Open Access. Powered by Scholars. Published by Universities.®

Operations Research, Systems Engineering and Industrial Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Computer Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1651 - 1680 of 4209

Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering

One Turbulent Modeling Method Based On Environmental Forecast Data, Dawei Fan, Jiahui Tong Dec 2020

One Turbulent Modeling Method Based On Environmental Forecast Data, Dawei Fan, Jiahui Tong

Journal of System Simulation

Abstract: Based on the existing natural environment model of aircraft simulation test,the method of conversion and processing for environmental prediction data is studied.Based on the random wave theory,the mathematical model of turbulent wind is established,and the simulation modeling method is studied.Based on Davenport spectrum,a turbulent wind model based on environmental prediction data is established and is introduced into the mathematical simulation experiment of a type of aircraft to obtain the influence of wind turbulent on the flight state of the aircraft.The experimental results show that the gust turbulence has a greater impact on the aircraft's angle of …

Go to article

Collaborative Optimization Of Production And Energy Consumption In Flexible Workshop, Ding Yu, Wang Yan, Zhicheng Ji Dec 2020

Collaborative Optimization Of Production And Energy Consumption In Flexible Workshop, Ding Yu, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: Considering the problem of the multi-objective constrained flexible job-shop,the NSGA-Ⅱalgorithm based on hybrid mutation operator is proposed.In view of NSGA-II algorithm being prone to premature convergence,poisson average and gaussian operators are introduced to improve the global and local optimization ability of the algorithm.The optimal scheme is selected from the set of pareto solutions by adopting the strategy of FAHP-IEVM,which is the combination of subjective and objective evaluation method. The modified algorithm is tested and compared by a series of ZDT test functions.The results show that the convergence and diversity of the revised algorithm are improved obviously.The effectiveness of …

Go to article

Fault Diagnosis For Bearings Of Unbalanced Data Based On Feature Generation, Minglu Fan, Wang Yan, Zhicheng Ji Dec 2020

Fault Diagnosis For Bearings Of Unbalanced Data Based On Feature Generation, Minglu Fan, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: Focus on the sample imbalance and insufficiency caused by the difficulty to obtain a sufficient number of fault samples in actual production.A model for rolling bearings by combining Convolutional Neural Networks and Synthetic Oversampling is presented.The frequency domain signals is used as the input of the model,and the features are extracted by the Convolutional Neural Network.The new features are generated by Synthetic Oversampling and the data equalization is realized.The model completes the classification by putting all of the features into the Support Vector Machine,and the fault diagnosis of the rolling bearings is carried out.The comparison experiments results …

Go to article

Application Of Simulation Technology In Football Overall Attack Training, Xu Nuo, Shuanglong Liu, Fugao Jiang Dec 2020

Application Of Simulation Technology In Football Overall Attack Training, Xu Nuo, Shuanglong Liu, Fugao Jiang

Journal of System Simulation

Abstract: Simulation technology has a broad prospect in the field of football application.At present,football attack training is mainly based on audio-visual,experience and on-the-spot practice,but it lacks professional scene representation and systematic theoretical support. Visual C++ development platform and simulation programming method are used to virtualize the football training and reproduce the overall attack drill of football under different training scenes.The results show that the simulation technology can achieve more training situations. It can be used as an auxiliary tool for football overall attack training,enrich the training means,help players accurately understand the tactical system,and promote the scientific development of football training.

