Operations Research, Systems Engineering and Industrial Engineering Commons^™

Application Of Artificial Neural Networks To Sensitivity Analysis And Modeling Of Small Office Buildings, Quan Tang

Dissertations and Theses @ UNI

Sensitivity analysis and Multiple Linear Regression (MLR) are the most extensively used techniques in studying the input-output relationship in building thermal systems. However, both MLR and most methods for sensitivity analysis do not account for nonlinear components embedded in building energy systems. Thus, their results might be distorted.

In this study, the Artificial Neural Networks (ANN) technique was applied to sensitivity analysis and modeling of an imaginary small office in order to (a) examine how the annual energy consumption responded to 40 building design parameters and evaluate relative contributions of these parameters to the variation of the building energy performance, …

Use And Effectiveness Of Decision Support Systems (Dss): Study Of The Saudi Private Sector, Ibrahim A. Alhunaishel

Dissertations and Theses @ UNI

In the industrialized world today, management is characterized by extensive use of computers to manage rapid change, information overload, and complex decision-making. Literature suggests that Decision Support Systems, computer packages offering information retrieval, problem-structuring models, decision alternatives, and other types of decision support, are effective extensions of human decision-making and offer substantial benefits to organizations utilizing them.

In spite of overwhelmingly positive reviews for DSS, empirical literature has produced inconsistent results regarding DSS effectiveness, and definitions of “effectiveness” and of DSS itself are varied and sometimes contradictory. Distinguishing DSS from MIS (management information systems) and other types of managerial computer …

Attitudes And Perceptions Regarding Internet-Based Electronic Data Interchange In A Public Organization In Saudi Arabia, Abdulrahman S. Al-Zumaia

Dissertations and Theses @ UNI

This study examined the attitudes and perceptions of staff members and administrators in the General Directorate for Private Institutes & Centers (GDPI&C), Training institutes, and Centers in Saudi Arabia toward Internet-based Electronic Data Interchange (I-EDI) in a public organization. A survey was conducted of a group of GDPI&C members and randomly selected Institutes and Centers. The 339 respondents participated anonymously by providing demographic information and completing the attitudes and perceptions section of I-EDI questionnaire. The survey response rate was 82.6%.

An attitude survey was distributed to staff members, administrators, and faculty members in the Saudi Arabian GDPI&C, Training Institutes, and …

An Analysis Of Manufacturing Facility Characteristics And Four-Year Manufacturing Engineering Technology Competencies For Abet Accredited Programs In North Carolina, Richard Eugene Temple

Dissertations and Theses @ UNI

The purpose of this study was to determine the degree of correlation between four-year ABET/MET competencies and company demographics of plant location and plant size and usage of manufacturing technologies, and to determine the overall rating per SIC classification of validated MET competencies. This purpose is reflective of the literature, which indicated that there is a need for further development of manufacturing engineering technology competencies to meet the industry needs of a region or state.

A questionnaire was used to collect data. It was mailed to 440 randomly selected practicing manufacturing engineers in North Carolina. The sample size was 50. …

The Factors That Affect The Implementation Of Enterprise Resource Planning (Erp) In The International Arab Gulf States And United States Companies With Special Emphasis On Sap Software, Saud Al-Sehali

Dissertations and Theses @ UNI

The primary purpose of this study was to investigate and determine the factors affecting the implementation of enterprise resource planning (ERP) in companies in the Arab Gulf States and the United States, using SAP software as an example.

A random sample was selected of 150 companies in the Arab Gulf States and in the United States that had implemented an ERP system using SAP software. Of the 150 respondents, 30 were companies from the Arab Gulf States and 120 from the United States. A total of 67 questionnaires were returned, a return rate of 44.7%.

The Statistical Package for the …

Pre-Inoculation Effect Of Sic In Production Of Thin Wall Ductile Iron Castings, Nikolay Y. Laukhin

Dissertations and Theses @ UNI

Pre-inoculation effect of SiC additions and its effect on castability, microstructure, and magnesium recovery in thin wall ductile iron plates have been studied. Experimental results were compared with alternative FeSi75 furnace pre-inoculation additions.

