Operations Research, Systems Engineering and Industrial Engineering Commons^™

Expansion Of The Functionality Of Discrete Fiber-Optic Liquid Level Sensors, Azimjon Mamadaliyevich Khusanov, Yuriy Gennadyevich Shipulin

Chemical Technology, Control and Management

The article examines the problems and prospects of creating discrete fiber-optic liquid level gauges. Functional diagrams of single-channel and multi-channel discrete fiber-optic liquid level meters are presented. Examining the challenges of keeping this system running continuously reveals that sustaining its required reliability necessitates replacing malfunctioning measurement systems with operational ones. Investigations into differential equation models demonstrate that system recovery and failure events occur independently and follow a Poisson distribution pattern.

Improving Self-Diagnostic Methods Of Flow Measurement Systems Based On Artificial Intelligence, Elbek Ortikov

Chemical Technology, Control and Management

The article examines methods for improving self-diagnostics of consumption measurement systems based on artificial intelligence in the context of industry digitalization and the development of cyber-physical systems. It has been shown that traditional flow meters used to measure the flow rate of liquids and gases are subject to mechanical, hydraulic, electronic, and hidden failures, which reduce the accuracy and reliability of measurements. A justification for the need to transition from classical maintenance methods to intelligent self-control methods that ensure the detection of anomalies and hidden malfunctions in real time is presented. A multi-level architecture of intelligent self-diagnosis is proposed, including …

Improvement Of Technology And Control And Management Systems Of The Plant Oil Refination Process, Elyor Samadov

Chemical Technology, Control and Management

The article examines modern approaches to modernizing vegetable oil refining processes from the perspective of increasing energy efficiency, environmental friendliness, and final product quality. Traditional and innovative technologies are analyzed, with a focus on the implementation of membrane filtration, automated control systems, heat exchange complexes, and renewable energy sources. It has been shown that the use of intelligent control systems, high-precision membrane filters, and heat regeneration allows for a 25% reduction in energy consumption, a 20% reduction in greenhouse gas emissions, and a significant improvement in acidity, color, and impurity content in the product. The obtained results show the effectiveness …

Design Of A Fuzzy Set-Point Tracking Controller Based On The State-Dependent Control Characteristics Of Fuzzy Logic And Pid For Temperature Control Systems In Electrical Equipment, Rahim Mammadzada

Chemical Technology, Control and Management

This paper presents a Fuzzy-SPT (Fuzzy Set-Point Tracking) controller designed to combine the strengths of FLC (Fuzzy Logic Control) and PID (Proportional-Integral-Derivative) control while mitigating their limitations across varying operating conditions. Inspired by state-dependent reasoning but implemented within a single controller, the method uses internal logic to adapt the control effort across different operating regions. FLC handles rapid changes and nonlinear transients, enabling fast system response without overshoot, while PID-like integral action is activated when the FLC reaches steady state or enters a threshold region near the set point, eliminating residual errors and maintaining stable performance. By applying each behavior …

Empirical Analysis Of Machine Learning Models For Predicting Equipment Failures Using Iot Sensor Data, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

This article examines the problem of detecting and predicting industrial equipment faults using IoT sensor data through machine learning techniques. Sensor readings such as temperature, vibration, pressure, voltage, and current, as well as FFT-based features, were statistically analyzed. Class imbalance and low signal informativeness were identified as key factors limiting model accuracy. Results obtained from Logistic Regression, Random Forest, and XGBoost models were comparatively evaluated, showing that when ROC-AUC values remain around 0.5, distinguishing fault and non-fault states becomes challenging. Correlation and feature-importance analyses confirmed the absence of strong dominant indicators. The findings highlight the need to improve sensor architecture …

Current Trends In Industrial Gas Furnace Control And Monitoring Systems, Utkir Uktam O'Gli Kholmanov

Chemical Technology, Control and Management

This paper presents a critical review of modern control methods applied to industrial gas-fired furnaces. Conventional PID controllers and their advanced modifications, including Advanced Process Control (APC) and cascade control schemes, are analyzed alongside Model Predictive Control (MPC) approaches. In addition, intelligent control algorithms—such as fuzzy logic and neuro-fuzzy systems (Fuzzy, ANFIS)—are examined. The study also considers advanced sensing technologies, including Tunable Diode Laser Absorption Spectroscopy (TDLAS), acoustic pyrometry, and infrared pyrometers, as well as digital twins and CFD-based modeling techniques. Particular attention is given to a comparative evaluation of control strategies based on key performance criteria, including energy efficiency, …

