Reliability Analysis Of Low-Silver Bga Spheres Comparing Failure Detection Criteria, Briana Fredericks

Industrial and Manufacturing Engineering

One of the challenges of solder joint reliability tests is estimating the time of failure of the solder joint. Failure criteria should be able to detect solder joint failure as early as possible, while minimizing the probability of false detection. The failure mechanism under study is cracks due to thermal fatigue. The most common method to estimate failure due to cracks is to monitor the resistance during testing, because solder imaging and cross-sectioning methods are destructive. Current industry failure criteria do not adequately demonstrate the relationship between the size of the crack and the resulting change in resistance. This project …

Detachable Point Of Sale Material For Asparagus Shipper, Michael Thomas

Industrial Technology and Packaging

Gourmet Trading Company is a fresh fruit and vegetable distributor specializing in asparagus, blueberries, and blackberries. The company currently mails a 7” by 11” sign to be displayed with their asparagus which arrives in a 28 pound shipper. The signs are intended to be displayed in stores to give consumers information about the asparagus. Unfortunately, many of the signs do not get displayed since they are shipped separately. The purpose of the project is to redesign the 28 pound asparagus shipper to include a detachable point of sale sign.

A literature search was conducted to further understand the needs of …

Application Of Assignment Problem Theory To Cal Poly's Week Of Welcome Program Presentation Schedule, Kevin T. Aban

Industrial and Manufacturing Engineering

The Week of Welcome (WOW) is a part of Cal Poly’s Orientation Programs. One of the main objectives of WOW is to provide content to new students on a variety of different topics in the form of Awareness Presentations. The problem being addressed in this paper is that of assigning the orientation groups of incoming students to these Awareness Presentations so that they have a schedule that meets all of the necessary criteria. The most important of those requirements is schedule balance and flexibility for future use. This scheduling problem is solved through the use of operations research and binary …

Gyroscope Assembly Process Improvement Analysis, Ian Douglass, Juan Ulises Saucedo

Industrial and Manufacturing Engineering

The gyro is a fundamental portion of many assemblies that Company S, a directional drilling company, manufactures. The gyro assembly is a highly sensitive and complex process, and it was paramount to establish efficiency and quality guidelines to base management decisions. The first guideline succeeded by increasing throughput by means of a simulation using ProModel. Next, non-value and value added activities were identified through a value stream map. Lastly, a database was developed in order to capture high integrity quality control data, or key performance indicators, such as, throughput, first-pass inspection yields at every test performed, and defects found. This …

Implementation Of A Sustainable Project Management Methodology For Cal Poly Sae Baja, Theo Graziadei

Industrial and Manufacturing Engineering

A lack of project organization manifested through unclear team goals, rush deliveries of materials, lost tools and materials, half days of effort due to improper planning, wasted design time, missed submission dates, lack of clear job positions at competition, and low competition scores. A process was created to properly manage the team and it was implemented through the use of various templates, examples, and calculation programs. Each deliverable received feedback from this project’s stakeholders and changes were reflected in the final process. The results were as follows:

Table 1: Summary of Results

Implement a sustainable project management methodology

Each step …

The Design, Testing, And Manufacturing Of A Pin Fin Extrusion Heat Sink, Arash Michael Mira

Industrial and Manufacturing Engineering

My senior project focuses on the design, testing, and manufacturing of pin fin extrusion heat sinks that are you used to cool simple electronic applications across a multitude of markets. Without the modern day heat sink, electronics that we have become familiar with throughout our everyday lives will cease to exist. I will design these heat sinks using Solid Works 3D CAD. I will then test the heat sinks using ICEPAK CFD software, where I will model the heat sink against a 5 watt application, inside of a cabinet that models the chassis of a computer. After receiving these results, …

Csp Desalination/Water Purification Unit, Sean Goodison

Industrial Technology and Packaging

An estimated 3.4 million people die each year from unsanitary water or inaccessible water supply. Most of these deaths take place in the developing, third world (99%). There is a dilemma arising on the world stage as well. The water demand/supply deficit is expected to increase significantly over the next 37 years if preemptive action isn’t taken. 97% of the world water supply is oceanic, making it an attractive solution to the water deficit. Providing autonomous, “deploy and watch” systems for utilizing sustainable energy to provide purified water for unitized low pricing has the potential to penetrate a large world …

Evaluation And Design Of Potting Production Process Improvements For The Non-Profit Organization, Growing Grounds Farm, Maiya Avalon Bourland, Precilla Tang

