Operations Research, Systems Engineering and Industrial Engineering Commons^™

Implementing Rfid To Improve Animal Shelter Inventory And Allocation, Adam Mach

Industrial and Manufacturing Engineering

The purpose of this project is to observe the best way to incorporate Radio Frequency Identification (RFID) technology into the animal inventory system present in animal shelters, while also observing the benefits of implementing this system. The Woods Humane Society was used in this project as a sample animal care facility that could benefit from this application.

Many RFID systems can be observed in other industries, but very few examples this technology exist in animal shelters or smaller animal care facilities. Part of the reason for that is because funds are scarce at most animal care facilities, like the Woods …

Simulation Model To Investigate Flexible Workload Management For Healthcare And Servicescape Environment, Michael Thorwarth, Paul Harper, Amr Arisha

Conference papers

High demand and poor staffing conditions cause avoidable pressure and stress among healthcare personnel which results in burnout symptoms and unplanned absenteeism which are hidden cost drivers. The work environment within an emergency department is commonly arranged in a flexible workload which is highly dynamic and complex for the outside observer. Using detailed simulation modeling within structured modeling methods, a comprehensive model to characterize the nurses' time utilization in such flexible dynamic workload environment was investigated. The results have been used to derive a generalized analytic expression that describes certain settings that lead to an instable queuing system with serious …

Analysis And Selection Of New Rental Paintball Masks For Gladiator Paintball Park, Geoff Wakefield

Industrial and Manufacturing Engineering

This project is designed to select new rental paintball masks for Gladiator Paintball Park. The currently used rental masks are worn down and need replacement. Criteria for new rental masks are examined and include customer preferences, owner's constraints, and time studies. Candidate masks were found by asking customers what they like in rental masks, interviewing other paintball field owners, and referring to the online paintball community. Three candidate masks were found, the V-Force Vantage, JT Alpha, and Kingman java paintball masks. These masks were compared to the currently used rental masks, the V-Force Armor. Customers were surveyed to find out …

Acs Custom Creation's New Business And Assembly Operations, Kent Christensen

Industrial and Manufacturing Engineering

ACS Custom Creations had assembly and business operations that wasted time and wasted money. The objective of the project is to improve and implement ACS Custom Creations business and manufacturing operations. The proposed assembly process involves the rearranging of the bottlenecked steps to eliminate constraints. The assembly workstations were also redesigned to reduce cycle time. With the improvement of the new assembly and business operations, ACS is poised to grow into a bigger company. Financial Statements were created to improve visibility of the company’s historical data. These financial statements include an income statement, balance sheet, and a cash flow statement. …

Solder Qwik Pentm, Katherine E. Robbins

Industrial and Manufacturing Engineering

Electronics soldering is a technique used frequently in the manufacturing of Printed

Circuit Boards (PCB) to attach small electronic parts or wires together. Often times

the need to remove a solder joint arises; this is known as desoldering. Solder wick,

fine braided copper wire infused with rosin, is one of the most effective ways to

desolder because it results in the cleanest joints. Currently using solder wick

involves several time consuming and somewhat awkward steps. This report will

cover the process behind designing, manufacturing, and testing a new ergonomic,

dispenser for solder wick that can be used with one hand. …

The Root Causes Of Errant Ordered Radiology Exams, Benjamin Duman

Boise State University Theses and Dissertations

The purpose of this research was to determine why there was a high number of errant radiology orders from requesting physicians at ATA Hospital. As the researcher, I wanted to clearly define errant orders, determine the root causes of errant orders, and further, make recommendations that would help diminish current as well as future order errors. This study answers three research questions: RQ1. Exactly what are the performance problems associated with errant orders within ATA Hospital’s radiology department that warrant further research? RQ2. What causes the increase in errant radiological orders at ATA Hospital? And, RQ3. What types of performance …

Course Portfolio - Discrete Event Simulation, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

This course portfolio, written by Dr. Paul Savory, provides an overview of his Discrete Event Simulation course at the University of Nebraska-Lincoln. It offers an overview of the course goals, a summary of the classroom activities for achieving them, and a detailed assessment of student learning. He highlights his introduction of the simul8 programming environment to his students. In addition to exploring his students’ learning, Dr. Savory also explores different approaches for documenting his teaching by including multimedia clips (video and audio), uses graphs, uses color, and incorporates images. The resulting portfolio is one that can be reviewed, shared, and …

