently and that produce large numbers of distinct sample points. With these solutions to hand, their robustness scores are easily obtained and heuristically robust solutions found. We find evolutionary computation to be effective for this purpose on these problems.

Message-Passing Algorithms For Quadratic Programming Formulations Of Map Estimation, Akshat Kumar, Shlomo Zilberstein

Research Collection School Of Computing and Information Systems

Computing maximum a posteriori (MAP) estimation in graphical models is an important inference problem with many applications. We present message-passing algorithms for quadratic programming (QP) formulations of MAP estimation for pairwise Markov random fields. In particular, we use the concave-convex procedure (CCCP) to obtain a locally optimal algorithm for the non-convex QP formulation. A similar technique is used to derive a globally convergent algorithm for the convex QP relaxation of MAP. We also show that a recently developed expectation-maximization (EM) algorithm for the QP formulation of MAP can be derived from the CCCP perspective. Experiments on synthetic and real-world problems …

Scalable Multiagent Planning Using Probabilistic Inference, Akshat Kumar, Shlomo Zilberstein, Marc Toussaint

Research Collection School Of Computing and Information Systems

Multiagent planning has seen much progress with the development of formal models such as Dec-POMDPs. However, the complexity of these models -- NEXP-Complete even for two agents -- has limited scalability. We identify certain mild conditions that are sufficient to make multiagent planning amenable to a scalable approximation w.r.t. the number of agents. This is achieved by constructing a graphical model in which likelihood maximization is equivalent to plan optimization. Using the Expectation-Maximization framework for likelihood maximization, we show that the necessary inference can be decomposed into processes that often involve a small subset of agents, thereby facilitating scalability. We …

Real-World Parameter Tuning Using Factorial Design With Parameter Decomposition, Aldy Gunawan, Hoong Chuin Lau, Elaine Wong

Research Collection School Of Computing and Information Systems

In this paper, we explore the idea of improving the efficiency of factorial design for parameter tuning of metaheuristics. In a standard full factorial design, the number of runs increases exponentially as the number of parameters. To reduce the parameter search space, one option is to first partition parameters into disjoint categories. While this may be done manually based on user guidance, an automated approach proposed in this paper is to apply a fractional factorial design to partition parameters based on their main effects where each partition is then tuned independently. With a careful choice of fractional design, our approach …

The Inside-Out Classroom: A Win-Win Strategy For Teaching With Technology, Daniel J. Waldorf, Lizabeth Schlemer

Industrial and Manufacturing Engineering

As costs of higher education soar and many universities face uncertain funding models, institutional pressures have increased to improve instructor efficiency. At the same time, U.S. industry leaders and leading educators have called for improvements in engineering education based on more interactive, hands-on student learning experiences. Although many efforts have been made to take advantage of technology to either improve student learning or to maintain student learning while increasing instructor efficiency, few approaches have been shown to improve both learning and efficiency. A teaching method is proposed to improve student learning and increase student satisfaction while also addressing the instructors’ …

Evolving A Summer Engineering Camp Through Assessment, Katherine Chen, Lizabeth Schlemer, Heather Scott Smith, Teana Fredeen

Industrial and Manufacturing Engineering

EPIC (Engineering Possibilities in College) is a one-week summer program for high school students (entering 9th-12th grades) to learn about engineering and experience hands-on labs in a university atmosphere. It's an opportunity for students to explore the different types of engineering available at many universities. The aim of EPIC is to expand the College of Engineering mission to K-12 students: "To educate students for careers of service, leadership and distinction in engineering or other fields by using a participatory, learn by doing, ‘hands-on’ approach".

Design Projects With Out-Of-Town Companies, Lizabeth Schlemer

Industrial and Manufacturing Engineering

The capstone design class in the industrial engineering department at California Polytechnic State University, San Luis Obispo (Cal Poly) includes projects with companies. The projects are large ambiguous facilities design problems that allow students to incorporate many aspects of the IE curriculum. For the past 15 years students have been participating in these projects with local companies. Over the past several years, companies from out of town (200 miles to the north in Mountain View or 200 miles to the south in Oxnard) have participated. These out of town companies have presented certain logistical issues, but they have proven to …

E-10a Mc2a Systems Engineering Case Study, Air Force Center For Systems Engineering, William Albery

AFIT Documents

No abstract provided.

Enterprise Requirements And Acquisition Model, David A. Leach, Chad T. Searle

Theses and Dissertations

In support of senior leadership emphasis on improving early systems engineering and analysis, the Enterprise Requirements and Acquisition Model (ERAM) is a quantitative discrete-event process simulation model that accounts for activities from the identification of a desired space capability early in the JCIDS process through Milestone C of the acquisition system resulting in a probabilistic schedule distribution for a given concept. This model of the DoD's space capability development process will provide valuable decision making information for Concept Characterization and Technical Descriptions referenced during Analysis of Alternatives. The research focused on identifying activities, assigning historical triangular distributions and probabilities at …

Face Recognition Via Ensemble Sift Matching Of Uncorrelated Hyperspectral Bands And Spectral Pcts, Mohd Fairul Mohd-Zaid

Theses and Dissertations

Face recognition is not a new area of study, but facial recognition using through hyperspectral images is a somewhat new concept which is still in its infancy. Although the conventional method of face recognition using Red-Green-Blue (RGB) or grayscale images has been advanced over the last twenty years, these methods are still shown to have weak performance whenever there are variations or changes in lighting, pose, or temporal aspect of the subjects. A hyperspectral representation of an image captures more information that is available within a scene than a RGB image therefore it is beneficial to study the performance of …

A System Model For Green Manufacturing, Ahmed M. Deif

Industrial Technology and Packaging

Manufacturing systems evolution is afunction in multiple external and internal factors. With today’s global awareness of environmental risks as well as the pressing needs to compete through efficiency, manufacturing systems are evolving into a new paradigm. This paper presents a system model for the new green manufacturing paradigm. The model captures various planning activities to migrate from a less green into a greener and more eco-efficient manufacturing. The various planning stages are accompanied by the required control metrics as well as various green tools in an open mixed architecture. The system model is demonstrated by an industrial case study. The …