Open Access. Powered by Scholars. Published by Universities.®

Operations Research, Systems Engineering and Industrial Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 31 - 60 of 322

Full-Text Articles in Operations Research, Systems Engineering and Industrial Engineering

Ergonomic And Biomechanical Assessment Of Vertical Ladder Climbing For Exoskeleton Integration In Construction Tasks, Ehsan Shourangiz Jul 2025

Ergonomic And Biomechanical Assessment Of Vertical Ladder Climbing For Exoskeleton Integration In Construction Tasks, Ehsan Shourangiz

LSU Master's Theses

Active exoskeletons are increasingly utilized in physically demanding industries such as construction and manufacturing to reduce strain and lower the risk of work-related musculoskeletal disorders, supporting worker safety and long-term health. However, most existing systems are designed for repetitive tasks like lifting or prolonged standing, with limited consideration for dynamic activities such as vertical ladder climbing. Ladder climbing is common and physically demanding in industrial environments, often required to access elevated areas like scaffolding, tanks, or rooftops. Since exoskeletons are intended to remain worn throughout multiple tasks, requiring workers to remove and re-don the device during ladder climbing would reduce …

Go to article

Comparative Analysis Of The Efficiency Of Reverse Osmosis And Hydroxyapatite For Fluoride Removal In Water: A Case Of Auwsa, Innocent J. Macha Jun 2025

Comparative Analysis Of The Efficiency Of Reverse Osmosis And Hydroxyapatite For Fluoride Removal In Water: A Case Of Auwsa, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Water treatment technology selection depends on contaminant type and budget. Fluoride removal from water is particularly challenging, requiring non-conventional treatment technologies (Radwan, 2023). Several regions in Tanzania, including Arusha City, are affected by fluoride contamination. With a population of 617,631 (Census, 2022), only 117,763 people currently have access to clean water supplied by AUWSA. This study aimed to compare the efficiency of Reverse Osmosis (RO) and Hydroxyapatite (HAP) in fluoride removal as a strategy to address water quality and supply challenges. Experiments were conducted using 6 m³ of raw water with fluoride concentrations ranging from 5.1 mg/L to 6.83 mg/L, …

Go to article

A Smart System For Detecting Anatomic And Histological Symptoms Of Diseased Agricultural Plants, Rustam Baratov, Himola Sunnatillayeva, Alimardon Mamatovich Mustafoqulov Jun 2025

A Smart System For Detecting Anatomic And Histological Symptoms Of Diseased Agricultural Plants, Rustam Baratov, Himola Sunnatillayeva, Alimardon Mamatovich Mustafoqulov

Chemical Technology, Control and Management

This study describes a novel agricultural plant disease detecting smart system, capable of handling measured plant body parameters and images received by high resolution camera at the same time. The proposed plant disease detection method is based on evaluation of the signals received by measured and controlled plant body physical parameters like resistance, temperature and capacitance of the plant stem and image processing. An analogue plant model based on an electrical circuit with distributed parameters was developed. In addition, in the article the block diagram of the smart system for the early detection of plant diseases, the circuit diagram, its …

Go to article

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi Jun 2025

The Role Of Internal Factors On Vehicular Mobility, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Vehicle mobility internal factors are influenced by the performance state of the road surface quality, governor, engine, gear train, differential unit and mobility unit. Studies on vehicular mobility models exist for off-road external factors but absent on on-road internal factors. The on-road internal factors model describes the vehicular mobility performance as a function of internal factors. In the current undertaking, results are generated by the determination of mobility performance characteristics with the application of 2nd Order Ordinary Differential Equations and using Laplace operator with MATLAB Software simulation. The effect of road surface against the time taken varies accordingly. At a …

Go to article

Community Wastewater Treatment Resilience Assessment, Tristan Veal May 2025

Community Wastewater Treatment Resilience Assessment, Tristan Veal

All Theses

With the rising threat of climate change and cascading impacts from infrastructure failure there is a growing need to strengthen community resilience. Theoretical and practical resilience frameworks are available, but they vary in aim and scope; there is no standard tool to assess resilience. This research expands on the resilience matrix (RM) application methods of previous research completed by the United States Army Corps of Engineers (USACE) and Clemson University. That work focused on drinking water treatment systems and developed a few dozen specific indicators, or metrics, to quantify resilience. This research adds wastewater infrastructure with the aim of identifying …