Enabling Rfid Technology In Irish Hospitals, Khaled Ismail, Amr Arisha

Conference papers

Hospitals represent a significant part of healthcare systems and account for no less than 60% of the entire healthcare service in most of developed countries. Therefore, improving service in hospitals is an important element to the process of healthcare reform. Better use of resources, more consistent quality, and a higher service level are the keys to rationalise the huge expenditure in healthcare systems due to higher growth in demand. Even though massive spending has been directed towards hospital improvement in Ireland, services provided in Irish hospitals are ranked relatively low comparing to the other European countries. Growth of population, aging, …

Risk Assessment Model For Emergency Departments In Dublin Hospitals, Michael Thorwarth, Amr Arisha

Conference papers

The internal dynamics of emergency departments (ED) in Irish hospitals represent complex non-linear stochastic systems with an environment of uncertainty, variability and limited resources. Planning and managing such systems pose overwhelming demands. To improve operations, patient service, resource planning, and real-time reaction to unexpected events, sophisticated tools to efficiently achieve these goals must be applied.

Advanced solution techniques (e.g. simulation and optimisation) have been successfully applied in manufacturing operations to improve the delivery, cost-effectiveness and service quality. Yet, random arrival of patients, limited resources and multitasking are challenges in EDs that add more complexity to this critical area. This study …

Optimisation Methods In Supply Chain Applications: A Review, Amr Arisha, Waleed Abo Hamad

Conference papers

The competitiveness and dynamic nature of today’s marketplace is due to rapid advances in information technology, short product life cycles and the continuing trend in global outsourcing. Managing the resulting supply chain networks effectively is a complex and challenging task which is imputable to high level of uncertainty in supply-demand, conflict objectives, vagueness of information, numerous decision variables and constraints. With such level of complexity in the environment, supply chain optimisation has a potential to make a significant contribution to resolve the challenges. In this paper, a literature review – based on more than one hundred peer-reviewed articles – of …

Synthesis, Interdiction, And Protection Of Layered Networks, Kevin T. Kennedy

Theses and Dissertations

This research developed the foundation, theory, and framework for a set of analysis techniques to assist decision makers in analyzing questions regarding the synthesis, interdiction, and protection of infrastructure networks. This includes extension of traditional network interdiction to directly model nodal interdiction; new techniques to identify potential targets in social networks based on extensions of shortest path network interdiction; extension of traditional network interdiction to include layered network formulations; and develops models/techniques to design robust layered networks while considering trade-offs with cost. These approaches identify the maximum protection/disruption possible across layered networks with limited resources, find the most robust layered …

Developing A Tool For The Location Optimization Of The Alert Aircraft With Changing Threat Anticipation, Okan Arslan

Theses and Dissertations

The threat to the airspace is posed by the outside world in conventional terms as well as hostilities from within the airspace such as hijacked aircraft. Alert aircraft are located with the sole responsibility of responding to any incident. Different regions of the airspace may have different alert states depending on current intelligence input. Due to non-constant states of threat level, the Turkish Air Force must deploy aircraft to cover the more sensitive regions with a greater number of aircraft with a relatively short response time. This research deals with the problem by developing a tool for the location optimization …

Using Multiple Robust Parameter Design Techniques To Improve Hyperspectral Anomaly Detection Algorithm Performance, Matthew T. Davis

Theses and Dissertations

Detecting and identifying objects of interest is the goal of all remote sensing. New advances, specifically in hyperspectral imaging technology have provided the analyst with immense amounts of data requiring evaluation. Several filtering techniques or anomaly detection algorithms have been proposed. However, most new algorithms are insufficiently verified to be robust to the broad range of hyperspectral data being made available. One such algorithm, AutoGAD, is tested here via two separate robust parameter design techniques to determine optimal parameters for consistent performance on a range of data with large attribute variances. Additionally, the results of the two techniques are compared …

