Operations Research, Systems Engineering and Industrial Engineering Commons^™

High-Dimensional Multi-Objective Optimization Algorithm Based On Large Language Model Assistance, Yichao Ma, Jingxuan Wei

Journal of System Simulation

Abstract: The increase in the dimension of objective functions in optimization problems makes it challenging to balance convergence and diversity in population-based algorithms, which is a key factor leading to performance degradation of multi-objective evolutionary algorithms. To address this issue, a dynamic switching mechanism assisted by a large language model is proposed. By continuously evaluating the changes in hypervolume and convergence metrics of the solution set, the search process is adaptively divided into three phases: convergence-oriented, diversity-oriented, and large language model-suggested phases, achieving precise allocation of computational resources. Furthermore, to mitigate the high computational cost of large language models in …

Modeling, Dynamical Analysis, And Lmplementation Of Switched Memristive Neural Networks, Zhuang Qu, Shaohua Zhang, Cong Wang, Hongli Zhang, Xinkai Li, Ping Ma

Journal of System Simulation

Abstract: To simulate the dynamic functional switching of brain networks, a time-switched memristive Hopfield neural network (TSM-HNN) model is proposed. The model utilizes external time-sequential signals to control memristive synapses, allowing it to dynamically generate multi-scroll chaotic attractors of varying numbers and morphologies without altering the system's structure. This overcomes the limitation of traditional chaotic systems, which can typically only produce a single type of attractor. The model exhibits complex chaotic behavior, high sensitivity to initial conditions, and coexisting attractors. Its physical feasibility has been verified through PSPice circuit simulations. This enhanced complexity and randomness give the model significant potential …

Design And Research Of A Microfocus X-Ray Tube, Haodong Zhao, Shizong Wei, Daolong Yu, Zhixia Liu, Yuezhong Chen, Ji Xu

Journal of System Simulation

Abstract: With the rapid advancement of high-resolution imaging and Micro-nano detection technology, microfocus X-ray sources show great potential for applications in industrial non-destructive testing, biomedical imaging, and material microstructure analysis. Achieving a focal spot size below 10 μm is essential for enhancing spatial resolution. However, traditional X-ray tubes are constrained by heat source dimensions, electron beam divergence, and limited focusing capabilities, which makes it challenging to simultaneously achieve focal spot miniaturization and adequate radiation intensity. In this study, a hot cathode electron gun is modeled using CST particle studio. Simulations are conducted to analyze the influence of the first anode …

Research On Characteristics Of Inclined Jet Flow For Aircraft De-Icing Based On Multiphysics Coupling, Zhiwei Xing, Hongbin Zhang, Ke Sun, Wenliang Miao

Journal of System Simulation

Abstract: To address the complex multiphysics coupling and lack of theoretical guidance for spray parameters in aircraft ground de-icing, a simulation model based on the Phase-Field method and Realizable k-ε turbulence model is proposed to investigate inclined jet flow over airfoil surfaces. The model enables the numerical reconstruction of jet impingement, liquid film flow, and unsteady heat transfer processes, providing a framework to elucidate the regulatory mechanisms of jet angles on momentum distribution and thermal characteristics. The simulation results reveal distinct variations in the flow and heat-transfer characteristics at different jet inclination angles. At a jet angle of 15°, the …

Physics-Driven Efficient Simulation Platform For Warhead-Target Engagement And Damage Assessment, Yidan Cui, Jingyao Ke, Yufeng Zheng, Kun Xue

Journal of System Simulation

Abstract: To address the limitations of incomplete physical modeling, low computational efficiency, fragmented simulation workflows, and insufficient visual immersion in existing damage simulations of fragment warheads, this paper proposes and develops a physics-driven, high-efficiency visualization platform for warhead-target engagement and damage assessment. The platform implements a full-chain, closed-loop simulation framework covering scenario configuration, force-field computation, fragment dispersion, warhead-target intersection, and damage evaluation. A finite element-discrete element (JK2024-06) coupled dynamics framework is established, integrating a detonation model, shell expansion correction, and fragment velocity inheritance to accurately reproduce the complete dynamic process from detonation to dispersion. A three-level acceleration algorithm based on …

Research On Simulation Technology Of Sea Yawing Test For Amphibious Vehicles, Yue Zhong, Wenlong Ji, Shiqi Feng, Feng Xu, Shuangping Ye