Go to article

Stereo Camera Calibration Based On Multiple Fitness Full-Parameter Autonomous Mutation Particle Swarm, Guiyang Zhang, Muyao Xue, Zijian Zhu, Huo Ju Dec 2020

Stereo Camera Calibration Based On Multiple Fitness Full-Parameter Autonomous Mutation Particle Swarm, Guiyang Zhang, Muyao Xue, Zijian Zhu, Huo Ju

Journal of System Simulation

Abstract: The acquisition of target parameters based on visual measurement provides reliable data support for performance analysis and evaluation of simulation system.The precision of measurement results is determined by the accuracy of camera calibration.A calibration method based on full parameter autonomous mutation particle swarm optimization is proposed.Traditional calibration method is utilized to obtain the initial internal parameters.The fast and global calibration algorithm based on particle swarm optimization is achieved by inertial coefficient contraction adjustment,global factor learning adjustment strategy based on particle distance,multi-adaptation function and the independent variation law.The experimental results show that the proposed method can improve the …

Go to article

A Simulation Credibility Assessment Method Based On Improved Fuzzy Comprehensive Evaluation, Peizhi Ran, Li Wei, Bao Ran, Ma Ping Dec 2020

A Simulation Credibility Assessment Method Based On Improved Fuzzy Comprehensive Evaluation, Peizhi Ran, Li Wei, Bao Ran, Ma Ping

Journal of System Simulation

Abstract: Aiming at the problems of inaccurate evaluation results caused by experts in the process of simulation credibility evaluation based on traditional fuzzy comprehensive evaluation according to personal preferences or expectations,and unreasonable selection of fuzzy synthetic calculations,a simulation credibility evaluation method based on improved fuzzy comprehensive evaluation is proposed.For the tree-like assessment index system,the fuzzy comprehensive evaluation matrix is used to determine the weight of each index in the assessment index system based on the minimum membership weighted average deviation;in the fuzzy synthesis operation,the membership evaluation weighted average deviation is used to obtain the comprehensive evaluation vector,and then the …

Go to article

Prediction Of Epidemic Transmission And Evaluation Of Prevention And Control Measures Based On Artificial Society, Bin Chen, Yang Mei, Chuan Ai, Ma Liang, Zhengqiu Zhu, Hailiang Chen, Mengna Zhu, Xu Wei Dec 2020

Prediction Of Epidemic Transmission And Evaluation Of Prevention And Control Measures Based On Artificial Society, Bin Chen, Yang Mei, Chuan Ai, Ma Liang, Zhengqiu Zhu, Hailiang Chen, Mengna Zhu, Xu Wei

Journal of System Simulation

Abstract: The COVID-19 has been controlled under the strict measures,but how to normalize it deserves in-depth study.The COVID-19 transmission model and the human contact network are established separately based on SEIR model and the artificial social scenario.With the support of the multi-agent computational experiment method,a large sample calculation experiment was performed on the Tianhe supercomputer to simulate the epidemic transmission in typical areas such as communities,schools,and workplaces in artificial cities,and to predict and evaluate the risk of epidemic spread after resumption of work and school.The results show that epidemic prevention and control must be prepared for a …

Go to article

Demystifying Artificial Intelligence Based Digital Twins In Manufacturing- A Bibliometric Analysis Of Trends And Techniques, Satish Kumar, Shruti Patil, Arunkumar Bongale, Ketan Kotecha, Anup Kumar M. Bongale, Pooja Kamat Nov 2020

Demystifying Artificial Intelligence Based Digital Twins In Manufacturing- A Bibliometric Analysis Of Trends And Techniques, Satish Kumar, Shruti Patil, Arunkumar Bongale, Ketan Kotecha, Anup Kumar M. Bongale, Pooja Kamat

Library Philosophy and Practice (e-journal)

Nowadays, data is considered as a new life force for operations of physical systems in various domains such as manufacturing, healthcare, transportations, etc. However, the hugely generated data, which mirrors the working essence of the product life cycle, is still underutilised. Digital Twin (DT), a collective representation of active and passive captured data, is a virtual counterpart of the physical resources that could help prevent effective preventive maintenance in any applied domain. Currently, lots of research is going on about the applicability of digital twin in smart IOT based manufacturing industry 4.0 environment. Still, it lacks a formal study, which …

Go to article

Under Impact Of Non-Motor Vehicle Violation An Analysis On Vehicle Operation Efficiency, Sun Di, Zhou Jin, Sijia Liu, Xiaoming Zhang, Xueying Gao Nov 2020