Industrial and Manufacturing Engineering

This report focuses on the potting production process for the non-profit organization (NPO) Growing Grounds Farm (GGF), and aims to promote a standardized workflow system to enhance the working experience for Transitions‐Mental Health Association employees and volunteers. This project takes careful consideration into the process improvements proposed so to support the double bottom line of economic and social objectives. To address the equally important objectives, the Human Centered Design toolkit created by IDEO, specifically for third sector organizations, was integrated with the traditional Industrial Engineering design process methodology. Feasible alternatives were developed and evaluated based on the objectives. The selected …

Design Of An Automated Employee Scheduling System, Matthew Cameron, Yuriy Goldman

Industrial and Manufacturing Engineering

Many retail stores, as well as other organizations that employ a multitude of part-time employees, rely on developing schedules frequently, since the availabilities of the employees as well as the needs of the business change often. This process is often performed on a weekly basis, and is complex and time-consuming. The schedule must typically satisfy numerous requirements, including business needs, legal restrictions, and employee availability constraints. As a result, errors are common, and employee time that could have been spent on improving sales or operations is instead consumed by the scheduling task.

This project explores two solution methods for this …

Atk's Radial Airframe Forming Process Assessment, Andres Martinez

Industrial and Manufacturing Engineering

The purpose of this project was to provide ATK with a solution to increase efficiency in the R-02 radial forming center so that it could meet the increase in demand projected for the next 5 years. In addition, give ATK projected dates of when new machines would need to be implemented to be able to keep up with the demand. The system was analyzed through time studies to identify areas of possible improvement and eliminate any non-value added activities. Cycle times of each activity were used to simulate the current state of the system using ProModel software. Changes in operations …

Restaurant Design: An Industrial Engineering Perspective, Joseph Travis Spanu

Industrial and Manufacturing Engineering

The objective of this paper is to design a health food restaurant using current industrial engineering tools and practices. This includes creating a menu, determining the average gross profit per customer, determining the location, designing a 3-d layout, simulating service, and analyzing local food supply chains. Using a simplified menu and pricing quotes from a food distributor, the average gross profit per customer is estimated to be $3.50. Location is determined by comparing the predicted number of customers and the cost to rent at two different areas. A downtown location is determined to gross approximately $5,200 per month over a …

Women's High Heel Discomfort Analysis And Prototype Solution, Kevin Blakley, Annamarie Kepple

Industrial and Manufacturing Engineering

ABSTRACT

WOMEN’S HIGH HEEL DISCOMFORT ANALYSIS AND SOLUTION

Kevin Blakley and Annamarie Kepple

Women love high heeled shoes, but this love comes at the cost of comfort. Wearing high heels causes a lot of pain and, in the long term, health complications. This project tries to overcome the problem by ultimately making high heels more comfortable. In order to do this, one must first understand the reasons that high heels are uncomfortable, such as arch angle, heel height, and the changes in walking motion. Once there is a true understanding of the factors that contribute to high heel discomfort, the …

Polyparking, Christopher Blackmer, Michael Suttie

Biomedical Engineering

The purpose of this senior project is to analyze the various options for the implementation of a parking lot information system on the California Polytechnic State University, San Luis Obispo campus. This system would involve three main components: physical counting hardware, a database and analysis organization system, and a user interface for disseminating the gathered information. The project investigates and provides commentary on various available and commonplace systems, and the benefits and drawbacks of these systems. During the course of the project, a flexible database and user-interface was developed in Microsoft Access, which will allow counter output to be gathered …

Rfid Technology Selection And Economic Justification For Healthcare Asset Tracking, Tyler Robert Peabody, Tali Freed

Master's Theses

Although Radio Frequency Identification (RFID) and Real-Time Location System (RTLS) technologies for inventory tracking have been growing in popularity, the healthcare industry has been reluctant to adopt these technologies. One of the primary reasons for this lack of enthusiasm has been the risk associated with electromagnetic interference between RFID/RTLS systems and medical equipment functionality. The other reason has been the substantial cost and complexity of implementing RFID/RTLS in healthcare organizations. In this study, we show that there are several ways to safely install RFID/RTLS systems to improve the inventory management processes of hospitals and clinics. We then analyze the inventory …

Deterioration Of Metal–Organic Framework Crystal Structure During Fabrication Of Poly(L-Lactic Acid) Mixed-Matrix Membranes, Ajay Kathuria, Mohamad G. Abiad, Rafael Auras

Industrial Technology and Packaging

Poly(l-lactic acid) (PLLA) and metal–organic framework (MOF) mixed-matrix membranes were prepared by melt extrusion of PLLA with 5% (w/w) of either activated or water-saturated Cu₃(BTC)₂ (Cu₃(C₉H₃O₆)₂(H₂O)₃·xH₂O, HKUST-1). The morphology and the stability of injection-molded samples were evaluated using thermogravimetric analysis, differential scanning calorimetry, gel permeation chromatography, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The presence of activated and saturated MOF crystals increased the cold crystallization onset temperature as compared to neat PLLA. This can be attributed to the …

Strider: Manufacturing Processes, Michael Warren-Angelucci

Industrial and Manufacturing Engineering

The goal of the Strider Project is to create a mobility device that can support a person with weakened leg strength and enable them to be supported and maintain a standing position. A prototype of the Strider was created by three Mechanical Engineering students as their senior project. The topic of this senior project was to analyze and create a manufacturing process for the manufacture of the Strider that will be ergonomic and cost effective.

