Operations Research, Systems Engineering and Industrial Engineering Commons^™

The Impact Of Learning Curve Model Selection And Criteria For Cost Estimation Accuracy In The Dod, Candace Honious, Brandon Johnson, John J. Elshaw, A. B. Badiru

Faculty Publications

The first part of this manuscript examines the impact of configuration changes to the learning curve when implemented during production. This research is a study on the impact to the learning curve slope when production is continuous but a configuration change occurs. Analysis discovered the learning curve slope after a configuration change is different from the stable learning curve slope pre-configuration change. The newly configured units were statistically different from previous units. This supports that the new configuration should be estimated with a new learning curve equation. The research also discovered the post-configuration slope is always steeper than the stable …

Safety Management Analysis For Construction Industry: Statistical Process Control (Spc) Approach, Zhenpeng Liu

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Business and Technology Morehead State University in Partial Fulfillment of the Requirements for the Degree Master of Science by Zhenpeng Liu on April 26, 2016.

Multi-Level Analytic Network Process Model To Mitigate Supply Chain Disruptions In Disaster Recovery Planning, Martina Ursula Kroener

Master's Theses

Over the past few decades, environmental changes have led to more frequent occurrences and greater intensities of natural disasters worldwide. In terms of globally connected supply chains, this has resulted in an enormous economical loss for corporations. Therefore, Business Continuity and Disaster Recovery (BC/DR) planning and management has become essential for businesses in order to protect their critical business flow. Yet there is a lack of systematic and transparent methodologies for companies to handle this problem.

Hence, this thesis introduces a novel approach to combine consecutive steps of the Disaster Recovery Planning (DRP) process within one application. The multi-criteria decision-making …

Optimizing Forecasting Methods For Ustranscom Railcar Demands, James M. Park

Theses and Dissertations

The United States military heavily relies on rail freight operations to meet many of its logistical needs during both peacetime and wartime efforts. As the head organization responsible for managing and overseeing all modes of military transportation, United States Transportation Command depends on timely accurate railcar demand forecasts to drive critical decisions on distribution and placement of railcar assets. However, the intermittent nature of railcar demands based on location and commodity make it a challenging task for forecasters. Furthermore, these “lumpy” demands often come without any obvious trends or seasonality. This study explores the utility of both traditional forecasting methods …

Logistics Simulation For Long Duration Logistics Wargames, Kevin R. Cardenas

Theses and Dissertations

Wargames were originally created to test wartime strategies against opposing forces within a short time frame. Due to the short duration design of these wargames, logistics were deemed irrelevant and it was incorrectly assumed that the warfighter would be logistically supported for the entire duration of the wargame. The purpose of this thesis is to provide insight to the value of capturing logistics within a wargame and to better model the increased requirement for Agile Combat Support. This research utilizes a logistics simulation tool and its outputs to conduct statistical analyses comparing a baseline scenario created to mirror the Joint …

Antecedents Of Fuel Efficiency, James A. Cotton

Theses and Dissertations

Reducing the United States Air Force (USAF)’s fuel use is a major budgetary concern, as the USAF consumes more fuel than the Army, Navy, Marine Corps and all other Department of Defense (DoD) agencies combined. This research focused on fuel efficiency of C-130 Hercules Aircraft Commanders (ACs) by proposing, constructing, and testing a survey measure of behavioral drivers of discretionary pro-environmental professional behaviors among USAF pilots.

Simulation Of Modeling Sortie Generation Process In Turaf, Bahadir Aykiri

Theses and Dissertations

Simulation is a useful technique for engineers and operations researchers. One of the primary advantages of simulation models is that they are able to provide users with practical feedback when analyzing real-world systems. This thesis builds a discrete event simulation of the sortıe generatıon process, to help decision makers in performing analyses regarding quantity of manpower, bottlenecks in supply and maintenance activities; as well as utilization of maintenance manpower, cost and number of sorties produced in a specific time. We only model one aircraft system with four Line Replacement Units (LRU), but any system and its LRUs can be included …

A "Big Bang" Versus A "Small Bang" Approach: A Case Study Of The Expeditionary Combat Support System (Ecss) And The Maintenance, Repair, And Overhaul Initiative (Mroi), George B. Lafiguera