Under Impact Of Non-Motor Vehicle Violation An Analysis On Vehicle Operation Efficiency, Sun Di, Zhou Jin, Sijia Liu, Xiaoming Zhang, Xueying Gao

Journal of System Simulation

Abstract: In order to study the impact of non-motor vehicle violations on motor vehicle traffic efficiency at signalized intersections, the non-motor vehicle traffic behaviors are analyzed. An actual intersection is selected as study object, the main violation behaviors of on selected intersection are analyzed by using the linear regression model. For traffic light violation behavior of non-motor vehicles, the violation rate is modeled by using logistic model, and the results are analyzed. At the signal controlled intersection, non-motor vehicle violations affect the normal motor vehicles, and time is delayed. The delay time of motor vehicle under non-motor vehicle …

Go to article

Time-Varying Parameter System Modeling Method Based On Zonotope-Ellipsoid Double Filtering, Ziyun Wang, Peiyu Wang, Yacong Zhan Nov 2020

Time-Varying Parameter System Modeling Method Based On Zonotope-Ellipsoid Double Filtering, Ziyun Wang, Peiyu Wang, Yacong Zhan

Journal of System Simulation

Abstract: The traditional system modeling method using zonotopes as the feasible parameter sets islikely to increase the computational complexity of the algorithm due to the increasing dimensions of the zonotope shape matrix. This paper proposes a time-varying parameter modeling systems method based on zonotope-ellipsoid double filtering technique. Considering the time-varying parameters, a zonotope with the minimum volume is obtained during the iterations of the intersection with the constraint strip. After transforming the shape matrix of the zonotope, the dimensionality reduction is performed, instead of directly finding the row sum of the extended shape matrix, to reduce the algorithm conservativeness originated …

Go to article

Research On Configurable Simulation Integration Technology For Equipment Software, Yuanyuan Wang, Yuxin Duan, Guangzhao Song Nov 2020

Research On Configurable Simulation Integration Technology For Equipment Software, Yuanyuan Wang, Yuxin Duan, Guangzhao Song

Journal of System Simulation

Abstract: The problems of the traditional distributed digital simulation system are analyzed. The method of constructing the digital simulation system based on the equipment software is studied. The configurable simulation integration middleware is designed. The overall structure of the configurable middleware is designed and the design ideas of each module are briefly summarized. An example of a digital simulation system with networked transformation of equipment shows that the middleware can be effectively and flexibly configured and can provide support for constructing digital simulation system with software, which can be promoted and used in other simulation systems.

Go to article

Research On Multi-Objective Optimization Method Based On Model, Jianjun Liu, Guangya Si, Yanzheng Wang, Dachuan He Nov 2020

Research On Multi-Objective Optimization Method Based On Model, Jianjun Liu, Guangya Si, Yanzheng Wang, Dachuan He

Journal of System Simulation

Abstract: There is a model-based algorithm for the optimization of multiple objective functions by means of black-box evaluation is proposed. The algorithm iteratively generates candidate solutions from a mixture distribution over the solution space and updates the mixture distribution based on the sampled solutions’ domination count, such that the future search is biased towards the set of Pareto optimal solutions. The proposed algorithm seeks to find a mixture distribution on the solution space so that each component of the mixture distribution is a degenerate distribution centered at a Pareto optimal solution and each estimated Pareto optimal solution is uniformly spread …

Go to article

Research And Application Of A Lightweight Real-Time Human Posture Detection Model, Hongkun Zhu, Jiawei Yin, Wenyu Feng, Hua Liang, Minrui Fei, Kun Zhang Nov 2020

Research And Application Of A Lightweight Real-Time Human Posture Detection Model, Hongkun Zhu, Jiawei Yin, Wenyu Feng, Hua Liang, Minrui Fei, Kun Zhang

