Operations Research, Systems Engineering and Industrial Engineering Commons^™

Rapid Sensor Technology: A Risk And System Complexity Analyses Of Early Detection Of Influenza-Like-Illnesses, Cesar Ariel Pinto, Ipek Bozkurt

Engineering Management & Systems Engineering Faculty Publications

The development of effective and reliable methods to defend the nation against biological terrorism remains an urgent challenge to researchers in the areas of risk, bio-defense, public health, and emergency medicine. The emerging threat of the avian flu pandemic also highlights the unpreparedness of our nation's health care system to meet a highly contagious and infectious disease outbreak. The implementation of a rapid sensor technology for early detection of influenza-like-illness provides possible opportunities, as well as problems. Bounding and defining such a complex problem is one of the first challenges this research addresses. Approaching this problem from various perspectives such …

Embedding Simulation Education Into The Engineering Management Body Of Knowledge, Andreas Tolk, Ghaith Rabadi, Donald N. Merino

Computational Modeling & Simulation Engineering Faculty Publications

The American Society for Engineering Management (ASEM) established a Body of Knowledge (BoK). As simulation is of growing interest to engineers in general and to engineering managers in particular, simulation is part of this documentation of domains of interest that characterise the profession. The basis for the Body of Knowledge comprises of established and accredited curricula and additional input from practitioners of the field. As it is essential to cover the basic topics and core competences as well as application specific domain knowledge, the simulation education for engineers is categorised into topics on simulation theory and simulation application.

Hybrid Approach For Site Selection Using Impact Assessment And Principal Component Analysis, Ugandhar Reddy Kondamadugula

Open Access Theses & Dissertations

Principle component analysis (PCA) is used to analyze week data of emission of particulate material from the Residential community. In this Thesis we selected five sites maps where sensors are arranged to collect particulate materials PM0.25, PM 10.Impact Assessment on the site areas are done in the first case,the results Impact Assessment on the site shows that the Global warming potential is really high at the site when the analysis is run for hundred years the Global warming potential has a very high impact on Environment leading to various health hazards. Secondly Principal Component Analysis is used to find out …

Electric Power Distribution Optimization Using Evolutionary Algorithms, Sowmya Parimi

Open Access Theses & Dissertations

In the present research, a new evolutionary algorithm is developed to solve the component allocation problem in electricity distribution systems. The problem addresses the upgrade/design of an electricity distribution system with the objective of minimizing expected system downtime subject to cost and repair time constraints. The algorithm is tested on the Dual Element Spot Network (DESN) configuration which is one of the most commonly used configurations by the power industry. This algorithm is demonstrated with two examples.

Discrete Element Modelling Of Silicon Nitride Ceramics: Crack Formation And Propagation In Indentation Test And Four Point Bending Test, Rajeev Senapati

Open Access Theses & Dissertations

Advanced ceramic materials have been extensively used in aerospace, automobile and other industries. However, the reliability of the advanced ceramics is the major concern because of the brittle nature of the materials. This work aims to model silicon nitride ceramics using Discrete Element Method (DEM) and simulating the crack formation and propagation. DEM software package PFC2D is used to simulate indentation test and four point bending test on silicon nitride ceramics and the behaviour of crack formation and propagation is identified. The numerical representation of ceramic materials is done by generating a densely packed particle system using the specimen genesis …

Using The Taguchi Design And The Central Composite Design To Increase The Robustness Of A Process From Its Raw Material Variability, Alvaro Cuevas

Open Access Theses & Dissertations

This research presents an experimental study where four controllable and one noise factor are analyzed using the Taguchi approach and the Central Composite Design (CCD) in order to induce robustness in a process that is being designed to treat residual grease from small restaurants. Three response variables are analyzed separately to establish the parameters conditions to obtain the most robust process output. These suggested conditions are validated conducting confirmation runs that are compared statistically to the predictions from the Taguchi prediction model for the Taguchi approach, and the Response optimizer for the CCD. The accuracy of each method is measured …

