Operations Research, Systems Engineering and Industrial Engineering Commons^™

Design And Manufacture Of Natural Composite Canoe, Derek Baptista

Industrial and Manufacturing Engineering

Abstract

This report looks into the application and feasibility of manufacturing natural composite canoes. The main fabrics that were analyzed are flax, hemp, and jute. These were then compared to carbon fiber and fiberglass to see the difference in mechanical properties. It was found that the natural fibers have lower mechanical properties but that this could be overcome by designing a balsa wood core with ribs running up the walls. After manufacturing a hemp canoe, many lesson were learned and areas of interest were further explored. With the use of different natural fibers, these canoes can greatly reduce the carbon …

Chsr Clothing: How To Start A Small Business Clothing Line To Be Run Efficiently With Minimum Capital And Maximum Profit, Kayvon Banisalam

Industrial and Manufacturing Engineering

Executive Summary

Many clothing brands have failed because they did not design marketable products with a suitable business plan. Often times, clothing brand owners do not use the capital they possess in efficient ways. They can get caught off guard with unexpected costs and are not running the business in the most resourceful and professional way.

The goal of this project is to create a clothing brand that portrays distinctive designs to go along with an effective business model. This includes implementing decision analysis at several points of the planning phase, along with quality and cost controls. Creating quality products …

Facilities Planning For An Aerospace Manufacturing Company, William Petrossi

Industrial and Manufacturing Engineering

Absolute Technologies Inc. (ATI) has been growing for years, and is running out of space at their current manufacturing facility in Yorba Linda, CA. ATI will be moving to a much larger facility this winter. They are looking for an efficient way to utilize this space. The machine positions were taken as fixed, seeing as a lean expert was brought in to give advice on placement. With the machines fixed, the scope was narrowed to other areas.

A systematic approach to facilities design is utilized. First, a goal needs to be defined. The goal is to reduce the time wasted …

Consolidation Of Company Abc, Estelle Sillari-Owen

Industrial and Manufacturing Engineering

This project aims to solve Company ABC’s issues in order to keep the company afloat and to keep the company profitable. This was done by reducing Company ABC’s organizational and inventory build-up issues. The project aims to reduce the company’s dependence on outside storage, with plans of consistent inventory reduction over the next year. An implementation plan was created to ensure the company keeps on track to increase profits and prevent against increasing inventory costs.

Droplet Spray Behavior Of An Atomization-Based Cutting Fluid (Acf) System For Machining Of Titanium Alloys, Chandra Nath, Shiv G. Kapoor, Anil K. Srivastava, Jon Iverson

Manufacturing & Industrial Engineering Faculty Publications

The aim of this research is to study droplet spray characteristics of an atomization-based cutting fluid (ACF) spray system including droplet entrainment angle and flow development regions with respect to three ACF spray parameters, viz., droplet and gas velocities, and spray distance. ACF spray experiments are performed by varying droplet and gas velocities. The flow development behavior is studied by modeling the droplets entrainment mechanism, and the density and distribution of the droplets across the jet flare. Machining experiments are also performed in order to understand the effect of the droplet spray behavior on the machining performances, viz., tool life/wear, …

Work In Progress: Outreach Assessment: Measuring Engagement, Lizabeth Schlemer, John Oliver, Katherine Chen, Sophia Rodriguez Mata, Eric Kim

Industrial and Manufacturing Engineering

The Learn By Doing Lab (LBDL) at Cal Poly, San Luis Obispo is an on-campus laboratory where 5th through 8th grade students are taught by undergraduates who may be planning a careers in teaching. The two populations - elementary students and undergraduates - are equally important in the process. Since 2008, the lab has seen over 4000 elementary and junior high students and over 100 undergrads have participated. In most outreach assessment the number of individuals participating is an important metric, but this last Spring we experimented with a more in depth measure of effectiveness. As in any learning experience …

Warehouse Redesign, Cristine Carmel Dewar

Industrial and Manufacturing Engineering

A young, growing biomedical company is expanding its warehouse space to keep up with the increasing production. This project’s goals were to recommend a layout and improve a process that would minimize the distance traveled by the material handlers, increase the safety of the warehouse by implementing visual controls, implement ergonomics to reduce chance of injury, and save money for the company. To achieve this first I familiarized myself with their current processes and department and the space required for their current and future production levels. Next I created two alternative layouts, the first (Layout A) to minimize distance and …

Development And Validation Of A Model For Granular Material Volume Measurements, Pourya Fasounaki

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Keeping inventory record of packed grains in silos poses challenges since the bulk material’s different segments do not discharge uniformly, leading to formation of random peaks and valleys on the surface. To facilitate obtaining accurate volume measurement of the grains by taking into account this non-linear behavior on the surface, laser or plumb-bob level-sensing devices are employed at different part of the surface to probe the level of material under those regions.

