Ocean Engineering Commons^™

Developing A Roadmap For Green Port In Timor-Leste, Emanuel Da Silva Maia

World Maritime University Dissertations

No abstract provided.

The Waterbug: Adaptive Paddle Board Frame, Remy James Elio Lacchia, Katie Kellum, Madeline Evenson, Shelbi Sullaway

Mechanical Engineering

People with disabilities, particularly wheelchair users, face limitations in participating in outdoor activities like paddleboarding. Central Cal Adaptive, a nonprofit organization, aims to bridge this gap by offering adapted paddleboarding experiences. However, their current paddleboard presents challenges such as portability, range of motion, stability, and safety. Our team, comprising Madeline Evenson, Remy Lacchia, Katie Kellum, and Shelbi Sullaway, has collaborated with Central Cal Adaptive to refine the existing paddleboard design. The team’s goal is to enhance the paddleboard's functionality to better cater to wheelchair users' needs, ensuring lightweight, portable, and safe features for an improved outdoor experience.

Our paddleboard concept …

Swim Fly Drone, Alia Wolken, Sha'anan Levy, Andrew Jwaideh, Eduardo Santos

Mechanical Engineering

This project addresses the need for a versatile drone that is capable of operation in both air and water environments, with potential applications in infrastructure inspection, defense, search and rescue, and ocean exploration. This project focuses on the design and development of a waterproof aerial drone capable of floating on the water surface and submerging underneath to controlled depths with the integration of a custom detachable buoyancy chamber. The buoyancy chamber design utilizes syringes to compress and decompress air inside of the chamber, changing the volume of the chamber, with an actuation system controlled by a closed-loop control system that …

Evaluating The Multi-Valued Bartlett Processor, Daniel Robert Frister

Dissertations and Theses

A variety of approaches exist to track targets in the ocean using acoustic sensors, and the complex mix of source characteristics, environmental effects, and sensor array limitations can make the selection of an appropriate algorithm challenging. This thesis models in simulation a recently proposed signal processing method that is intended for use with a large rectangular sensor array to track the bearings of multiple sources. The method, referred to as the Multi-Valued Bartlett (MVB) processor, is an eigenvector beamformer that leverages the capabilities of large arrays to locate in bearing multiple sources simultaneously. The analysis of this thesis details the …

Basic Psychological Needs Satisfaction And Well-Being Among Seafarers: An Investigation Of Interaction Effects Through The Lens Of Self-Determination Theory, Nong Vuong Phi, Kung Don Ye, Feng Ming Tsai, Hsiao Chao Hsieh, Shiou-Yu Chen

Journal of Marine Science and Technology–Taiwan

Enhancing employee well-being is a primary goal for enterprise sustainable development. Although seafarers represent a major human resource in the maritime industry, the distinctive demands of their profession often compel them to compromise on certain elements in fulfilling their basic psychological needs, thereby contributing to mental health challenges. Recently, COVID-19 and its associated border control measures have prolonged the voyages of seafarers, drawing public attention to the topic of seafarer well-being. In this study, self-determination theory was used to explore the effects of autonomy, competence, and relatedness as fundamental psychological needs on seafarer well-being. After the independent effects of these …

An Optimal Schedule Recovery Model For Transportation Carriers Under Uncertain Typhoon Disruption Periods, Yi-Chun Chen, Shangyao Yan

Journal of Marine Science and Technology–Taiwan

Due to the unsettled weather conditions caused by typhoons, it is not possible to forecast the time when a typhoon will arrive or depart accurately. The uncertainty regarding the duration of typhoon disruptions makes it challenging for transportation carriers to efficiently adjust their schedules. In this study, to deal with the problem of airline fleet rerouting, flight rescheduling, and passenger reassignment for uncertain disruption periods caused by a typhoon, we utilize network flow techniques with the concept of probability to construct a stochastic model for minimizing the total operating costs. A heuristic algorithm based on the divide-and-conquer technique is adopted …

Prediction Of Mooring System Characteristics Of The Floating Barge Using Deep Neural Networks, Janghoon Seo, Dong-Woo Park

