Operations Research, Systems Engineering and Industrial Engineering Commons^™

Analysis Of Grain Product Drying Methods, Azizbek Nodirbekovich Yusupbekov, Dilmurod Egamberganov

Chemical Technology, Control and Management

Various drying methods and grain characteristics have been studied. The advantages and disadvantages of various grain drying methods were obtained. The use of the following methods of drying grain products is very useful for speeding up the drying process, reducing waste, achieving more flexible process management and delivering all the nutrients of dried grain and grain products to the subsequent production process. The technological approaches that increase the efficiency of high-quality production after drying grain products, the requirements for modern grain dryers have analyzed. The ways of overcoming the problem of high energy consumption in the process of drying grain …

Implementation Of Distance Learning At Universities Using The Experience Of The Honeywell Process Control Laboratory At Tashkent State Technical University, Nodirbek Rustambekovich Yusupbekov, Adilov Tulkunovich Farukh, Isakova Ismailovna Sitora

Chemical Technology, Control and Management

The experience of modernization of the Honeywell Process Control Laboratory at Tashkent State Technical University has been considered (which is equipped with upgraded equipment (simulators for simulating various technological processes, distance learning tools). As a result, the quality of the demonstration of process control mechanisms increased the availability of theoretical and practical knowledge in the field of automated control systems. They also considered the teaching methods necessary for a modern student – remote access in real time, when students pass a knowledge test, consult with teachers, etc.

Error Of Contactless Converters Of High Currents Of Monitoring And Control Systems From The Influence Of Currents Of Neighboring Buses, A.M. Plakhtiev, Gayratjon Gaziev, Y.A. Meliboev, O. Doniyorov

Chemical Technology, Control and Management

The article presents the general principles of construction of contactless ferromagnetic converters of large direct currents, the main requirements for them, and the results of the development of one of the developed wide-range magnetomodulation contactless converters of control and control systems concerning large electric power facilities. The developed converter, unlike the known ones, have a wide range of controlled currents, increased accuracy and sensitivity, a technological design, and small weight and dimensions at low material consumption and cost. The errors of contactless wide-range magnetomodulation converters from the influence of currents of neighboring buses connected by and the opposite direction are …

Implementation Of The Pid Control Law Of A Multidimensional Dynamic System, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

Most industrial automation facilities are multi-circuit with a significant influence of cross-links between the goals. The paper develops a system for automatic parameter adjustment of a programmable logic controller that implements the proportional-integral-differential control law of a multidimensional dynamic object. The issues of decentralized management of multidimensional dynamic objects are discussed. The control system is based on the method of independent synthesis with static compensation of the impact of cross-links. Additional software has been developed to determine the parameters of the control system. After setting the necessary parameters, the process of automatic adjustment of the controller parameters starts. Self-tuning procedures …

New Methods In Wavelet Analysis For Applications Of The Wavelet Transform, Jeffrey D. Williams

Theses and Dissertations

A commonality in the many applications and domains where signal processing (SP)is applied is the detection of events. Detection in SP requires the identification of the occurrence of an event, within a signal, and distinguishing the occurrence from no event. In a classical application of SP, seismologists seek to detect abnormalities in an electromagnetic (EM) signal to detect or not detect the occurrence of an earthquake, represented as an anomalous EM pulse. Since many signals are noisy, such as those produced by a seismograph, it can be challenging to distinguish a significant EM pulse from incident noise. In SP, smoothing …

Collaborative All-Source Navigation With Integrity, Jonathon S. Gipson

Theses and Dissertations

The novel ARMAS-SOM framework fuses collaborative all-source sensor information in a resilient manner with fault detection, exclusion, and integrity solutions recognizable to a GNSS user. This framework uses a multi-filter residual monitoring approach for fault detection and exclusion and is augmented with an additional "observability" EKF sub-layer for resilience. We monitor the a posteriori state covariances in this sub-layer to provide intrinsic awareness when navigation state observability assumptions required for integrity are in danger. This is used to selectively augment the framework with offboard information to preserve resilience. By maintaining split parallel collaborative and proprioceptive estimation instances and employing a …