The main goals of this research is to study the behavior of granular material in silo while discharging downward and by doing so, differentiate certain flow patterns formed …

College Of Engineering Senior Design Competition Spring 2012, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Senior Design Experience

Part of every UNLV engineering student’s academic experience, the Senior Design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. Working in teams, the senior design project encourages students to use everything learned in the engineering and computer design programs to create a practical, real world solution to an engineering challenge.

Beyond the classroom...

Because of the requirement to work in teams, students also build good communication skills, presentation skills and even business writing skills. They also have to source …

Study Of Grinding Burn Using Design Of Experiments Approach And Advanced Kaizen Methodology, Kiruthika Devi Sundarrajan

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Grinding burn has been one of the re-occurring issues at a leading automotive manufacturer. Historically when grinding burn occurred, trial and error was used to delicately find a set up process settings that provided good-enough-to-get-by results, but not optimal. Some changes include changing the coolant manifold to improve the coolant flow and rate, changing the grinding wheel, changing the type of coolant. The experiments have proved to introduce some improvements, however the occurrence of grinding burns have not been reduced or quantified and the cause of the grinding burn has not been identified or quantified. Grinding is a complex phenomenon …

Improving Health Care Quality And Safety: The Development And Assessment Of Laparoscopic Surgery Instrumentation, Practices And Procedures, Bernadette Mccrory

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Adverse events due to medical errors are a leading cause of death in the United States exceeding the mortality rates of motor vehicle accidents, breast cancer and AIDS. Improvements can and should be made to reduce the rates of preventable surgical errors since they account for nearly half of all adverse events within hospitals. Although minimally invasive surgery has proven patient benefits such as reduced postoperative pain and hospital stay, its operative environment imposes substantial physical and cognitive strain on the surgeon increasing the risk of error. In order to mitigate errors and protect patients, a multidisciplinary approach was taken …

Integrating Courses Through Project Based Learning, Lizabeth Schlemer, Sema E. Alptekin, Karen R. Bangs

Industrial and Manufacturing Engineering

Integrating three courses (one sophomore level, two senior level) through Project Based Learning (PBL) within the Industrial Engineering curriculum at the California Polytechnic State University, San Luis Obispo is presented. Three courses (IME 443 Facilities Planning and Design - senior level; IME 420 Simulation - senior level; and IME 223 Process Improvement Fundamentals - sophomore level) were linked by various mechanisms: Common industry projects, common students in two of the three courses; senior students having access to sophomores in their teams to carry out time consuming tasks such as time studies, and sophomores having access to seniors as team members, …

A Unified Enterprise-Wide Cost Modeling Framework For Engineering Applications Based On Systems Engineering Principles, Yousuf S. Mohammed

Mechanical & Aerospace Engineering Theses & Dissertations

In the present research the problem of enterprise-wide cost modeling is approached from a systems engineering standpoint. What this does is to use each stage of product life cycle to obtain useful information that helps in estimating the cost of the system. Once a generic framework is developed for estimating the core cost, layers of other factors that affect the cost are applied to the core cost, such as risk and uncertainty, maintainability, supply-chain and socioeconomic conditions. The cost model is expanded to accommodate a product domain ranging from a simple object to a system in the following hierarchy: System, …

Effect Of Gold Content On The Microstructural Evolution Of Sac305 Solder Joints Under Isothermal Aging, Mike Powers, Jianbiao Pan, Julie Silk, Patrick Hyland

Industrial and Manufacturing Engineering

Au over Ni on Cu is a widely used printed circuit board (PCB) surface finish, under bump metallization (UBM), and component lead metallization. It is generally accepted that less than 3 wt.% Au in Sn-Pb solder joints inhibits formation of detrimental intermetallic compounds (IMC). However, the critical limit for Au content in Pb-free solder joints is not well established. Three surface-mount package platforms, one with a matte Sn surface finish and the others with Ni/Au finish, were soldered to Ni/Au-finished PCB using Sn-3.0Ag- 0.5Cu (SAC305) solder, in a realistic manufacturing setting. The assembled boards were divided into three groups: one …

The Morphology Evolution And Voiding Of Solder Joints On Qfn Central Pads With A Ni/Au Finish, Julie Silk, Jianbiao Pan, Mike Powers

Industrial and Manufacturing Engineering

In this paper, we report on a comprehensive study regarding the morphology evolution and voiding of SnAgCu solder joints on the central pad of two different packages – QFN and an Agilent package called TOPS – on PCBs with a Ni/Au surface finish. Samples were isothermally aged at the equivalent of 0, 2, 7 and 14 years service life. Representative solder joints were cross-sectioned and analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) in order to investigate the evolution of the solder joint morphology as a function of Au content and isothermal aging. IMC thickness was …

