Operations Research, Systems Engineering and Industrial Engineering Commons^™

Ambulatory Healthcare Utilization In The United States: A System Dynamics Approach, Rafael Diaz, Joshua G. Behr, Mandar Tulpule

VMASC Publications

Ambulatory health care needs within the United States are served by a wide range of hospitals, clinics, and private practices. The Emergency Department (ED) functions as an important point of supply for ambulatory healthcare services. Growth in our aging populations as well as changes stemming from broader healthcare reform are expected to continue trend in congestion and increasing demand for ED services. While congestion is, in part, a manifestation of unmatched demand, the state of the alignment between the demand for, and supply of, emergency department services affects quality of care and profitability. The central focus of this research is …

Irrigation Leak Detection: Using Flow Rate Sensors To Detect Breaks In An Irrigation System, Adam Openshaw, Kalvin Vu

Computer Engineering

This report details the exploration and invention of a mechanism that can detect breaks in an irrigation system. With the ultimate goal of conserving water, we have designed an inexpensive, self sustaining flow rate monitor that can be used to identify anomalies in an irrigation system and wirelessly communicate the status of the system to a base station. Our implementation can also determine the direction of the anomaly based on the nature of the anomaly itself. This means that multiple monitors can be used to pinpoint the location of a break within the system in addition to merely detecting its …

Uav Pirates And Silentrack Integration, Travis Dean, Hushnak Singh, Ashley Wager, Matthew (Matt) Woolridge

Electrical Engineering

The integration of the UAV pirating system with the SilenTrack video tracking system will allow the combined system to automatically identify and track a suspicious air vehicle visually as well as identify and decode the RF control signal. Once a threat has been identified, the system will execute an algorithm to associate each control channel with the corresponding flight control surface. Once the control channels have been decoded the user can use a hand held radio controller to maneuver the drone which is now under their command.

Coping With The Curse Of Dimensionality By Combining Linear Programming And Reinforcement Learning, Scott H. Burton

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Reinforcement learning techniques offer a very powerful method of finding solutions in unpredictable problem environments where human supervision is not possible. However, in many real world situations, the state space needed to represent the solutions becomes so large that using these methods becomes infeasible. Often the vast majority of these states are not valuable in finding the optimal solution. This work introduces a novel method of using linear programming to identify and represent the small area of the state space that is most likely to lead to a near-optimal solution, significantly reducing the memory requirements and time needed to arrive …

Nato Human View Architecture And Human Networks, Holly A. H. Handley, Nancy P. Houston

Engineering Management & Systems Engineering Faculty Publications

The NATO Human View is a system architectural viewpoint that focuses on the human as part of a system. Its purpose is to capture the human requirements and to inform on how the human impacts the system design. The viewpoint contains seven static models that include different aspects of the human element, such as roles, tasks, constraints, training and metrics. It also includes a Human Dynamics component to perform simulations of the human system under design. One of the static models, termed Human Networks, focuses on the human-to-human communication patterns that occur as a result of ad hoc or deliberate …

Task Analysis, Modeling, And Automatic Identification Of Elemental Tasks In Robot-Assisted Laparoscopic Surgery, Lavie Pinchas Golenberg

Wayne State University Dissertations

Robotic microsurgery provides many advantages for surgical operations, including tremor filtration, an increase in dexterity, and smaller incisions. There is a growing need for a task analyses on robotic laparoscopic operations to understand better the tasks involved in robotic microsurgery cases. A few research groups have conducted task observations to help systems automatically identify surgeon skill based on task execution. Their gesture analyses, however, lacked depth and their class libraries were composed of ambiguous groupings of gestures that did not share contextual similarities.

A Hierarchical Task Analysis was performed on a four-throw suturing task using a robotic microsurgical platform. Three …

E-Quality: Using Dimensional Index Values Towards Improving Classification Accuracy, Prashanth Devaram

Open Access Theses & Dissertations

E-quality is a process through which inspection of the process and quality of the part produced is done online resulting in the improvement of the process and reduction in the amount of time consumed for the overall process. Automated quality control involves using a methodology to classify the parts based on the dimensions of the features on a part. However, achieving 100% classification accuracy is not an easy task, especially in area of quality control where small differences in dimensions result in part fall into a different category. In this study, a novel approach for modifying the data before being …

Synthesis, Interdiction, And Protection Of Layered Networks, Kevin T. Kennedy

Theses and Dissertations

This research developed the foundation, theory, and framework for a set of analysis techniques to assist decision makers in analyzing questions regarding the synthesis, interdiction, and protection of infrastructure networks. This includes extension of traditional network interdiction to directly model nodal interdiction; new techniques to identify potential targets in social networks based on extensions of shortest path network interdiction; extension of traditional network interdiction to include layered network formulations; and develops models/techniques to design robust layered networks while considering trade-offs with cost. These approaches identify the maximum protection/disruption possible across layered networks with limited resources, find the most robust layered …

