Operations Research, Systems Engineering and Industrial Engineering Commons^™

Smart Flow Facility Analysis, Chantal Ann George, Pete Suktankar, Eric Wilson, Matthew Geiger

Senior Design Project For Engineers

The SMART Flow Design Team has been tasked in providing a physical layout for a single building facility used to consolidate three separate business units. The objective for the new facility will be to manufacture, receive, ship, and store the company's finished products. When designing the physical layout, the team must take into consideration stable and seasonal business volumes, current and future volume demand growth, designated inbound, outbound, and storage areas, and product turn rates. All specifications must be met while determining an efficient flow of goods. The team has designed indoor and outdoor layouts using Microsoft Visio, performed various …

Foster Care Support Foundation Volunteer And Capital Outreach Analysis, Abeer Bhatti, Alexandro Martinez, Sunny Patel, Desmond Vail

Senior Design Project For Engineers

Care Support Foundation (FCSF) provides free goods to children in Georgia. Annually, 11,000 volunteers are needed to deal with the massive influx of donations and fundraising events. Through our analyses, we aim to make recommendations to the FCSF, which can help raise funds and implement mitigating strategies that would increase funds and improve the foundation.

Supply Chain Network Analysis For Outboard Motors At Motor Boaters Usa, Seyedalireza (Ali) Ghiasi, Chase Griffith, Djanene Manuel, Yesenia Pérez, Alvand Rafiee

Senior Design Project For Engineers

Motor Boaters USA found themselves possibly spending too much on their current network distribution of small and large outboard motors and requested new distribution alternatives for the U.S. Through past network distribution data analysis, the team devised 3 scenarios it believed would provide one or more cost effective distribution networks applicable to the request. Through what-if analysis, the teams' calculations produced solid results, which were then presented to Motor Boaters USA for reflection and possible implementation.

Emergency Department Triage Process Improvement, Tessa Williams

Honors Theses

This senior design project was completed at Ascension Borgess Hospital located in Kalamazoo, Michigan. The mission of Ascension Borgess Hospital is to provide patient centered care. In 2018, 562 patients left the Emergency Department (ED) without being seen, which is a large safety risk for the patients and hospital. Based on this, as well as other obstacles, this project focused on meeting the mission of Ascension Borgess by improving key ED metrics that impact patient centered care. In order to meet that mission, this study aims to improve patient experience, safety and quality of the care provided, profitability for the …

Integrated: A Student's Guide To Systems Engineering, Hannah Smith

Research Horizons Day Posters

No abstract provided.

Impacts Of Freight Consolidation And Truck Sharing On Freight Mobility, Tieming Liu, Chaoyue Zhao

Data

Corresponding data set for Tran-SET Project No. 17ITSOKS02. Abstract of the final report is stated below for reference:

"The trucking industry is an important sector of the U.S. economy. However, it is quite fragmented, hindering the efficiency of cargo transportation and the ability for small carriers to identify demands to fill full truck loads. The focus of this research is to study models and algorithms in order to aid online freight marketplaces to identify efficient consolidation strategies. To accomplish this aim, a new mixed integer programming model for the pickup and delivery problem has been developed. The model is geared …

Impacts Of Freight Consolidation And Truck Sharing On Freight Mobility, Tieming Liu, Chaoyue Zhao

Publications

The trucking industry is an important sector of the U.S. economy. However, it is quite fragmented, hindering the efficiency of cargo transportation and the ability for small carriers to identify demands to fill full truck loads. The focus of this research is to study models and algorithms in order to aid online freight marketplaces to identify efficient consolidation strategies. To accomplish this aim, a new mixed integer programming model for the pickup and delivery problem has been developed. The model is geared towards identifying effective freight consolidation opportunities. A branch-and-cut algorithm to solve the model was also developed. The model …

36% Reduction In Fuel Resupply Using A Hybrid Generator & Battery System For An Austere Location, David J. Chester, Torrey J. Wagner, Douglas S. Dudis

Faculty Publications

The DOD energy policy is to increase energy security resiliency, and mitigate costs in the use and management of energy^[1] Forward operating bases (FOBs) are remote, austere base camps that support an operationally defined mission with a limited or no ability to draw from an energy grid and have historically relied on diesel-powered generators for the primary production of energy.^[2] Generators are sized to meet a theoretical peak demand, but steady state loads are far below this peak, resulting in under-loaded generators.^[3] Under-loaded diesel generators decrease efficiency and increase the need for maintenance, affecting the lifespan of …

Analogies And Comparisons For Stm Data Bodies, Phillip M. Cunio, Brien Flewelling

Space Traffic Management Conference

Space Traffic Management (STM) has already demonstrated its potential to be extremely data-intensive. The large number of objects on orbit today, if observed constantly throughout their lifetimes, could produce a staggeringly large number of observations that might in turn generate large numbers of orbits. Orbit data with a lengthy time history can be used to produce estimates of maneuver frequency, susceptibility to natural forces such as drag, and (if combined with photometric data) assessments of behavioral patterns of life.