Journal of System Simulation

Abstract: The traditional OpenPose model has good accuracy but slow speed in human posture detection. In order to accelerate the detection speed and reduce the model on condition of the detection precision, based on the traditional OpenPose model, the residual network with second-order term fusion is used to extract the low-level features, the weights of the trained model are pruned by the L1 norm weight, and an improved OpenPose model is proposed. Experiments show that when the detection accuracy is approximately equal to original model, the model size reduces to about 8%, the parameters reduces by nearly 83%, and the …

Go to article

Construction And Test Method Of A Semi-Physical Simulation System For Laser Driving Guidance Weapon, Zhang Xiang, Mengyan Liu, Zhang Peng, Kewei Zhu, Xiaodong Yan Nov 2020

Construction And Test Method Of A Semi-Physical Simulation System For Laser Driving Guidance Weapon, Zhang Xiang, Mengyan Liu, Zhang Peng, Kewei Zhu, Xiaodong Yan

Journal of System Simulation

Abstract: To achieve the previous semi-physical simulation of the laser beam-guided weapon, the two-dimensional translation system must be used. But the technical index of the two-dimensional translation system is not high enough to meet the requirements of the relative motion simulation speed and acceleration of the projectile. To solve the problem, a new method and test method for the semi-physical simulation system of laser driving guidance weapon is proposed. The “two-axis turret + load bracket” simulation system construction method is adopted to replace the linear motion of the two-dimensional translation system by the rotational angular motion of the …

Go to article

Two Gd Atoms Adsorbed On Zigzag Graphene Nanoribbon:A First-Principles Study, Weifeng Xie, Zuo Xu Nov 2020

Two Gd Atoms Adsorbed On Zigzag Graphene Nanoribbon:A First-Principles Study, Weifeng Xie, Zuo Xu

Journal of System Simulation

Abstract: A giant Rashba-type spin splitting is highly critical for the application of spintronics, but one-dimensional magnetic systems are rarely involved. In order to explore the characteristics and strength of Rashba effect in one-dimensional magnetic systems, two Gd atoms adsorbed on Zigzag graphene nanoribbon system is proposed. The characteristics and strength of the Rashba effect in different magnetization directions and the magnetic anisotropy of the system are analyzed through the first-principles calculations. The results show that the antiferromagnetic ground state system has strong Rashba strength and out-of-plane magnetic anisotropy. In addition, the Rashba effect in magnetic system needs to …

Go to article

Generalized Zero-Inflated Binomial Distribution Model Aimed At Air Quality Data Analysis, Benyue Su, Pengpeng Xu, Sheng Min Nov 2020

Generalized Zero-Inflated Binomial Distribution Model Aimed At Air Quality Data Analysis, Benyue Su, Pengpeng Xu, Sheng Min

Journal of System Simulation

Abstract: For the problem of the quality monitoring and counting of excessive gas emissions in chemical industry parks, a generalized zero-inflated binomial distribution model is constructed. Statistics show that the times of number of excessive gas emissions has a typical zero-inflated feature. The traditional zero-inflated Poisson model and negative binomial regression model and so on will underestimate the probability of zero inflation. A generalized zero-inflated binomial distribution model is constructed by extending the traditional binomial regression model to a more general form. This model satisfies the characteristic that the expectation is less than the variance, and better solves the problems …

Go to article

Hyper-Heuristic De Algorithm For Solving Zero-Wait Fermentation Process Schedulinge, Shen Peng, Wang Yan, Zhicheng Ji, Jianhua Zhang Nov 2020

Hyper-Heuristic De Algorithm For Solving Zero-Wait Fermentation Process Schedulinge, Shen Peng, Wang Yan, Zhicheng Ji, Jianhua Zhang

Journal of System Simulation

Abstract: A class of zero-wait fermentation process scheduling issues with batch process characteristics are researched. In order to solve the problem of easy deterioration in the process, a super heuristic difference algorithm is proposed, and the maximum makespan is minimized as the optimization goal. The algorithm is divided into two layers. The upper layer is an improved adaptive differential evolution algorithm to select and sort the heuristic operations in lower layer. The lower layer is combined and sorted into a new algorithm to operate on the problem domain, adding simulated annealing algorithm to avoid falling into local optimization. The method …