A Hybrid Templated-Based Composite Classification System, Michael A. Turnbaugh

Theses and Dissertations

An automatic target classification system contains a classifier which reads a feature as an input and outputs a class label. Typically, the feature is a vector of real numbers. Other features can be non-numeric, such as a string of symbols or alphabets. One method of improving the performance of an automatic classification system is through combining two or more independent classifiers that are complementary in nature. Complementary classifiers are observed by finding an optimal method for partitioning the problem space. For example, the individual classifiers may operate to identify specific objects. Another method may be to use classifiers that operate …

Design Of An 8-Channel Data Acquisition System For Measuring Diode Junction Temperature, Jason Maynard

Industrial and Manufacturing Engineering

The solid state lighting industry is striving to expand the use of light emitting diodes (LEDs) in more applications, particularly in high brightness applications. As the power of LEDs increase, heat removal becomes a critical issue. To improve device lifetime, quantum efficiency, and LED colour, the diode p-n junction temperature (Tj) must be kept to a minimum. Measuring this key parameter is difficult or impossible with direct methods, such as thermocouples and infrared cameras, due to the small size of LEDs. Fortunately, junction temperature can be measured indirectly by using a relationship between the diode forward voltage (Vf) and junction …

A Decision Support System For Capacity Management, Anton Slobodnik

Industrial and Manufacturing Engineering

Every manufacturer faces the challenge of managing production capacity. How effectively a company meets required capacity as compared to competitors will be a determinant of profitability and success.

This paper details the creation of a best of breed software that can act as a decision support system and help planners reschedule work, add shifts and make sure that the master production schedule is feasible before putting it into an MRP system.

As a part of my senior project I’ve created a Rough-Cut Capacity Tool that takes lead time into account and performs basic what if analysis on level loading a …

Rubric For Presentation Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow classmates and myself to offer an evaluation or assessment of a student classroom presentation. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Report Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to formalize the evaluation or assessment of a project report. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Rubric For Project Self-Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow each member of a project team to offer a self-assessment of their own performance on the projects. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Ruberic For Project Team Member Evaluation, Paul Savory

Department of Industrial and Management Systems Engineering: Instructional Materials

I have developed this rubric to allow team members for course projects to offer an evaluation or assessment of the fellow members of their team. It is my attempt to develop a standardized evaluation linked to specified criteria, making the grading process simpler and more transparent.

Optimization Of Lifeguard Towers, Equipment, And Sign Placement With Human Factors Considerations For The Cal Poly Recreation Center Expansion, Brian J. Henrikson

Industrial and Manufacturing Engineering

Cal Poly’s Recreation Center serves many faculty, students and alumni by providing them with a safe and fun environment to work out and swim. An overwhelming majority of students voted for a Recreation Center expansion to handle the increased usage of the Center over the past few years. The focus of this report is the safe and effective operations of the pool deck and the lifeguard staff. Three surveys were created to see what the lifeguard staff, as well as pool users, thought about the current pool deck and what they would like to see in the new pool deck …

Interoperability Measurement, Thomas C. Ford

Theses and Dissertations

This research presents an inaugural general method of measuring the collaborative and confrontational interoperability of a heterogeneous set of systems in the context of an operational process. The method is holistic, fundamental, flexible, and mathematical in nature and accommodates all types of systems and interoperations. The method relates the interoperability measurement to measures of operational effectiveness for confrontational operational processes. Extant leveling methods of describing interoperability are shown to be a special case of the more general method given in this research and the general interoperability measurement method is demonstrated through the presentation of coalition interoperability, suppression of enemy air …

Randomly Generating Manufacturing Flow Line Models Using Mathematica, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

To test heuristic algorithms and techniques, researchers need numerous datasets so as to measure effectiveness and improve approaches. This paper discusses using Mathematica, a mathematical programming language, for randomly generating the specifications for manufacturing flow line models. Important issues include determining an arrival rate to a flow line, the number of flow line stations, the number of parallel servers for each production station, and specifying the service time distributions and their associated parameters. The paper concludes with a discussion on generating more general types of simulation models.

Neural Network Models For Solving The Maximum Flow Problem, S. Effati, M. Ranjbar

Applications and Applied Mathematics: An International Journal (AAM)

In this paper, two new neural network models for solving the maximum flow problem are presented. The maximum flow problem in networks is formulated as a special type of linear programming problem and it is solved by appropriately defined neural networks. The nonlinear neural networks are able to generate optimal solution for maximum flow problem. We solve neural network models by one of the numerical method. Finally, some numerical examples are provided for the sake of illustration.