Problems Of Modeling And Control Of The Technological Process Of Ore Grinding, Djalolitdin Pakhritdinovich Mukhitdinov, Sanjar Boybutayev

Chemical Technology, Control and Management

The article analyzes the methods of mathematical modeling of the closed-loop process of fine grinding of ore in order to predict the composition of the crushed raw material. Analyzed modeling methods that consider the control of classification of crushed raw materials and finished products by the size of the recirculating load, simulation modeling methods, methods that use neuro-phase netthe research apparatus, in which the fuzzy logic apparatus serves as a fundamental component for the formation of conclusions. The materials presented in the article reflect the theoretical substantiation and generalization of the accumulated practical experience in modeling and control of the …

Structural-Parametric Analysis And Synthesis Of Control Systems With Two Degrees Of Freedom, Azizbek Nodirbekovich Yusupbekov, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

Automatic tuning of the parameters of PID - regulators is proposed by means of a modified experiment that takes into account the influence of elements and circuits in the form of additive uncertainty. The use of a multiply connected control scheme with two degrees of freedom for decoupling is proposed in order to facilitate the implementation of a mechanism for combating the phenomenon of integral saturation. Equations are derived for the transition from a circuit with one degree of freedom to a circuit with two degrees of freedom for the general and special cases of a two-dimensional system, which makes …

Algorithm For The Synthesis Of The Control System Of A Double Mass Elastic Dynamic Object, Isomiddin Khakimovich Siddikov, Gulchekhra Rakhimjonovna Alimova, Davronbek Abdalimovich Khalmatov

Chemical Technology, Control and Management

There are dealt with the creation of a control system for a dynamic object with an elastic property, described by a system of second-order differential equations, further transformed into two polynomial equations in matrix form in a paper. In order to solve the problem of synthesizing the control system, two matrix polynomials with unknown parameters were introduced into the system of equations, which is the transfer function of the controller, the order of which is two, giving the system the properties of astatism. To solve the delivered problem posed, the matrix polynomial equation was transformed into a matrix linear equation …

Preparation Of Meta-Nitrobenzoylhydrazone Ferrocenoylacetone And Synthesis On Its Basis, Zilola Abduraxmonovna Sulaymonova, Bako Bafayevich Umarov Doctor Chemical Science, Professor

Chemical Technology, Control and Management

β-diketone-ferrocenoylacetone was obtained by Claisen condensation. Meta-nitrobenzoylhydrazone of ferrocenoylacetone (H₂L) was synthesized by the interaction of meta-nitrobenzoic acid hydrazide with ferrocenoylacetone. On its basis, complexes with copper(II) and nickel(II) ions were synthesized. The obtained compounds were characterized by the methods of elemental analysis, IR-, ¹H NMR andelectronic spectroscopy. The research results showed that H₂L in solution exists in the form of a tautomeric mixture: hydrazone, α-hydroxyazine, and cyclic 5-hydroxypyrazoline forms. According to the results of IR and ¹H NMR spectra, the complexes were assigned a planar-square structure, and in them the doubly deprotonated …

Application Of Methods Of Intermittent Ventilation Of Industrial Premises Using A Digital Data Transmission System, Yuriy Shipulin, Abdullayev Temur, Jamolidin Usmanov, Shahnoza Ergasheva

Chemical Technology, Control and Management

The article is devoted to topical applied issues, the application of methods of intermittent ventilation of industrial buildings using a digital data transmission system. The requirements for the parameters of the environment are determined, which include: composition, purity, temperature, air humidity, the content of positive and negative ions, the presence of fields of various origins (thermal, optical, biological, gas, and electromagnetic). The authors of the article argue that some of the listed parameters can be supported by ventilation and air conditioning (SCA) systems.

