Operations Research, Systems Engineering and Industrial Engineering Commons^™

Multiphysics Modeling Of Solid Oxide Fuel Cells For Gradient Minimization And Inductive Loop Analysis In Impedance Spectroscopy Using Machine Learning-Based Microstructural Property Estimation, Muhammad Usman Khan

College of Graduate Studies: Theses & Dissertations

Solid oxide fuel cells have significant advantages in renewable energy utilization due to their high efficiency, fuel flexibility, and low emissions. However, despite the numerous efforts of technology, thermal and current density gradients and impedance behavior fluctuations are still causing performance degradation. A combined computational framework that integrates machine learning and three-dimensional Multiphysics modeling is needed to investigate and optimize the performance of solid oxide fuel cells. A machine learning model, trained on synthetic microstructure data by percolation analysis, is used to predict important microstructural parameters like triple phase boundary density and geometric tortuosity. These are then employed in a …

Enhancing The Mechanical Properties Of Sla 3d-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers, Chukwunonso A. Ikedionu

College of Graduate Studies: Theses & Dissertations

Abstract

This research explores the development of bio resin from linseed oil by the process of epoxidation and acrylation to produce acrylated epoxidized linseed oil (AELO). Lignin and cellulose biopolymers were added as reinforcement at varying weight fractions of 1 wt.%, 2.5 wt.%, and 5 wt.%, and their mechanical performance was compared against pure AELO. The formulations were printed using an Elegoo SLA 3D printer to create standardized test specimens like tensile bars, compression cylinders, and hardness blocks, which were all prepared according to the ASTM testing standard.

The results indicate that reinforcement effects depend on both filler type and …

Ease Of Product Disassembly Through A Systematic Structured Time-Based Design For Disassembly Methodology, Emeka S. Igwe

College of Graduate Studies: Theses & Dissertations

This research introduces a systematic time-based design for disassembly (DfD) framework aimed at optimizing product disassembly by addressing important features like liaisons between components in product, component accessibility and the overall modularity of the product. This study specifically covers electromechanical and mechatronic systems in both household and industrial setup, identifying their disassembly challenges and high value pointers for improvement. The methodology involves using a design for disassembly framework called LeanDfD in carrying out a holistic disassembly process and evaluating quantitative metrics like disassembly time and complexity and suggesting further redesign strategies to minimize disassembly time and cost. Adopting this systematic …

Reliability Of An Extended Version Of The 3m™ Eargage Tool To Assess Earcanal Size And Assist Earplug Selection, Bastien Poissenot-Arrigoni, Laurence Martin, Alessia Negrini, Djamal Berbiche, Olivier Doutres, Franck Sgard

Études primaires

Objective: Evaluate the ability of an extended version of the 3 MTM Eargage to estimate the earcanal size and assess the likelihood that a particular earplug can fit an individual’s earcanal, ultimately serving as a tool for selecting earplugs in the field. Design: Earcanal morphology, assessed through earcanal earmolds scans, is compared to earcanal size assessed with the extended eargage (EE) via box plots and Pearson linear correlations coefficients. Relations between attenuation measured on participants (for 6 different earplugs) and their earcanal size assessed with the EE are established via comparison tests. Study sample: 121 participants exposed to occupational noise …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

Exploration Of The Iterative Design Process: Integrating A Requirements Matrix And Hazard Analysis Toolsexploration Of The Iterative Design Process: Integrating A Requirements Matrix And Hazard Analysis Tools, Blaine Edlefsen

Theses

The iterative design process is applied to multiple industry sectors from software development to product manufacturing. The cyclical approach integrates the steps of design, prototyping, and testing toward the realization of a user's specified needs. The use of a requirements traceability matrix and hazard analysis documentation that supports the definition of the iterative design process is explored. These design project management tools are applied to a case study involving workholding design for a Wire Electrical Discharge Machining (Wire-EDM) manufacturing process. This industry-relevant case study is conducted in collaboration with New Jersey Precision Technologies, Incorporated (NJPT). The design requirements involve both …

Sensitive Grip Mounting Surfaces For Physical Human-Robot Interaction., Branden Shay