Journal of System Simulation

Abstract: Addressing the challenges of achieving extreme operating conditions and understanding the boundary conditions of yaw performance in offshore yaw tests for amphibious vehicles, a heading-flow direction angle mapping analysis method based on computational fluid dynamics (CFD) simulation and a three-dimensional hydrodynamic stratified model is proposed. Under environmental conditions of second-level (wave height of 0.5 m, wind speed of 3.3 m/s) and third-level (wave height of 1.0 m, wind speed of 5.1 m/s) sea states, a hundred-meter yaw test is simulated to reveal the nonlinear evolution law of yaw displacement and heading-flow direction angle. The research indicates that the extreme …

Vibration Characteristics Of Compact Hydraulic System Pipelines Based On Two-Way Fluid- Structure Interaction, Lichen Shi, Xujia Feng, Weitao Dou, Yanyan Li

Journal of System Simulation

Abstract: Amid growing demands for green manufacturing, equipment miniaturization, and high efficiency, compact hydraulic systems are critical in disassembly, assembly, and transport operations due to their high power density and flexibility. However, severe vibration in the pipeline systems significantly compromises equipment reliability. This study investigates the dynamic response mechanism of a compact on-board hydraulic pipeline system, using a specific piece of disassembly and assembly equipment with spatially constrained clamp placement as a case study, through a two-way fluid-structure interaction method, and optimizes the clamp layout. The results show that resonance occurs when the excitation frequency of the hydraulic oil pressure …

Research On Automated Generation Method Of Data-Based Architectural View Products, Kui Wang, Tianrong Gao, Cheng Chen, Mengyin Cui, Ping Wang, Xiaoping Wang, Huaijin Ge

Journal of System Simulation

Abstract: To address the issue of insufficient consistency among view products in the architectural design process, this paper proposes an automatic view product generation method based on the architecture metamodel. To enhance the consistency of view products, the method abandons the traditional post-design verification approach. Instead, it uses the information flow/data flow defined in the metamodel as the benchmark, and through explicit associations among architectural data as well as mapping relationships between view products and data, automatically derives and generates behavioral view products from structural and classificational view products. A prototype tool developed based on this method has been validated …

Research Of Data-Model Integrated Digital Twin-Based Health Intelligent Monitoring For Multi-Stage Centrifugal Compressors, Xiaomo Jiang, Jigang Meng, Huaiyu Hui, Wenqing Meng, Haibin Yang, Huize Chen

Journal of System Simulation

Abstract: To address the challenges of insufficient real-time monitoring capability and weak coupling between physical entities and virtual models in the long-term safe and reliable operation of multi-stage centrifugal compressors under complex operating conditions, this paper proposes a digital twin construction method based on data-model fusion for intelligent health monitoring. A unit-system-component hierarchical virtual twin model is established to achieve the coordinated mapping of geometric structure, operational behavior, and monitoring data of the compressor. By integrating a terminal-edge-cloud collaborative architecture, data-driven models are dynamically coupled with the virtual twin to construct a digital twin-based health monitoring platform, enabling operating state …

Design Of A Simulation Dataset For Fine-Grained Detection Of Space Target Sequence Images, Shiyan Wang, Danpu Zhao, Haikun Hong

Journal of System Simulation

Abstract:

With the increasing number of space objects such as satellites, there is a growing need for fine-grained detection and recognition of distant space targets. However, obtaining real observational data remains difficult due to high costs and insufficient annotation detail. To overcome these limitations, asynthetic dataset generation system based on multi-module collaboration is developed. Using joint simulation with STK and Blender, the proposed system simulates optical imaging conditions of space targets and automatically produces sequential images along with corresponding fine-grained labels. A large-scale simulation dataset is constructed for fine-grained detection in space target image sequences. It contains …

Robotic Digital Twin Modeling Method Integrating Mbse And Modelica, Zaiwu Mei, Jiangman Zhou, Cong Zhang, Yiping Gao, Zerun Zhu

Journal of System Simulation

Abstract: To address the issues of disconnection between system architecture design and dynamic simulation, as well as the limited reusability and scalability of models in robotic digital twin modeling, a modular modeling approach integrating MBSE (model-based systems engineering) and Modelica is proposed. The method employs MBSE for system architecture design and requirement traceability, and combines Modelica for multi-domain dynamic simulation, forming a full-chain digital twin model from system design to physical behavior simulation. Standardized interfaces and a generic component model library are developed to decouple and integrate mechanical, electrical, and control subsystems, enabling rapid model assembly and functional expansion. A …