Skeleton-Based Human Action Recognition Using Spatio-Temporal Latent Features With A Gcn Model, Avazjon Marakhimov, Kabul Khudaybergenov, Mominov Zakhriddin

Chemical Technology, Control and Management

Owing to its resilience to visual noise and viewpoint variations, skeleton-based analysis has become a cornerstone of human action recognition research. Despite its practical significance, existing methodologies often suffer from a reliance on single-stream skeletal representations, which fail to encompass the full complexity of action features. This study introduces Latent Features for Human Action Recognition (LFHAR), a novel architecture designed to overcome these limitations by utilizing diverse spatio-temporal latent representations for improved feature extraction. The approach applies graph-based transformations to individual skeletal frames in temporal sequences, then arranges the derived graph features into spatio-temporal matrices. Evaluation of standard datasets demonstrates …

Performance Assessment Of Operators Under Digital Simulator-Based Training In Automated Industrial Systems, Kamola Abdullaeva

Chemical Technology, Control and Management

This article proposes a comprehensive approach to training process operators, based on computer simulators integrated with digital twins, SCADA/DCS systems, real production data, and artificial intelligence algorithms. This approach is particularly relevant given the increased requirements for safety, productivity, and reliability of industrial facilities, as human factors are often the main cause of accidents (up to 60-80% of cases). The architecture of the simulator complex is designed to accurately emulate steady-state, transient, and pre-emergency operating modes of equipment, which are not achievable under actual production conditions. The experiment compared the training effectiveness of two groups of operators: one that used …

Developing A Waste-To-Energy Assessment Framework Integrating Engineering And Policy Dimensions Using A Triple Bottom Line Approach, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The management of municipal solid waste (MSW) in swiftly urbanizing Philippine cities has emerged as a critical concern in both energy and governance. Dependence on landfills is approaching critical thresholds as disposal sites near saturation, transportation costs escalate, and host communities increasingly resist garbage transfers. In response, this study proposes a comprehensive Waste-to-Energy (WtE) assessment framework that integrates engineering evaluation with policy and stakeholder analysis to support sustainable decision- making.

Using Baguio City as a case study, the framework applies a Triple Bottom Line (TBL) approach to evaluate three waste management scenarios: (1) current landfill-dominated practices, (2) engineered landfill with …

Application Of Natural Language Processing And Machine Learning For Analyzing Mining Accident Reports And Automating The Process Of Root Cause Analysis, Siddhartha Agarwal, Y. P. Chugh, Atul Singh, Vikram Sakinala, Ayan Mukherjee, Balbir Prasad, Cihan Dagli, Yuhao Zou

Engineering Management and Systems Engineering Faculty Research & Creative Works

Coal mining accidents are a major concern worldwide, necessitating effective safety measures and comprehensive analysis to prevent future accidents. Our proposed solution is the first attempt for Indian mines, inspired by the potential of Natural Language Processing (NLP) that can read and analyze vast repositories of accident records in seconds. In combination with machine learning (ML), NLP algorithms can extract unstructured text by eliminating manual data entry errors, reading poorly scanned reports, and understanding multiple versions of the event and cluster documents based on types that would otherwise take months to collate. In the case of accident records, it can …

Data-Driven Evaluation Of Sustainable Waste-To-Energy Pathways For Intelligent Urban Systems, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The handling of municipal solid waste (MSW) in swiftly urbanizing Philippine cities poses intricate energy and governance challenges. In Baguio City, reliance on landfills has reached critical levels due to diminishing capacity, rising transport costs, and opposition to trash transfers by nearby LGUs. Although shaped by unique topographical and governance constraints, Baguio’s situation reflects issues faced by other rapidly growing Philippine cities; therefore, analyzing it offers insights for national MSW decision-making. This study applies a triple bottom line (TBL) framework to assess three management scenarios: (1) Status Quo, where all MSW is landfilled with no energy recovery; (2) Landfill with …

User Interface And Watchstation Improvements Required For Multi-Vehicle Usv Operations, Val Schmidt, Joshua Bergeron

Faculty Publications

In October 2024, the University of New Hampshire and NOAA’s Uncrewed Systems Office embarked on a mapping mission in the Gulf of Maine, simultaneously operating two DriX Un-crewed Surface Vehicles. Goals of the project were focused on testing hypotheses related to concepts of operation, including the safety of operations, cognitive loading of operators, management of vehicle endurance, vehicle logistics, maintenance and field support, refueling and a host of others.