Electronic Theses and Dissertations

As the development of robotics becomes ever increasingly present in our society, the need for studying how humans and robots interact with each other becomes more of a necessity to be properly integrated in the changing world around us. In this thesis, we undertake the study and development of how to create a tactile human-robot operator interface to guide a robot perform a physical task. The implementation of tactile interfaces such as SkinCell sensor arrays emulating skin, and of a robotic handlebar fitted with tactile sensors are critical examples of the challenges that come with mounting and packaging such sensors …

Motivating Sustainability Through The State Of Biologically Inspired Design, Bryan Watson

Sustainability Conference

There are multiple arguements for sustainability, but one that resonates with environmentalists and the public alike is the need for preservation to all us to discovery natural solutions to our problems. Common examples often given include medical discoveries, unique mechanisms, and new materials. This presentation focuses on two ideas to motivate sustainability. First, what is the current state of biologically inspired design? Is there more to learn from nature? To answer these questions, recent research is presented which examined 660 Biologically Inspired Design samples from three data sources: Google Scholar, Google News, and the Asknature.org “Innovations” database. The data were …

Gaze Tracking Embedded Collaborative Robots For Automated Metrology And Reverse Engineering, Sachithra H. Karunathilake, Md Shahriar Forhad, Zhaohui Geng

Manufacturing & Industrial Engineering Faculty Publications

Conventional geometric metrology, or three-dimensional (3D) scanning, and reverse engineering heavily rely on the experience of the operators. With an increasing need for automation, robot arms have been adopted for this task. However, due to the large variety of parts and designs, automated path planning could provide a scanning solution that may overlook the critical area, which could potentially deteriorate the scan results. This article explores the integration of collaborative robotics (cobots) with eye-tracking technology to improve the autonomous 3D scanning process. The primary objective of this study is to enhance the accuracy and efficiency of cobots in 3D scanning, …

Data-Driven Roughness Estimation Of Additively Manufactured Samples Using Build Angles, Jose Galarza, Jose Barron Jr., Farid Ahmed, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Achieving control of Laser Powder Bed Fusion (L-PBF) over the quality of the print is the main motivation for finding an optimum set of parameters in the process. Surface roughness is one of the characteristics of the print that impacts the performance of the desired functionality. This research focus is to relate the build angle with the surface roughness on the L-PBF printed specimens and utilize machine learning methods for roughness estimation of geometric features with varying build angles. The EOS M290 L-PBF printer was used to print Inconel-718 coupons using standard process parameters while varying build angles from 20 …

Prediction Of Tool Wear And Surface Finish Using Anfis Modelling During Turning Of Carbon Fiber Reinforced Plastic (Cfrp) Composites, Anil K. Srivastava, Md. Mofakkirul Islam

Manufacturing & Industrial Engineering Faculty Publications

Carbon fiber-reinforced plastics (CFRP) are widely used in various industries due to their high strength to weight ratio, corrosion resistance, durability, and excellent thermo-mechanical properties. The machining of CFRP composites has always been a challenge for the manufacturers. In this study, CNC turning operation with coated carbide tool is used to machine a specific CFRP and the relationship between the cutting parameters (Speed, Feed, Depth of Cut) and response parameters (Vibration, Surface Finish, Cutting Force and Tool Wear) are investigated. An adaptive-network-based fuzzy inference system (ANFIS) model with two multi-input–single-output (MISO) system has been developed to predict the tool wear …

Enhancing Resilience In Complex Energy Systems Through Real-Time Anomaly Detection: A Systematic Literature Review, Ali Aghazadeh Ardebili, Oussama Hasidi, Ahmed Bendaouia, Adem Khalil, Sabri Khalil, Dalila Luceri, El Hassan Abdelwahed, Sara Qassimi, Antonio Ficarella

Manufacturing & Industrial Engineering Faculty Publications

As real-time data sources expand, the need for detecting anomalies in streaming data becomes increasingly critical for cutting edge data-driven applications. Real-time anomaly detection faces various challenges, requiring automated systems that adapt continuously to evolving data patterns due to the impracticality of human intervention. This study focuses on energy systems (ES), critical infrastructures vulnerable to disruptions from natural disasters, cyber attacks, equipment failures, or human errors, leading to power outages, financial losses, and risks to other sectors. Early anomaly detection ensures energy supply continuity, minimizing disruption impacts, an enhancing system resilience against cyber threats. A systematic literature review (SLR) is …