Analysis Of Possible Use Of Identification Technologies In Disassembly, Vukica Jovanović, Sreten Filipović, Gordana Ostojić, Stevan Stankovski, Milovan Lazarević

Engineering Technology Faculty Publications

The barcodes and Radio Frequency Identification tags that are being used during manufacturing, assembly, warehousing, and distribution could also be reused at the end of the product lifecycle for an identification of the correct disassembly process that would result in recycling of its components. The barcodes or RFID tags can be helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper, the analysis of the current applications of RFID Technology in the final phase of the product lifecycle will be presented. The simulation of the disassembly process supported by both barcode and RFID-enabled …

Retention And Productivity In Industrial Search And Scan Tasks, Camilo Aguilera

Open Access Theses & Dissertations

An experiment was developed in order to study the interaction between individual factors (gender and mood) and the retention ability in search and scan activities. 54 subjects between 18 and 30 years old participated in a computer-based memory test from the North of Mexico area. A full factorial design was used to analyze the variables. Two factors, one with two levels (gender: male and female), and the second factor with three levels (mood: positive, neutral, and negative) were used in the analysis. The output was measured as the amount of characters memorized in a string of random alphanumeric characters. Data …

Comparison Of Older Mexican American Upper Extremity Reach Capabilities To Older Anglo Americans, Odi Mike Ikpe

Open Access Theses & Dissertations

The study aimed to investigate if there are upper extremity reach capability differences in older Mexican Americans and older Anglo Americans. The subjects were recruited and corresponded to the 2000 census track. Upper extremity reach capability was determined by analysis of 20 range of motion variables. A MANOVA analysis utilizing SPSS software was performed with age, gender and ethnicity as independent variables while height and 20 range of motion anthropometric measurements servings as dependent variables (responses). Ethnicity as a function of age was found to be significant in height, horizontal distance from buttock to hand, rotation of head to the …

Nondestructive Testing For Finding Out The Displacement Of Crack In Silicon Nitride, Sriharsha Kurra

Open Access Theses & Dissertations

Nondestructive testing (NDT) has become an increasingly vital factor in the effective conduct of research, development, design and manufacturing. Only with the appropriate use of nondestructive testing techniques, the benefits of advanced materials science can be fully realized. NDT has a wide range of industrial applications and various methods and techniques are employed to perform the nondestructive testing. The current work aims to demonstrate the nondestructive testing technique applied to determine the damage in silicon nitride. Ceramics are brittle materials and non destructive evaluation methods are required to assess the quality and reliability of them. A nondestructive evaluation technique has …

Optimization Of Flow For Plastic Pbt With 45% Glass And Mineral Fiber Reinforcement In An Injection Over Mold Process Using Taguchi, Cpk And Mold Flow Simulation Software Approaches, Israel Sanchez

Open Access Theses & Dissertations

This Thesis analyze the plastic injection molding parameters in order to identify which parameters significantly affects the flow properties of Polibuthylen Thereptalate with 45% glass/mineral reinforcement, and which levels are the best to use for those parameters. With the purpose of optimizing the plastic flow conditions in an injection mold to obtain parts free from short shots (term used to describe a plastic part that is incomplete due to the poor plastic flow in the mold runners and cavities).

The used approach is Taguchi design of experiments to define which parameters have significant effect on the response variable, and the …

Using Two Channel Communication To Study Selective Auditory Attention Using Air And Bone Conducted Interfaces, Kutbi Nuruddin Kaliyakuwawala

Browse all Theses and Dissertations

The purpose of this study was to evaluate the human capability to use selective auditory attention across the two different hearing pathways, air conduction and bone conduction. Four two channel communication systems were used as a basis for comparison: (1) both channels presented via headphones (left ear and right ear each represent a different channel), (2) two channels presented via loudspeakers placed at 135° and 225°, (3) one channel presented via headphones (both ears) and one channel to bone vibrator (placed at the condoyle), and (4) one channel presented via bone vibrator and one channel via loud speakers (placed at …

The Effects Of Depth And Eccentricity On Visual Search In A Depth Display, George Angelo Reis