Modern Significance And Development Trends In The Production Of Vegetable Oils, Umidjon Ruziev, F.O. Qosimov, M.K. Shodiev

Chemical Technology, Control and Management

This article provides a comprehensive analytical review of the current state of the global vegetable oil production market. It describes the diversity of raw materials supplied, which includes both traditional and emerging fat sources. The paper also describes the technological stages of production, emphasizing modern innovations that contribute to more efficient, high-quality, and safe production. The article also covers global trends by comparing production dynamics between countries, highlighting regions with the highest rates of production growth and explaining the reasons for their competitive advantages. Particular attention is paid to environmental and socio-economic aspects, including sustainable land use, certification, carbon footprint, …

Intelligent Decision-Making Systems In Smart Greenhouses, Muso Berdiyor Ugli Allanov

Chemical Technology, Control and Management

Smart greenhouses offer a solution to sustainable food production under climate uncertainty, yet their management often depends on fixed rules or human intuition. This study proposes an intelligent decision-making framework that integrates optimization, simulation, and a neural set into a self-learning system. By generating “conditionally real data” through simulation and evolutionary algorithms, the system can predict microclimatic changes and optimize control of water, energy, and nutrients. Continuous digital feedback enables adaptive, data-efficient operation even with limited real data. Experimental results demonstrate reduced resource use and improved yield stability, advancing the development of autonomous and resilient greenhouse ecosystems.

Development Of Fire Prediction And Prevention Digital System Algorithms, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

This research work is devoted to the development of algorithms for a digital system aimed at early detection, prediction and prevention of fire hazards. In the work, the process of fire hazard assessment is modeled on the basis of modern information technologies and artificial intelligence tools. The main focus is on collecting data in real time, analyzing it and creating algorithms that determine the level of danger. In the process of research, methods of data cleaning, normalization and determination of correlation between variables were used to process multidimensional data streams obtained from various sensors (temperature, smoke, gas concentration and humidity …

The Use Of Diagnostic And Restructuring Methods To Build Reliable Management Systems, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

This article is devoted to the applied analysis of diagnostic and restructuring methods aimed at ensuring the reliability of control systems in the event of failures. The paper considers practical implementations of diagnostic and control algorithms using a servo drive setup as an example. The results of experiments are presented, demonstrating the system's behavior under various fault conditions. A comparative analysis of the effectiveness of the proposed solutions is carried out in terms of stability and operational accuracy. The obtained data confirm the feasibility of using adaptive control structures to increase the fault tolerance of technical systems. The article concludes …

Investigation Of The Fuel Combustion Process In Gas-Fired Furnaces For Automation Systems, N.R. Yusupbekov, Sh.M. Gulyamov, A.T. Rajabov, U.U. Kholmanov

Chemical Technology, Control and Management

The regularities of the combustion process of gaseous fuel in chamber furnaces are described. This process represents a homogeneous reaction in which there is no distinct boundary surface between the fuel and the oxidizer. It is shown that the latter either mix and then burn subsequently, or both processes occur simultaneously, corresponding respectively to kinetic and diffusion combustion. The structure of a turbulent-diffusion flame of gaseous fuel combustion is presented.

Analysis Of A Cloud-Based Robot Motion Planning System, Yusif Mardanzade, Latafat Abbas Gardashova

Chemical Technology, Control and Management

As a result of the integration of cloud computing technologies into the field of robotics, the concept of "cloud robotics" has emerged. Unlike traditional robots, cloud-based robot systems remove computation, memory, and even some software from the local device and rely on remote resources obtained over the network. This approach ensures that robots are not limited only by their internal computing capabilities and allows them to take advantage of the wide range of opportunities offered by the cloud infrastructure. As a result, robots have access to large databases, highly parallel computing, and collective learning capabilities anytime and anywhere. In addition, …

Algorithms For The Synthesis Of A Temperature Control System For The Inner Tube Heat Exchanger With A Steam Jacket, H.Z. Igamberdiyev, Jasur Sevinov, U.F. Mamirov, Sh.M. Abdishukurov