Go to article

Microwave Ore Pre-Treatment Review And Process Flowsheet Conceptualization, Baker F. Giyani Apr 2025

Microwave Ore Pre-Treatment Review And Process Flowsheet Conceptualization, Baker F. Giyani

Tanzania Journal of Engineering and Technology (TJET)

The global demand for mineral commodities has increased dramatically over the years, and this is largely due to several factors, including technological advancements, industrialization, and a rise in population. Further, the demand keeps increasing because the ore being mined is becoming more complex, and the feed grade is declining over the years, prompting the need for innovative technologies to treat such ores more efficiently. Microwave ore pre-treatment is one of the potential technologies that can be employed to improve process performance. This is possible because ores are composed of both good-microwave heaters and poor microwave heaters, which creates thermal stresses …

Go to article

Carbon Accountability Scores: A Process-Oriented Approach For Carbon Offsetting Using Ai Agents, Joshit Mohanty, Vaishali Vaishali Apr 2025

Carbon Accountability Scores: A Process-Oriented Approach For Carbon Offsetting Using Ai Agents, Joshit Mohanty, Vaishali Vaishali

Graduate Student Government Association Research Conference

Conventional carbon offset programs rely on quantified emissions to determine balancing requirements. While this approach offers a standardized means of measuring carbon output, it often provides industries with a loophole—allowing them to offset their emissions by purchasing equivalent credits for activities such as tree planting rather than tackling inefficiencies at the source. This research proposes a process-based framework called Carbon Accountability Scores (CA scores) to offer a proactive strategy for assessing and reducing carbon footprints. Instead of focusing on the mere balancing of emitted and sequestered carbon, CA scores integrate an organization’s operational processes into the calculation, thereby offering the …

Go to article

Intelligent Turning Cyber-Physical Systems Modeling Using Sysml, Prithbey Raj Dey, David Lee Enke, Mario F. Buchely Mar 2025

Intelligent Turning Cyber-Physical Systems Modeling Using Sysml, Prithbey Raj Dey, David Lee Enke, Mario F. Buchely

Engineering Management and Systems Engineering Faculty Research & Creative Works

Cyber-Physical Systems (CPS) support industrial automation that incorporates people, hardware, signal, computation, and control using networking to achieve desired results. The complex automated CPS design demands a standard and comprehensive approach to appropriately identify the system requirements, define the architecture, and model the relationships among the software and hardware components. Systems Modeling Language (SysML) provides the capability for a comprehensive modeling to capture the desired design requirements in the systems architecture. SysML enables performance estimation of the model by analyzing constraints while identifying interactions among the components through various behavioral diagrams. In this paper, SysML is applied to the design …

Go to article

Design Of An Electro-Hydraulic Laboratory Test System For Adjusting The Inclination Angle Of Sowing Machines, Aytac Moralar, Figan Dalmis, Bahattin Akdemir Mar 2025

Design Of An Electro-Hydraulic Laboratory Test System For Adjusting The Inclination Angle Of Sowing Machines, Aytac Moralar, Figan Dalmis, Bahattin Akdemir

The Philippine Agricultural Scientist

Field testing of grain sowing machinery requires favorable field conditions and sufficient time periods, making laboratory tests a preferred alternative for determining performance under controlled conditions. However, a standardized testing system for evaluating sowing machinery has not yet been established. In this study, a test system was designed for laboratory testing of universal grain sowing machines. A movable platform was built on a chassis made using sheet metal with different dimensions and profiles. It operates through a hydraulic system via a programmable logic controller-based control system. The sowing machine placed on this platform allows for inclination adjustments (front, back, right, …

Go to article

The Application Of Decision Analysis Theory For Space Allocation At The Air Force Institute Of Technology, Damian N. Soriano Mar 2025

The Application Of Decision Analysis Theory For Space Allocation At The Air Force Institute Of Technology, Damian N. Soriano

Theses and Dissertations

This thesis investigates the application of Decision Analysis Theory to optimize space allocation at the Air Force Institute of Technology (AFIT). Through a Multi-Objective Decision Analysis (MODA) framework, this study addresses existing methodologies for space allocation in military, academic, and office settings; the rules, limitations, and factors influencing space utilization at AFIT; and approaches to improve office and lab allocations for institutional efficiency and fairness. This research incorporates qualitative and quantitative metrics, including faculty and student data, research outputs, and historical space usage. These findings highlight significant complexities in space allocation, particularly in reconciling administrative and research requirements with structural …