Browse all Theses and Dissertations

The attribute of depth has been shown to provide saliency or conspicuity for items in a visual search task. Novel displays that present information in real physical depth offer potential benefits. Previous research has studied depth in visual search but depth was mostly realized without real physical separation of display elements. This study aimed to better understand the effects of real physical depth and eccentricity on visual search in a depth display. Through this understanding, we can appropriately utilize this new technology. An experiment was conducted to test four hypotheses regarding how depth, eccentricity, target feature, and screen location would …

Application Of Modern Principles To Demand Forecasting For Electronics, Domestic Appliances And Accessories, Gregory Daniel Noble

Browse all Theses and Dissertations

Royal Philips is a large scale producer of consumer electronics, personal appliances, lighting, and healthcare appliances. Demand data from 12 Business Units (BU) of Royal Philips was examined in the study; four business units from each of three divisions: DAP, PA, and CE. From the data supplied, different forecast techniques were evaluated to determine which procedure produces the highest quality forecasts. Three forecasting techniques were evaluated using the provided data. The three forecasting techniques evaluated are the exponential smoothing forecasting method, the exponential smoothing with a linear trend forecasting method, and the Winters forecasting method.

The Visual Basic for Applications …

Integrated Faceted Browser And Direct Search To Enhance Information Retrieval In Text-Based Digital Libraries, Shea-Tinn Yeh

Browse all Theses and Dissertations

Browsing and searching are two prominent paradigms in information retrieval. In current digital library implementations, exploratory browsing is sometimes not available as an option. When offered, it is commonly presented as an alphabetical listing of chosen categories depending on the scope of the digital collections. In addition, users have to switch between different information spaces for browsing and searching. This research proposes an information retrieval paradigm of integrated faceted browser and direct search interfaces for text-based digital libraries. Experimental results show that compared to a conventional alphabetical browser, the faceted browser can significantly improve the effectiveness (by 30.8%, p = …

Gathering Cows Using Virtual Fencing Methodologies, Dean M. Anderson, Marek Doniec, Carrick Detweiler, Iuliu Vesilescu, Daniela Rus, Barbara Nolen, Roy Libeau

School of Computing: Conference and Workshop Papers

Free-ranging livestock are classically controlled by herders. Holding, moving, or gathering free-ranging cattle requires flexible husbandry practices for efficient and effective lowstress animal management. Behavioral theory and practical experience indicates cattle can be taught to respond to auditory cues. Preliminary research has demonstrated that cows can be gathered autonomously using recorded audio cues associated with manual gathering. However, efficient gathering requires movement in the proper direction. Therefore, we believe using audio cues administered from directional virtual fencing (DVF™) equipment can facilitate proper animal orientation and facilitate the gathering of animals with minimal human intervention. Results from applying directional audio cues …

Egypt's Information Society Strategy: A Critical Lexicography, Neil Mcbride, Bernd Carsten Stahl

Journal of International Technology and Information Management

The development of ICT policies within developing countries in the past ten years has opened up a new area for study. These documents chart the ambitions of the countries for the use of ICT to promote rapid development. As such they are intercultural documents, developing at the interface between the culture of the country and western economic culture. This paper develops a critical approach to understanding these documents and studying their message. The approach involves the preparation of a critical dictionary which identifies relevant terms within the ICT policy document and reflects on their multiple meanings. The approach was applied …

Usability Investigation Of E-Business Web-Based Forms, Gerald V. Post, Albert Kagan, Betsy Page Sigman

Journal of International Technology and Information Management

Usability on Web sites is critical because almost no training is provided for users on commercial sites. Instead, Web design relies on standards and consistency across sites. Traditional usability results indicated that computer forms should follow paper-based forms. Yet, Web paradigms have evolved that are quite different from paper-based forms. Specifically, this study reveals that users commit fewer errors and prefer simple forms limited to a single concept per screen. This conclusion significantly alters the recommendations for designing business forms.