Learning Without Default: A Study Of One-Class Classification And The Low-Default Portfolio Problem, Kenneth Kennedy, Brian Mac Namee, Sarah Jane Delany

Conference papers

This paper asks at what level of class imbalance one-class classifiers outperform two-class classifiers in credit scoring problems in which class imbalance, referred to as the low-default portfolio problem, is a serious issue. The question is answered by comparing the performance of a variety of one-class and two-class classifiers on a selection of credit scoring datasets as the class imbalance is manipulated. We also include random oversampling as this is one of the most common approaches to addressing class imbalance. This study analyses the suitability and performance of recognised two-class classifiers and one-class classifiers. Based on our study we conclude …

Gathering Cows Using Virtual Fencing Methodologies, Dean M. Anderson, Marek Doniec, Carrick Detweiler, Iuliu Vesilescu, Daniela Rus, Barbara Nolen, Roy Libeau

School of Computing: Conference and Workshop Papers

Free-ranging livestock are classically controlled by herders. Holding, moving, or gathering free-ranging cattle requires flexible husbandry practices for efficient and effective lowstress animal management. Behavioral theory and practical experience indicates cattle can be taught to respond to auditory cues. Preliminary research has demonstrated that cows can be gathered autonomously using recorded audio cues associated with manual gathering. However, efficient gathering requires movement in the proper direction. Therefore, we believe using audio cues administered from directional virtual fencing (DVF™) equipment can facilitate proper animal orientation and facilitate the gathering of animals with minimal human intervention. Results from applying directional audio cues …

Order And Disorder, Entropy In Math, Science, Nature And The Arts, Sol Neeman Ph.D., Arie Maharshak

Engineering Studies Faculty Publications and Creative Works

Often, science and engineering students have difficult time in viewing certain concepts in their holistic form. An example for such a concept is the concept of Entropy. Although it originated from the field of thermodynamics, the relation between order and disorder is a profound one and manifests itself in various fields, sometimes unrelated, such as math and science, nature and the arts. In the discipline of physics, the amount of disorder in a system has been quantified by the concept of Entropy. In the area of information theory it provides a quantitative measure of the amount of compression that may …

Support For A Delivery Train Based Material Handling Mechanism, Sai P. Boyedapu

Electrical & Computer Engineering Theses & Dissertations

Modeling a delivery train system is more challenging than traditional forklift systems as the delivery train model consists of a tugger, cart and a controller that combine to deliver materials within a manufacturing plant. Also, the decision logic for selection of carts and tuggers, joining of loads to particular delivery trains is more complicated than forklift systems. Simulation software such as Arena, Automod and Flexsim do not provide direct support for modeling delivery train systems.

In this thesis, an object-oriented, platform and language independent model of a delivery train was designed. The model was then implemented as an extension to …

A Conceptual Framework For Analysis Of System Safety Interoperability Of United States Navy's Combat Systems, Showkat Shanaz Alborzi

Engineering Management & Systems Engineering Theses & Dissertations

Today's political and military reality requires the optimal use of our legacy systems. The objective is to maximize the effectiveness of our operations by efficient allocation, placement and the use of our forces and war-fighting systems. The synergism drawn from the capabilities of the legacy complex systems enables today's war-fighting needs to be met without substantial increase in cost or resources. This synergism can be realized by the effective integration and interoperation of legacy systems into a larger, more complex system of systems.

However, the independently developed legacy systems in this new tactical environment often have different data types, languages, …

A Systems Methodology For Measuring Operational Organization Effectiveness: A Study Of The Original Equipment Computer Manufacturing Industry, 1948 To 2001, Teddy Steven Cotter

Engineering Management & Systems Engineering Theses & Dissertations

Optimizing operational organizational effectiveness is the central, although often unstated, goal of engineering management and systems engineering research and applications. Two fundamental problems remain to be addressed in pursuit of this goal. First, despite over fifty years of research in various disciplines, there is still no universally accepted definition of organizational effectiveness. Second, no methodology exists to identify the domains, dimensions, and determinants of operational organizational effectiveness and dynamically model operational organizational effectiveness within a given population.