Go to article

Modeling And Relevance Analysis Of Urban Epidemic Transmission And Work Resumption Intensity, Gan Mi, Yunyi Tian, Wenchang Zhang, Xihan Zhao Nov 2020

Modeling And Relevance Analysis Of Urban Epidemic Transmission And Work Resumption Intensity, Gan Mi, Yunyi Tian, Wenchang Zhang, Xihan Zhao

Journal of System Simulation

Abstract: On the basis of multi-source big data, the model for analyzing the population migration changes and manpower gaps caused by the COVID-19 epidemic in 34 typical cities across the country is constructed , and the work resumption intensity of other cities is predicited by using the migration base constructed. The SEIR model is used to estimate the basic reproduction number in each city since the simulate results show that it can emulate the transmission trend of this epidemic accurately, and the retrospective matrix analysis of the work resumption intensity is combined with the manpower gap to summarize the anti-epidemic …

Go to article

Research On Dynamic Flexible Job Shop Scheduling Problem Based On Dynamic Interaction Layer, Zhang Xiang, Wang Yan, Zhicheng Ji Nov 2020

Research On Dynamic Flexible Job Shop Scheduling Problem Based On Dynamic Interaction Layer, Zhang Xiang, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: In order to quickly response to the unforeseen circumstances in flexible job shop, a dynamic flexible job shop scheduling model is constructed, which takes the overall production time and the completion time of emergency orders as the optimization objectives. For the model, a dynamic interaction layer (DIL) model, which has a better performance on DFJSP, is proposed to replace the scroll window. Particle swarm genetic hybrid algorithm (PSGA) is designed to combine the particle swarm optimization algorithm with the genetic algorithm to enhance the ability of local search. Aiming at the unexpected urgent orders in flexible job shop, …

Go to article

Echo Simulation And Verification Of High Resolution Range Profile, Xiaolin Li, Cheng Yu, Haifei Zang, Shuge Wang, Liu Li, Qingqing Yuan Nov 2020

Echo Simulation And Verification Of High Resolution Range Profile, Xiaolin Li, Cheng Yu, Haifei Zang, Shuge Wang, Liu Li, Qingqing Yuan

Journal of System Simulation

Abstract: In order to realize the echo simulation and verification of high-resolution range profile in laboratory environment, the multi-scattering point model and wideband LFM echo signal model are given, and the time-domain convolution and high-precision delay realization methods in echo simulation process are described. According to the different signal bandwidth forms of the tested equipments, a wideband echo simulator is used to realize the corresponding high-resolution range image echo. By comparing with the digital simulation results of the target characteristic modeling software, the fidelity of the high-resolution range echo simulation is verified. Simulation verification is carried out with an aircraft …

Go to article

Multi-Agent Simulation Model For Covid-19 Virus Prevention And Control, Lihu Pan, Shipeng Qin, Xiaowen Li, Feiping Lu, Fenyu Yang Nov 2020

Multi-Agent Simulation Model For Covid-19 Virus Prevention And Control, Lihu Pan, Shipeng Qin, Xiaowen Li, Feiping Lu, Fenyu Yang

Journal of System Simulation

Abstract: The prevention and control of the novel coronavirus (COVID-19) is the priority work to maintain the public health security of the world nowadays. The COVID-19 prevention and control model using multi-agent modeling and simulation technology is proposed. The model can simulate the different dynamic development trend of the epidemic under different prevention and control measures. Taking Taiyuan as an example, according to the researched COVID-19 transmission rules, the prevention and control simulation of COVID-19 has been achieved under the designing rule of the interactive infection process and status transition process between various resident agents. Multi-scenario simulation experiments are realized …

Go to article

Design And Implementation Of Cloth Virtual Simulation System For Group Performance, Xiaotian Sun, Boxiang Xiao, Zhengdong Liu Nov 2020