Journal of Marine Science and Technology–Taiwan

The present study establishes deep learning models to predict the tensions and inclinations of mooring lines of a floating barge and verifies applicability of these models. Hydrodynamic and mooring analyses are conducted on the dataset used for the deep learning models. Three types of neural network models include a deep neural network (DNN) with input data representing the six degrees of freedom motions of a floating barge, convolutional neural network (CNN) with input images of the floating barge and mooring lines on a horizontal plane, and hybrid neural network (HNN) that consolidates the characteristics of DNN and CNN models. The …

Integrated Environmental Vulnerability Assessment And Adaptation Strategies For Coastal Areas Under Sustainable Development, Lien-Kwei Chien, Yu-Chi Li, Chia-Feng Hsu

Journal of Marine Science and Technology–Taiwan

This research focuses on the holistic management and environmental vulnerability of coastal areas in Taiwan within the framework of sustainable development. With economic and social growth gravitating towards coastal regions, the strain on the natural environment is increasing. Therefore, discovering a balance between economic progress and environmental conservation is paramount. To decipher the vulnerability of Taiwan's coastal zones, this study first defines ‘Integrated Environmental Vulnerability of Coastal Areas.’Key vulnerability factors were identified across environmental, social, and economic dimensions. Seven core determinants were determined using the Fuzzy Delphi method: biodiversity, coastal erosion, water pollution, population density, population aging, land utilization, and …

Evalution Of The Ability To Infer Tilt Angle And Size Distributions Of Fish Using A Broadband Scientific Echosounder Based On Simulation, Jing Liu

Journal of Marine Science and Technology–Taiwan

The biological information, such as species, size, and tilt angle, is crucial for converting the echo data into biomass information in acoustic surveys. Typically, the information can be obtained through trawl net sampling or underwater camera observations. However, both methods have some limitations. To overcome these limitations, scientists have utilized inversion methods with multi-frequency and broadband echosounders to derive biological information about fish, plankton, and krill. However, evaluating the reliability and accuracy of these inversion methods has been challenging due to the difficulty in obtaining accurate biological information. In this study, a numerical simulation method was used to generate fish …

A Marine Knowledge System For Ocean Affairs: Integrating Data, Evaluating Usage, And Enabling Sustainable Marine Management, Yu-Jen Pan

Journal of Marine Science and Technology–Taiwan

This study presents the evolution and assessment of the Marine Knowledge Education System (MKES), designed to improve user acceptance among students in professional marine science courses in Taiwan. The MKES leverages real-world maritime cases from the General Coast Guard Administration and is built upon existing technologies like cloud services, social networks, and data analysis tools. The technology acceptance model (TAM) provides the theoretical underpinning for the assessment of user confidence. Data was collected from 190 participants through purposive sampling. Path analysis confirmed all hypothesized relationships within the TAM with statistical significance (p < 0.001). Additionally, paired-sample t-tests revealed a significant increase in student acceptance of the MKES after integrating it into the marine science curriculum. These findings underscore the capacity of the MKES as a digital learning tool to enrich course pedagogy and improve student learning outcomes, thereby offering valuable support in advancing the education of professional marine managers.

Design And Implementation Of An Inverted Short Baseline Acoustic Positioning System, Jakob Frabosilio

Master's Theses

This document details the design, implementation, testing, and analysis of an inverted short baseline acoustic positioning system. The system presented here is an above-water, air-based prototype for an underwater acoustic positioning system; it is designed to determine the position of remotely-operated underwater vehicles (ROVs) and autonomous underwater vehicles (AUVs) in the global frame using a method that does not drift over time.

A ground-truth positioning system is constructed using a stacked hexapod platform actuator, which mimics the motion of an AUV and provides the true position of an ultrasonic microphone array. An ultrasonic transmitter sends a pulse of sound towards …

Inspection Planning Of Subsea Pipeline Using Risk-Based Inspection, Ni Luh Triska Adelia, Badrul Munir, Johny Wahyuadi Soedarsono

Journal of Materials Exploration and Findings

Pipelines are an important tool in oil and gas exploration. Pipeline is a transmission and liquid collection lines, including their accessories, which transport fluids from one plant to another. In transmission and collection process, there is a possibility of failure which can have minor to major impact on personnel injury, the environment and interrupt the business process. To maintain safety and to prevent accidents, the source and cause of failure needs to be calculated. Risk-based inspection (RBI) is a method that can be used to calculate the risk and determine the inspection planning both schedule and method, by combining the …

Corrigendum To “Evaluation Of Operational Performance Of Wusongkou Cruise Port Through Network Data Envelopment Analysis”

Journal of Marine Science and Technology–Taiwan

No abstract provided.