Chemical Technology, Control and Management

The synthesis of a feedback propagation control law for an inner tube heat exchanger with a steam jacket is addressed in this text. A controller has been developed that, based on temperature measurements taken at four points. The maintains the output temperature at a specified level by acting on the steam jacket temperature. To determine the parameters of the plant, a linear quadratic optimal (LQ-optimal) algorithm is employed. In the considered case, the optimal controller includes a proportional–integral (PI) component, as well as an additional term that requires storing the control input over the current interval for its computation. The …

Intelligent Method Of Dynamic Control For A Class Of Stochastic Nonlinear Systems, Isamidin Khakimovich Siddikov, Davronbek Abdalimovich Khalmatov, Gulchekhra Rakhimjanovna Alimova, Dilnoza Rakhmanovna Khushnazarova

Chemical Technology, Control and Management

The paper considered the problems of researching the stabilisation system and backstepping control of stochastic nonlinear systems. The characteristics of stochastic nonlinear dynamic control systems are random signals with normal lawful distribution, which significantly complicates task control. In stochastic control, it is necessary to determine the trajectories of the control variables in order to achieve the desired control objective at minimum cost. Since the mathematical equations of stochastic nonlinear systems are not always constant, not every model-based controller can be accurate. Therefore, in this work, a neuro-fuzzy network is used to evaluate the parameters of the control system with backstepping, …

Reinforcement Learning In A Virtual World: A Study Of Ppo And Sac Within Unity Ml Agents, Rufat Mammadzada

Chemical Technology, Control and Management

This study explores the use of Unity3D as a versatile platform for developing, training, and evaluating intelligent agents through reinforcement learning. Leveraging the Unity ML-Agents Toolkit, a dynamic 3D environment was created to examine agent learning behavior using two advanced algorithms: Proximal Policy Optimization (PPO) and Soft Actor-Critic (SAC). The simulation environment consisted of navigable terrain bounded by red borders, with collectible blue balls serving as rewards and a purple cube representing the agent. A carefully designed reward system was implemented to encourage goal-directed behavior and penalize inefficiency, while time constraints introduced an additional challenge requiring both precision and speed. …

Adoption Of Agrivoltaics In Developing Countries: A Review On Challenges, Opportunities And Future Prospects, Abdi J. Athumani, Pater Makolo

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a review of agrivoltaics technology and how it has been applicable in developing countries, including African countries. Agrivoltaics, the integration of agricultural production with photovoltaic energy generation, offers promising solutions to water- energy-food nexus in developing countries. This technology offers the dual benefit of increasing agricultural productivity while generating clean energy, which is very important for regions facing frequent electricity shortages and declining agricultural yields due to climate change. However, despite its potential, the adoption of agrivoltaics in developing nations remains limited in comparison to developed countries due to financial, technical and policy constraints. This paper explores …

Resilience Engineering Via Bifurcation And Ecological Network Analysis: Demonstrated In An Electric Power Case Study, Rogelio Gracia Otalvaro

Doctoral Dissertations and Master's Theses

Modern systems are increasingly complex, interconnected cyber-physical systems that combine digital controls with physical infrastructure. This integration, along with the constant introduction of new technologies and actors into the network, enables reliable operation but introduces vulnerabilities to unexpected and varied disruptions and cascading failures, making resilience a critical concern. Traditional risk management and resilience assessment methods often struggle with the nonlinearity and dynamic behavior of these systems. This dissertation proposes a novel approach combining Bifurcation Analysis (BA) and Ecological Network Analysis (ENA) to enhance the understanding and improvement of system resilience. BA, a mathematical method from dynamical systems theory, is …

Detecting Electrical Submersible Pump (Esp) Failures And Estimating Run Life Using Artificial Neural Networks, Mostafa Ahmed Sobhy

Theses and Dissertations

Electric Submersible Pumps (ESPs) are one of the important artificial lift methods for sustaining production in mature and high-water-cut wells; but may suffer frequent failures due to mechanical, electrical, hydraulic, chemical, and operational failures. These failures can yield substantial deferred production and intervention costs. Plenty of ESP installations are fitted with downhole sensors. Yet, it is observed that the current industry practice underutilizes the wealth of available sensor and operational data and lacks standardized, explainable failure-type identification and classification.