Capacitive Sensors With Ultra-Small Capacitance For Smart Measurement And Control Systems, Rustam Baratov, Farrux Jabbor O'G'Li Ko'charov

Chemical Technology, Control and Management

This article discusses methods of low capacitance measurement of capacitive sensors. The results of the study of the amplitude-frequency (AF) and phase-frequency (PF) response of measurement circuits of capacitive sensors for low capacitances measurement, consisting of RC - differentiating elements are presented. The input and output parameters of the differentiating circuit and the complex transfer function are analyzed. The research results show that low capacitances measurement by measuring the rectangular pulses duration is the most effective measurement method.

Investigations Of Cell Tower Antennas Parameters On Reduction Of Radio Frequency Radiation Levels From Radio Base Stations, Florence U. Rashidi

Tanzania Journal of Engineering and Technology (TJET)

The widespread deployment of mobile cellular base stations in populated areas has raised public health concerns due to increased exposure to radio frequency (RF) radiation emissions. Exposure to high levels of RF radiation can have potential thermal and non-thermal biological effects. Optimizing the configuration of cell tower antenna parameters is crucial for mitigating these radiation levels. This study therefore aims at systematically investigating the influence of different cell tower antenna parameters on reducing the RF radiation levels from mobile base stations. Field measurements were conducted at two cell sites shared by multiple mobile operators. Electric field strengths were measured at …

Evaluation Of Business-Driven Reference Architecture For Big Data Analytics Implementation By Public Sector Organizations In Resource-Constrained Setting: A Case Study Of Uganda, Matendo Didas

Tanzania Journal of Engineering and Technology (TJET)

Big Data Analytics (BDA) is a new area at the nexus of agenda, public sector organizations, and government business. It may satisfy the growing need for trustworthy, cost-effective services in the public sector for better, more informed decision-making processes. BDA has been proposed on the planning schedules of several public sector organizations and the government. Therefore, from the previous work, using Uganda as a case study, specifically the Uganda Bureau of Statistics (UBOS), Ministry of Health (MoH), and Ministry of Education and Sports (MoES), this study aims to evaluate a designed Business-Driven Reference Architecture for Big Data Analytics Implementation (BRABDAI) …

Modeling The Influence Of Internal Factors On Vehicular Mobility Performance, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Traffic mobility is significantly influenced by road conditions and the internal factors governing vehicular performance. Internal factors play a crucial role in vehicular mobility, influencing vehicles operate and performance. While existing vehicular mobility models primarily address external factors, external factors such as governor, engine, gear train and differential unit remain underexplored. This study formulates a comprehensive model to address this gap, focusing on the internal components that affect vehicular mobility. The proposed model employs both analytical and numerical methods to derive transfer functions for these subsystems using Matrix Laboratory (MATLAB), aiming to capture the dynamic behavior of vehicles under various …

Necessity Of Education For Efficient And Sustainable Production And Consumption Of Energy In Tanzania, George Kahangwa

Tanzania Journal of Engineering and Technology (TJET)

This paper reports the findings of a study that was conducted in Tanzania to grasp how the policies, plans and curricula at different levels of education accommodate knowledge gathered on energy to support the fostering of energy education. The study interrogated what necessitates the inclusion of energy education into the curricula in Tanzania. Subscribing to a qualitative approach, the study employed a desk research method to review curricula and other documents guiding secondary and university level education in the country. The study found out that heightening people’s consumption of energy for domestic and industrial purposes constituted the main issue that …

Assessing The Importance Of Air-Decking Blasting In Controlling Bigv At An Open Pit Gold Mine In Tanzania Using Ann Model, Karim R. Baruti

Tanzania Journal of Engineering and Technology (TJET)

Air-decking blasting technique is used to control blast induced ground vibration (BIGV) in several mines including open-pit gold mines located in Tanzania. While the importance of air-deck to control BIGV is practically evident, theoretical models such as BIGV prediction models cannot be used to assess the importance of air-decking. The main objective of this study was to assess the importance of the air-decking blasting technique to control BIGV using the artificial neural network (ANN)Model. To achieve this objective, ANNs were modeled and trained to learn the pattern of data using Multilayer Perception with Back Propagation to predict BIGV. The main …