Modeling And Simulation Of Multi-Hop Routing In 3d Tunnel Wireless Sensor Networks, Fang Cao, Jiguang Yang, Jiuyuan Huo

Journal of System Simulation

Abstract: To address the unbalanced energy consumption and short network lifetime caused by the complex topology and strong energy coupling of three-dimensional tunnel wireless sensor networks, this study constructs a system-level operating model integrating spatial topology, energy evolution, and routing decision-making, and proposes an energy management for balanced and efficient routing (EMBER) algorithm based on the competition of tribes and cooperation of members (CTCM) algorithm. The optimal number of cluster heads is derived through tunnel spatial modeling. Clustering is performed using a Gaussian mixture model optimized by CTCM, and efficient cluster-head selection is achieved by combining data envelopment analysis. An …

Rrt*-Based Robotic Manipulator Path Planning With Artificial Potential Field Guidance And Accumulator-Based Adaptive Adjustment, Fangzheng Gao, Xu Guo, Quan Sun, Jiacai Huang, Zhongcai Zhang

Journal of System Simulation

Abstract: To address the problems of blind sampling, slow convergence, and path redundancy in robotic manipulator path planning in cluttered and unstructured three-dimensional environments, An RRT* algorithm integrating artificial potential field guidance and accumulator-based adaptive adjustment, namely APGA-RRT* (artificial potential field guidance and accumulator adaptive adjustment-RRT*). The proposed algorithm improves the overall planning performance from three aspects: sampling, expansion, and path optimization. In the sampling stage, a potential-field-guided sampling strategy based on target-distance weighting and virtual-target switching is constructed, obstacle suppression and safe-distance gating mechanisms are incorporated to dynamically adjust the guidance intensity, thereby enhancing target directivity and local escape …

Online Fine-Tuning Of Binocular Camera Extrinsic Parameters Based On Position-Iteration Dual Perception, Qian Long, Tuerhong Dilixiati, Qi Zheng, Lijun Shen

Journal of System Simulation

Abstract: In long-term operation of binocular systems, small drifts in extrinsic parameters may occur due to temperature changes, vibration, and mechanical shocks. As these drifts accumulate, the ranging error increases with distance and seriously degrades long-range measurement performance. Because online compensation is difficult, such small drifts are often neglected. To address this problem, an online fine-tuning method based on position-iteration dual perception is proposed. A multiplicative coupling weighting model is established by integrating spatial reliability with an iteration-stage modulation function. A three-stage progressive optimization algorithm is designed to balance convergence speed and robustness. A simulation framework for offline calibration and …

Review Of Evaluation Metrics For The Credibility Of Autonomous Driving Test Scenarios, Jiwei Li, Runmin Wang, Yu Zhu, Jingjun Cheng, Xiangmo Zhao

Journal of System Simulation

Abstract: Currently, scenario-based simulation testing has become a core technical approach for verifying autonomous driving system functionality. However, due to the absence of unified evaluation standards for simulation scenarios, significant differences exist among the metrics constructed and adopted by different studies, each with its own limitations. This hinders mutual recognition of research outcomes and prevents scientific measurement of scenario quality. This study systematically reviews relevant research from the past five years, categorizing autonomous driving test scenarios into four types: parameter-descriptive, trajectory-driven, environment-simulation, and perception-data-driven. It clarifies the core characteristics, application objectives, and generation mechanisms of each scenario type. Subsequently, focusing …

Hybrid Attention For Low-Overlap Point Cloud Registration, Huaijun Wang, Zonghua Yu, Chenxin Xu, Junhuai Li, Chenzhi Li, Junjie Yin

Journal of System Simulation

Abstract: To address the significant registration errors caused by large initial pose deviations in low overlap ratio point cloud, this paper presents a two-stage optimization method that integrates selfattention and cross-attention mechanisms. Orientation feature representation is enhanced using equivariant self-attention, semantic alignment is achieved through invariant cross-attention, and rotational equivariance is modeled with an octahedral group for coarse registration. Various attention variants are employed to aggregate features along the anchor dimension, and a local-to-global module is utilized for fine registration. On the 3DLoMatch dataset, the proposed method achieves a registration recall of 77.0% and an inlier ratio of 44.3%. Even …