Formal Verification Of Urban Traffic System Using The Concept Of Fuzzy Workflow Simulation, Manuj Darbari, Abhay Kumar Srivastava, Sanjay Medhavi

Journal of International Technology and Information Management

Modeling complex urban traffic system requires extensive use of workflow methodologies which can simulate almost real time traffic situations. Number of studies were done in the field of Urban Traffic Simulation like PLOTS, NETSIM and PALAMICS but none of them could provide a real formal solution. Our paper proposes a methodology using Fuzzy Petri nets for modeling real time traffic system. Fuzzy Petrinets are also visualised and tested by using Flow- Charter and HPSIM software packages. These packages help in providing successive iterations of process model for further refinement.

Supporting The Virtual Community: Social Bookmarking As A User- Based Classification Scheme In A Knowledge Library, Nicole Lytle, Tony Coulsom

Journal of International Technology and Information Management

Knowledge libraries hold the promise of widespread access to information available anywhere, anytime, freeing patrons from the geographical and temporal boundaries that currently exist. The classification of materials and subsequent searching of knowledge library content is an overall problem with many complex parts. Relevant classification is important for optimal information retrieval. This is especially important for the virtual communities that exist with extended organizations. Rooted in the virtual community and digital library literature, this paper develops a theory for improving the information classification and retrieval process of knowledge libraries that support virtual communities by applying social bookmarking techniques.

Rapid Development Of Multimedia Instructional Modules For Information Technology Education, Nanda Ganesan

Journal of International Technology and Information Management

A multifaceted learning model was developed for implementing e-learning in a largely commuter campus. The primary objective of the model was to build a flexible learning environment that combined the learning effectiveness of in-class learning with the flexibility and accessibility of online learning. One of the components of the model was the multimedia instructional modules produced to teach various Information Technology courses. Several different types of modules were produced representing chalk-and-talk type of lectures, PowerPoint presentations and software tutorials. The chalk-and-talk type of lecture modules and the software tutorials that emulated the in-class learning experience contributed positively towards enhancing the …

Can Information Systems Foster Emotional Intelligence? A Design Theory-Based Approach, Richard J. Burkhard, Thomas A. Horan, Brian N. Hilton, Michael Leih

Journal of International Technology and Information Management

Researchers in Information Systems (IS) have conducted extensive research into various kinds of collaboration systems over the last twenty-five years. A parallel stream of inquiry in psychology and management has developed research in organizational Emotional Intelligence, which contributes to the effectiveness of group interactions by increasing cooperation and reducing conflict. Collaboration systems present a special opportunity to introduce soft management functions such as Emotional Intelligence because they are designed as an intelligent channel of interaction between group members. This research used an Information Systems Design Theory approach to guide the integration of Emotional Intelligence functions into collaboration systems. Two artifact …

Business Risks: When Is Fails To Detect Circumvention Activities, Stanley X. Lewis Jr., J. Scott Magruder, Eddy J. Burks, Carl Smolinski

Journal of International Technology and Information Management

A business must recognize and address various risk factors when establishing and maintaining its information system. The overall risk to management is that the control environment does not protect proprietary business data and the financial reporting system that produces financial statements and other information used by investors, creditors and regulatory agencies. These risks require that management implement efforts to ensure the integrity and effectiveness of control procedures over business activities while being aware of additional system issues such as failing to adequately consider other risks which are more business-oriented including the risk of failing to prevent or detect fraudulent or …

Emergency Evacuation Route Planning Considering Human Behavior During Short- And No-Notice Emergency Situations, Suebpong Kittirattanapaiboon

Electronic Theses and Dissertations

Throughout United States and world history, disasters have caused not only significant loss of life, property but also enormous financial loss. The tsunami that occurred on December 26, 2004 is a telling example of the devastation that can occur unexpectedly. This unexpected natural event never happened before in this area. In addition, there was a lack of an emergency response plan for events of that magnitude. Therefore, this event resulted not only in a natural catastrophe for the people of South and Southeast Asia, but it is also considered one of the greatest natural disasters in world history. After the …

Physical Ergonomic And Mental Workload Factors Of Mobile Learning Affecting Performance Of Adult Distance Learners: Student Pers, Rochelle Jones