Analysis Of The Potential For Enhancing The Efficiency Of A Floating Photovoltaic (Fpv) System, How-Ping Wu, Ching-Yi Tseng, Chuan-Chung Jen, Yuan-Ching Chiang, Sih-Li Chen

Journal of Marine Science and Technology–Taiwan

This study examined the power generation capabilities of FPV systems and the advantages of employing active cooling on floating solar panels. Floating solar panels exhibit improved efficiency due to operating at lower temperatures facilitated by the cooling effect of water evaporation. Additionally, the high availability of water renders the application of the active cooling technique economically viable. This study developed a comprehensive simulation of a floating solar system, integrating a mathematical model to validate experimental findings and a temperature model derived from an energy equation specific to floating solar panels. This model calculates the heat transfer among the three different …

2024 Marine Energy Collegiate Competition, Nora Riedinger, Miles Mikkelsen, Brendan Stratford, Derek Tom, Zach Kwast, Harmon Yanikian-Sutton, Kennedy Urcelay, Tori Thomas, Brady Caron

Mechanical Engineering

PolyWave Energy is the second team from California Polytechnic University at San Luis Obispo to compete in the Marine Energy Collegiate Competition. PolyWave Energy consists of Mechanical Engineering, Electrical Engineering, and Business Administration students who have worked together from September 2023 to May 2024 on designing, building, and testing a marine power device to serve a selected market.

In response to the escalating concerns surrounding carbon emissions, climate change, and the depletion of fossil fuels, California Polytechnic State University’s Polywave Energy team has developed a sustainable and reliable energy source for Autonomous Underwater Vehicle (AUV) charging. Through extensive research of …

Design And Assembly Of A Variable Buoyancy System For An Autonomous Underwater Vehicle, Evan Brown

Master's Theses

Autonomous underwater vehicles (AUVs) play a vital role in the surveillance and mapping of our oceans, often requiring extensive travel in extreme environments. These data-gathering missions benefit from extended durations, making the minimization of power consumption a key consideration in AUV design. One effective strategy to reduce energy use in AUVs is to implement a variable buoyancy system (VBS) for depth control. The purpose of this work is to design, develop, test, and model a variable buoyancy system to enhance the efficiency and capabilities of a high-speed, long-range AUV.

After evaluating various VBS designs, a piston-cylinder buoyancy system was selected …

The Pressure Distribution Of Rotating Cylinders Using An Onboard Wireless Data Acquisition System, Nathan Eller

Master's Theses

This thesis presents a novel, cost-effective method for mapping the pressure distribution on a rotating cylinder in cross flow, a phenomenon central to the Magnus effect. Utilizing commercial-off-the-shelf (COTS) micro-electromechanical system (MEMS) pressure sensors, a high-resolution data acquisition system was developed and integrated into a rotating cylinder model. Compared to traditional approaches, such as slip rings or one-off designs, this method proved significantly cheaper and faster while achieving comparable or superior resolution. The experimental setup, including a modified continuous rotation technique and adaptable model design, facilitated rapid testing across a broad range of Reynolds numbers and reduced frequencies, exceeding the …

Quantifying Hurricane Effects On Housing: Evaluating Damage, Loss, And Shelter Demands Using Historical And Simulated Storm Tracks, Adish Deep Shakya

All Theses

This research introduces an advanced framework which employs parametric wind field models for peak wind speeds, and building fragility curves, loss functions, and demographic data to estimate for estimating housing damage and loss. The uninhabitable units immediate displaced households, short-term and long-term shelter need households are determined. with a particular focus on those eligible for FEMA assistance. The framework's validity is reinforced by a high correlation in the analysis of recent hurricane events between estimated numbers of displaced households and actual FEMA aid recipients, where FEMA aids about 20-60% of the predicted long-term displaced households. A novel application of the …

Towing Tank Trials Of Hydrokinetic Turbine Scale Model To Support Marine Energy System Verification, Shahab Rouhi

LSU New Orleans Theses and Dissertations

In response to the escalating demand for sustainable energy solutions and the critical reevaluation of conventional fossil fuels due to environmental concerns, this dissertation embarks on a comprehensive exploration of hydrokinetic energy as a promising alternative. The study delves into the underexplored domain of hydrokinetic energy, leveraging innovative methodologies for effective utilization and harnessing, particularly through the development and investigation of hydrokinetic turbines.