The first series of experiments aimed to set the baseline of iron quality, when using FeSi75 pre-inoculant

In the second series of experiment, different methods of introduction of Sic into liquid iron were studied. It was established that Sic added into the stream during the tapping into the flow-through chamber or added directly into the flow-through chamber produced lower Si recovery. The most effective method of introduction …

A Model For Production Scheduling And Sequencing Using Constraints Management And Genetic Algorithm, Ahmad Nadeem Choudhry

Dissertations and Theses @ UNI

Production planning and control (PP&C) are among the most critical activities in manufacturing. Proper use of PP&C methods can give organizations a competitive advantage in the global economy. The expected results of this research will allow manufacturing organizations to maximize the effectiveness of PP&C methods, thereby improving their competitive position in the global economy.

This research was an extension of a previous unpublished study, which investigated the PP&C methods being used at a midwestern manufacturer of agricultural equipment (MMAE). The current research study identified the constraints inherent in the production planning and control system and then developed and validated a …

Lithographers' Opinions About Waterless Lithography, Devang Pranlal Mehta

Dissertations and Theses @ UNI

The purposes of this study were to identify the advantages and disadvantages of waterless litho in comparison with traditional litho, to solve the controversial issues, to forecast the growth of waterless litho, and to inform graphic arts professionals about it. The problem of this research was to identify and measure perceived controversial issues for using the waterless litho process. These controversial issues were related to the return on investment and operating costs involved, productivity, quality of images, eco-friendliness, and technical problems associated with waterless litho.

Due to the fact that waterless litho was a developing technology and some controversial issues …

Perceptions Of Businesses On Environmental Regulatory Information, Kimberly K. Gunderson

Dissertations and Theses @ UNI

The purpose of this study was to determine the source and amount of information that a sample of businesses receive on environmental regulatory topics and from what sources they would prefer to receive this information. More specifically, the study demonstrated the discrepancy between the sources from which businesses currently receive their information and the sources from which they would prefer to receive it. The study also addressed how relevant this information was to the businesses and with which regulations the businesses were the most and least knowledgeable. The study was done by conducting a mail-back survey of 500 Iowa small …

Effects Of Refrigeration And Cryogenic Treatments On Austempered Ductile Iron, Gerard R. Thiel

Dissertations and Theses @ UNI

Low temperature treatment, as a method of improving mechanical properties of metals, has been studied and used for well over 60 years. Until recently these treatments have been limited to hardness and wear improvements of high alloy irons and steels. The purpose of this research is to determine the effects of refrigeration and cryogenic treatments on the mechanical properties, including hardness and tensile strength of austempered ductile iron.

This research included the production of a high strength ductile iron of low alloy content capable of being used in either the as cast, conventionally heat treated or austempered condition. Refrigeration and …

Ultrasound Modified Ferric Hydroxide/Cupric Ion Adsorption And Sequestration At Varying Ph Levels, Humberto Campos

Dissertations and Theses @ UNI

This study was undertaken to determine if hydrous metal oxide adsorption, an important treatment method used to remove adsorbates from aqueous solution, could be enhanced through ultrasonic irradiation. A model system based on preformed hydrous ferric oxide as the adsorbent and copper as the adsorbate was investigated. Brief exposure of the preformed hydrous ferric oxide floe to intense ultrasonic radiation (ca. 13 Watts/cm2 ) in the presence of copper species effectively disrupted the flocculated particles permitting the copper adsorbate to access adsorption sites previously isolated within the floe. The experimental data indicate that ultrasonic disruption of pre-formed hydrous ferric oxide …

