Operations Research, Systems Engineering and Industrial Engineering Commons^™

Modeling Conveyor Merges In Zone Picking Systems, Rene De Koster, Ivo J.B.F. Adan, Jacques Resing

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

In many order picking and sorting systems conveyors are used to transport products through the system and to merge multiple flows of products into one single flow. In practice, conveyor merges are potential points of congestion, and consequently can lead to a reduced throughput. In this paper, we study merges in a zone picking system. The performance of a zone picking system is, for a large part, determined by the performance of the merge locations. We model the system as a closed queueing network that describes the conveyor, the pick zones, and the merge locations. The resulting model does not …

A New Approach For Generating Facility Layouts Using An Algorithmic Approach, Volker Sadowsky, Christian Mosblech

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

In this paper a new approach is described to automatically create layouts for material flow systems. The current research in progress aiming at adopting the methods and algorithms of the Electronic Design Automation to be used in logistics planning is presented. These methods are already applied to create microchips being multiple times more complex than material flow systems while following the same goal: Functional units have to be placed on a predefined area and are linked by connections weighted differently. This basic requirement can be applied to microchip designs as well as material flow systems. The common condition is to …

Setting Cutoff Times For Picking Systems With Capacity Degradation, Kevin R. Gue

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

In the new landscape of e-commerce distribution, firms must offer increasingly aggressive delivery promises and then make good on them. These promises often take the form of a cutoff time, such that orders placed before the cutoff time receive premium service (next-day, same-day, etc.) and those placed afterward do not. Later cutoff times are stronger, of course, but the fulfillment system might not be able to process the order before the deadline. How late is too late? We develop a deterministic model to answer this and related questions when the order fulfillment system batches orders for efficient picking operations and …

Robust Truckload Relay Network Design Under Demand Uncertainty, Hector A. Vergara, Zahra Mokhtari

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

This research addresses the issue of incorporating demand uncertainty in the strategic design of relay networks for truckload transportation. An existing composite variable mathematical model for the design of hybrid relay networks is extended by developing its robust counterpart. The proposed approach considers uncertainty in the number of truckloads to be dispatched between a pair of nodes in the network which is characterized by a symmetric interval around the expected demand value. A two-step heuristic approach is used to solve the robust model. Several numerical experiments are carried out to study the differences between the solutions obtained with the robust …

Experimental Validation Of Travel Time Models For Shuttle-Based Automated Storage And Retrieval System, Zaki Sari, Latefa Ghomri, Banu Y. Ekren, Tone Lerher

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

In this paper, we aim to validate travel time models for single and dual command cycle displacements of lifts and shuttles in a shuttle-based automated storage and retrieval system (SBS/RS) by using experimental computer simulation. The models under consideration take into account acceleration and deceleration delays. We use ARENA 12 software for the simulation modeling. By simulation, we emulate the real functioning of the system. Therefore, we assume that the results from the ARENA simulation are equivalent to the onsite experimentation. Simulation results are very close to those obtained by analytical travel time models. This shows the high precision of …

Model And Algorithm For Supply Chain Analysis In Energy-Wood Industry, Thorsten Schmidt, Hannes Hahne

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Short rotation coppices are a renewable energy concept based on renewable raw material. This paper proposes a model and calculation method which generates valid supply chains using quantified technological and infrastructural constraints.

Integrate Vehicle Routing And Truck Sequencing In Cross-Docking Operations, Ching-Jung Ting, Ting-Don Chen

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Cross-docking is a an important logistics strategy in which freight is unloaded from inbound vehicles and directly loaded into outbound vehicles, with little or no storage in between. This study considers a crossdocking system which combines the vehicle routing problem with crossdocking (VRPCD) for both inbound and outbound operations and truck sequencing problem at docks. The objective is to minimize the logistics center operation costs and transportation costs. We first formulated the integrated problem with a mixed integer programming model. Since VRPCD and sequencing problems are NP-hard, the integrated problem is also an NP-hard problem. We propose an ant colony …