It is shown that when the controlled parameters are limited to a multidimensional area, the SCA control …

Algorithms For Controlling The State Of Executive Mechanisms, Farkhod Kasimov, Mirkhalil Ismailov

Chemical Technology, Control and Management

When constructing automatic control systems, the main attention often is paid to determining the optimal parameters of system regulators than other elements that make up the system. The executive mechanisms also significantly affect the function quality of the control system. In this article, the actuators were considered as a sub-system within the control system and control algorithms with open and closed-loop communication relative to the actuators were investigated. To assess the real state of the actuators, and improved control structure with sensors installed on the moving parts has been developed. For this structure, an algorithm for evaluating and controlling the …

Artificial Neural Networks For Measuring The Moisture Of Bulk Materials, Erkin Uljaev, Shohrux Nurali O‘G‘Li Narzullayev

Chemical Technology, Control and Management

One of the urgent tasks of industrial production is improving the quality of verification of received, manufactured, and stored products, reducing energy consumption in the production of a final product. The solution to this problem is impossible without the creation of devices that control the quality indicators of materials within the limits of the permissible error. One of the most common indicators of the quality of bulk materials is moisture. In the national economy and industrial production, it is required to determine the moisture content of more than 500 different substances and materials. The paper shows the possibility of using …

Analysis Of Errors Of The Ultrasonic Level And Increasing The Accuracy Of Measuring The Level Of Liquid Materials In Non-Stationary Media, Azamat Alijonovich Yusupov

Chemical Technology, Control and Management

This article is devoted to the analysis of the total error of an ultrasonic level meter designed to measure the level of liquid materials in order to improve the accuracy of the measuring system in tanks. The components of the total error of the process of measuring transformation of the liquid level are determined and the analysis of the main characteristics is carried out, to reduce the random error of the measurement system, the task of ensuring the accuracy of measurement and control of the level using an ultrasonic level gauge is presented, by averaging the measurement results when calculating …

Formalization Of The Procedure For Choosing The Optimality Criterion And Formulation The Problem Of Ammonium Nitrate Production Control, Husan Zakirovich Igamberdiev, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

The article discusses the questions of formalization of the procedure for choosing an optimality criterion and setting the problem of controlling the production of ammonium nitrate. The analysis of the technical and economic features of the considered production is carried out. As a criterion for the efficient operation of ammonium nitrate production, such a technological indicator as specific technological costs for the main stages, determined by the interval of quasi-stationarity of the object, is used, i.e. the time of its stable work. To solve the control problem, it is proposed to use the decomposition of the control problem into a …

Algebraic, Computational, And Data-Driven Methods For Control-Theoretic Analysis And Learning Of Ensemble Systems, Wei Miao

McKelvey School of Engineering Graduate Student Theses & Dissertations

In this thesis, we study a class of problems involving a population of dynamical systems under a common control signal, namely, ensemble systems, through both control-theoretic and data-driven perspectives. These problems are stemmed from the growing need to understand and manipulate large collections of dynamical systems in emerging scientific areas such as quantum control, neuroscience, and magnetic resonance imaging. We examine fundamental control-theoretic properties such as ensemble controllability of ensemble systems and ensemble reachability of ensemble states, and propose ensemble control design approaches to devise control signals that steer ensemble systems to desired profiles. We show that these control-theoretic properties …

Elucidating And Leveraging Dynamics-Function Relationships In Neural Circuits Through Modeling And Optimal Control, Sruti Mallik

McKelvey School of Engineering Graduate Student Theses & Dissertations

A fundamental research question in neuroscience pertains to understanding how neural networks through their activity encode and decode information. In this research, we build on methods from theoretical domains such as control theory, dynamical systems analysis and reinforcement learning to investigate such questions. Our objective is two-fold: first, to use methods from engineering to identify specific objectives that neural circuits might be optimizing through their spatiotemporal activity patterns, and second, to draw motivation from neuroscience to formulate new engineering principles such as synthesis of dynamical networks for decentralized control applications. We specifically take a top-down, optimization driven approach in our …

Assessment Of The Impacts Of Climate Variability On Hydropower Generation: A Case Study Of The New Pangani Falls, Tanzania, Dativa Byarufu

Tanzania Journal of Engineering and Technology (TJET)