Learning From Failure In Systems Engineering: A Panel Discussion, Nathan Slegers, Ronald T. Kadish, Gary E. Payton, John Thomas, Michael D. Griffin, Dan Dumbacher

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This paper summarizes the discussion of the Learning from Failure in Systems Engineering panel that was held in Huntsville, AL on November 8, 2010. The panel objective was to discuss how systems engineers respond to and learn from failure and identify future directions important to the community. The panel consisted of four representatives with experience in government, industry, and academia: (1) Ronald Kadish from Booz Allen Hamilton and former director of the Missile Defense Agency, (2) Gary Payton, retired Deputy Under Secretary of the Air Force for Space Programs, (3) John Thomas from Booz Allen Hamilton and President-elect of INCOSE, …

Network-Based Data Collection For A Project-Based Freshman Class, Samuel Bogan Daniels, Cheryl Q. Li, David Harding

Mechanical and Industrial Engineering Faculty Publications

The hands-on experience for engineering students is often lacking with class sizes increasing and classroom resources under constant pressure. Even with smaller class sizes and studio classrooms there is only so much equipment and technical support to run experiments and allow for student interaction. Network-based data collection and control may alleviate some of these issues and allow for more hands-on experiences, although remote, in the classroom. This paper discusses the interesting problems and not so obvious pitfalls of setting up some simple network-based data acquisition systems for a multidisciplinary freshman level engineering course. The course as currently taught includes some …

Throughput Analysis And Bottleneck Management Of Production Lines, Hatice Ucar

Wayne State University Dissertations

Companies are increasing their manufacturing excellence in order to stay competitive in the globalizing market. Plants are becoming more complex year by year due to increasing product classes, hardware complexity, etc... The design and operation of manufacturing systems is of greater importance today than it was in the past. Many studies have been carried out on the design and operation of manufacturing systems by academicians and practitioners over the years, however, there is still no agreement on how to best predict and improve the factory performance (Gershwin, 2000). The studies are based on either analytical approaches or simulation-based approaches. Success …

Factors Impacting Technology Transfer: The Maquiladora Industry In Yucatan, Mexico, Ana Maria Canto, Carlos Blanco, Pilar Pazos

Engineering Management & Systems Engineering Faculty Publications

Technology transfer and knowledge transfer are the building blocks for innovation, efficiency and increased competitiveness. The topic of technology transfer in the context of multinational companies has been the focus of technology management researchers for well over two decades. Developing countries housing twin plans have been exposed to technology transfer from very diverse countries with different approaches to the technology transfer process and different levels of success. This cultural and national diversity adds an additional level of complexity to the technology transfer domain that has been largely unexplored. This paper will explore critical factors that had an impact in successful …

An Integrated Framework For Configurable Product Assortment Planning, Seyed Ali Taghavi Behbahani

Wayne State University Dissertations

A manufacturer's assortment is the set of products or product configurations that the company builds and offers to its customers. While the literature on assortment planning is growing in recent years, it is primarily aimed at non-durable retail and grocery products. In this study, we develop an integrated framework for strategic assortment planning of configurable products, with a focus on the highly complex automotive industry. The facts that automobiles are highly configurable (with the number of buildable configurations running into thousands, tens of thousands, and even millions) with relatively low sales volumes and the stock-out rates at individual dealerships (even …

Introducing Fly Ash Into Lsi's Recipe, Andrew Mathias Beckrich

All Graduate Theses, Dissertations, and Other Capstone Projects

There has been published data that states that concrete producers can use Fly Ash as an alternative to Portland cement and still generate similar or better strength properties. By applying these principles to our industry and products, what new processes will need to be put in place and followed? What is the correct combination/portion of Fly Ash that will produce similar and better results as well as the adjusted new recipes? What type of cost is associated with the introduction of this new ingredient? Lastly, how does this affect the quality and reputation of the product?

An Empirical Study On Quality Management Practices, Organization Performance And Suppliers' Selection In Southern Minnesota Manufacturing Firms, Rachel Yetunde-Abiodun Awoku

All Graduate Theses, Dissertations, and Other Capstone Projects

Quality management systems (QMS) have been widely applied successfully by many manufacturing companies to improve their process, increase profits and organizational performance. The most applied of the quality programs are ISO 9001, Total Quality Management (TQM), Just-In-time (JIT), Lean Management and Six Sigma. Although past studies on quality management have identified and studied the implementation of quality management practices, there is little or no research on quality management practices and business performance in Southern Minnesota manufacturing companies. Many researchers have concluded that the implementation of quality management practices has led to significant improvements in companies' business performance while others have …