Numerical Simulation Study On Flow-Induced Vibration Energy Harvesting Characteristics Of Piezoelectric Energy Harvester With Elliptical Cylinder Bluff-Body, Jiechao Lei, Long Li, Ji Yao

Journal of System Simulation

Abstract: To improve the self-powering efficiency of miniature internet of things devices, this paper establishes a fluid-structure-electric multi-field coupled computational fluid dynamics (CFD) model based on the ANSYS Fluent platform. It conducts a numerical simulation study on the flow-induced vibration energy harvesting characteristics of a piezoelectric cantilever beam energy harvester with an elliptical cylinder bluff-body. A systematic analysis is performed on the influence mechanism of flow velocity within the range of 0.1~0.5 m/s on the output power. The results indicate that the output power of the harvester exhibits phased growth with increasing flow velocity. In the range below 0.15 m/s, …

Urban Spatial Development Control In Tanzania: Analysis Of Factors Influencing Gis Application Using Structural Equation Modelling (Sem)., Happiness Protas Mmanda, Nestory Yamungu

Tanzania Journal of Engineering and Technology (TJET)

Rapid urbanization in developing countries has intensified urban expansion, creating challenges for sustainable development. Geographic Information Systems (GIS) enhance spatial planning, but empirical evidence on factors influencing their effectiveness remains limited. This study examines determinants of GIS application in Urban Spatial Development Control (USDC). The objectives are to (1) identify and categorize factors affecting GIS use, (2) assess relative strength, and (3) develop a validated structural model explaining GIS adoption in USDC. Data were collected from 103 LGAs by a mixed sampling method. Exploratory and Confirmatory Factor Analysis classified influencing factors into technology-related (α = 0.869, CR = 0.881), process-related …

Decision Support Tool For The Maintenance Of Meter Gauge Railway Permanent-Way Infrastructures: A Concept Paper, Hamisi J. Maulid, Beatus A.T Kundi, Juma M. Matindana, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

A Decision Support Tool (DST) represents a transformative way of modernising maintenance practice on the permanent-way infrastructure of Meter Gauge Railway (MGR). Maintenance practice remains largely reactive, as the MGR plays a strategic role in transporting both freight and passengers, resulting in inefficient resource allocation, high operational risk, and growing Lifecycle expenses. This concept paper explores the potential and the design challenges for a DST that combines fuzzy analytic hierarchy process (Fuzzy-AHP) modelling, multi-criteria decision analysis (MCDA), Geographic Information Systems (GIS) and predictive machine learning (ML) analytics for evidence-based, future-oriented maintenance management. The paper draws on peer-reviewed studies from …

Individualized Bayesian Inference Identifies Novel Genetic Variants For Parkinson's Disease, Jin Ren, Yasaman J. Soofi, Md Asad Rahman, Qing Lu, Jinling Liu

Engineering Management and Systems Engineering Faculty Research & Creative Works

Parkinson's disease (PD) is a complex neurodegenerative disorder with a significant genetic component. While genome-wide association studies (GWAS) have been instrumental in identifying genetic variants associated with PD, the reliance on large sample sizes and population-level analyses may overlook variants with lower minor allele frequencies or individual-specific relevance. Individualized Bayesian Inference (IBI) offers a promising method to complement GWAS by identifying and prioritizing candidate genetic markers at both the individual and patients-like-me subgroup levels. This study evaluates the application of IBI to PD genetics, using GWAS as a baseline for comparison. We analyzed genetic data from the Fox Insight online …

Nonlinear System Identification Based On Fuzzy Radial Basis Neural Network With Multi-Connected Weight Connections, Kabul Khudaybergenov

Chemical Technology, Control and Management

This paper builds on our earlier radial basis function network with multiple connections (RBFMC) by placing it within a fuzzy inference framework for nonlinear system identification. The idea is inspired by the diversity of neurotransmitters found in biological neurons: instead of a single hidden-to-output weight, RBFMC gives each hidden unit a multi-dimensional connection whose components act as independent filters. Once fuzzy logic is added, each hidden neuron becomes a fuzzy rule, and its antecedent is built from several Gaussian membership functions, one per connection. The resulting Fuzzy RBFMC produces an interpretable, multi-filter description of local regions of the input space …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

High Tempo Air Operations, Joseph Lipson, Brennan Flanagan, Trevor Sterbens, Brandon Godfrey, Jeremiah Sepich