The Effects Of Post Inoculant Additions On Ductile Iron Fade, Travis James Frush

Dissertations and Theses @ UNI

This study involved the investigation of three specific, commercially available, post inoculants for ductile iron and their effect on the magnesium fading rate and chill reducing tendency in a low volume production environment. Although fading effects of ductile iron have been extensively investigated, in general, they apply to high volume production operations. Unfortunately, for the smaller foundry operations, many of the process solutions proposed for the prevention of the fading effects are not applicable or practical. In addition to the small production operations, new process technologies are also excluded from many of these process solutions. For this reason, a study …

First Line Supervisor Perceptions: The Effectiveness Of Specific Safety Training Materials, Cynthia Houlson

Graduate Research Papers

The problem of this study was to determine whether first line supervisors, who have been exposed specifically to Safety Focus Topics, perceived them as an effective tool in filling their role as a safety trainer.

Investigation Of The Relationship Between Fuel Injection Nozzle Roto Flow And Hydra Flow And The Engine Torque Of A Diesel Engine, Guang Jin

Dissertations and Theses @ UNI

The purpose of this study was to investigate the possibility of reducing diesel engine torque variation by optimizing fuel injection nozzle tip configuration. In order to reduce engine torque variation, test runs were conducted to determine whether fuel injection nozzles affected diesel engine torque. There was a further effort to determine whether a correlation existed between the fuel injection nozzle roto flow and hydra flow, and the engine torque at specified engine speeds.

Engines installed in cotton pickers and tractors were used for this study. Engines, five from the cotton picker and five from the tractor group were chosen randomly …

Perceived Importance Of Iso 9000 Factors As Indicators Of Quality In Industrial Technology Related Programs At Four-Year State Regional Universities, Floyd L. Olson

Dissertations and Theses @ UNI

Industry has often used a quality standard known as ISO 9000. No evidence has been located demonstrating the applicability of an industrial quality model to a singular academic department. The problem of this study was to determine if the guidelines for ISO 9004-2 could have been considered appropriate for Industrial Technology related programs and how they could have been used to indicate quality within such programs.

The purpose of this study was to seek knowledge relating the importance of ISO 9004-2 guidelines to audit and/or improve the quality management of Industrial Technology related departments at 4-year state regional universities. This …

Identification Of Success Factors In The Implementation Of Computer-Integrated Manufacturing, Dean Harold Jensen

Dissertations and Theses @ UNI

The review of recent literature showed a clear trend within the manufacturing sector toward the integration of design and production activities through increased application of the computer. The competitive advantages of computer integration were reported, as well as increased risk due to the amount of time and capital expended in system implementation. The identification of computer integrated manufacturing (CIM) success factors may reduce this risk.

Prior efforts to identify success factors for other areas of endeavor showed that success factors tended to vary with the four project phases, but were stable over time within a particular phase. More recently, empirical …

Manufacturing Curriculum Issues Of Two-Year Mechanical Engineering Technology Program In Taiwan, R.O.C., Chuan-Chun Wu

Dissertations and Theses @ UNI

The purpose of this study was to evaluate current practices and possible changes in the mechanical engineering technology manufacturing curriculum in Taiwan's two-year junior technical colleges. The study was based on survey responses from three populations: (a) graduates of mechanical engineering (manufacturing division) programs in two-year junior technical colleges, (b) their manufacturing supervisors, and (c) their company chief executive officers (CEOs). The survey was designed to develop responses for following:

1. Determine the degree of importance of courses in the current Taiwanese two-year curriculum in manufacturing, in the opinion of the three groups surveyed.

2. Determine what the future curriculum …

An Investigation Of Performance Appraisal With Recommendations For White Collar And Blue Collar Workers, Mark W. Alberts

Graduate Research Papers

The accurate evaluation of an employee's performance, whether it be a salary or wage worker, is one of the most challenging problems confronting any organization. According to Lazer (1977), which is still true today, performance appraisal is absolutely necessary if an organization is to prosper in the highly competitive world of modern business.

