Operations Research, Systems Engineering and Industrial Engineering Commons^™

Remote Measurement Of Plant Biomass By Picosecond Laser Radiation, Abdushukur Abdugafurovich Mukhamedov, Abdirashid Saribaevich Rysbaev, Shamsiddin Norchaevich Ernazarov

Chemical Technology, Control and Management

A description is given of a high-speed optical recording system that uses a solid-state yttrium-aluminum garnet Nd3+ laser that generates a train of picosecond laser pulses. It is shown that by registering and temporarily scanning the secondary fluorescence radiation excited by a sequence of picosecond pulses, it is possible to remotely determine the biomass of plants based on a prematurely created bank of laboratory data.

International Higher Education Cooperation Under Conditions Of Fuzzy Terminology: Intellectual Mobility Vector, Ulugbek Vasikovich Mannanov, Igor Ivanovich Gancherenok

Chemical Technology, Control and Management

Terminology analysis of higher education internationalization process concerning joint educational programs is fulfilled. Fuzziness of used terminology is demonstrated. Joint higher education establishments development in the framework of fractal model is suggested as a strategic direction of higher education internationalization, enhancement of its quality and a concept of effective intellectual mobility.

Synergetic Control Of Nonlinear Dynamic Objects, Isomiddin Siddikov, Komil Usmanov, Noilakhon Yakubova

Chemical Technology, Control and Management

Considers the synthesis of effective control algorithms for a chemical reactor, which is the main one in the production of butyl alcohol. The method based on synergetic approach for transferring the apparatus from one capacity to another (specified) maintaining the required quality of the target component is proposed in order to ensure the stabilization of the concentration of target component at the outlet of the reactor under the conditions of uncertain disturbances affecting to an object. A mathematical model of the process based on a stoichiometric matrix taking into account the physicochemical properties of the process is developed. The control …

Research Properties Of Solving Problems Of Parametric Optimization, Dilnoz Tulkunovna Muhamediyeva

Chemical Technology, Control and Management

A model of parametric optimization with fuzzy initial information is constructed. The conditions and areas of application of the main methods of the theory of fuzzy sets in studies of parametric optimization are determined. A connection is established between the stability of parametric optimization problems and fuzzy optimization problems. An algorithm for solving problems by the method of parametric programming is developed for fuzzy given initial information. The admissible region of the parametric programming problem and the value of its objective function at each point of this region depend on the parameter t. A description of the method for solving …

Development Of A Control Device And Algorithm For Autonomous-Moving Systems, Farhod Qosimov, Ru Jiang, Dong Zhang, Mirkhalil Ismailov

Chemical Technology, Control and Management

The article is devoted to improving the control and algorithm for Autonomous moving systems. The function of the controller is to provide communication between the control computer and the actuator. The ATmega2560 microcontroller is selected as the main processor. The electrical diagram of additional devices of the microcontroller is formed. Printed circuit boards consisting of separate blocks are made on the basis of the electrical circuit. To exchange information with external systems and process the received data, a special algorithm for the microcontroller has been created. The microcontroller is programmed based on this algorithm. The analysis of the functioning of …

Extraction Of Chitosan From Died Honey Bee Apis Mellifera, Gulnora Akmalovna Ixtiyarova, Dilshoda Azamovna Hazratova, Bobur Nosir O’G’Li Umarov, Oksana Muratbayevna Seytnazarova

Chemical Technology, Control and Management

This article presents the results of obtaining biopolymers of chitin and chitosan from a new promising source- died honey bee apis mellifera. To obtain chitin, at the first stage, the protein (deproteination) and mineral (demineralization) constituents of subpestilence, i.e. put them in soluble state and removed. Demineralization was carried out with 2 M hudrochloric acid for 5 hours at room temperature. The process of deproteination is carried out by processing the crushed raw materials with 1 N sodium hudroxide solution for 1 hour at a temperature of 80⁰С. Each process was accompanied by washing the raw materials to …