Climate change poses potential impacts on hydropower generation either positively by increasing or negatively by decreasing river flow. This study assessed the impacts of climate variability on hydropower with a focus on the New Pangani Falls in Tanzania. Rainfall and temperature time series data from 1980-2014 were analyzed in relation to river discharge and associated impacts to hydropower generation. The Man-Kendall test was used to detect trend in both annual and seasonal time series. The results showed a negative trend in annual rainfall with Z= -2.41 at α = 0.05 and the slope Q = -0.964. Seasonal trend analysis showed …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Review Of Data Mining Techniques For Detecting Churners In The Telecommunication Industry, Mahmoud Ewieda, Mohamed Ismail Roushdy, Essam Shaaban

Future Computing and Informatics Journal

The telecommunication sector has been developed rapidly and with large amounts of data obtained as a result of increasing in the number of subscribers, modern techniques, data-based applications, and services. As well as better awareness of customer requirements and excellent quality that meets their satisfaction. This satisfaction raises rivalry between firms to maintain the quality of their services and upgrade them. These data can be helpfully extracted for analysis and used for predicting churners. Researchers around the world have conducted important research to understand the uses of Data mining (DM) that can be used to predict customers' churn. This …

Electricity Market Operations With Massive Renewable Integration: New Designs, Shengfei Yin

Electrical Engineering Theses and Dissertations

Electricity market has been transitioning from a conventional and deterministic operation to a stochastic operation under the increasing penetration of renewable energy. Industry-level solutions toward the future electricity market operation ask for both accuracy and efficiency while maintaining model interpretability. Hence, reliable stochastic optimization techniques come to the first place for such a complex and dynamic problem.

This work starts at proposing a solution strategy for the uncertainty-based power system planning problem, which acts as a preliminary and instructs the electricity market operation. Considering 100% renewable penetration in the future, it analyzes the cost-effectiveness of renewable energy from a long-term …

Efficiently Estimating Survival Signature And Two-Terminal Reliability Of Heterogeneous Networks Through Multi-Objective Optimization, Daniel Bruno Lopes Da Silva

Graduate Theses and Dissertations

The two-terminal reliability problem is a classical reliability problem with applications in wired and wireless communication networks, electronic circuit design, computer networks, and electrical power distribution, among other systems. However, the two-terminal reliability problem is among the hardest combinatorial problems and is intractable for large, complex networks. Several exact methods to solve the two-terminal reliability problem have been proposed since the 1960s, but they have exponential time complexity in general. Hence, practical studies involving large network-type systems resort to approximation methods to estimate the system's reliability. One attractive approach for quantifying the reliability of complex systems is to use signatures, …

Enterprise Engineering And Intellectual Technologies For Lifecycle Management Of Industrial Production, Nodirbek Rustambekovich Yusupbekov, Valery Borisovich Tarasov, Shukhrat Manapovich Gulyamov, Fahritdin Raupovich Abdurasulov

Chemical Technology, Control and Management

The fundamental scientific problem of the development of the mathematical foundations of engineering for industrial enterprises and the development of mathematical methods of production management, as well as the creation of intelligent systems for coordinated management of the life cycles of products and production in the network of enterprises are discussed. The issues in demand in the development of a vast interdisciplinary field of enterprise engineering and the development of modern network enterprises and intelligent production using mathematical modeling methods are discussed.

A Study On Dynamic Characteristics Of A New Remote Transformer Current Converter Without Compensating Capacitor, Sulton Faizullaevich Amirov, Nargisa Kamilovna Babanazarova, Nurullo Rahmatullaevich Yuldashev

Chemical Technology, Control and Management

In this research paper, analytical equations of the transient characteristics of a new remote transformer current converter without a compensating capacitor have been obtained when a stepwise, linearly increasing, sinusoidal and sinusoidal with a damped amplitude of effects was applied to their input. It has been shown that the developed current converter can be represented in the structural schemes of monitoring and control systems in the form of a series-connected real differentiating link without statism and inertial (aperiodic) link of the first order, and in the case of neglecting active losses in the magnetic circuit and when the converter is …

Models And Fuzzy Microclimate Control System In The Storage Of Archival Documents, Avaz Marakhimov Scd, Prof, Abdushukur Abdullaev