In this thesis, a comprehensive Machine Learning (ML) and Deep Learning (DL) framework was introduced for ESPs that simultaneously estimates remaining …

Optimizing Beer Fermentation Through Intelligent Control, Azizbek Nodirbekovich Yusupbekov, Mirjalol Yusupov

Chemical Technology, Control and Management

This paper presents an intelligent control approach for optimizing the beer fermentation process using fuzzy logic and adaptive neuro-fuzzy inference systems. By incorporating multivariable inputs—temperature error and pH deviation—the proposed system effectively handles the nonlinear dynamics and biological variability inherent in fermentation. Simulation results demonstrate improved control accuracy, responsiveness, and robustness compared to conventional methods, making the approach suitable for integration in modern brewery automation systems.

Application Of Neural Networks For Intelligent Processing Of Sensor Signals In The Control Of Technological Process Parameters, N.R. Yusupbekov, Yu.Sh. Avazov, G.Kh. Rashidov

Chemical Technology, Control and Management

This scientific article investigates the problem of analyzing technological process parameters in the fields of chemistry, energy, and metallurgy based on sensor data and applying intelligent signal processing methods. The main objective is to evaluate the effectiveness of artificial intelligence and deep learning models for intelligent analysis, forecasting, and anomaly detection of data obtained from sensors. Time-series data collected from industrial sensors were analyzed using LSTM (Long Short-Term Memory) and Autoencoder neural networks, as well as the Kalman filter. At the first stage of the study, sensor signals were denoised and their true state was estimated using the Kalman filter. …

Finding The Shortest And Optimal Path With Metaheuristic And Madm Methods, Narmin Ibrahim Hasanli

Chemical Technology, Control and Management

The article had described a method for finding the shortest and most optimal path among cities. The data had been taken from the TSPLIB library, which had provided standard examples for the Traveling Salesman Problem. This approach had integrated the advantages of the meta-heuristic technique and the Multi Attribute Decision Making method to solve the problem effectively. In the first stage, the population based meta-heuristic method ACO (Ant Colony Optimization) had found optimal solutions in large search spaces. The use of pheromone trails, heuristic information and an iterative search process had given the opportunity to find the best or near-best …

Modeling Of Urea Drying And Granulation Process In Fluidized Bed, Jalolitdin Pakhritdinovich Mukhitdinov, Aleksey Viktorovich Schulz

Chemical Technology, Control and Management

This article is devoted to the mathematical modeling of urea drying and granulation processes in a fluidized bed. A brief description is provided for the functional blocks included in the mathematical model, along with the required parameters that form an integrated representation of the technological process. The SR-POLAR model is used to describe a phase equilibrium between the components involved. The interconnections between functional blocks are shown in the process flow diagram. Block diagrams for modeling a multi-chamber granulation unit and the cooling system for the resulting granules are presented. Granule growth in the fluidized bed is described using a …

Algorithms For Assessing Soil Salinity Levels Based On Remote Sensing Imagery, Bobomurod Mamitjonovich Tojiboev

Chemical Technology, Control and Management

This article investigates methods for assessing soil salinity levels based on satellite (remote sensing) imagery and their calculation algorithms. Determining the degree of salinity plays a crucial role in the rational use of land resources and increasing agricultural efficiency. The study analyzes indices for determining soil salt content using remote sensing technologies, particularly multispectral images obtained from satellite systems such as Landsat and Sentinel (for example, SI - Salinity Index, NDVI - Normalized Difference Vegetation Index, and others). Furthermore, algorithms are developed based on these indices that enable automatic determination of salinity assessments. Artificial intelligence, machine learning, and geographic information …

Research And Development Of Intelligent Measurement Systems, Odil Abdujalilovich Jumaev, Mahmudov Giyosjon Baqoyevich

Chemical Technology, Control and Management

The article discusses modern methods for developing intelligent measuring systems. Intelligent measuring systems are systems based on intelligent technologies that not only accurately measure physical or chemical quantities, but also have the ability to self-analyze, diagnose and make management decisions. The article comprehensively examines the architecture, components of such systems, the organization of their software and hardware, the relationship of sensors and artificial intelligence algorithms. It also analyzes the practical application and prospects of intelligent measuring systems in such areas as industry, medicine, energy, ecology, transport.