The Cube Per Order Index Slotting Strategy, How Bad Can It Be?, Peter C. Schuur

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

A well-known and frequently applied policy to assign stock keeping units (SKUs) to (dedicated) storage locations in a warehouse is the Cube per Order Index (COI) slotting strategy. Basically, COI stores an SKU based on how frequently it is picked per unit of stock space required. Fast movers are located close to the Input-Output points. For single command order picking, COI slotting is well-known to minimize order picking travel time. For multi command this is no longer true. An interesting question is: how bad can it be? In this paper we show that there is no limit to this badness. …

Development Of A Heuristics For A Criteria Based Planning Of Pallet Storage Systems, Detlef Spee, Michael Schmidt, Steffen Schieweck

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Reproducible and quantitative reasoning as the foundation for high-quality planning processes evolves to be key to achieve high quality of speed for logistical processes. This article strives to fulfill this demand by developing a coherent heuristics for the planning of pallet storage systems. The heuristics uses quantitative approaches provided by the available literature. In case of nonexistent sources, the missing components are developed and integrated. To be applicable in an industrial environment, the comparison and assessment of the created implementation alternatives is mainly monetary based. The heuristics follows a modular structure to achieve adaptability and extensibility. It explicitly does not …

Data Model And Software Tools For Modeling Picking Operations, Jeffrey S. Smith

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Presenter will provide.

An Analysis Of Single-Command Operations In A Mobile Rack (As/Rs) Served By A Single Order Picker, Amine Hakim Guezzen, Zaki Sari

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

A Mobile rack Automated Storage and Retrieval Systems (MAS/ RS) are picker-to-stock retrieval model which are a variation of the multi aisles AS/RS. This mobile storage system is composed of racks moving laterally on rails so that one can open an aisle between any two adjacent racks, the input/output system, the storage and retrieval (S/R) machine and the computer management system or the control system. Evaluating an AS/RS could be done using several performance indicators, the two most important ones are: The utilization rate of the S/R machine and the average time necessary to serve storage or retrieval requests (the …

Order Batching With Time Constraints In A Parallel-Aisle Warehouse: A Multiple-Policy Approach, Soondo Hong, Andrew L. Johnson, Brett A. Peters

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

A commitment of delivery time is critical in some online businesses (De Koster, 2003). An important challenge to meeting customers’ needs is timely order picking which is also relevant to worker safety, item freshness, overall operational synchronization, and reduced overtime. We analyze an order batch picking situation where a trip is constrained by vehicle capacity and must be completed within a specified time. We develop a model which partitions orders to batches to minimize the total travel time such that each trip meets the orders’ time constraints and capacity limit, and also determines a suitable operational policy for each batch. …

Designing Retail Facilities To Improve Product Exposure, Pratik J. Parikh, Corinne Mowrey

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

A retail facility should effectively engage consumers during their shopping trips if they want to convert demand into purchases. Unfortunately, the complexity of the retailing environment and lack of scientific tools often results in gut-feel approaches experimented in practice. A key factor to retail design often alluded to, but rarely analyzed, is product exposure to the travelling shopper. We define the extent of the shopper's field of vision in order to determine the actual exposure of products experienced by a traveling shopper. In so doing, we can explore the effect rack orientation has on product exposure. Our main contributions include …

Modular Design Of Physical Internet Transport, Handling And Packaging Containers, Benoit Montreuil, Eric Ballot, William Tremblay

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

This paper proposes a three‐tier characterization of Physical Internet containers into transport, handling and packaging containers. It first provides an overview of goods encapsulation in the Physical Internet and of the generic characteristics of Physical Internet containers. Then it proceeds with an analysis of the current goods encapsulation practices. This leads to the introduction of the three tiers, with explicit description and analysis of containers of each tier. The paper provides a synthesis of the proposed transformation of goods encapsulation and highlights key research and innovation opportunities and challenges for both industry and academia.

An Experimental Study Of The Impact Of Warehouse Parameters On The Design Of A Case-Picking Warehouse, Russell D. Meller, Lisa M. Thomas

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

The best design for a warehouse is based on its ability to meet the demands placed on the warehouse, which are typically characterized by warehouse parameters like the order , inventory requirements, etc. Consequently, these parameters should be considered in the design process. In this paper we characterize the design of a case-picking ware- house with design variables and identify the warehouse parameters that have the greatest impact in setting the values of these variables. With our analysis, the search for the optimal design can be reduced by limiting the design space considered.