This research synthesizes a systems engineering methodology for identifying the domains, dimensions, and determinants of and dynamically modeling operational organizational effectiveness for an …

Software Development Project Risk Management: A Literature Review, Kevin Macg. Adams, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

The rapid and unprecedented growth in software has brought with it some of the most spectacular and costly project failures in modern history. How risk management is presented in the scholarly journals may give insight into the risk management methods and techniques in use on software development projects. This paper provides a glimpse into the risk management methods, methodologies and techniques available to those who are responsible for software development projects by conducting a non-experimental content analysis. The findings reveal that risk management has not received sufficient attention and does not appear to be widely accepted within the software engineering …

Development Of A System Of Systems Engineering Method, Ji Hyon Mun, Morgan Henrie, Yaneth Correa, Charles Keating, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

Systems engineers have been facing challenges with the design and analysis of multiple complex systems. System of Systems Engineering has emerged to assist in this challenge with the systemic analysis, design, and transformation of complex metasystems. This paper outlines a proposed method to overcome these challenges, which is grounded in System of Systems Engineering principles and methodology. An overview of System of Systems Engineering will be provided for understanding of its significance and the attempt to complement Systems Engineering efforts in dealing with the aforementioned challenges. Finally, discussion on the proposed method, with respect to complex system analysis, is provided.

Management Of Extremes In The Configuration Of Interoffice Telephone Switch & Priority Systems, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

This paper describes how to enable diverse enterprise customers for voice-data switch to achieve in configuration a balance among users, features, and perceived reliability subject to extremes of traffic. The analysis entailed the simulation of the voice-data switch with embedded priority system, generation of latency times for various configurations and transaction traffic rates, and the development of a framework and theoretical propositions for configuration of super-saturated systems. It was shown that the concept of tolerance levels defined in the risk of extreme events can be applied for embedded priority systems and was the basis for the application of the zone-configuration …

Optimal Location Of Intermodal Freight Hubs, Illia Racunica, Laura Wynter

Research Collection School Of Computing and Information Systems

We present an optimization model that has been developed to address the problem of increasing the share of rail in intermodal transport through the use of hub-and-spoke type networks for freight rail. The model defined is a generalization of the hub location problem in that it allows for non-linear and concave cost functions on different segments. A linearization procedure along with two efficient variable-reduction heuristics was developed for its resolution, making use of recent results on polyhedral properties of this class of problems. Computational experience and a qualitative analysis from a case study on the Alpine freight network is provided.

The Frequency Distribution Of Quantization Error In Digitizers For Coherent Sampling, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

In this paper the frequency distribution of quantization error in coherent sampling of digitizers will be investigated. As the distribution of the quantization error affects the values of THD and SNR, it is relevant for a correct interpretation of THD and SNR of sine waves in coherent sampling. The distribution of the quantization error will be analyzed as a function of N, total number of samples and M, number of cycles in the sample set and it will be proved that for certain cases, the quantization error falls on odd harmonics only of the frequency of the sampled sine wave.

Object-Oriented Architecture For Concurrent Processes In A Port Simulation, Reejo Mathew

Electrical & Computer Engineering Theses & Dissertations

An architectural model to represent the resources and infrastructure within a cargo terminal, as well as to support the concurrent but opposite flow of cargo within the terminal, is presented in this thesis. The model supports the configuration of an individual cargo terminal according to its characteristics, as well as the processing involved in the simultaneous flow of cargo in opposite directions through the terminal. This is useful in the analysis of the flow of military cargo and aids the decision-making process to increase the efficiency and throughput of any military operation. This model has been developed with the aim …

The Shipboard Office' : The Role Of It And Multi-Media Systems In Managing Engineering Operations And Maintenance Onboard Ship, Okechukwu Ebere Sylvanus Obara

World Maritime University Dissertations

This dissertation is an investigation of the roles of information technology and multimedia systems in the management of engineering operations and maintenance onboard ships. It considers the implications and constraints of adopting these technology tools on the economies of ship owners or managements companies, Maritime Administrations, and the Maritime Education and Training Institutions, especially in the developing countries. The study reviews the various shipboard maintenance policies and management techniques currently being practised in the traditional shipboard office with a view of understanding its constraints and the needs of adopting the various technological tools and systems. It also examines critically, the …

Attitudes And Perceptions Regarding Internet-Based Electronic Data Interchange In A Public Organization In Saudi Arabia, Abdulrahman S. Al-Zumaia

Dissertations and Theses @ UNI

This study examined the attitudes and perceptions of staff members and administrators in the General Directorate for Private Institutes & Centers (GDPI&C), Training institutes, and Centers in Saudi Arabia toward Internet-based Electronic Data Interchange (I-EDI) in a public organization. A survey was conducted of a group of GDPI&C members and randomly selected Institutes and Centers. The 339 respondents participated anonymously by providing demographic information and completing the attitudes and perceptions section of I-EDI questionnaire. The survey response rate was 82.6%.