Electronic Theses and Dissertations

Distance education is the fastest growing educational modality because of advances information technology has made over the past 25 years. Adult learners have become the fastest growing population in distance education. Adult learners, through technical tools and devices they use on the job, have become more digitally literate and mobile, making the ability to access class work on the go a necessity. Mobile learning or m-learning (learning that uses wireless, portable, mobile computing, and communication devices) is becoming an extension of distance learning, providing a channel for students to learn, communicate, and access educational material outside the traditional classroom environment. …

Novel Nonparametric Control Charts For Monitoring Multivariate Processes, Panitarn Chongfuangprinya

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

The objective of this dissertation is to develop novel nonparametric control charts to effectively monitor and diagnose multivariate processes with a minimal set of modeling assumptions. Statistical process control (SPC) is a set of procedures that uses statistical techniques to measure, analyze, and reduce process variation. A control chart, which is a special type of graph showing the results of periodic inspections over time, is the primary and most successful SPC tool in real-world applications. This dissertation proposes two nonparametric multivariate control charts based on (1) a support vector machines (SVM) algorithm and (2) a linkage ranking algorithm. The first …

Unsupervised Data Mining Methods For Functional Data Analysis And Feature Selection, Panaya Rattakorn

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

The objective of this dissertation is to develop new unsupervised data mining methods for functional data analysis and feature selection. Unsupervised learning is a modeling process that facilitates the extraction of implicit patterns and elicits the natural groupings within the dataset without using any information from the output (response) variable. This dissertation consists of two main parts: (1) unsupervised clustering approaches for functional data analysis and (2) unsupervised feature selection. Functional data analysis has gained significant attention from a variety of disciplines. In this dissertation we propose an effective clustering procedure to categorize a number of profiles that are formed …

Methodology To Forecast Product Returns For The Consumer Electronics Industry, Amit Potdar

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Reverse logistics has gained much attention in recent years. It is becoming a value added area of a supply chain network day by day. For enterprises, it has therefore become essential to manage the reverse flow of materials in an efficient way to gain competitive advantage. One important aspect of reverse logistics is to have a correct and timely estimation of the reverse flow of materials. Improved forecast accuracy leads to a better decision making in strategic, tactical and operational areas of an organization. Intrinsic (time series) and extrinsic (causal) forecasting are some of the well known and frequently used …

Effect Of Truck Vibration During Transport On Damage To Fresh Produce Shipments In Thailand, V. Chonhenchob, S. Sittipod, D. Swasdee, P. Rachtanapun, S. P. Singh, Jay A. Singh

Industrial Technology and Packaging

The increase in global trade allows packaged products to be shipped across borders using inter-modal transportation. Trucks are still the most prevalent mode for surface shipments and time sensitive transport perishable products such as fresh produce. This study focused on measuring the transportation environment in truck shipments from various packing houses to major retail distribution centers in Thailand and then the subsequent distribution to regional stores in smaller trucks. Test measurements were compared to test methods used in North America and Europe. This study compared the quality of cabbage, lettuce, plums and pears after being shipped in truck transport by …

Performance Of Pre-Cut Lettuce Packaged In Biodegradable Film Formed On Commercial Vertical-Form-Fill-And-Seal Machines, J. Wyatt Brown, Keith Vorst, Shasta Palmer, Jay A. Singh

Industrial Technology and Packaging

The purpose of this study was to determine the feasibility of using biodegradable films suitable for fresh-cut lettuce with commercial vertical-form-fill-and-seal packaging machines (VVFS) equipped with heat-sealing bars. Biodegradable high-density polyethylene (BHDPE) and polypropylene (BPP) films were tested. Commercial bags of pre-cut Romaine sealed in a polyethylene/oriented polypropylene (PE/OPP) bag formed on a WFS machine were used as the control. All bags were held at 4.4°C, 80% RH and assessed for reduction in quality during storage per a commercial (in-house) standard utilized by a large pre-cut salad packer in Salinas, California. When the biodegradable films were sealed with a VFFS …