A Frame Work And Analysis To Inform The Selection Of Piece-Level Order-Fulfillment Technologies, Jennifer A. Pazour, Russell D. Meller

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Thepiece-levelorder-fulfillmenttechnologyselectionproblemisanimportantstrategicproblemthatsignificantlyimpactsdistributioncentercosts andoperations,andistypicallysolvedbasedonempiricalexperiences.Given ademandcurveandasuiteofavailablepiece-levelorder-fulfillmenttechnologies, weanalyzewhereinthedemandcurvedifferentorder-fulfillment technologiesshouldbeapplied. Todoso, wedevelopaframeworkthat jointlydeterminesthebestcombinationofpiece-levelorder-fulfillmenttechnologiesandtheassignmentofSKUstothesetechnologies, whichrelaxes thesequential-modelingapproachofpreviousresearch. Wevalidateour methodologywithindustrydataandshowthatour modelprovidestechnologyrecommendationsandSKUassignmentsthatareconsistent with successfulimplementations. Throughasetofnumericalexperimentsand statisticalanalysis,weidentifykeyfactorsinimplementingmanualversus automatedorder-fulfillmenttechnologiesandprovideobservationsintothe applicationofdifferentorder-fulfillmenttechnologystrategies.Finally,we presentconclusionsandfutureresearchdirections.

Optimization Of Skus' Locations In Warehouse, David Sourek, Vaclav Cempirek

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Many companies, which deal with warehousing, optimize their warehouses. The main business of these companies is to offer to customers the warehousing services. It is possible to note that these companies are specialized in warehousing. On the other hand, we can find companies, which have as the main business the selling of goods to customers. These companies use the warehouses too but in a little bit different way. The arrangement of their warehouses can be very unsuitable and convenient for optimization. Our paper is focused on optimization of stored goods’ locations based on market basket analysis. The solution of this …

Grid Facilities Design: Dynamic Modular Deployment Of Production, Handling And Storage Resources, Suzanne Marcotte, Benoit Montreuil

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

To survive and thrive in a fast-moving environment, facilities must be designed to show adaptability, flexibility and robustness. As some facilities are depicted by heavy and sophisticated equipment costly and hard to displace, others are composed of moveable workstations with highly flexible workers. In most cases, the trade-off is between the cost of redeploying the resources and the excessive cost of material handling and storage incurred by an inefficient deployment of the resources. We propose a design strategy based on (1) conceiving and designing the facility as a stable grid of modules, (2) dynamically deploying production, storage and handling resources …

Modeling And Optimization Of Radio Frequency Identification Networks For Inventory Management, Atipong Suriya, Jose D. Porter

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Stock loss and out-of-stocks are outcomes of poorly designed inventory management systems and can lead to significant revenue losses. Inventory management systems (IMSs) based on radio frequency identification (RFID) have the potential to minimize these losses if they are properly designed and deployed. However, the placement of RFID readers to support IMSs is often done on a trial and error basis which is time consuming and results in less than optimal coverage. A methodology to find the optimal location and number of RFID readers in a warehouse facility to ensure a desired level of radio frequency signal coverage was developed …

Real-Time Dock Door Monitoring System Using A Kinect Sensor, Hector J. Carlo, Cristina Pomales- Garcia, Yeiram Martinez

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

This study presents a proof of concept where a single Microsoft Kinect sensor is used for automated monitoring of a dock door in real-time. The proposed system will automatically and in real-time: (1) detect when an object breaches the dock door perimeter, and its corresponding speed and direction, (2) count the number of pallets loaded/unloaded to/from a trailer, (3) record the loading/unloading time of each load, and (4) reconstruct an image of every loading/unloading trip at a dock door, irrespectively of the material handling travel speed and direction. Particular emphasis is given to discussing how to extend the proposed concept …