In the realm of hydrokinetic energy conversion, our research has exclusively concentrated on horizontal-axis turbines, distinct from other turbine configurations. Noteworthy is the adaptation of a conventional horizontal-axis wind turbine for water currents, revealing enhanced performance through …

Investigation On The Effects Of Biofouling On The Boundary Layer, Adam N. Bacon

LSU New Orleans Theses and Dissertations

This study is an investigation of the effect of biofouling on the boundary layer of a flat plate and a NACA 4-digit series foil. Three identical hydrofoils made of resin were placed in the Gulf of Mexico at Grand Isle, Louisiana, and observed and analyzed by marine biologists at the University of New Orleans for their species composition. The resulting biofouling that grew was primarily made up of barnacles and bryozoans. The foils were submerged in an open channel flume at zero incidence and subjected to a series of experiments whose arc-length Reynolds numbers ranged from approximately 13000 to 32000. …

Evaluation Of Beach-Fx — Beach Nourishment Planning Model – Miami Beach Case Study, Brennan Chase Banks

Theses and Dissertations

Miami Beach, located on the Southeast coast of Florida, is a concerning location for coastal erosion because of the increasing intensity and frequency of tropical storms, nuisance flooding, and accelerated sea-level rise due to climate change. Miami Beach is famous for its beautiful beaches, making it a location of high interest for tourists, citizens, and investors. It is vital for coastal practitioners to accurately model coastal processes, beach evolution, and storm damage during the planning stage of coastal protection projects. The U.S. Army Corps of Engineers developed the Beach-fx model as a tool for engineers, planners, and economists to …

Blade Design And Validation Of Hydrokinetic Turbine To Harvest Water Current Energy, Setare Sadeqi

LSU New Orleans Theses and Dissertations

The innovative aspect of this research lies in the careful integration of cutting-edge technologies throughout the entire process of designing, fabricating, and testing the carbon fiber propeller for the 3-bladed horizontal axis ocean current turbine (OCT). SolidWorks software played a pivotal role in the initial design phase, enabling a meticulous and precise modeling of the propeller's geometry. The utilization of SolidWorks allowed for a detailed exploration of various design parameters, ensuring that the propeller's structure and form were optimized for performance in ocean current conditions. Moving beyond the realm of virtual design, the choice of carbon fiber as the fabrication …

Test And Evaluation Model For Midwater Docking Of Autonomous Underwater Vehicles, Parker Baillon

Theses and Dissertations

This research created a Test and Evaluation (T&E) model for midwater Autonomous Underwater Vehicle (AUV) capture. The creation of this model will allow for a better assessment of the feasibility of midwater AUV capture. To achieve this, the T&E model was exposed to various flow conditions to assess stability. Capturing an AUV in midwater, the area below the wave-affected zone to the sea floor, has many benefits for an AUV and its mission. AUVs basing missions from a midwater dock will not be affected by wave motions. A midwater dock can be transported to any mission site and deployed with …

The Effect Of Extended Saltwater Absorption And Uv Cure On The Compressive Properties Of Msla 3d-Printed Photopolymer Resin Samples With Printing Variations, Suzanne Dixon

Theses and Dissertations

Liquid Crystal Display (LCD) 3D printers, also known as Masked Stereolithography Apparatus (MSLA), is a type of vat polymerization printing technique that cures liquid resin into a solid object. This technique is relatively new. Consequently, there is a shortage of detailed research on the impact of long-term environmental exposure on the MSLA-printed materials. The research within this document informs engineers and scientists of resin compressive properties after extended exposure to saltwater and ultraviolet (UV) light. Saltwater absorption of the material was analyzed at atmospheric pressure, 30-psi, 60-psi, and 90-psi; the samples reached saturation in saltwater after 56 days. The variation …