A future of mega-constellations and a growing number of nations and organizations with assets on orbit would make it likely that …

Biologically Inspired Design Of Context-Aware Smart Products, Ang Liu, Ivan Teo, Diandi Chen, Stephen Lu, Thorsten Wuest, Zhinan Zhang, Fei Tao

Faculty & Staff Scholarship

The rapid development of information and communication technologies (ICTs) and cyber–physical sys-tems (CPSs) has paved the way for the increasing popularity of smart products. Context-awareness isan important facet of product smartness. Unlike artifacts, various bio-systems are naturally characterizedby their extraordinary context-awareness. Biologically inspired design (BID) is one of the most commonlyemployed design strategies. However, few studies have examined the BID of context-aware smart prod-ucts to date. This paper presents a structured design framework to support the BID of context-awaresmart products. The meaning of context-awareness is defined from the perspective of product design.The framework is developed based on the theoretical foundations …

Autonomous Airliners Anytime Soon?, Samuel M. Vance, Evan C. Bird, Daniel J. Tiffin

International Journal of Aviation, Aeronautics, and Aerospace

This research seeks to extend the body of knowledge on factors influential in the decision to fly on an autonomous airliner as a passenger. Only a handful of studies have probed this direct question in the last 16 years, but the data is showing a growing public acceptance of this type of travel. Pivotal in this consideration is the basic element of trust – trust in automated airliners and trust in the airline and Air Traffic Control systems which are responsible for autonomous airliners. Human trust has many forms and manifestations, but in the end, it is a dichotomous or …

Space Dynamics Laboratory Payload Challenge: Autonomous Water Sampling Uav, Thomas Wheeler, Zachary Williams, Joseph Stack

Williams Honors College, Honors Research Projects

The following report has been completed over the course of the Fall 2018 and Spring 2019 semesters at The University of Akron by Joseph P. Stack (Aerospace Systems Engineering), Thomas J. Wheeler (Mechanical Engineering) and Zachary M. Williams (Mechanical Engineering). The purpose of this project was to create a payload system for the Akronauts Rocket Design Team to use at the Intercollegiate Rocket Engineering Competition (IREC) Spaceport America Cup. The Competition as a challenge that is sponsored by Space Dynamics Laboratory specifically regarding payload systems. The challenge in very open-ended and allows student to identify their own scientific experiment and …

A Case For Open Mission Systems In Dod Aircraft Avionics, Michael J. Brown, R. David Fass, Jonathan D. Ritschel

Faculty Publications

The DOD is adopting open mission systems (OMS) as the future in the military aviation environment. OMS proponents promise reduced costs and truncated schedules through increased competition in the marketplace and reduced coding efforts. To the best of our knowledge, no studies have examined the success of these open architectures in the DOD. Therefore, we investigate costs and schedule for a recent DOD avionics OMS demonstration platform in comparison to 13 historically analogous programs.

Pharmaceutical Scheduling Using Simulated Annealing And Steepest Descent Method, Bryant Jamison Spencer

Graduate Theses, Dissertations, and Problem Reports (ETD)

In the pharmaceutical manufacturing world, a deadline could be the difference between losing a multimillion-dollar contract or extending it. This, among many other reasons, is why good scheduling methods are vital. This problem report addresses Flexible Flowshop (FF) scheduling using Simulated Annealing (SA) in conjunction with the Steepest Descent heuristic (SD).

FF is a generalized version of the flowshop problem, where each product goes through S number of stages, where each stage has M number of machines. As opposed to a normal flowshop problem, all ‘jobs’ do not have to flow in the same sequence from stage to stage. The …

Material Interactions And Self-Assembly In Inkjet Printing, Karam Nashwan Al-Milaji

Theses and Dissertations

Inkjet printing has attracted much attention in recent years as a versatile manufacturing tool, suitable for printing functional materials. This facile, low-cost printing technique with high throughput and accuracy is considered promising for a wide range of applications including but not limited to optical and electronic devices, sensors, solar cells, biochips, and displays. The performance of such functional devices is significantly influenced by the deposit morphology and printing resolution. Therefore, fabrication functional devices with precise footprints by inkjet printing requires deep understanding of ink properties, material interactions, and material self-assembly.