Regardless of all that has been written about the how and why of performance appraisal, there still seems to be constant problems and areas of clear disagreement. Published writings about performance appraisal cover approximately the past 30 years and deal mostly with private corporations. Before that, performance …

Industrial Technology Faculty's Valuation Of Consulting And Professional Performance, Daniel Richard Meyer

Dissertations and Theses @ UNI

The purpose of this study was to investigate university industrial technology faculty relationships between their consulting with industrial and perceptions of professional performance. The question addressed was that if effects on teaching ability, research activity, scholarly publishing, and public service arising from this activity. The information obtained adds to knowledge and may be useful for administrators in supporting this form of public service. The result should be increased faculty competence, better prepared students, and increased industrial competitiveness.

Exogenous variables of consulting with industry, competency maintenance, theory testing, enthusiasm regeneration, research opportunity, and scholarly publishing were identified as having potential impact …

Development Of An Automated Ultrasonic Inspection Cell For Detecting Subsurface Discontinuities In Cast Iron, John Scott Burningham

Dissertations and Theses @ UNI

Manufacturing of value added products by companies in todays global marketplace requires the vendors to meet certain minimum standards, SAE, ASTM, ISO, etc. In a global economy, as a manufacturer for the year 2000 and beyond, preferred vendors will become ISO 9000 certified to maintain a market share of produced goods.

An automated inspection cell was developed for the inspection of cast iron ports to detect subsurface discontinuities. The cell consists of an ultrasonic flaw detector (UFD), transducer, robot, immersion tank, computer, and software. Normal beam pulse-echo ultrasonic nondestructive testing is performed on each rough casting.

Using test blocks and …

A Wear Analysis Study Of Selected Alternative Foundry Tooling Materials Using Impact Abrasion Testing, L. Fred Vondra

Dissertations and Theses @ UNI

The purpose of this study was to simulate the wear characteristics of foundry tooling using an impact abrasion test apparatus. The wear characteristic was exhibited by non-metallic materials and was measured as a function of percentage weight loss and was benchmarked against Class 30 gray iron. The research question focused on whether or not a non-metallic material exists that exhibits comparable or superior wear characteristics to Class 30 gray iron for possible consideration as tooling materials for foundry applications. The information obtained adds to knowledge and is useful to foundry professionals in making tooling decisions.

The 34 test materials were …

The Relationships Between Technical Operator Turnover Rate And Selected Working Condition Factors In Taiwan's Printing Industry, Ling-Hsiao Lee

Dissertations and Theses @ UNI

The purpose of this study was to determine how technical operator turnover rate related to selected working condition factors in Taiwan's printing industry. These factors, as defined in this study, included wages, employee benefits, alternative work schedules, training programs, and gainsharings. If the results of this study showed that technical operator turnover rate was related to these selected factors, then the findings of this study would be helpful to a manager making decisions on turnover management.

The data for this study were collected by using three sets of questionnaires: (a) one designed for personnel directors, (b) one targeted at financial …

Factors Affecting The Development Of Unassigned Patents In Iowa, Diane Darlene Wheeler Schou

Dissertations and Theses @ UNI

Inventors granted patents from 1975 to 1990 in Iowa identified, via a questionnaire, where they perceived their invention on Bright's scale of eight stages of development. Stages were: idea, rationalization (has merit), experimentation, demonstration of prototypes, working model, commercial (market entry), commercial acceptance (sales), and commercial proliferation (other markets). The questions identified factors affecting development. The factors included: resources assisting development, events influencing start-up, sources of money for development, method of manufacturing, experiences with manufacturers, marketing techniques, sales, profit/loss, concerns, patent renewals, and age of patents. Open-ended questions allowed for additional comments.