There were many things that needed to be accomplished in order to create the manufacturing process. The first step was to verify that the prototype …

Process Improvements For Establishing Cmmi Certification At Company Xyz, Megan Farrell

Industrial and Manufacturing Engineering

CMMI stands for Capability Maturity Model Integration and is an enterprise-wide Process-Improvement model that provides a set of best practices that addresses productivity, performance, costs, and stakeholder satisfaction. This improvement model is generally used in computer software companied and not only does it improve their processes, but many contracts will only be awarded with those companies who are CMMI certified, so it is very important for Company XYZ. This goal of this project was to help improve the CMMI efforts at Company XYZ in 4 of the 20 distinct processes areas to attain a CMMI Maturity Level of 3. Improvement …

Design And Manufacture Of Natural Composite Canoe, Derek Baptista

Industrial and Manufacturing Engineering

Abstract

This report looks into the application and feasibility of manufacturing natural composite canoes. The main fabrics that were analyzed are flax, hemp, and jute. These were then compared to carbon fiber and fiberglass to see the difference in mechanical properties. It was found that the natural fibers have lower mechanical properties but that this could be overcome by designing a balsa wood core with ribs running up the walls. After manufacturing a hemp canoe, many lesson were learned and areas of interest were further explored. With the use of different natural fibers, these canoes can greatly reduce the carbon …

Chsr Clothing: How To Start A Small Business Clothing Line To Be Run Efficiently With Minimum Capital And Maximum Profit, Kayvon Banisalam

Industrial and Manufacturing Engineering

Executive Summary

Many clothing brands have failed because they did not design marketable products with a suitable business plan. Often times, clothing brand owners do not use the capital they possess in efficient ways. They can get caught off guard with unexpected costs and are not running the business in the most resourceful and professional way.

The goal of this project is to create a clothing brand that portrays distinctive designs to go along with an effective business model. This includes implementing decision analysis at several points of the planning phase, along with quality and cost controls. Creating quality products …

Facilities Planning For An Aerospace Manufacturing Company, William Petrossi

Industrial and Manufacturing Engineering

Absolute Technologies Inc. (ATI) has been growing for years, and is running out of space at their current manufacturing facility in Yorba Linda, CA. ATI will be moving to a much larger facility this winter. They are looking for an efficient way to utilize this space. The machine positions were taken as fixed, seeing as a lean expert was brought in to give advice on placement. With the machines fixed, the scope was narrowed to other areas.

A systematic approach to facilities design is utilized. First, a goal needs to be defined. The goal is to reduce the time wasted …

Consolidation Of Company Abc, Estelle Sillari-Owen

Industrial and Manufacturing Engineering

This project aims to solve Company ABC’s issues in order to keep the company afloat and to keep the company profitable. This was done by reducing Company ABC’s organizational and inventory build-up issues. The project aims to reduce the company’s dependence on outside storage, with plans of consistent inventory reduction over the next year. An implementation plan was created to ensure the company keeps on track to increase profits and prevent against increasing inventory costs.

Consumer Attention To An Over-The-Counter Warning In Four Different Styles Of Design, Abhishek Gawasane, Laura Bix, Javier De La Fuente, Raghav Prashant Sundar, Timothy J. Smith

Industrial Technology and Packaging

The study consisted of three objectives: (a) to test the relative prominence and conspicuousness of a warning required by US law to be conspicuous; (b) to explore whether or not the conspicuousness of the said warning can be enhanced graphically; and (c) to develop preliminary data for power analysis that would guide decisions related to sample size in future studies.