In conventional inkjet printing process, where sessile droplets are directly …

L1 Month: Utilizing High Power Rocketry As A Training Tool For Student Organizations, Aaron Hunt, Oakley Copeland, Mckynzie Perry, Benjamin Thomas

Von Braun Symposium Student Posters

No abstract provided.

Understanding The Rocket Economy, Luke Smith, Christopher White, Victor Lopez

Von Braun Symposium Student Posters

No abstract provided.

Maximizing Financial Benefit Of Lean Six Sigma Projects Through Optimized Selection Criteria, Colin Wasiloff

Operations Research and Engineering Management Theses and Dissertations

As evolving threats across the globe keep pace with increasing budget constraints, the US Army’s major subordinate commands and their sub-organizations are constantly challenged to do more with less. Resources such as human capital, information technology, facilities, and budgeted funding are stretched as thin as ever, while requirements to serve the Warfighter remain paramount. Each dollar of financial benefit gained through cost reduction efforts at the US Army can affect the Warfighter directly. Budgeted money saved or avoided is reprogrammed both locally and atop the hierarchy at the Department of Treasury to serve the Warfighter better.

Ordinal Logistic Regression was …

Modular Crates – A Holistic Design Approach For Optimizing Cube Size In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Global market is a field where all industries strive to provide personalized product for every customer demand in order to compete with their competitors in the business battlefield. Product personalization varies with customer to customer which increases the product variety. When the product size variability is vast, producing packages for every individual product is not only difficult but also increases the design time, production time, total manufacturing cost and inventory cost. For the present scenario, Industrial packages does not opt customizability for variable product sizes. Customized package for personalized product is achievable only by redesigning the existing distribution package with …

Origami-Based Deployable Ballistic Barrier, Kenny Seymour, Dakota Burrow, Alex Avila, Terri Bateman, David C. Morgan, Spencer P. Magleby, Larry L. Howell

Faculty Publications

This paper demonstrates how recent developments in origami crease pattern adaptation, surrogate folds, and thickness accommodation techniques enabled development of an origami-based deployable ballistic barrier. The barrier crease pattern was employed using the membrane-fold technique for surrogate folds and to assist in thickness accommodation. A proof-of-concept barrier was fabricated and tested, demonstrating ballistic resistance, a large deployment ratio, and rapid deployment times.

Throughput And Yield Improvement For A Continuous Discrete-Product Manufacturing System, Md Shahriar J. Hossain

LSU Doctoral Dissertations

A seam-welded steel pipe manufacturing process has mainly four distinct major design and/or operational problems dealing with buffer inventory, cutting tools, pipe sizing and inspection-rework facility. The general objective of this research is to optimally solve these four important problems to improve the throughput and yield of the system at a minimum cost.

The first problem of this research finds the optimal buffer capacity of steel strip coils to minimize the maintenance and downtime related costs. The total cost function for this coil feeding system is formulated as a constrained non-linear programming (NLP) problem which is solved with a search …

Effective Resource Utilization In Arkansas Public Schools, Ryan Sanders

Industrial Engineering Undergraduate Honors Theses

Teacher pay in Arkansas public schools varies widely from district to district across the state. This pay discrepancy is driven by both the funds available to a district and by how these funds are allocated. There is a standard per student budget given to districts across the state, but this budget can be supplemented by additional property taxes collected on property within a district. This leaves districts with more highly valued property at an advantage. Districts are free to allocate their budget for teacher pay as they see fit, with constraints on number of students per teacher and minimum teacher …

A Method For Robust Requirements Definition, Marc Gethers

Research Horizons Day Posters

No abstract provided.