Inspection Planning Of Subsea Pipeline Using Risk-Based Inspection, Ni Luh Triska Adelia, Badrul Munir, Johny Wahyuadi Soedarsono

Journal of Materials Exploration and Findings

Pipelines are an important tool in oil and gas exploration. Pipeline is a transmission and liquid collection lines, including their accessories, which transport fluids from one plant to another. In transmission and collection process, there is a possibility of failure which can have minor to major impact on personnel injury, the environment and interrupt the business process. To maintain safety and to prevent accidents, the source and cause of failure needs to be calculated. Risk-based inspection (RBI) is a method that can be used to calculate the risk and determine the inspection planning both schedule and method, by combining the …

Maintenance Notes To Improve The Reliability Of Wheel Flange Failure For Overhead Crane, Fakhri Burhanuddin, Akhmad Herman Yuwono

Journal of Materials Exploration and Findings

Overhead traveling cranes in the industry have utility workload classifications and require high standards of safety and reliability by mobilizing lifting and transporting capacity variants of steel products, equipment, and other supports. The crane wheels are the main support in moving the end carriage so that the crane can work according to its function. Failures in the operation and maintenance cycle have occurred. Therefore, proper repair and maintenance methods are highly needed to restore the original design function to its working integrity. Logic tree analysis was used to breakdown all causes of failure; thus, mitigation was performed by carrying out …

Analysis Risk Based Inspection Api 581 On Lpg Spherical Tank At Pt. Xyz, Sigit Trahmawan, Eddy Sumarno Siradj, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

Liquified petroleum gas (LPG) spherical tanks are pressure vessel equipment for storing fuel gas products. The high pressure along with the fuel gas inside as flammable and combustible substance means that this equipment might result major accident hazard such as explosion, fires and environmental pollution. This study is aimed calculated and mitigate risk on 500 metric ton capacity LPG spherical tank using Risk-based inspection (RBI) analysis method that makes risk as its foundation. This RBI method uses quantitative analysis referring to API 581 to determine the risk of LPG Spherical Tank by determining the probability of failure (PoF) and the …

Lifetime Prediction Of Pan Feeder Based On 3d Laser Scanning For Wear Assessment, Nony Maulidya, Dedi Priadi, D. Rizal Asral

Journal of Materials Exploration and Findings

Apron feeder is one of stages in crushing circuit to convey material in short distance. Pan flight is the main component of apron feeder that is severely exposed to wear mechanism due to its direct contact with open cut abrasive ore. With this operating environment of apron feeder, regular maintenance and inspection must be conducted to assess wear rate of pan’s surface to maintain equipment availability and provide information and sign before the equipment undergoes severe and sudden degradation. 3D laser scanning is method used in this study as Non-Destructive Testing (NDT) based inspection. The aim of using 3D scanning …

Dynamic Model Of An Overhead Crane, Leonard Ruesga

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this thesis a novel spatial model of an overhead crane was developed. The model includes: bridge, trolley, driving and follower wheels for the bridge and trolley, drum, cable, and the payload. The model accounts for the winding/unwinding of the cable around the drum as the payload is raised/lowered. The cable and the payload were considered as rigid bodies with uniformly distributed mass. First, the kinematic equations of the model were developed by using constraint equations. Second, the dynamic equations were derived through use of Newton’s Laws. Developing the rotational dynamic equations required the determination of the angular momentum vectors …

A Survey On Fused Filament Fabrication To Produce Functionally Gradient Materials, Arup Dey, Monsuru Ramoni, Nita Yodo

Manufacturing & Industrial Engineering Faculty Publications

Fused filament fabrication (FFF) is a key extrusion-based additive manufacturing (AM) process for fabricating components from polymers and their composites. Functionally gradient materials (FGMs) exhibit spatially varying properties by modulating chemical compositions, microstructures, and design attributes, offering enhanced performance over homogeneous materials and conventional composites. These materials are pivotal in aerospace, automotive, and medical applications, where the optimization of weight, cost, and functional properties is critical. Conventional FGM manufacturing techniques are hindered by complexity, high costs, and limited precision. AM, particularly FFF, presents a promising alternative for FGM production, though its application is predominantly confined to research settings. This paper …