Go to article

Simulation-Based Models For Postearthquake Response: A Survey And Research Directions, Abhijit Gosavi, Lauryn A. Spearing, Lesley H. Sneed Feb 2025

Simulation-Based Models For Postearthquake Response: A Survey And Research Directions, Abhijit Gosavi, Lauryn A. Spearing, Lesley H. Sneed

Engineering Management and Systems Engineering Faculty Research & Creative Works

Computer simulation is increasingly being used by emergency planners as a tool to improve disaster response given that it can model real-world scenarios, such as earthquakes. Although there has been an increase in simulation research focused on disaster response, much of this literature is from disparate fields and across disaster scenarios. To bridge this gap, this paper surveys simulation-based models for post-earthquake response from the year 2000 onward. Advantages of simulation over closed-form statistical models are discussed. Three main subproblems in post-earthquake response models are explored: (1) service distribution (e.g., food, water), (2) infrastructure restoration (at the building and transportation …

Go to article

Improved Minimum Variance Channel Estimation Techniques For Ofdm Systems, Kwame S. Ibwe Jan 2025

Improved Minimum Variance Channel Estimation Techniques For Ofdm Systems, Kwame S. Ibwe

Tanzania Journal of Engineering and Technology (TJET)

Orthogonal frequency division multiplexing (OFDM) systems face challenges in channel estimation due to noise, variability, and the doubly dispersive nature of wireless channels, which degrade performance. To address these challenges, a multichannel minimum variance double dispersive channel estimator is proposed. The method employs a hybrid approach that combines subspace and minimum variance techniques, optimizing the filter bank output power under a signal-to-noise ratio (SNR) constraint. This design preserves the desired signal while effectively suppressing disturbances, achieving robust performance with reduced computational complexity compared to existing methods. Simulation results demonstrate that the proposed estimator outperforms subspace and asymptotic methods in terms …

Go to article

A Design And Analysis Of Computer Experiments Approach To Water Distribution Network Seismic Rehabilitation Optimization, Uthman Abiola Kareem Jan 2025

A Design And Analysis Of Computer Experiments Approach To Water Distribution Network Seismic Rehabilitation Optimization, Uthman Abiola Kareem

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Water is an essential part of human life. However, there are critical infrastructures that enable water availability in communities and homes. One of such is a water distribution network. Water distribution network performance depends on its reliability, which could be threatened by external agents like earthquakes. When earthquakes occur, they cause damages on some pipes within the distribution network and this limits performance of water distribution network. While earthquakes cannot be prevented, effective maintenance intervention may reduce the impact of earthquakes on water distribution networks. In order to develop an effective maintenance plan, researchers approach it in different ways. However, …

Go to article

Pla Polymer Binder In Core Production - Influence On Final Casting Dimensions, Artur Soroczyński, Krzysztof Rechowicz Jan 2025

Pla Polymer Binder In Core Production - Influence On Final Casting Dimensions, Artur Soroczyński, Krzysztof Rechowicz

Virginia Digital Maritime Center (VDMC) Faculty Publications

The foundry industry is seeking an ecological alternative to synthetic molding resins. This study evaluates the technological properties of core sands bonded with biodegradable polylactide (PLA). Cores prepared on a 2% quartz sand matrix were subjected to casting processes using two alloys with extremely different pouring temperatures: gray cast iron (approx. 1200 °C) and AK11 silumin (approx. 710 °C). The research methodology included macroscopic assessment, dimensional analysis using 3D scanning (GOM Inspect), and qualitative knock-out assessment supported by numerical temperature field simulation. The results showed that the high crystallization temperature of cast iron leads to complete thermal degradation of the …

Go to article

Data Driven Bridge Deck Deterioration Modeling And Maintenance Intervention Scheduling, Deepak Kumar Jan 2025

Data Driven Bridge Deck Deterioration Modeling And Maintenance Intervention Scheduling, Deepak Kumar

Dissertations and Theses

Majority of over 617,000 bridges across the United States are significantly impacted by environmental factors, aging materials, and heavy traffic loads. According to the 2021 Infrastructure Report, nearly 231,000 bridges require repair or preservation work, with 46,154 (7.5%) being classified as structurally deficient, thereby posing risks for mor than 178 million daily trips across these bridges. Despite recent improvements, 42% of U.S. bridges are at least 50 years old, underscoring an urgent need for increased investment to meet repair demands. The nation’s backlog of bridge repairs is estimated at $125 billion, with a 58% increase in annual spending required to …