Social Media For Supply Chain Risk Management, Xiuju Fu, Rick S. M. Goh, J. C. Tong, Loganathan Ponnanbalam, Xiaofeng Yin, Zhaoxia Wang, H. Y. Xu, Sifei Lu

Research Collection School Of Computing and Information Systems

With the rapid increase of online social network users worldwide, social media feeds have become a rich and valuable information resource and attract great attention across diversified domains. In social media data, there are abundant contents of two-way and interactive communication about products, demand, customer services and supply. This makes social media a valuable channel for listening to the voices from the market and measuring supply chain risks and new market trends for companies. In this study, we surveyed the potential value of social media in supply chain risk management (SCRM) and examined how they can be applied to SCRM …

Decision Trees To Model The Impact Of Disruption And Recovery In Supply Chain Networks, Loganathan Ponnanbalam, L. Wenbin, Xiuju Fu, Xiaofeng Yin, Zhaoxia Wang, Rick S. M. Goh

Research Collection School Of Computing and Information Systems

Increase in the frequency of disruptions in the recent times and their impact have increased the attention in supply chain disruption management research. The objective of this paper is to understand as to how a disruption might affect the supply chain network - depending upon the network structure, the node that is disrupted, the disruption in production capacity of the disrupted node and the period of the disruption - via decision trees. To this end, we first developed a 5-tier agent-based supply chain model and then simulated it for various what-if disruptive scenarios for 3 different network structures (80 trials …

On The Allocation Of Exclusive-Use Counters For Airport Check-In Queues: Static Vs. Dynamic Policies, Mahmut Parlar, Brian Rodrigues, Sharafali Moosa

Research Collection Lee Kong Chian School Of Business

In this paper we propose a static policy for the optimal allocation of a fixed number of exclusive-use check-in counters dedicated to a single flight. We first provide the motivation for considering the static policy by showing that the dynamic policy already available in the literature suffers from the curse of dimensionality. The objective is to minimize the (expected) total cost of waiting, counter operation, and passenger delay costs which we show to be convex in the number of counters allocated. In those cases where the passenger delay cost is difficult to estimate, we propose an alternative formulation and minimize …

Riskvis: Supply Chain Visualization With Risk Management And Real-Time Monitoring, Rick S. M. Goh, Zhaoxia Wang, Xiaofeng Yin, Xiuju Fu, Loganathan Ponnanbalam, Sifei Lu, Xiaorong Li

Research Collection School Of Computing and Information Systems

With increased complexity, supply chain networks (SCNs) of modern era face higher risks and lower efficiency due to limited visibility. Hence, there is an immediate need to provide end-to-end supply chain visibility for efficient management of complex supply chains. This paper proposes a visualization scheme based on multi-hierarchical modular design and develops a supply chain visualization platform with risk management and real-time monitoring, named RiskVis, for realizing better Supply Chain Risk Management (SCRM). A Supply Chain Visualizer (SCV) with a graphical visualization platform is mounted as a part of a SCRM management decision-making dashboard and it provides senior management a …

Materials Education And Research In Art And Design: A New Role For Libraries (Survey Stats), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Sheet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Booklet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Website), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Collection Creation And Administration: A New Role For Libraries (White Paper), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

The Problem/Opportunity: To define, identify, and guide design-based materials collections in academic settings and foster community among those with existing collections and/or those considering creating and supporting one.

Contents and topics:

1. What is a materials collection?
2. Why have a materials collection?
3. Acquisition strategies
4. Organizational approaches
5. Programming possibilities
6. Symposium summary
7. Resources

Vehicle Minimization For The Multimodal Pickup And Delivery Problem With Time Windows, Benjamin A . Clapp

Theses and Dissertations

The algorithm proposed here is used for heuristic solutions for the Multimodal Multiple Vehicle Routing Problem with Unloading Capacity, Pickup and Dropoff, and Time Windows, solved so as to minimize the number of vehicles used, subject to varying objective function values for each vehicle. The MVRP is simplified and split into a routing problem and a scheduling problem. The routing problem is addressed by Dijkstra's Algorithm. This generates a new network for the second stage of the algorithm. It is assumed that the shortest path is the correct path to use, and shipments each travel unimodally. The scheduling problem is …