Extending Origami Technique To Fold Forming Of Sheet Metal Products, Ala Qattawi

All Dissertations

This dissertation presents a scientific based approach for the analysis of folded sheet metal products. Such analysis initializes the examination in terms of topological exploration using set of graph modeling and traversal algorithms. The geometrical validity and optimization are followed by utilizing boundary representation and overlapping detection during a geometrical analysis stage, in this phase the optimization metrics are established to evaluate the unfolded sheet metal design in terms of its manufacturability and cost parameters, such as nesting efficiency, total welding cost, bend lines orientation, and maximum part extent, which aides in handling purposes. The proposed approach evaluates the design …

Investigation Into The Usability Of Micromechanical Models To Predict The Behavior Of A Nanocomposite Polymer, Jason Handlogten

All Graduate Theses, Dissertations, and Other Capstone Projects

The purpose of this thesis was to determine the acceptability of a set of existing nanocomposite test specimens for tensile testing and then to determine the Young's and shear modulus of these test specimens. If the test specimens were found to be acceptable, the accuracy of three micromechanical models was to be evaluated by comparing their predictions to the mechanical properties determined from testing the specimens. The set of existing nanocomposite test specimens had a distinct concave shape on two surfaces that were believed to be intended as flat. In order to determine if they adhered to the Type I …

A Study Of Solder Joint Failure Criteria, Jianbiao Pan, Julie Silk

Industrial and Manufacturing Engineering

One of the challenges in an experimental study of solder joint reliability is to determine when cracks occur in a solder joint or when a solder joint fails. Cracks in a real solder joint are difficult to identify using an X-Ray system. Cross-sectioning and scanning electron microscopy (SEM) is a destructive method. A common non-destructive test method is to monitor resistance increase in a solder joint or a daisy-chain. However, no scientific research has been done in establishing the relationship between the crack area of an interconnection and the change in resistance of the interconnection. This paper proposes a method …

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland

Industrial and Manufacturing Engineering

Electroplated Ni/Au over Cu is a popular metallization for printed circuit board finish as well as for component leads, especially wire-bondable high-frequency packages, where the gold thickness requirement for wire bonding is high. The general understanding is that less than 3 wt% of Au is acceptable in SnPb solder joints. However, little is known about the effect of Au content on the reliability of SnAgCu solder joints. The purpose of this paper is to determine the acceptable level of Au in SAC305 solder joints. Three different package platforms with different Au thicknesses were assembled on boards with two different Au …

A Digital Hydraulic Valve, Actuated Using A Piezoelectric Linear Motor, Brian C. Bevill

Purdue Polytechnic Directed Projects

Proportional control in hydraulics is widely utilized. The most widely used current types of proportional valves utilize solenoid technology. While this technology has been around for decades and has been proven an effective means of control, there is always a demand for improved performance of advancing technologies. Integrating piezoelectric devices as a means to control hydraulic systems helps advance control for hydraulic systems.

Piezoelectric stack devices have been used to control hydraulic systems with success. Advantages of these stacks include being relatively small with a high power to weight ratio, using less energy than solenoid operations, and being fast acting. …

A Study On Facility Planning Using Discrete Event Simulation: Case Study Of A Grain Delivery Terminal, Sarah M. Asio

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The application of traditional approaches to the design of efficient facilities can be tedious and time consuming when uncertainty and a number of constraints exist. Queuing models and mathematical programming techniques are not able to capture the complex interaction between resources, the environment and space constraints for dynamic stochastic processes. In the following study discrete event simulation is applied to the facility planning process for a grain delivery terminal. The discrete event simulation approach has been applied to studies such as capacity planning and facility layout for a gasoline station and evaluating the resource requirements for a manufacturing facility. To …

The Inside-Out Classroom: A Win-Win Strategy For Teaching With Technology, Daniel J. Waldorf, Lizabeth Schlemer

Industrial and Manufacturing Engineering

As costs of higher education soar and many universities face uncertain funding models, institutional pressures have increased to improve instructor efficiency. At the same time, U.S. industry leaders and leading educators have called for improvements in engineering education based on more interactive, hands-on student learning experiences. Although many efforts have been made to take advantage of technology to either improve student learning or to maintain student learning while increasing instructor efficiency, few approaches have been shown to improve both learning and efficiency. A teaching method is proposed to improve student learning and increase student satisfaction while also addressing the instructors’ …

Evolving A Summer Engineering Camp Through Assessment, Katherine Chen, Lizabeth Schlemer, Heather Scott Smith, Teana Fredeen

Industrial and Manufacturing Engineering

EPIC (Engineering Possibilities in College) is a one-week summer program for high school students (entering 9th-12th grades) to learn about engineering and experience hands-on labs in a university atmosphere. It's an opportunity for students to explore the different types of engineering available at many universities. The aim of EPIC is to expand the College of Engineering mission to K-12 students: "To educate students for careers of service, leadership and distinction in engineering or other fields by using a participatory, learn by doing, ‘hands-on’ approach".