Seventeen subjects viewed four over-the-counter drug packages (each with a different style of warning) along with five other products while wearing an eye tracking device. Four styles of warning were used on the over-the-counter drug packages: no outline and no …

Reliability Analysis Of Low-Silver Bga Solder Joints Using Four Failure Criteria, Erin A. Kimura

Master's Theses

The appropriate selection of failure criterion for solder joint studies is necessary to correctly estimate reliability life. The objective of this study is to compare the effect of different failure criteria on the reliability life estimation. The four failure criteria in this study are a 20% resistance increase defined in the IPC-9701A standard, a resistance beyond 500 Ω, an infinite resistance (hard open), and a failure criterion based on X-bar and R control charts. Accelerated thermal cycling conditions of a low-silver BGA study included 0°C to 100 °C with ten minute dwell times and -40°C to 125°C with ten minute …

Work In Progress: Outreach Assessment: Measuring Engagement, Lizabeth Schlemer, John Oliver, Katherine Chen, Sophia Rodriguez Mata, Eric Kim

Industrial and Manufacturing Engineering

The Learn By Doing Lab (LBDL) at Cal Poly, San Luis Obispo is an on-campus laboratory where 5th through 8th grade students are taught by undergraduates who may be planning a careers in teaching. The two populations - elementary students and undergraduates - are equally important in the process. Since 2008, the lab has seen over 4000 elementary and junior high students and over 100 undergrads have participated. In most outreach assessment the number of individuals participating is an important metric, but this last Spring we experimented with a more in depth measure of effectiveness. As in any learning experience …

Warehouse Redesign, Cristine Carmel Dewar

Industrial and Manufacturing Engineering

A young, growing biomedical company is expanding its warehouse space to keep up with the increasing production. This project’s goals were to recommend a layout and improve a process that would minimize the distance traveled by the material handlers, increase the safety of the warehouse by implementing visual controls, implement ergonomics to reduce chance of injury, and save money for the company. To achieve this first I familiarized myself with their current processes and department and the space required for their current and future production levels. Next I created two alternative layouts, the first (Layout A) to minimize distance and …

The Effect Of Stretch Wrap Pre-Stretch On Unitized Load Containment, Evan A. Cernokus

Master's Theses

There are three main factors affecting the stability of a palletized load that is unitized by a stretch wrapping mechanism. These factors include the type of unitized load, wrapping configuration and shipping method. The wrapping configuration is determined on the basis of the type of unitized load and shipping method. For this study, the aforementioned components were referred to as the package, the product, and the distribution environment. These components come together to make up a stretch wrapping system. The package corresponds to the stretch wrap film that is packaging the unitized load and pallet. The product corresponds to the …

Blunt Impact Performance Evaluation Of Helmet Lining Systems For Military And Recreational Use, Jaclyn Siniora, Ryan Taylor, Darren Suey

Industrial Technology and Packaging

With the increasing problem in collegiate athletes experiencing injuries to the brain, different helmet liners where put to the test to see which liner provided athletes the greatest protection under specific conditions.

This senior project evaluates five different liners in football helmets. Each of the helmet liners were tested at three different temperatures: hot, cold, and ambient. Each helmet had seven different impact locations which were put to the test. The project was designed to be used to test ACH military combat liners as well. Due to shipping bottle necks the ACH combat liners have been left to future Cal …

Comparative Analysis Of Erp Emerging Technologies, Ryan Engebrethson

Master's Theses

This Master's Thesis compares technologies used in the architecture of Enterprise Resource Planning (ERP) Systems to evaluate the benefits and advantages of emerging technologies. The emerging technologies, Cloud Computing, Software as a Service (SaaS) and Multi-Tenancy, could significantly alter the current ERP space and become a primary part of ERP Systems of the future. A survey was sent to industry professionals to obtain feedback on their company's ERP Systems and to collect their comments on these new technologies. The survey results and related analysis show that Emerging Cloud ERP Systems outperform Traditional Legacy ERP Systems in all important characteristics - …

Rfid For Inventory Of Medical Records, Johny Wu

Biomedical Engineering

The purpose of this project is to explore the feasibility and economic viability of the implementation of a radio frequency identification (RFID) system in a large-scale, medical office setting. Practitioners in fields such as; medicine, chiropractic, dentistry, nursing, pharmacy, allied health, and other care providers do not have a sufficient method for tracking filing forms. RFID has the potential to reduce wait time, improve checking-in time, and decrease the possibility of interchanging documents between patients.

The purpose of this RFID system is to improve upon the filing system already in place in any office setting. The major consideration behind this …

Assessing Lean Systems Using Variability Mapping, Ahmed Deif

Industrial Technology and Packaging

A new approach to assess lean manufacturing based on system's variability is proposed. The assessment utilizes a new tool called variability source mapping (VSMII) which focuses on capturing and reducing variability across the production system. The new tool offers a new metric called variability index to measure the overall variability level of the system. Based on the mapping and the new metric, VSMII suggests a variability reduction plan guided by a recommendation list of both lean techniques as well as production control policies. An industrial application is used to demonstrate the new tool. Results show that VSMII managed to reduce …