Go to article

Physics-Informed Deep Learning With Kalman Filter Mixture For Traffic State Prediction, Niharika Deshpande, Hyoshin (John) Park Jan 2025

Physics-Informed Deep Learning With Kalman Filter Mixture For Traffic State Prediction, Niharika Deshpande, Hyoshin (John) Park

Engineering Management & Systems Engineering Faculty Publications

Accurate traffic forecasting is crucial for understanding and managing congestion for efficient transportation planning. However, conventional approaches often neglect epistemic uncertainty, which arises from incomplete knowledge across different spatiotemporal scales. This study addresses this challenge by introducing a novel methodology to establish dynamic spatiotemporal correlations that captures the unobserved heterogeneity in travel time through distinct peaks in probability density functions, guided by physics-based principles. We propose an innovative approach to modifying both prediction and correction steps of the Kalman Filter (KF) algorithm by leveraging established spatiotemporal correlations. Central to our approach is the development of a novel deep learning model …

Go to article

Relationship Between Historic Evolution, Urbanization And Mobility In Ibadan, Nigeria, Aisha Adams Oct 2024

Relationship Between Historic Evolution, Urbanization And Mobility In Ibadan, Nigeria, Aisha Adams

Tanzania Journal of Engineering and Technology (TJET)

Ibadan is said to be the biggest indigenous city in Nigeria with a population of about 4.04 million, making it the third largest city in the country after Lagos and Kano. Since its founding in 1829, Ibadan has experienced urban evolution that is mostly unguided. With its high fertility rate, population growth and rural-to-urban migration, Ibadan has experienced significant urban sprawl that has resulted in challenges in urban mobility especially to the lower-income earners. This study looks at the relationship between urban planning, urbanization and mobility in the city of Ibadan. The study found that lack of integrated land use …

Go to article

Urbanization And Urban Sprawl In The Post-Colonial Era Douala City, Cameroon, Sylvia Munisi Oct 2024

Urbanization And Urban Sprawl In The Post-Colonial Era Douala City, Cameroon, Sylvia Munisi

Tanzania Journal of Engineering and Technology (TJET)

The history of the port city of Douala spans pre-colonial period, colonial period of the Germans and French occupation, the post-colonial era and the contemporary situation with continuous occupancy of the coastal environment. This article looks at the relationship between the history of the city of Douala to the resulting urban situation focusing on governance structure as well as rapid urbanization. The findings show that governance structure allowing for a duality of modern political system and traditional cultural system of kingships and chiefdoms has an effect to the resulting urban sprawl. Moreover, rapid urbanization under this condition has an overall …

Go to article

The Use Of Locally Available Materials Towards Urban Planning For Sustainable Construction: The Case Of Gondar-Ethiopia, Kidist Dereje Oct 2024

The Use Of Locally Available Materials Towards Urban Planning For Sustainable Construction: The Case Of Gondar-Ethiopia, Kidist Dereje

Tanzania Journal of Engineering and Technology (TJET)

The city of Gondar in northern Ethiopia has a rich history that is connected to urban planning and construction. From the era of the Fasiledes that built masonry castles, Italian colonialism that zoned the city on racial boundaries and the post-colonial planning that wanted a more global standard, Gondar has been subjected to different planning and construction methods. This evolution however, has brought about challenges related to the sustainability of the construction industry and the communities within the city. This paper analyses the relationship between urban planning and use of local construction materials to attain sustainable development of the city. …

Go to article

Transport Mobility Analysis For Informal Settlements In Dar Es Salaam, Tanzania, Fatma Kassim Mohamed Oct 2024

Transport Mobility Analysis For Informal Settlements In Dar Es Salaam, Tanzania, Fatma Kassim Mohamed

Tanzania Journal of Engineering and Technology (TJET)

Dar es Salaam is one of the world’s fastest growing cities and is expected to be the third largest by 2100 with a population of 76 million. Dar es Salaam city is made of multiple neighbourhoods that are very diverse in terms of socio-economic status, gender, age and prevalent activities. One of the biggest challenges facing the city of Dar es Salaam is urban sprawl due to informal settlements that in turn leads to very long travel time and hinders equal mobility and accessibility of labour and goods. This study found that the current mobility vision for Dar es Salaam …