Mathematical Modeling Of Thermal Processes Of Traction Asynchronous Engines For Diagnosis And Control Of Their Technical Condition, Nilufar Rabbanaqulovna Avezova, Javharbek Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

Mathematical models of thermal processes of traction asynchronous motors are developed. A traction asynchronous motor is considered as a thermal system consisting of three bodies (stator winding, stator magnetic core and rotor), which take into account the heat exchange not only between the corresponding bodies, but also the heat exchange between each body and the environment. It is shown that the steady excess of the stator winding temperature of a traction asynchronous motor depends on the multiplicity of the stator winding current, the coefficient of electrical energy loss, and also on the temperature coefficient of the resistance of the winding …

Precise Measuring Cells For Quantitative And Qualitative Measurement, A.A. Begunov, B.M. Akhmedov, R.A. Ibragimov

Chemical Technology, Control and Management

The main provisions considered in assessing the accuracy of methods and measurement results are considered. It is shown that in the experimental assessment of various accuracy indicators, and also when analyzing the content of components in various gaseous media, the sorption-gravimetric measurement method is widely used, methods for measuring the mass of the sorbent and possible sources of error of this technique. Methods of measuring the mass of gas using specific surface areas, including taking into account the contact of gas with a solid material, and also, the amount of adsorbed gas and its pressure, temperature, type and size of …

Controlling And Forecasting The Reliability Of Integrated Circuits Of Radio Systems Transmitting Information, Abdulaziz M. Nazarov Prof, Dilmurod A. Davronbekov Prof.

Chemical Technology, Control and Management

The issues of forecasting the reliability of integrated circuits, which are the main element base of modern radio engineering information transmission systems, are considered. Methods of parametric and functional control are described to determine the correspondence of the static and dynamic parameters of microcircuits to the required values. A combined method for determining the operating parameters of microcircuits is also described. The advantage of this method in addition to the two above methods is indicated that it combines the function of controlling the operation of the entire control system. Two approaches for predicting reliability are given, as well as mathematical …

Features Of Hydration Process, Structure Formation And Curing Processes Of Mono And Polymineral Cement In The Presence Of Additives Of Solid Waste Of Soda Production, Nargis Shamadinova, Gulnora Abdukadirovna Tokhtakhunova Phd, Temur Azimovich Atakuziev, Shakhnoza Saidanvarovna Rakhimjanova

Chemical Technology, Control and Management

The influence of the additive of solid waste of soda production (SWSP) on the content of -C₂S and C₃S in cement studied. It was found that SWSP affects the density of the aluminum-containing minerals C₃A and C₄AF, in addition, in the presence of gypsum, their plasticizing properties improved. The introduction of SWSP additives during grinding of clinker intensifies the grinding process and made it possible to obtain a more plastic cement. It was proved that SWSP with CaCl₂ content can be used as an additive to concrete and cement mortars - …

Investigating The Solution Properties Of Population Model Of Cross-Diffusion Model With Double Nonlinearity And With Variable Density, Dildora Kabilovna Muhamediyeva

Chemical Technology, Control and Management

The models of two competing populations with double nonlinear diffusion and three types of functional dependencies are considered. The first dependence corresponds to the Malthusian type, the second to the Verhühlst type (logistic population), and the third to Olli-type populations. A common element of this kind of description is the presence of a linear source. Nonlinear sinks are also present in descriptions of populations of the Verhulst and Ollie type. Suitable initial approximations for a rapidly converging iterative process are proposed. Based on a self-similar analysis and comparison of the solutions of the Cauchy problem in the domain for an …

Techniques To Solve Decision-Making Problems, Dilnoz Tulkunovna Muhamediyeva, Bekmuratov Fayzievich Tulkun

Chemical Technology, Control and Management

Solving decision-making problems in poorly formalized systems only with the help of deterministic and probabilistic methods is insufficient. To do this, it is necessary to widely apply the methods of hybrid intelligent systems and, especially, the methods of “soft” calculations (SoftCalculation, SoftComputing) and the directions of ComputationalIntelligence — intelligent computing technologies that are emerging on this theoretical and methodological base. An immune - fuzzy algorithm for the synthesis of fuzzy inference systems (FIS) is proposed. A two-stage adaptive FIS synthesis algorithm is described. At the first stage, the initial fuzzy parameters are clustered in order to reduce the number of …