Theses and Dissertations

In 2003, the United States Air Force embarked on one of the largest and most comprehensive logistical transformation to delineate the logistics community’s strategy for supporting the warfighter. A key aspect of this campaign plan was to leverage information technology through an enterprise resource planning (ERP) solution called the Expeditionary Combat Support System (ECSS), a “big-bang” approach. In early 2012, the ECSS program was cancelled mainly due to uncontrollable increases in costs and schedule overruns. In late 2012, the Air Force Sustainment Center (AFSC) launched the Maintenance, Repair, and Overhaul initiative (MROi), a “small-bang” approach, to increase enterprise visibility and …

Using Multiple Objective Decision Analysis To Position Federal Product And Service Codes Within The Kraljic Portfolio Matrix, Robert T. Montgomery

Theses and Dissertations

Despite the best efforts of the Federal Government to implement strategic sourcing, recent Government Accountability Office (GAO) reports highlight major procurement deficiencies and encourage the use of commercial best practices to identify and reap substantial savings. The Kraljic Portfolio Matrix (KPM) is considered the premier tool for purchasing organizations to determine which commercial best practices to utilize for different categories of spend. However, critics of the KPM point to its lack of analytical rigor and the absence of a simplistic quantitative methodology for implementation. The Air Force Installation Contracting Agency (AFICA), the centralized procurement arm for 79 USAF installations worldwide, …

Modeling The Components Of An Economy As A Complex Adaptive System, Richard J. Mickelsen

Theses and Dissertations

Complex systems science is a relatively new discipline and has not been widely applied to the field of economics. Much of current economic theory relies on principles of constrained optimization and often fails to see economic variables as part of an interconnected network. While tools for forecasting economic indicators are based primarily on autoregressive techniques, these techniques are not always well-suited to predicting the future performance of highly volatile data sets such as the stock market. This research portrays the stock market as one component of a networked system of economic variables, with the federal funds rate acting as an …

A Logistic Regression And Markov Chain Model For The Prediction Of Nation-State Violent Conflicts And Transitions, Nicholas Shallcross

Theses and Dissertations

Using open source data, this research formulates and constructs a suite of statistical models that predict future transitions into and out of violent conflict and forecasts the regional and global incidences of violent conflict over a ten-year time horizon. A total of thirty predictor variables are tested and evaluated for inclusion in twelve conditional logistic regression models, which calculate the probability that a nation will transition from its current conflict state, either In Conflict or Not in Conflict, to a new state in the following year. These probabilities are then used to construct a series of nation-specific Markov chain models …

Application Of Smart Factory Design In Nuclear Energy Industry With Focus On Safety, Olivia Crasta, Cem Yilmaz

Engagement & Service-Learning Summit

No abstract provided.

Automatic Food Expiration Notification System, Nikolas-Viktor P. Doukas, Ozan Celebi, Lindsey E. Colgrove, Michael D. Werner, Tre Commings, Christopher M. Zatek, Daniel E. Odihi

Engagement & Service-Learning Summit

No abstract provided.

The Bakken Goes Boom: Oil And The Changing Geographies Of Western North Dakota, William Caraher, Kyle Conway

Digital Press Books

In 2008, the Bakken went boom. Thanks to advances in hydraulic fracturing, oil production in western North Dakota exploded. As the price of oil went up, so did the oil rigs. People came from all over the country (and the world) in search of work, and cities and towns struggled to keep up. This book is about the challenges they faced. It is about the human dimensions of the boom, as told by artists, poets, journalists, and scholars. It captures the boom at its peak, before the price of oil fell and the boom went bust.

This is the only …

A Five-Year Performance Review Of Field-Scale, Slow-Release Permanganate Candles With Recommendations For Second-Generation Improvements, Mark Christenson, Ann Kambhu, James Reece, Steve D. Comfort, Laurie Brunner

Nebraska Water Center: Faculty Publications

In 2009, we identified a TCE plume at an abandoned landfill that was located in a low permeable siltyclay aquifer. To treat the TCE, we manufactured slow-release potassium permanganate cylinders (oxidant candles) that had diameters of either 5.1 or 7.6 cm and were 91.4 cm long. In 2010, we compared two methods of candle installation by inserting equal masses of the oxidant candles (7.6-cm vs 5.1-cm dia). The 5.1-cm dia candles were inserted with direct-push rods while the 7.6-cm candles were housed in screens and lowered into 10 permanent wells. Since installation, the 7.6-cm oxidant candles have been refurbished approximately …