Go to article

Investigating The Relationship Between History, Urbanization And Wealth Gap In Johannesburg, South Africa, Abdallah F. Kaamah Oct 2024

Investigating The Relationship Between History, Urbanization And Wealth Gap In Johannesburg, South Africa, Abdallah F. Kaamah

Tanzania Journal of Engineering and Technology (TJET)

The city of Johannesburg is the largest city in South Africa and named as one of the economic drivers of the country. However, the city has the widest wealth gap in the country. This article examines the relationship between historical occurrences, urbanization, and the resulted wealth disparity in Johannesburg and look at the mitigation measures. The findings point to the wealth disparity in the city as a multifaceted problem influenced by historical, urbanization, and political variables. Comprehensive and multifaceted policy initiatives are required to address the structural causes of inequality and the urgent needs of vulnerable populations to close the …

Go to article

Final Report - An Interactive System For Training And Assisting Bridge Inspectors In Inspection Video Data Analytics, Genda Chen, Ruwen Qin, Mohammad Hossein Afsharmovahed, Kevin Lai, Ritesh Sharma Sep 2024

Final Report - An Interactive System For Training And Assisting Bridge Inspectors In Inspection Video Data Analytics, Genda Chen, Ruwen Qin, Mohammad Hossein Afsharmovahed, Kevin Lai, Ritesh Sharma

Project WD-4

This project aims to develop an interactive, web-based system to assist bridge inspectors in machine learning and video analytics for a rapid condition state assessment of bridge elements in accordance with the 2019 Manual for Bridge Element Inspection. Referred to BridgeNet, the system includes region-based convolutional neural network (RCNN) models for bridge element and defect segmentation and an inspection video analytic tool that is integrated into a unified graphical user interface (GUI). It provides users with an image-based testbed of modulated RCNN models. The BridgeNet has evolved in four phases: (1) backend and frontend framework setups, (2) Mask-RCNN-based bridge segmentation, …

Go to article

The Effects Of Corporate Culture On Firm Growth: Evidence From Tanzania’S Construction Firms, Fred P. Okangi Aug 2024

The Effects Of Corporate Culture On Firm Growth: Evidence From Tanzania’S Construction Firms, Fred P. Okangi

Tanzania Journal of Engineering and Technology (TJET)

Corporate culture is one of those important aspects that determine the growth of firms. This study investigates the effects of the different types of corporate culture on the growth of Tanzania’s local construction firms. A survey of 227 Tanzania’s construction firms was undertaken using semi-structured questionnaire. The data collected were quantitatively analysed using Stata 13.0 software. The study results indicate that only the hierarchy type of corporate culture positively and significantly impacts the growth of Tanzania’s construction firms. The other types of corporate culture, such as adhocracy, market, and clan had insignificant effects on the growth of the construction firms …

Go to article

Exploring The Transformation Of Sustainable Collective Spaces: A Study From Mlalakuwa Informal Settlement, Jacob Lutta Aug 2024

Exploring The Transformation Of Sustainable Collective Spaces: A Study From Mlalakuwa Informal Settlement, Jacob Lutta

Tanzania Journal of Engineering and Technology (TJET)

A major challenge in collective space transformation is addressing the complexity of informal urbanisation in developing countries. Using a case study approach, this paper examines the concerns related to a particular informal settlement's sustainable collective space transformation. One of the key findings is that the absence of formal rules and regulations in the development of informal settlements in combination with land-grabbing leads to the absence of open spaces that could be used collectively. It is observed that sustainability in urban development is another body of critical thought that integrates several streams of current urban elements and embodies various conceptions of …

Go to article

Lean Manufacturing Practices In Tanzania: Exploring Awareness, Training And Capital Investment, Francis D. Sinkamba Aug 2024

Lean Manufacturing Practices In Tanzania: Exploring Awareness, Training And Capital Investment, Francis D. Sinkamba

Tanzania Journal of Engineering and Technology (TJET)

With the growing competition among industries in the world, manufacturing industries are now forced to adopt the Lean Manufacturing philosophy to improve their competitive abilities. The adoption of the philosophy is very low in developing countries such as Tanzania, as is demonstrated with 1% of publications and the lack of knowledge and capital for Lean Manufacturing implementation causes this. Furthermore, the contribution of the sector to the Gross Domestic Product in Tanzania is low and stands at 8.4%. The study wants to bridge the gap in training, capital and awareness of Lean Manufacturing in Tanzania. Survey and purposive sampling techniques …