Chemical Technology, Control and Management

In this article, the main object of research is the creation of appropriate microclimatic conditions to ensure reliable and high-quality storage of archival documents, as well as automatic control of the optimal values of the main parameters of the external and internal environment that directly affect the quality of storage. To control the microclimate, three categories of models for automatic control of these parameters are considered separately in the archives: the “white box”, “black box” and “gray box " models. The results of the analysis of the advantages and disadvantages of the considered models are presented. The generalized structure …

Identification Of Key Persons In The Information Security Incident Management Process And Distribution Of Roles Between Them, Fayzullajon Bakhtiyorovich Botirov, Sharifjon Rakhimovich Gafurov, Azam Anvorovich Gafurov

Chemical Technology, Control and Management

This research paper is devoted to the process of information security incident management and the distribution of the roles of key persons in this process. The skills required for members of the information security incident response team are considered, positions and responsibilities are given - typical positions that exist in each organization, testing and improvement procedures are given, the role of the information security incident response team members and employee positions is shown. The quality of the group leader is reflected; responsible for personnel management, scoping and reporting on the state of the organization at a higher level of the …

Results Of X-Ray Phase And Ir-Spectral Analysis Of Azosuperphosphates Obtained On The Basis Of Phosphorites Of Central Kizilkum, Elyor Atashev, Maksud Jabbievich Jumaniyazov, Sayfitdin Mukhitdinovich Tadjiev

Chemical Technology, Control and Management

This article is devoted to the use of ammonium sulfate in the production of nitrogen-phosphorus fertilizers, which are widely used in agriculture today. In the research work, the possibilities of obtaining azo superphosphate are described in detail by the use of intensive technology based on low-grade phospharites of the Central KyzylKum. X-ray and IR-spectroscopic analyzes of a new type of NP-complex fertilizers obtained using a solution of ammonium sulfate in sulfuric acid are described in detail. The X-ray analysis of the obtained sample on the X-ray diffraction pattern of the azo-superphosphate fertilizer revealed the appearance of peaks in the interplanar …

Problem Solving Methods For Synthesis Of Physical Principles Of Mechatronic Module Operations In Intelligent Robotic Systems, Nazarov Khayriddin Nuritdinovich

Chemical Technology, Control and Management

The scientific paper investigates the methods for solving problems of synthesis of physical principles of operation of mechatronic modules of intelligent robotic systems are considered.

In addition, it deals with the specifics of the process of synthesis of the physical principles of the operation of mechatronic modules using predicate models, list models and information matrices of physical and technical effects.

It shows the interpretation of the components of the model of the system for the synthesis of the physical principles of operation of mechatronic modules of intelligent robotic systems and automatic control and the features of the synthesis algorithm for …

Bibliometric Review Of Predictive Maintenance Using Vibration Analysis, Aashna Midha Ms., Ishita Maheshwari Ms., Kaushik Ojha Mr., Kritika Gupta Ms., Shripad V. Deshpande Mr.

Library Philosophy and Practice (e-journal)

Every day the world is depending more and more on machines in almost every aspect of life. With the increasing use of machines, there also needs to be an evolution in the maintenance of these machines. Predictive maintenance is a process used to monitor the equipment and machinery during its operation to detect any damages and/or deteriorations and enable the required maintenance plan in advance, resulting in reduced operational costs and full utilization of tools and parts. The fundamental goal of this bibliometric review paper is a comprehension of the extent and sources of the literature available for predictive maintenance …

Multilayer Perceptron With Auto Encoder Enabled Deep Learning Model For Recommender Systems, Subhashini Narayan

Future Computing and Informatics Journal

In this modern world of ever-increasing one-click purchases, movie bookings, music, health- care, fashion, the need for recommendations have increased the more. Google, Netflix, Spotify, Amazon and other tech giants use recommendations to customize and tailor their search engines to suit the user’s interests. Many of the existing systems are based on older algorithms which although have decent accuracies, require large training and testing datasets and with the emergence of deep learning, the accuracy of algorithms has further improved, and error rates have reduced due to the use of multiple layers. The need for large datasets has declined as well. …