Design And Implementation Of Cloth Virtual Simulation System For Group Performance, Xiaotian Sun, Boxiang Xiao, Zhengdong Liu

Journal of System Simulation

Abstract: Clothing plays an important role in group performance activities and affects directly the overall performance effect. In order to achieve the goal of virtual design and virtual exercise of group performance costume, a virtual simulation system is designed and implemented. The human body model is established by CLO3D, and then individual clothing model is constructed. After the human body and clothing model are imported into Unity, the clothing material is adjusted and the texture map is added. The group model is generated by copying individual clothing models of human body and clothing in Unity. The interactive interface of virtual …

Go to article

Optimal Scheduling And Decision Making Method For Dynamic Flexible Job Shop, Wang Yan, Ding Yu Nov 2020

Optimal Scheduling And Decision Making Method For Dynamic Flexible Job Shop, Wang Yan, Ding Yu

Journal of System Simulation

Abstract: For multi-objective dynamic flexible job-shop scheduling, an improved multi-objective differential evolution algorithm is proposed. The adaptive cross-mutation operator is introduced into the differential evolution algorithm to improve its global search capability. The fast non-dominated sorting method based on immunological principles is introduced to improve the quality of the solution set in the selection and sorting. An improved TOPSIS-G1-EVM comprehensive decision-making method is proposed. The comprehensive weight of G1-EVM is calculated by Nash equilibrium theory. The comprehensive weight and TOPSIS evaluation system are combined to evaluate each dispatching scheme. The experimental results show that the optimal scheduling algorithm is superior …

Go to article

Fast 3d Medical Image Registration Based On Geometric Feature Invariants, Juping Gu, Tianyu Cheng, Jianping Wang, Hua Liang, Fengshen Zhao, Jiang Ling Nov 2020

Fast 3d Medical Image Registration Based On Geometric Feature Invariants, Juping Gu, Tianyu Cheng, Jianping Wang, Hua Liang, Fengshen Zhao, Jiang Ling

Journal of System Simulation

Abstract: Aiming at the of large amount of computational data and low registration efficiency in 3D cranial medical image registration, a fast registration method based on geometric feature space constraints is proposed. The algorithm extracts three-dimensional contour point clusters, and proposes a feature construction method based on the optimal fitting ring of point clusters. The feature rings and the centroids of each layer are used as feature quantities, and the fast registration is completed by using Iterative Closest Point (ICP) method. The experimental results show that the method has less computation amount, high satisfactory registration accuracy and much faster registration …

Go to article

Research On Improvement Of Parameters Calibration Method Of Microscopic Traffic Simulation Model, Chenjing Zhou, Yacong Gao, Rong Jian Nov 2020

Research On Improvement Of Parameters Calibration Method Of Microscopic Traffic Simulation Model, Chenjing Zhou, Yacong Gao, Rong Jian

Journal of System Simulation

Abstract: Model parameter calibration is the precondition of application of micro traffic simulation technology. In view of the lack of refined analysis in the model parameter calibration classification and calibration result determination, the corresponding improvement is proposed. The parameter calibration system divides global parameters and local parameters, provides a micro-simulation model parameter calibration method that combines engineering measurement and intelligent optimization. Based on the information entropy as the analysis index of the parameter calibration results, a method of parameter recursion after clustering is proposed. On the basis of the actual survey data of signalized intersections, A simulation experiments and …

Go to article

Design And Simulation On A Novel Sliding Mode Control For Linear Induction Motor, Kaiwei Han, Wang Yan, Zhicheng Ji Nov 2020

Design And Simulation On A Novel Sliding Mode Control For Linear Induction Motor, Kaiwei Han, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: The speed-tracking problem of linear induction motors under the influence of unmatched disturbances is studied. Based on the extended disturbance observers, the novel sliding mode controllers are designed to make the motor have effective response characteristics under unmatched disturbances. The extended disturbance observersis designed for the unmatched disturbances in the linear induction motor model with edge effects. The observations of the disturbance derivatives are filtered. The novel sliding mode controllers are designed based on the observations of the disturbances and their derivatives. The simulations results show that the designed controller has effective response characteristics and robustness. In addition, it …