Exploratory Study Of The Adoption And Use Of The Smartphone Technology In Emerging Regions: Case Of Saudi Arabia, Fahad Abdulaziz Aldhaban

Dissertations and Theses

Users' acceptance of a new information technology (IT) is considered to be a key determinant factor of its success. Also, studying users' adoption and use of new IT plays an important role in determining users' needs and reducing business risk, especially in industry segments with rapid changes in IT such as Smartphone technology. Such rapid evolution is influencing consumers' behaviors, their daily lifestyle, the manner of conducting their activities and their ways of consuming and using information.

Smartphone technology holds a promising future with an expected global market that could reach US $258 billion by the end of year 2015 …

Process Improvement By Lean Thinking In Trucking Industry, Abhiram Reddy Ramasahayam

All Graduate Theses, Dissertations, and Other Capstone Projects

Manufacturing industries with complex production systems are struggling with designing optimal process to increase throughput. Companies will require high amount of labor and process improvement resources to sustain growth and delivery quality products to its customers. A chain of value added activities when designed and deployed with help of lean based methodologies can create high efficiency process. In this paper we have studies and implemented value added process based on the lean manufacturing methodologies which was adapted on the shop floor.

In many traditional truck body production industries have facing many problems like low production rate, big lead times, material …

Pre-Mission Input Requirements To Enable Successful Sample Collection By A Remote Field/Eva Team, Barbara A. Cohen, Darlene S. S. Lim, Kelsey E. Young, Anna Brunner, Richard C. Elphic, Audrey Horne, Mary C. Kerrigan, Gordon O. Osinski, John R. Skok, Steven W. Squyres, David Saint-Jacques, Jennifer L. Heldmann

Journal of Human Performance in Extreme Environments

We used a field excursion to the West Clearwater Lake Impact structure as an opportunity to test factors that contribute to the decisions a remote field team (for example, astronauts conducting extravehicular activities (EVA) on planetary surfaces) makes while collecting samples for return to Earth. We found that detailed background on the analytical purpose of the samples, provided to the field team, enables them to identify and collect samples that meet specific analytical objectives. However, such samples are not always identifiable during field reconnaissance activities, and may only be recognized after outcrop characterization and interpretation by crew and/or science team …

Underwater Rope Fatigue Testing Machine, Napoleon Nino, Andrew Pimentel

Mechanical Engineering

The design and fabrication of an underwater rope fatigue testing machine meant to simulate the effects of an oceanic environment and the effects on rope.

Sub-Orbital Spaceflight – An Addition To Our Multi-Modal Transportation System, Scott Haeffelin

Space Traffic Management Conference

The number of commercial spaceflights will be increasing by orders of magnitude over the next several decades. The current volume of space traffic can be managed on a case-by-case basis and there is little impact to the National Airspace System (NAS). This will change as more spaceports become operational, commercial sub-orbital flight companies begin serving their customers and as the cost of these flights begin to decrease. Current regulatory paths seek to allow the flexibility in the regulations for this industry to flourish while also maintaining a high standard of safety. There are, however, many nearsighted and old fashioned assumptions …

Agv Controlled Fms, Fergus G. Maughan

The ITB Journal

One of the key factors that prevent the implementation of Flexible Manufacturing Systems (FMS) is the elaborate cost associated with the control software. In a FMS there is often a wide range of equipment such as personal computers Programmable Logical Controllers (PLCs), CNC Machines or robots, each of these having their own “intelligence” and library of data. Providing a means of communication between these individual controllers has traditionally been achieved using a Local Area Network (LAN). This proves more expensive when traditional manual operated machines have to be integrated into the system. The model described in this paper provides an …

Modified Atmosphere Packaging: A Progressive Technology For Shelf-Life Extension Of Fruits And Vegetables, Mahmoud Soltani, Reza Alimardani, Hossein Mobli, Seyed Saeid Mohtasebi