Likelihood And Cost Impact Of Engineering Change Requirements For Dod Contracts, James C. Ellis, Edward D. White, Jonathan D. Ritschel, Shawn M. Valentine, Brandon Lucas, Ian S. Cordell

Faculty Publications

Purpose: There appears to be no empirical-based method in the literature for estimating if an engineering change proposal (ECP) will occur or the dollar amount incurred. This paper aims to present an empirically based approach to address this shortfall.
Design/Methodology/Approach: Using the cost assessment data enterprise database, 533 contracts were randomly selected via a stratified sampling plan to build two regression models: one to predict the likelihood of a contract experiencing an ECP and the other to determine the expected median per cent increase in baseline contract cost if an ECP was likely. Both models adopted a stepwise approach. A …

Repeatability Case Study Of The 3d Printer In The School Of Engineering And Applied Science Lab, Naif Faleh S. Albaiji

Masters Theses & Specialist Projects

3DP (three-dimensional printing) technologies have become more than just a tool to help companies with prototyping and designing in the pre-production stage. Some firms have already implemented 3DP technology to produce parts and end-use products. However, there are several challenges and barriers that this technology must overcome to replace traditional manufacturing methods. One of the most significant obstacles associated with 3D printing is its low level of accuracy in variable repeatability when it comes to making separate batches of the same product. There are several arguable reasons behind this variation. Some of the factors that can influence repeatability are the …

An Analysis Of Major Acquisition Reforms Through Text Mining And Grounded Theory Design, Amanda L. Mcgowin

Theses and Dissertations

Cost growth is an established phenomenon within Defense Acquisition that the US Government has attempted to abolish for decades through seemingly endless cycles of reform. Dozens of experts and senior leaders within the acquisition community have published their notions on the reasons for cost growth, nevertheless, legislation has yet to eradicate this presumed conundrum. For this reason, this research is aimed at identifying existing trends within past major Defense Acquisition Reform legislation, as well as in a compendium of views from leaders within the Defense Acquisition community on the efficacy of acquisition reform, to determine the possible disconnect. To accomplish …

Experimental Designs, Meta-Modeling, And Meta-Learning For Mixed-Factor Systems With Large Decision Spaces, Zachary C. Little

Theses and Dissertations

Many Air Force studies require a design and analysis process that can accommodate for the computational challenges associated with complex systems, simulations, and real-world decisions. For systems with large decision spaces and a mixture of continuous, discrete, and categorical factors, nearly orthogonal-and-balanced (NOAB) designs can be used as efficient, representative subsets of all possible design points for system evaluation, where meta-models are then fitted to act as surrogates to system outputs. The mixed-integer linear programming (MILP) formulations used to construct first-order NOAB designs are extended to solve for low correlation between second-order model terms (i.e., two-way interactions and quadratics). The …

Predictive Models For Charitable Giving Using Machine Learning Techniques, Leily Farrokhvar, Azadeh Ansari, Behrooz Kamali

Faculty & Staff Scholarship

Private giving represents more than three fourths of all U.S. charitable donations, about 2% of total Gross Domestic Product (GDP). Private giving is a significant factor in funding the nonprofit sector of the U.S. economy, which accounts for more than 10% of total GDP. Despite the abundance of data available through tax forms and other sources, it is unclear which factors influence private donation, and a reliable predictive mechanism remains elu- sive. This study aims to develop predictive models to accurately estimate future charitable giving based on a set of potentially influential factors. We have selected several factors, including unemployment …

Integration Of Hydrogeophysical Datasets And Empirical Orthogonal Functions For Improved Irrigation Water Management, Catherine E. Finkenbiner, Trenton E. Franz, Justin P. Gibson, Derek M. Heeren, J. D. Luck

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Precision agriculture offers the technologies to manage for infield variability and incorporate variability into irrigation management decisions. The major limitation of this technology often lies in the reconciliation of disparate data sources and the generation of irrigation prescription maps. Here the authors explore the utility of the cosmic-ray neutron probe (CRNP) which measures volumetric soil water content (SWC) in the top ~ 30 cm of the soil profile. The key advantages of CRNP is that the sensor is passive, non-invasive, mobile and soil temperature-invariant, making data collection more compatible with existing farm operations and extending the mapping period. The objectives …

Application Of Real Field Connected Vehicle Data For Aggressive Driving Identification On Horizontal Curves, Arash Jahangiri, Vincent Berardi, Sahar Ghanipoor Machiani

Psychology Faculty Articles and Research

The emerging technology of connected vehicles generates a vast amount of data that could be used to enhance roadway safety. In this paper, we focused on safety applications of a real field connected vehicle data on a horizontal curve. The database contains connected vehicle data that were collected on public roads in Ann Arbor, Michigan with instrumented vehicles. Horizontal curve negotiations are associated with a great number of accidents, which are mainly attributed to driving errors. Aggressive/risky driving is a contributing factor to the high rate of crashes on horizontal curves. Using basic safety message data in connected vehicle data …