Commercial acceptance or commercial proliferation was achieved by …

An Assessment Of Just-In-Time Manufacturing, Ronald E. O'Meara

Graduate Research Papers

Manufacturing of materials into useable products has changed dramatically since the Industrial Revolution. The United States dominated the manufacturing arena until the early 1970s. After that period, efforts of global competitors in such areas as quality control and productivity, started to surpass the efforts made by the United Stated in these same areas. For the first time, U.S. manufacturers started sensing the pressure of competition. The United Stated is using its competitive advantage over other nations in the manufacturing segment. Part of this loss is a result of the way the U.S. manufacturers are conducting their business. A larger part …

The Importance Of Technology Assessment Procedures For Missionary Trainees, James Michael Hoeksema

Dissertations and Theses @ UNI

The purpose of this study was to identify those technology assessment (TA) procedures that are most important to teach to missionary trainees. This was based on the perceptions of the chief executive officers of U.S. Protestant mission agencies.

A survey was used to collect the research data. A total of 175 usable survey instruments were returned (25.6%). Analysis of the data consisted of frequency distributions and Chi-square.

A "common core" of TA procedures which are being used by mission agencies was identified. These were: (a) on-site field investigation, (b) committee meetings, (c) brainstorming, (d) personal interviews, (e) review of related …

Development And Validation Of A Model For Training Maintenance Supervisors For Productivity Improvements In Manufacturing Operations, Robert Reed Johnson

Dissertations and Theses @ UNI

The problem of this study was to develop and validate a training model for training maintenance supervisors. This training model focused on those areas, defined by industrial managers, where additional supervisory training was most likely to improve the performance of the maintenance departments.

Research of industrial and maintenance publications identified the maintenance function as having one of the lowest productivity levels in manufacturing organizations. Supervisor training was identified as a means to improve productivity in maintenance departments. An industrial survey completed by maintenance managers in manufacturing organizations in Iowa, Illinois, Minnesota, and Wisconsin identified those activities that were the responsibility …

Competencies Required Of Baccalaureate Degree Graduates From Graphic Communications Programs, Eldon B. Swanson

Dissertations and Theses @ UNI

The problem of this study was to identify and validate a list of competencies that may be used by graphic communications educators as the basis for curricula development that meets the needs of the contemporary graphic communications industry. The purpose of this study was to provide the graphic communications educator with a comprehensive, prioritized, and logically clustered list of competencies required of baccalaureate degree graduates from graphic communications programs as perceived by representatives from the graphic communications industry and graphic communications educators.

The survey instrument used for this study is based on a seven point graphic rating scale on which …

An Experimental Cost Model For The Analysis Of Quality Cost In A Manufacturing Enterprise, Wallace Charles Carlson Jr.

Dissertations and Theses @ UNI

The intent of the study was to construct a quality cost model for manufacturing enterprises. A quality cost model provides a manufacturing enterprise with a cost structure which enables it to gauge and measure the efficiency and effectiveness of its management and processes. The quality cost model was specifically constructed to aid a manufacturing enterprise in establishing a quality cost system for its operations and activities and contains three distinct initial implementation or decision areas; the quality cost management decisions area, the quality cost system applications area, and the quality cost system utilization area.

The quality cost model was evaluated …

A Comparison Of Present And Future Tasks Performed By Quality Engineers Of Leading And Nonleading American Manufacturing Firms, Zenon Theodore Smolarek

Dissertations and Theses @ UNI

This study identified and compared the level of importance and frequency of performance of 34 selected quality engineering tasks in the present and five years hence and determined potential catalysts for any expected change between the present and the future. Two sample groups of practicing certified quality engineers working for manufacturing companies in the United States were surveyed in three rounds to obtain the data. Group I consisted of 86 engineers working for companies that had been identified as leaders in product quality in a 1985 Gallup study. Group II consisted of 96 engineers from other companies.

The study attempted …

Survey Of The Quality Control Program At A Large Nanufacturing Corporation And Application Of An Identified Decision Making Tool To Solve The Most Costly Quality Problem, Giles Wright Jr.

Graduate Research Papers

The problem of this study has two major components.

1. Identify the major quality control concerns at a large manufacturing corporation.

2. Apply a selected decision-making tool to develop a solution for the most costly quality problem.