Journal of Applied Packaging Research

Packaging and storage are the final phases in the food industry. Quality preservation, improving safety and reduction of postharvest losses waste are some objectives of the packaging engineering. One of techniques that widely used in packaging of fruits and vegetables are modified atmosphere packaging (MAP). In MAP for fresh fruits and vegetable the air of packaging headspace replaces with a predetermined atmospheric gases different in proportion from that of air. Oxygen, carbon dioxide and nitrogen are the main gases used in MAP for injection to the headspace of pack. The choice and ratio of gases are very dependent upon the …

The Application Of Gage R&R Analysis In S Six Sigma Case Of Improving And Optimizing An Automotive Die Casting Product’S Measurement System, Qizheng Ren

Masters Theses & Specialist Projects

With the rapid development of automation technology in automotive manufacturing processes, massive and efficient production is a current trend. Therefore, measurement systems with accurate and automated measuring instruments are sought by automotive companies and suppliers. However, the problematic measuring instruments with unreliable accuracy and stability lead to erroneous measurements and wrong quality decisions that cause manufacturers huge profit losses. An effective method called “measurement system analysis” can be applied to define and eliminate erroneous measurements to ensure adequate reliability. An automotive transmission die casting parts supplier called company T was suffering a serious profit loss due to the erroneous measurements …

Design And Research Of Vlcc Vessel Virtual Marine Engine Room, Chuang Zhao

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Detecting Periods Of Flight With High Task Load, James R. Parkinson, Steven J. Landry, Quang Dao, Caitlin Surakitbanharn

The Summer Undergraduate Research Fellowship (SURF) Symposium

Tools that predict dangerous working conditions empirically in the cockpit could greatly improve aviation safety. In an effort to lay the groundwork for such tools, this study will investigate whether a link exists between task load and pilots’ control strategies, their biometric data, and their planes’ position data. Using X Plane simulation software, an experiment will be run in which licensed pilots will fly a 3-nautical-mile approach into Mineta San Jose International Airport 4 times, under different task load conditions. During the flight, participants’ pupil diameters will be recorded along with the simulated aircraft position data and cognitive control modes. …

Assessment Of Management And Documentation Systems For The Bowling Green State University American Society For Quality Student Branch, Sara Murphy

Master of Education in Instructional Design and Technology Plan II Graduate Projects

The Bowling Green State University (BGSU) American Society for Quality (ASQ) student branch seeks to provide current and prospective students the opportunity to expand or build upon current and evolving quality principles. This project seeks to provide the ASQ student branch the opportunity to develop documented systems of daily operations and other activities in relation to the defined BGSU ASQ student branch organizational objectives. The research associated with this project will provide detailed information related to the organizational requirements to aid in the development of documented systemic procedures. The information also indicates what practices should be in place to ensure …

Impact Of Prognostic Uncertainty In System Health Monitoring, Robert M. Vandawaker, David R. Jacques, Jason K. Freels

Faculty Publications

Across many industries, systems are exceeding their intended design lives, whether they are ships, bridges or military aircraft. As a result failure rates can increase and unanticipated wear or failure conditions can arise. Health monitoring research and application has the potential to more safely lengthen the service life of a range of systems through utilization of sensor data and knowledge of failure mechanisms to predict component life remaining. A further benefit of health monitoring when combined across an entire platform is system health management. System health management is an enabler of condition based maintenance, which allows repair or replacement based …

Design, Programming, And User-Experience, Kaila G. Manca

Honors Scholar Theses

This thesis is a culmination of my individualized major in Human-Computer Interaction. As such, it showcases my knowledge of design, computer engineering, user-experience research, and puts into practice my background in psychology, com- munications, and neuroscience.

I provided full-service design and development for a web application to be used by the Digital Media and Design Department and their students.This process involved several iterations of user-experience research, testing, concepting, branding and strategy, ideation, and design. It lead to two products.

The first product is full-scale development and optimization of the web appli- cation.The web application adheres to best practices. It was …

Design Refinement By Iterative Virtual Experimentation (D.R.I.V.E.): A Methodology To Solving Engineering Design Problems, Charles M. Watson

Morehead State Theses and Dissertations

A Thesis Presented to the Faculty of the College of Science & Technology Morehead State University in Partial Fulfillment of the requirements for the Degree Master of Science by Charles M. “Matt” Watson on April 25, 2015

Customer, Commercial And Government Value Functions For Electric Vehicle System Design, Taylan G. Topcu

Research Horizons Day Posters

No abstract provided.