Manufacturing Commons^™

Experimental And Numerical Studies On Laser Hot Wire Cladding By A High-Power Direct Diode Laser, Mingpu Yao

Mechanical Engineering Research Theses and Dissertations

Laser hot wire cladding is an advanced surface modification technology. It has been extensively growing during the last decades due to its high deposition rate, good metallurgical bonding between the substrate and clad layer, low dilution ratio, and small heat-affected zone. There are many kinds of lasers widely used in the laser cladding process. The high-power direct diode laser is widely welcomed because of its high energy efficiency, high electro-optic conversion efficiency, low cost, and high reliability. A rectangular-shaped direct diode laser beam combined with hot wire feeding can achieve a lower dilution depth with a uniform fusion line compared …

The Effect Of Surface Gas/Liquid Entrapment On Drag Reduction, Haosen Tan

Mechanical Engineering Research Theses and Dissertations

Economic globalization has made today’s world more closely linked, where transportation (e.g. shipping, pipeline) has played an important role. Approximately over 60% (in air), 80% (underwater), and 100% (in pipeline) propulsive power is used to overcome surface drag, so reducing surface drag will have a substantial impact economically and environmentally.

To develop a surface that has lower drag, the intuitive idea is to convert no-slip boundary conditions to slip or partial slip ones. To achieve that, the most promising approach is to replace the solid-liquid boundaries completely or partially with gas-liquid or liquid-liquid boundaries, because the shear stress is much …

Airflow Impact Upon Remote Laser Welding Quality, Baixuan Yang

Mechanical Engineering Research Theses and Dissertations

Laser induced plasma-plume and condensed particles attenuate the laser beam energy, resulting in keyhole instability and lacking penetration. There are various airflow devices that are currently used in both industrial and laboratory laser welding settings to suppress the detrimental effect of plasma plume and hot spatters. A systematic experimental and numerical study is presented in this dissertation that investigates different external airflow effects on the remote laser welding process used in automotive manufacturing applications.

The vertical airflow impact on the remote laser welding was first studied experimentally. The airflow velocity profiles of a coaxial vertical flow device were measured using …

Geometrically Complex Planar Heat Exchangers, Derli Dias Do Amaral Junior, Jose Lage

Mechanical Engineering Research Theses and Dissertations

In this study, geometrically complex planar heat exchangers, designed in line with the Constructal Law and operating at steady-state, are investigated numerically. The work is divided into two parts, one focusing on diffusion heat transfer in a rectangular plane and another on conjugate diffusion-convection heat transfer in a circular plane heat exchanger.

In the first part, a heat generating rectangular solid volume made of a low conductivity material is cooled through a small, isothermal side-section of the domain. The diffusion cooling process is improved by distributing within the heat generating material a fixed amount of a high conductivity material. The …

Anisotropic Plasticity Modeling Of Thin Sheets And Its Application To Micro Channel Forming Of Steel Foils, Jie Sheng

Mechanical Engineering Research Theses and Dissertations

Thin sheet metals and ultrathin metal foils produced by industrial rolling processes are textured polycrystalline materials and their mechanical behaviors may depend strongly on the orientation of applied loading. Consideration of such plastic anisotropy in advanced modeling of these materials is of the paramount importance in designing optimal manufacturing processes for automotive and other applications using finite element methods. This research addresses several critical issues in anisotropic plasticity modeling and its applications in analyzing micro channel forming of ultrathin stainless-steel foils. An experimental study has first been carried out on the accuracy and sensitivity of measuring the plastic strain ratios …

Rehology And Electrical Conductivity Of Particulate Composites In Additive Manufacturing, Bin Xia

Mechanical Engineering Research Theses and Dissertations

Extrusion-based multi-functional additive manufacturing (AM) has been a rapidly developing area in AM recently. Particulate composites are widely used in this area to provide different functionalities with different types of particulate additives. However, there is no systematic understanding of the behavior of particulate composites during extrusion (especially in small nozzles) or of their properties once deposited in the build. This work investigates the properties of the type of particulate composites usually used in additive manufacturing, composed of a polymer matrix material and particulate additives within the micrometer scale. The focus is on the material rheology in the nozzle/capillary (for the …

Development Of A Robotized Laser Directed Energy Deposition System And Process Challenges, Meysam Akbari

Mechanical Engineering Research Theses and Dissertations

Metal additive manufacturing (AM) is a disruptive technology, enabling fabrication of complex and near net shaped parts by adding material in a layer-wise fashion. It offers reduced lead production time, decreased buy-to-fly ratio, and repair and remanufacturing of high value components. AM processes are finding applications in many industrial sectors such as aerospace, automotive, biomedical and mold tooling. However, beside tremendous advantages of AM, there are still some challenges that prevent the adoption of this technology into high standard applications. Anisotropy and inhomogeneity in mechanical properties of the as-built parts and existence of pores and lack-of-fusion defects are considered as …

Design And Control Of Fiber Encapsulation Additive Manufacturing, Matt Saari

Mechanical Engineering Research Theses and Dissertations

This work presents the design, development, and analysis of the Fiber Encapsulation Additive Manufacturing (FEAM) system developed at the Laboratory for Additive Manufacturing Robotics \& Automation at the Lyle School of Engineering at Southern Methodist University. The innovation introduced by FEAM is the ability to insert a continuous fiber of different material into the flowing extrudate. Correctly positioning the fiber feed inside the extrudate while turning the fiber in arbitrary directions is a critical aspect of the technology. This will allow for the full exploitation of the capabilities of the FEAM technology to produce robotic components that actuate and sense. …

Hybrid Laser/Arc Welding Of Difficult-To-Weld Thick Steel Plates In Different Joint Configurations: Issues And Resolutions, Nima Yazdian

Mechanical Engineering Research Theses and Dissertations

Difficult-to-weld steels are ferrous alloys that are characterized by a low thermal conductivity, and large thermal expansion coefficient. These intrinsic features contribute to a high level of distortion and cracking susceptibility during joining of these types of steels. In an effort to address the issues associated with difficult-to-weld steels, highly concentrated beam spots like electron and laser beam welding were developed. Usage of tightly focused heat sources have been accompanied by several challenges. An extremely precise fit-up requirement was considered as the most significant issue corresponding to application of either laser or electron beam. Recently, it was found that the …

Analytical And Experimental Study Of Laser Cladding Of Ni/Wc Metal Matrix Powders Reinforced With Rare Earth Elements Using A High Power Direct Diode Laser, Mohammed Sayeed

Mechanical Engineering Research Theses and Dissertations

The corrosion and wear are major limiting factors for steel in the harsh environments and can be controlled by depositing protective passive coatings. Nickel based alloy cladding of steel offers a solution by enabling better corrosion and wear resistance, and high bonding strength. The laser surface cladding of steel was conducted using a high power direct diode laser. Layers of tungsten carbide in Ni (40%Ni-60%WC) combined with 1% and 2% Lanthanum Oxide (La₂O₃) and Cerium Oxide (CeO₂) were deposited on ASTM A36 steel substrate. The X-ray diffraction and scanning electron microscopy were employed to …