Neuro-Fuzzy Modeling For Predictive Control Systems With Complex Technological Processes And Production, Yusupbekov Nodirbek, Shukhrat Gulyamov, Malika Doshchanova

Chemical Technology, Control and Management

The paper implements a modification of a fuzzy neural network, which is suitable for predictive control purposes. Adaptation of a multidimensional programmable controller based on a neural algorithm for the back propagation of forecasting errors is proposed, as well as neural parametric identification of a fuzzy mathematical model of complex technological processes and production based on experimental data and expert estimates.

Steady Algorithms For Synthesis Of Multidimensional Controlling Systems With Incomplete Information About The Object State, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

In this paper, questions of forming and creation of steady synthesis algorithms of multidimensional controlling systems at incomplete information on object status are considered. It is shown that the matrix of feedback coupling on a status at the complete information is not determined. The different algorithms of steady calculation of a matrix pseudo-inverse to the matrix of outputs using these or those decomposition of matrixes are analyzed. Algorithms of iterative specification of a required solution of "skeletal" decomposition are given. The given expressions allow synthesizing the simplified computing procedures of synthesis of multidimensional controlling systems at incomplete information on object …

Importance Of Morphological Features In Orthoptera Identification, Kamilov Mirzoyan, Alisher Khamroev, Hudayberdiev Mirzaakbar

Chemical Technology, Control and Management

This article analyzes the problems of implementing image recognition methods and algorithms for identifying biological objects. The Orthoptera group was chosen as a biological object. Orthoptera is a taxonomic order of insects that includes grasshoppers, crickets, locusts, and others. Approaches to the formation and identification of features of Orthoptera species and the formation of training and control samples of their samples are proposed. Estimation algorithms (ACE) were chosen as algorithmic support for identifying Orthoptera collections. ACE is based on the principle of partial priority. Approaches to the formation of a training and testing complex based on the data from the …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

On Accounting For Equipment-Control Interactions In Economic Model Predictive Control Via Process State Constraints, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Traditionally, chemical processes have been operated at steady-state; however, recent work on economic model predictive control (EMPC) has indicated that some processes may be operated in a more economically-optimal fashion under a time-varying operating policy. It is unclear how time-varying operating policies may impact process equipment, which must be investigated for safety and profit reasons. It has traditionally been considered that constraints on process states can be added to EMPC design to prevent the controller from computing control actions which create problematic operating conditions for process equipment. However, no rigorous investigation has yet been performed to analyze whether, when a …

Economic Model Predictive Control Design Via Nonlinear Model Identification, Laura Giuliani, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Increasing pushes toward next-generation/smart manufacturing motivate the development of economic model predictive control (EMPC) designs which can be practically deployed. For EMPC, the constraints, objective function, and accuracy of the state predictions would benefit from process models that describe the process physics. However, obtaining first- principles models of chemical process systems can be time-consuming or challenging such that it is preferable to develop physics-based process models automatically from process operating data. In this work, we take initial steps in this direction by suggesting that because experiments that are used to characterize first-principles models often target specific types of data, an …

Data-Based Nonlinear Model Identification In Economic Model Predictive Control, Laura Giuliani, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Many chemical/petrochemical processes in industry are not completely modeled from a first-principles perspective because of the complexity of the underlying physico-chemical phenomena and the cost of obtaining more accurate, physically relevant models. System identification methods have been utilized successfully for developing empirical, though not necessarily physical, models for advanced model-based control designs such as model predictive control (MPC) for decades. However, a fairly recent development in MPC is economic model predictive control (EMPC), which is an MPC formulated with an economics-based objective function that may operate a process in a dynamic (i.e., off steady-state) fashion, in which case the details …

Chemical Storage Of Wind Energy By Renewable Methanol Production: Feasibility Analysis Using A Multi-Criteria Decision Matrix, Michael J. Matzen, Mahdi H. Alhajji, Yaşar Demirel