An attitude survey was distributed to staff members, administrators, and faculty members in the Saudi Arabian GDPI&C, Training Institutes, and …

Hopfield Model For Shortest Path Computation And Routing In Atm Network, Chee Weng Lee

Student Works (2000-2009)

This research focuses on the application of Hopfield neural network and Boltmann machine in solving the shortest path routing problem in the ATM network environment. Hopfield neural network and Boltzmann machine are two types of neural network which are commonly used for solving optimization problem such as the shortest path routing problem. The objectives of this research are to construct a Hopfield neural network and a Boltzmann machine for solving the shortest path routing problem in the ATM network. Both of these two types of neural network are built based on a chosen example of an A TM network. The …

The Determination Of Failure Occurring In The Stator Coil Winding Due To The Over-Voltage Using Matlab Software, Ali Reza Alavizadeh

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science & Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science in Vocational Education & Technology by Ali Reza Alavizadeh on December 1, 2000.

Swarm Engineering, S. Kazadi '90

Doctoral Dissertations

Swarm engineering is the natural evolution of the use of swarm-based techniques in the accomplishment of high level tasks using a number of simple robots. In this approach, one seeks not to generate a class of behaviors designed to accomplish a given global goal, as is the approach typically found in mainstream robotics. Once the class of behaviors has been understood and decided upon, specific behaviors designed to accomplish this goal may be generated that will complete the desired task without any concern about whether or not the final goal will actually be completed. As long as the generated behaviors …

Process Flow Optimization Studies Through Discrete Event Simulation, Milind Chokshi

Electrical & Computer Engineering Theses & Dissertations

Computer-aided simulation has begun to emerge as a powerful tool for numerical analysis of the behavior and anticipated performance of industrial systems and their optimization. Applications include materials handling, storage and controls systems, prediction of manufacturing efficiencies, and production optimization. Simulations are used to test baseline models and subsequently analyze new production concepts, operating strategies, and planned procedures prior to costly implementation.

The study of process flows in a manufacturing environment is difficult due to its inherent stochastic nature. Breakdown of the sub-systems and failures of machines is a random process and needs to be solved based on concepts of …

Application Of Wavelets And Principal Component Analysis In Image Query And Mammography, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

Breast cancer is currently one of the major causes of death for women in the U.S. Mammography is currently the most effective method for detection of breast cancer and early detection has proven to be an efficient tool to reduce the number of deaths. Mammography is the most demanding of all clinical imaging applications as it requires high contrast, high signal to noise ratio and resolution with minimal x-radiation. According to studies [36], 10% to 30% of women having breast cancer and undergoing mammography, have negative mammograms, i.e. are misdiagnosed. Furthermore, only 20%-40% of the women who undergo biopsy, have …

Combining Wavelets And Hotelling Transforms In Image Query, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

In the "content based" image query, also referred to as "query by example," "similarity retrieval" or "sketch retrieval," the query image is provided by the user either as a sketch of the object, as the output of a scanner or a video camera. Some of the difficulties associated with content based image query are described in [1], e.g. significant difference between the "query image" and the "target image," artifacts and poor resolution of the query image make a straightforward comparison of images using L1 and l2 metrics not effective.

In [2] a new strategy is suggested based on wavelet decomposition …

A Multithreaded Scheduler For A High-Speed Simulator, Gene Saghi, Kirk Reinholtz, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

The Cassini spacecraft is on its journey to Saturn to perform a close-up study of the Saturnian system; its rings, moons, magneto-sphere, and the planet itself. Sequences of commands will be sent to the spacecraft by ground personnel to control every aspect of the mission. To validate and verify these command sequences, a bit-level, high-speed simulator (HSS) has been developed. To maximize performance, the HSS is implemented with multiple threads and runs on a multiprocessor system. A key component of the HSS is the scheduler, which controls the execution of the simulator. The general framework of the scheduler can be …

Modeling And Comparison Of Wormhole Routed Mesh And Torus Networks, Ronald I. Greenberg, Lee Guan

Computer Science: Faculty Publications and Other Works

2D-mesh and torus networks have often been proposed as the interconnection pattern for parallel computers. In addition, wormhole routing has increasingly been advocated as a method of reducing latency. Most analysis of wormhole routed networks, however, has focused on the torus and the broader class of k-ary n-cubes to which it belongs. This paper presents a performance model for the wormhole routed mesh, and it compares the performance of the mesh and torus based on theoretical and empirical analyses.