Computational Fluid Dynamics Study Of Perforated Monopiles, Mary Kathryn Walker

Theses and Dissertations

Monopiles are used in the construction of offshore wind turbines and typically have a design life of 25 to 50 years. Over their lifecycle, monopiles are exposed to a corrosive saltwater environment, facilitating a galvanic oxidation process that quickly degrades the structure. This process can be mitigated by coating the monopile in a protective barrier and implementing cathodic protection techniques. Historically, monopile designers assumed the interior of the pile would be completely sealed and the galvanic corrosion process would eventually consume all the available oxygen, halting the reaction. However, penetrations made in the pile wall for conduit often leaked and …

Experimental Analysis Study Wave Drift Force Of Moored Floating Production Units (Fpu), Arifin Rifliansah, Wibowo Harso Nugroho

Makara Journal of Technology

Drift forces caused by sea waves and currents are an important aspect that needs to be studied in planning moored floating structures, especially Floating Production Units (FPU) type ships which are operated for oil and gas exploration. This study describes the drift forces on the FPU which is subjected to environmental loads in the form of waves. The slow-drift movement that occurs in a moored FPU, and experiencing irregular waves is a very important problem. The complexity of determining drift forces analytically and numerically requires the use of hydrodynamics model test. In the model test on a certain model scale …

Garbage Float, Gabor Papp, Max Woolverton, Scott Ulatowski, Daniel Ross, Nicholas Gayle, Bryan Merchan-Aragon, Noah Yco, Nicholas Fawcett, Jared Wright, Abdulaziz Salman G Alshahrani, Andrew Mcquire

Mechanical and Civil Engineering Student Publications

Trash pileup in our waters is an increasing problem. Removing floating plastics and debris from our ecosystem would reduce mortality rate of marine animals. Solutions for this already exist but most of them are proprietary and expensive. Therefore, an autonomous, publicly available and cheap alternative was developed to skim and clean the water surface from garbage.

Containerization Of Seafarers In The International Shipping Industry: Contemporary Seamanship, Maritime Social Infrastructures, And Mobility Politics Of Global Logistics, Liang Wu

Dissertations, Theses, and Capstone Projects

This dissertation discusses the mobility politics of container shipping and argues that technological development, political-economic order, and social infrastructure co-produce one another. Containerization, the use of standardized containers to carry cargo across modes of transportation that is said to have revolutionized and globalized international trade since the late 1950s, has served to expand and extend the power of international coalitions of states and corporations to control the movements of commodities (shipments) and labor (seafarers). The advent and development of containerization was driven by a sociotechnical imaginary and international social contract of seamless shipping and cargo flows. In practice, this liberal, …

Two-Phase Flow Simulations With Plic-Vof Method And Dynamic Mesh Refinement, Vimalan Adaikalanathan

Mechanical and Aerospace Engineering Dissertations - Archive

Two-phase flows are critical in a variety of engineering applications that span multiple length scales. These applications encompass macroscopic phenomena, such as dam breakage and wave-structure interactions, as well as microscopic events, including droplet impacts and boiling, and mixed-scale issues like spray dynamics. Accurate representation of evolving interfaces is essential for numerical simulations of these problems, and the Volume of Fluid (VOF) method combined with the Piecewise Linear Interface Calculation (PLIC) approach is employed to fulfill this requirement. To tackle the computational challenges associated with high-resolution meshes in deforming two-phase flows, Adaptive Mesh Refinement (AMR) is utilized to enhance mesh …

Nonlinear Hydrodynamic Modeling And Control Of Wave Energy Converters, Tania Demonte Gonzalez

Dissertations, Master's Theses and Master's Reports

The growing urgency to transition towards carbon-neutral energy sources has sparked significant interest in diversifying energy portfolios by incorporating renewable energies, including the untapped potential of wave energy. This dissertation sets its objectives in advancing wave energy converter (WEC) technologies by focusing on developing and validating a nonlinear modeling technique and designing control strategies to maximize energy extraction and enhance WEC efficiency. At the heart of this research is the derivation and validation of an algebraic nonlinear Froude-Krylov forces model. Building on this foundational model, a robust nonlinear sliding mode controller and a nonlinear model predictive controller are designed to …