Spectral Behavior Of Fiber Bragg Gratings During Embedding In 3d-Printed Metal Tensile Coupons And Cyclic Loading, Farid Ahmed, Md Shahriar Forhad, Mahmudul Hasan Porag

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing (AM) enables the spatially configurable 3D integration of sensors in metal components to realize smart materials and structures. Outstanding sensing capabilities and size compatibility have made fiber optic sensors excellent candidates for integration in AM components. In this study, fiber Bragg grating (FBG) sensors were embedded in Inconel 718 tensile coupons printed using laser powder bed fusion AM. On-axis (fiber runs through the coupon’s center of axis) and off-axis (fiber is at 5° and 10° to the coupon’s center of axis) sensors were buried in epoxy resin inside narrow channels that run through the coupons. FBGs’ spectral evolutions …

How Ai And Digitalization Can Help To Improve Managing Projects In Lean Manufacturing & Supply Chain Environment, Abhijeet Hange

Harrisburg University Dissertations and Theses

This research examines how digitalization and machine learning (ML) revolutionize project management in supply chain and lean manufacturing settings. To improve the efficiency and caliber of their operational procedures, Acuity Brands, Amazon, Walmart, Apple, and other medium-sized businesses—which are at the center of today's competitive markets—are resorting to automation and digitalization. With an emphasis on the fusion of digital and artificial intelligence (AI), the paper explores how successful transformation initiatives are essential to the automation and digitization of manufacturing and distribution hubs. The study uses quantitative methods approach to evaluate the benefits and drawbacks of these technology integrations by integrating …

Comparing Life-Cycle Dynamics Of Li-Ion Batteries (Libs) Clustered By Operating Conditions With Sindy, Kristen L. Hallas, Md Shahriar Forhad, Tamer Oraby, Benjamin Peters, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Lithium-ion batteries (LIBs) play a big part in the vision of a net-zero emission economy, yet it is commonly reported that only a small percentage of LIBs are recycled worldwide. An outstanding barrier to making recycling LIBs economical throughout the supply chain pertains to the uncertainty surrounding their remaining useful life (RUL). How do operating conditions impact initial useful life of the battery? We applied sparse identification of nonlinear dynamics method (SINDy) to understand the life-cycle dynamics of LIBs with respect to sensor data observed for current, voltage, internal resistance and temperature. A dataset of 124 commercial lithium iron phosphate/graphite …

Using Sustainable Technique To Recycle Waste Paper In Academic Institutions, Mustafa M. Mansour

Al-Bahir

It has been clearly demonstrated that it would be feasible to consider recycling paper in an academic institution. This can be achieved through combining specific waste paper baskets, a pulping machine and power supplied by a renewable energy source, with an already established local paper making company. The paper making company would be able to gain a subsidy from the government which pays them to actually recycle paper, to counteract the cost of the pulped paper which is 30% more expensive than raw wood pulp. The academic institution would save money on waste disposal and decrease its carbon footprint by …

A Screening Life Cycle Analysis Of One-Way And Reusable Crate Designs – Estimating Environmental Impacts Via Lca Software, Nicolas R. Corona

Master's Theses

A comparison analysis conducted via COMPASS life cycle analysis software has indicated that a one-way crate design, rather than a reusable crate design, is in fact the more environmentally friendly packaging system. These results can be interpreted differently, however, as the manufacturer of said crate designs must confirm what impact indicators they would like to reference as environmental goalposts. The conducted analysis provides insight into what the environmental impacts of each packaging system look like as packaging at all three system levels has been identified as a means of reducing environmental impacts globally. As such, the manufacturer of said crate …

Smart Manufacturing For Cal Poly's Ime Curriculum, Grace L. Guarraia, Eric F. Ledesma

Industrial and Manufacturing Engineering

California Polytechnic State University, San Luis Obispo (Cal Poly) takes pride of supporting one of the nation’s strongest undergraduate Industrial and Manufacturing Engineering programs. However, as industry evolves to accommodate advancing computing power, improved manufacturing algorithms, and improved robotics, it is imperative that Cal Poly’s curriculum evolves in parallel. Smart manufacturing is the future of the manufacturing industry, and Cal Poly is searching for the ideal method to teach and integrate Smart Manufacturing into its classes. With its upcoming switch to the semester system, coupled with its “Learn by Doing” motto, the department is at an ideal period for the …