Discovery Day - Daytona Beach

Aircraft carrier flight decks are one of the most dangerous work environments in the world, where dozens of aircraft must be moved, fueled, and armed within strict time limits. Currently, Flight Deck Handling Officers track aircraft positions using a physical board with wooden pucks that can be knocked out of place or become outdated during fast-moving operations. This study looks at whether using AI tools helps people design a better digital version of this tracking system. Participants with little design experience were randomly selected and then randomly assigned to one of two groups — one that could use AI tools …

Humans Vs. Ai: Comparing Approaches To Disaster Response Interface Design, Kelly Nguyen, Olivia Hartmann, Kailey Hrbek, Madeline Nees, Gabrielle Roth, Emily Silliman

Discovery Day - Daytona Beach

Amphibious emergency support operations involve rapidly changing information, high stress, and significant cognitive demands, which can make decision-making and situation awareness more difficult for operators. When interfaces are poorly designed, they can contribute to issues such as alarm flooding, confusion from incomplete information, and delayed responses, all of which increase operational risk during time-critical disaster situations. This study explores whether using generative AI to assist with interface design will improve performance (output quality and effort) and usability compared to a manual sketch mock-up. Participants were asked to design a dashboard interface to support disaster relief operations following a Category 5 …

Optimization Of Engine, Jordan Reed, Dev Shah

Discovery Day - Daytona Beach

A matrix-based framework for modeling and optimizing fluid and gas in feed systems to pressurize for propulsion applications using advanced linear algebra techniques will be used in this project. The governing equations are derived from conservation of mass, momentum, and energy and are formulated in state space form. This enables the system to be expressed as a set of coupled linear differential equations. These equations are assembled into structured system matrices that show the interactions between pressure, flow rate, and component dynamics. This representation allows for numerical implementation and scalability to complex systems with multiple components. System behavior is analyzed …

Emergency Risk Dispatch For Integrated Electricity-Heat Systems Under Typhoon Disasters, Tongchui Liu, Lian Tan, Dongxuan Bao, Lanting Zeng, Pengfei Hou, Ronghua Ling

Journal of System Simulation

Abstract: The spatiotemporal randomness of typhoon movement paths leads to uncertain operational risks for integrated electricity-heat systems (IEHS), making it difficult to balance system risk controllability and dispatch economy. To tackle this problem, an emergency risk dispatch (ERD) method for IEHS under typhoon disasters is proposed. An ERD model for IEHS under typhoon disasters is established within the model predictive control framework. Based on the uncertainty of typhoon wind speed prediction, a moment-based ambiguity set for uncertain equipment component failures is constructed, and a distributionally robust chance-constrained ERD model is formulated. An approximation method based on worst-case conditional value-at-risk (WC-CVaR) …

Bi-Level Coordinated Scheduling And Optimization Of Power Systems Based On Stackelberg-Gmo, Yuanxing Zhang, Jianfeng Li, Taoyong Li, Linjuan Zhang, Jincheng Liu, Bin Li

Journal of System Simulation

Abstract: , To balance the interests of the power grid and the demand side, and achieve coordinated improvements in system economic efficiency, environmental friendliness, and renewable energy accommodation capacity, this paper proposes a bi-level coordinated scheduling model based on the Stackelberg game and the GMO. A leader-follower game model incorporating carbon emission constraints and multi-scenario stochastic constraints for photovoltaic generation is constructed, with the grid operator as the leader and EVs/V2G and energy storage as the followers, resolving the core contradiction between global optimization and individual rationality. The spatio-temporal stochastic characteristics of EV travel, the cycle life of energy storage …

Energy Management Method For Integrated Energy Driven By Users’ Social Attributes, Yankai Zhu, Yujing Huang, Qinghua Wang, Xiaoning Zhang, Fang Fang, Yuguang Niu

Journal of System Simulation

Abstract: To explore a new interaction mechanism between an energy service provider (ESP) and multiple users, this paper proposes a complex modeling and energy management method for integrated energy systems driven by users' social attributes. A multi-agent interaction framework comprising an ESP and user clusters is established. To maximize the ESP's operational benefit and minimize users' energy costs, a leader-follower game-based energy management model is established within a reinforcement learning framework, and a distributed collaborative solution algorithm combining Q-learning and quadratic programming is proposed. Simulation results show that, compared with the traditional integrated demand response method, consideration of users' social …