Simulation Of Multicultural Factors In Terrorism Networks, Jared Townsley

Industrial Engineering Undergraduate Honors Theses

As globalization extends its influence to the far corners of the world, rapid developments and changes are taking place economically, socially, and environmentally. Cultural differences between and within organizations have become significant during the past few years as politics and marketplaces expand globally to include multiple nationalities, beliefs, and value systems. Unfortunately, terrorism has also felt the effects of globalization as organizations such as Al-Qaeda seek to expand their influence worldwide. Although a considerable amount of research has been conducted to identify key cultural factors that play major roles within organizations, simulation models that attempt to quantify cultural effects are …

A Multi-Objective Linear Program Model To Test Hub-And-Spoke Networks As A Potential Air Force Deployment Alternative, Andrew J. Cullen

Theses and Dissertations

The purpose of this research is to develop a multiple-objective mixed-integer linear programming model that determines the feasibility of a new deployment paradigm, which offers greater flexibility to home station and deployed location civil engineers (CE) by applying hub-and-spoke networking. The research covers the histories of CE and Air and Space Expeditionary Force (AEF), current CE deployment needs, multiple-objective decision analysis, hub-and-spoke networking, and organizational behavior benefits of the new paradigm. The methodology section provides details on each objective, explains the model, defines weights, and explains the objective function’s calculation. Next, an analysis of the model’s resulting scenarios helps determine …

Hyperspectral Imagery Target Detection Using Improved Anomaly Detection And Signature Matching Methods, Timothy E. Smetek

Theses and Dissertations

This research extends the field of hyperspectral target detection by developing autonomous anomaly detection and signature matching methodologies that reduce false alarms relative to existing benchmark detectors, and are practical for use in an operational environment. The proposed anomaly detection methodology adapts multivariate outlier detection algorithms for use with hyperspectral datasets containing tens of thousands of non-homogeneous, high-dimensional spectral signatures. In so doing, the limitations of existing, non-robust, anomaly detectors are identified, an autonomous clustering methodology is developed to divide an image into homogeneous background materials, and competing multivariate outlier detection methods are evaluated for their ability to uncover hyperspectral …

Feasibility Study Of Variance Reduction In The Logistics Composite Model, George P. Cole Iii

Theses and Dissertations

The Logistics Composite Model (LCOM) is a stochastic, discrete-event simulation that relies on probabilities and random number generators to model scenarios in a maintenance unit and estimate optimal manpower levels through an iterative process. Models such as LCOM involving pseudo-random numbers inevitably have a variance associated with the output of the model for each run, and the output is actually a range of estimates. The reduction of the variance in the results of the model can be costly in the form of time for multiple replications. The alternative is a range of estimates that is too wide to realistically apply …

Internet Protocol Geolocation: Development Of A Delay-Based Hybrid Methodology For Locating The Geographic Location Of A Network Node, John M. Roehl

Theses and Dissertations

Internet Protocol Geolocation (IP Geolocation), the process of determining the approximate geographic location of an IP addressable node, has proven useful in a wide variety of commercial applications. Commercial applications of IP Geolocation include market research, redirection for performance enhancement, restricting content, and combating fraud. The potential for military applications include securing remote access via geographic authentication, intelligence collection, and cyber attack attribution. IP Geolocation methods can be divided into three basic categories based upon what information is used to determine the geographic location of the given IP address: 1) Information contained in databases, 2) information that is leaked during …

Beyond Passswords: Usage And Policy Transformation, Alan S. Alsop

Theses and Dissertations

The purpose of this research is to determine whether the transition to a two-factor authentication system is more secure than a system that relied only on what users “know” for authentication. While we found that factors that made passwords inherently vulnerable did not transfer to the PIN portion of a two-factor authentication system, we did find significant problems relating to usability, worker productivity, and the loss and theft of smart cards. The new authentication method has disrupted our ability to stay connected to ongoing mission issues, forced some installations to cut off remote access for their users and in one …