Go to article

Modeling The Influence Of Internal Factors On Vehicular Mobility Performance, Aziz Mdimi Aug 2024

Modeling The Influence Of Internal Factors On Vehicular Mobility Performance, Aziz Mdimi

Tanzania Journal of Engineering and Technology (TJET)

Traffic mobility is significantly influenced by road conditions and the internal factors governing vehicular performance. Internal factors play a crucial role in vehicular mobility, influencing vehicles operate and performance. While existing vehicular mobility models primarily address external factors, external factors such as governor, engine, gear train and differential unit remain underexplored. This study formulates a comprehensive model to address this gap, focusing on the internal components that affect vehicular mobility. The proposed model employs both analytical and numerical methods to derive transfer functions for these subsystems using Matrix Laboratory (MATLAB), aiming to capture the dynamic behavior of vehicles under various …

Go to article

Quantifying Lock Criticality For Inland Waterway Navigation Using An Agent-Based Simulation, Ashwin Narayan Aug 2024

Quantifying Lock Criticality For Inland Waterway Navigation Using An Agent-Based Simulation, Ashwin Narayan

Industrial Engineering Undergraduate Honors Theses

Inland waterway travel has tremendous potential to improve multimodal transportation in the United States due to its environment-friendly and safe nature. Waterway travel has proven to be much cheaper per ton-mile and more fuel efficient than trucks. Millions of dollars have recently been invested in inland waterway networks to facilitate travel. The waterway infrastructure must be resilient to enable efficient waterway travel and prevent unnecessary delays. Locks, an important component of waterway infrastructure, enable vessels to travel between waterways of varying depths and must be maintained consistently to avoid unexpected failures. However, with limited resources, it is difficult to preserve …

Go to article

An Emergency Response System To Assist The Movement Of Vehicles During Emergency Operations In Urban Transportation Networks, Jamal Nahofti Kohneh Aug 2024

An Emergency Response System To Assist The Movement Of Vehicles During Emergency Operations In Urban Transportation Networks, Jamal Nahofti Kohneh

All Dissertations

Emergency responders need to arrive at the emergency scene as soon as possible, but operating vehicles under emergency conditions can pose a risk to both the responders and other road users, potentially resulting in crashes or delays in emergency operations. In this research, an emergency response system is proposed to assist emergency and non-emergency response vehicles (ERVs and non-ERVs) during emergency operations in a connected vehicle environment. This system collects the information from connected ERVs and non-ERVs, utilizes this information as inputs in the proposed models, and sends instruction messages back to vehicles. The proposed models provide the fastest ERV …

Go to article

Analysis Of Cost And Time Efficiency In Container Distribution Between Container Truck And Freight Train From Industrial Area To Port, Indah Imayanti, Sutanto Soehodho, Nahry Yusuf Jun 2024

Analysis Of Cost And Time Efficiency In Container Distribution Between Container Truck And Freight Train From Industrial Area To Port, Indah Imayanti, Sutanto Soehodho, Nahry Yusuf

Smart City

Jakarta International Container Terminal (JICT) in Tanjung Priok Port , which serves export and import containers, can serve up to 5500 TEUs daily. However, no more than 1% of the total containers are transported by freight trains, meaning that 99% of container distribution from industrial areas is carried by trailer trucks. This condition causes a long queue at the container terminal entrance, resulting in delays in the services as well. Currently, Tanjung Priok Port is connected to rail transportation from Cikarang dry port with the frequency of twice a day with 30 flatcars (FC) for each trip. The capacity of …

Go to article

Examining The Impact Of Customer Rfp Characteristics On Award Compliance, Laasya Ravipati May 2024

Examining The Impact Of Customer Rfp Characteristics On Award Compliance, Laasya Ravipati

Data Science Undergraduate Honors Theses

In the context of intermodal transportation, understanding the dynamics of award compliance holds significant importance for operational efficiency and strategic decision-making. Award compliance refers to the percentage of awarded freight volume that is realized, indicating the extent to which contractual agreements are fulfilled. This analysis delves into the intricate relationship between customer characteristics and award compliance, aiming to provide valuable insights into the variability and predictability of compliance rates. By analyzing Request for Pricing (RFP) data and primary awarded freight volumes, the study seeks to address the need for more accurate volume estimations, crucial for sales planning, revenue projections, and …

Go to article

First Prev Next Last