Go to article

A Fast Latin Hyper Cube Experiment Design Method Based On Soduku Grouping, Tiantian Zhang, Li Ni, Guanghong Gong, Yuanjie Lu Nov 2020

A Fast Latin Hyper Cube Experiment Design Method Based On Soduku Grouping, Tiantian Zhang, Li Ni, Guanghong Gong, Yuanjie Lu

Journal of System Simulation

Abstract: In order to solve the long optimization time and parameter level combination explosion in the complex experiment design space of Latin Hypercube design, which is one of the most popular method in experiment design, a fast Soduku grouping-based method is proposed. The optimal seed design is expanded and transformed in the grouped spaces. Experiments are conducted to compare the Soduku grouping-based Latin Hypercube design method with other two commonly used Latin Hypercube design methods in the middle and high dimension experiment space. The results show that Soduku grouping method is more efficient in computation and has better space-filling performance.

Go to article

Container-Based Automatic Packaging Technology For Complex System Simulation Application, Wang Shuai, Zhu Feng, Yiping Yao, Wenjie Tang, Yuhao Xiao Nov 2020

Container-Based Automatic Packaging Technology For Complex System Simulation Application, Wang Shuai, Zhu Feng, Yiping Yao, Wenjie Tang, Yuhao Xiao

Journal of System Simulation

Abstract: Container-based technology provides a new solution for the rapid and flexible deployment of complex system simulation applications. Container supports service-based packaging of simulation applications, which greatly reduces the difficulty of deploying simulation applications. Current packaging technology mainly relies on manually writing Dockerfile, which results in low packaging efficiency and human errors. A container-based automatic packaging technology for complex system simulation application is proposed, and the reusable library component template is defined. Combined image template is generated by combining simulation application and library component templates. Dockerfile is generated by the combined template after syntax optimization and error detection. The experiments …

Go to article

Simulation Of Incentive Mechanism Simulation On Reverse Supply Chain Of Waste Products Based On Dual Drive, Dongshi Sun, Danlan Xie, Guan Feng, Ji Yuan Nov 2020

Simulation Of Incentive Mechanism Simulation On Reverse Supply Chain Of Waste Products Based On Dual Drive, Dongshi Sun, Danlan Xie, Guan Feng, Ji Yuan

Journal of System Simulation

Abstract: In view of the current situation of coordination failure caused by different benefits of different entities in the waste reverse supply chain, based on system dynamics, a three-party evolutionary game model of residents, waste disposal institutions and production enterprises is constructed. Vensim simulation software is used to establish the stock-flow chart with the strategy selection probability as the horizontal variable. In the two cases of exogenous variable in constant and a time-trend, the simulation is carried out separately, and the strategy evolution path of the three parties is obtained without external interference. Through sensitivity analysis, the exogenous variables …

Go to article

Effect Of New Titanium Alloy On Biomechanical Behavior Of Dental Implant, Jiwu Zhang, Qiguo Rong Nov 2020

Effect Of New Titanium Alloy On Biomechanical Behavior Of Dental Implant, Jiwu Zhang, Qiguo Rong

Journal of System Simulation

Abstract: Titanium alloy materials have excellent mechanical properties, chemical stability and biocompatibility, and have become the main raw materials for implants. However, the biomechanical compatibility of medical titanium alloys still needs to be improved in order to meet the long-term safety and functionality of patient's clinical treatment requirement. New medical titanium alloy materials with high strength and low modulus play an important role in reducing the loosening and shedding of implants caused by stress shielding. The effects of new medical titanium alloy materials and traditional medical titanium alloy materials on implant structure and stress distribution of jaw are compared and …

Go to article

First Prev Next Last