Department of Chemical and Biomolecular Engineering: Faculty Publications

This study is for the technoeconomic analysis of an integral facility consisting of wind energy-based electrolytic hydrogen production, bioethanol-based carbon dioxide capture and compression, and direct methanol synthesis. ASPEN Plus was used to simulate the facility producing 97.01 mt (metric tons) methanol/day using 138.37 mt CO₂/day and 18.56 mt H₂/day. A discounted cash flow diagram for the integral facility is used for the economic analysis at various hydrogen production costs and methanol selling prices. The feasibility analysis is based on a multi-criteria decision matrix consisting of economic and sustainability indicators comparing renewable and non-renewable methanol productions. …

Low Volume Dispensing With High Speed Dispensers, Sunny Agarwal

Graduate Dissertations and Theses

With the high pace of innovation in the semiconductor manufacturing industry, there has been an increasing demand for more energy efficient and environmental friendly products. This research relates to a complex process of fluid dispensing at low volumes on a printed circuit board. Currently, a more refined non-contact dispensing terminology named “Streaming” is widely used to stream out material at low volumes for various applications. The key solution is to frame a dispensing method that lends itself most closely to the requirements of a specific production process.

This study represents a detailed approach of dispensing low volumes of materials in …

Calibration Of Hdm-4 For Use In Pavement Management Systems (Pms), Nurdin Mushule

Tanzania Journal of Engineering and Technology (TJET)

One of major problems of road management in developing countries is the lack of decision making tools for preparing road maintenance programmes. This results in poor resource allocation and poor utilisation of existing assets. Pavement management systems (PMS) have been developed around the world in order to assist with the pavement management process in a co-ordinated and systematic manner. Some developed countries have derived pavement performance models that are suited to local conditions by setting up long term pavement performance studies. Conversely, most developing countries do not have the resources required to set up similar large-scale field experiments. However, validation …

A Systemic Framework For Implementation Of Tqm Programmes, Emanuel Mjema

Tanzania Journal of Engineering and Technology (TJET)

The purpose of this paper is to present a systemic framework for implementation of TQM program in a manufacturing organisation that produces motor vehicle components in Port Elizabeth - South Africa. The approach used included conceptualisation of the systemic framework and then involvement of the stakeholders in adding scenarios to be considered in the design and implementing the framework in the real field. The findings obtained during the implementation of the systemic framework established that reduction of scrap rate, reduction of production costs, reduction of cycle time and employee motivation could be achieved through the implementation of a Systemic Framework …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Degradation Of Waterfront Reinforced Concrete Structures At The Port Of Dar Es Salaam, I Sanga

Tanzania Journal of Engineering and Technology (TJET)

The paper summarises the results of an investigation done on piers at the Dar es Salaam Port. The problem facing these structures and marine facilities is their exposure to aggressive environmental phenomena. The paper presents an investigation of the strength and corrosion of concrete seaport piers so as to determine degradation of the reinforced concrete waterfront structures in the port of Dar es Salaam. For instance the structures at a dhow quay terminal had been in use for about 100 years. The facility was in bad condition as the concrete had been badly damaged due to corrosion. Some of the …

Participatory Evaluation And Improvement Of Cassava Processing Machines For The Eastern Zone Of Tanzania, V Silayo

Tanzania Journal of Engineering and Technology (TJET)

Cassava processing machines previously introduced in Tanzania were chippers and graters of the International Institute Of Tropical Agriculture (IITA) design. Popularization of such machmes in Tanzania required thorough participatory testing with stakeholders. When tested with farmers in Muheza and Kibaha districts average throughputs were 11-18 kg/h, 752 kg/h and 270 kg/hfor the manual chipper, engine-powered chipper and the engine-powered grater, respectively. Despite their low throughputs the manual chipper and the grater were Veo difficult to operate, and therefore demanded improvement. Improvement on these machines included modifications on the design for increased throughput, ease of operation and safety. The improved machines …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …