Manufacturing Commons^™

Nissan Leaf Disassembly Tool And Test Stand Design, Mariah Z. Hodge

Williams Honors College, Honors Research Projects

The Akron Engineering Tribology Laboratory has developed a water-based lubricant and aims to test and observe if the water-based lubricant could work in an electric vehicle environment. As parameters for creating a test stand to mimic an electric motor environment are not readily available online, the goal of this senior design project is to take apart a used Nissan Leaf engine to define the parameters a test stand must meet to accurately recreate an electric motor environment. Knowing these parameters, a test stand will then be designed for testing the water-based lubricants. The purpose of building a test stand to …

Ai-Based Porosity Detection In Babbitt Bore Turning, Kaylee Leggett, Hannah Adams Gemmell, Kaisa Shingleton

Williams Honors College, Honors Research Projects

For this project, an external company reached out to the University of Akron requesting assistance with defect detection during their vertical turning operations. As babbitt is removed in a vertical turning process, it occasionally reveals defects, mainly porosity, which can lead to costly downstream failures of the part. Current inspection techniques involve use of dye penetrant, which is time consuming, labor intensive, unergonomic, and a source of human error. The goal of the project is to create an alternative inspection method using an AI-based machine-learning model. After the turning operation, a camera is deployed to perform an in-place inspection, taking …

Lumacurve Control System Update, Jacob Kustra, Caleb Wengerd

Williams Honors College, Honors Research Projects

The existing track heater control system used by Lumacurve has become outdated and requires frequent maintenance due to inconsistent operation and component failures. This project aims to modernize the system through the implementation of a programmable logic controller (PLC), infrared non-contact temperature sensing, and an automated pneumatic ejection mechanism.

The redesigned system improves temperature monitoring accuracy and reduces operator intervention by automatically ejecting heated plastic tracks from the heater once the desired temperature is reached. An emergency ejection subsystem is also incorporated to safely clear tracks from the heater in the event of improper operation or system faults. Additional emphasis …

Optimization Of Post-Processing Methods For Additively Manufactured Metals, Julia R. Carano

Williams Honors College, Honors Research Projects

Ultrasonic Nanocrystal Surface Modification (UNSM) is a process used to change the surface hardness of flat-faced materials. It is a machining process using a high-powered laser and a blunt-tipped tool at high speeds which aims to improve the uniformity of the surface on most metals. By heating and pressing the surface of the workpiece, the grains of the material become less rounded and more cohesive on a microscopic level. This, ideally, results in a workpiece with improved material properties. The changes were previously observed through hardness testing.

Akron Soap Box Derby Super Kids Car, Alexis Schultz, Cooper Sites, Sean Stevenson

Williams Honors College, Honors Research Projects

This project aims to redesign the All-American Soap Box Derby Super Kids vehicle to enhance safety, accessibility, and performance while maintaining full compliance with official regulations. The Super Kids program enables children with physical and cognitive disabilities to race alongside a co-pilot, but the current vehicle design presents challenges in stability, entry/exit accessibility, and control—especially following recent regulation changes that increased vehicle speed. The redesigned car will focus on improved ergonomics, lightweight construction, and structural integrity within a $1,000 budget and a 165 lb weight limit.

An iterative engineering design process will guide the project through research, CAD modeling, FEA …

High Voltage Junction Box For Demonstrator Vehicle, Benjamin Lubowicki, Ryan Dorste

Williams Honors College, Honors Research Projects

Schaeffler, our industry sponsor for this project, is designing a battery pack for a demonstration vehicle that requires a high voltage junction box to route power to the vehicle. The project type is a unique design of a mechanical component, mechanism, and process. Our objective for this project is to assemble provided electro-mechanical components into an enclosure following a provided electrical diagram. The expected deliverables are the following: 3D CAD assembly of final product, FEA analysis of designed components, 2D print of final product, fabrication and assembly of designed parts, technical report documenting design process and installation. The skills required …

Cost-Effective Brake Rotor Resurfacing Tool, Raider Morgan, Benjamin Vaughan

Williams Honors College, Honors Research Projects

Brake rotors can develop uneven spots over time, causing vibration and poor braking performance. Commercial brake lathes are effective but often too expensive or complicated for at-home mechanics. This project aimed to create a low-cost tool, around $200–$300, to resurface four rotors in under two hours. We explored two main designs: a pad file system and a motorized endmill powered by a handheld drill. Calculations ultimately showed that the pad file was not viable, so the final prototype produced was the endmill-based design. Our testing showed we were limited by poor stiffness in the endmill and unforeseen loading. Although the …

Zips Baja Chassis Manufacturing Design, Alex Love, David Scruppi

Williams Honors College, Honors Research Projects

The Society of Automotive (SAE) annually organizes collegiate design team competitions for university organizations nationwide. Baja SAE tasks teams comprised entirely of students with developing, iterating, manufacturing, testing, and competing with an offroad race buggy in accordance with all SAE regulations. Teams are responsible for producing a tech compliant vehicle for each competition season, travelling across the United States to put their designs to the test. In the 2022-2023 competition season, SAE introduced ruleset clarifications on the chassis manufacturing process, essentially mandating the production of all vehicle frames to be manufactured entirely in house with no external assistance. A chassis …

Akronauts Turbopump Research Project, Gerald Drabeck Iii, Michael Mccalla, Joshua Skelton

Williams Honors College, Honors Research Projects

The idea of this project is to design a turbo pump template capable of fitting into future Akronauts rocket designs. This allows the rockets to travel higher due to the reduced net weight. Many methods were used to verify the rigidity and feasibility of the design, such as Finite Element Analysis and fluid dynamics simulations.

Kb Bioenergy Mobile Dewatering System Research, Wyatt Balser, Nathan Szymczak

Williams Honors College, Honors Research Projects

This report outlines the design and development of a mobile skid-mounted dewatering system intended for high-solids sludge processing at wastewater treatment facilities. The goal was to create a self-contained, transportable unit capable of reliably separating water from sludge using a screw press, while integrating upstream processes such as polymer conditioning, sludge maceration, and pumping. The final design prioritizes serviceability, structural integrity, and operational simplicity, featuring a consolidated equipment layout, engineered piping diagrams, and vendor-specified components.

Throughout the project, multiple design alternatives were evaluated using a weighted decision matrix, leading to the selection of a skid platform over a trailer configuration …

Design And Development Of A Rapid Tensile Quench Rig, Tyler Jewell, Justin Naylor

Williams Honors College, Honors Research Projects

This report outlines the design process and implantation of a tensile quenching rig that incorporated forced convection and a frequency generator. When any metal is quenched, a vapor barrier forms around it. When this happens, it limits the heat flux that may occur until the barrier turns into just nucleate boiling. The vapor barrier acts as an insulator and causes the heat flux to fluctuate, causing uneven hardening which would limit the use of some materials. To combat this effect, we are trying to use forced convection, and something new, which is adding high frequency waves into the quenching process. …

Materials Testing For Large Format 3d Printing, William Jenkins

Williams Honors College, Honors Research Projects

An ABS Carbon Fiber blend was printed into single walled hexagons at a variety of settings on a Cincinnati BAAM large format 3D printer. These hexagons were then cut down into sheets and had tensile and flexural test samples cut out of them, in order for materials testing to be performed. Tensile strength, tensile strain, young’s modulus, flexural strength, deflection and elastic modulus were all determined. A desktop CNC machine and a planer were purchased for the manufacturing of these samples, and an efficient cutting procedure was designed and optimized. After all data collection concluded, this data was thoroughly analyzed, …

Stanley Black And Decker Slag Removal Design Project, Colt Hemphill, Kyle Stober, Andrew Raymond, Robert Artrip

Williams Honors College, Honors Research Projects

My group given the task of designing a system to remove the slag of large metal plates. Removing this slag is an important step in creating the final assembly of a model. Currently we the operators are flipping the plates using a large magnet and crane. The issue that we see with the current method is the risk of injury while having the plate suspended in the air. These plates can reach upwards of 600lbs and poses a serious threat to the operators if the magnet is not secured correctly. Our new system for removing the slag is designed to …

Yankee Manufacturing Multi-Assembly Pvc-Gasket Assembly Mechanism, Lily Coss, Jessica Kun, Dana Chapin, Jenan Hasan

Williams Honors College, Honors Research Projects

This project focuses on designing and implementing an efficient mechanism to connect PVC and gasket pieces in the door assembly process at Yankee Manufacturing. The aim is to improve process efficiency and productivity by increasing the assembly rate from 130 to 195 assemblies per hour, a 38% improvement. The project involved research, design iterations, performance evaluations, and adherence to engineering codes and standards, particularly focused on safety, ergonomics, and sustainability. The design process includes addressing challenges from a previous attempt, redefining project scope, and incorporating new elements such as transitioning to the packaging process seamlessly. Ethical considerations include promoting operator …

Short Strand Carbon Fiber Reinforced Polylactic Acid Filament For Additive Manufacturing, Dale Chenoweth, Lukas Seggi, Luke Phillips

Williams Honors College, Honors Research Projects

In this design project, the additive manufacturing filament of short strand carbon fiber (SSCF) reinforced polylactic acid (PLA) composite was developed. The micro-size, precision cut SSCFs were mixed with the PLA pellets through a melting homogenization process. Through this process the composite material block is cut and divided into pieces for ease of pelletizing. The material block pieces are then pelletized to be fed through the single screw extruder to develop the SSCF-PLA composite filament. The SSCF-PLA filaments were manufactured with a varying amount of SSCF ranging from 0.5% to 10% of the material block's weight. Development of a 1% …

Battery Dunnage, Paul Hirsch, Alex Cox, Ben Strubbe

Williams Honors College, Honors Research Projects

Schaeffler is launching a new assembly line for a battery in 2025. As part of the project, it is necessary to design and fabricate a reusable dunnage (packaging) specialized for the battery, meant for safe domestic transportation in the United States. Through an iterative process, the team developed a final dunnage design out of steel components that had a maximum footprint of 62 in X 43.5 in X 29.25 in and a weight of 821.682 lbs. The dunnage is stackable on itself up to two high, weighing a total of 4,918.724 lbs. when loaded with four batteries. The design was …

3d Printed Drone (Body And Controls), Michael Dick, Hayden Pinkelman, Tanner Henderson, Logan Prince

Williams Honors College, Honors Research Projects

The objective is to build a scaled down model of a 3D printed drone capable of carrying a payload scalable to 50 lbs. for a wide array of applications. Some applications of the drone could include delivering support materials during natural disasters, such as foam to put out fire or medical aid packs to provide aid to injured people, food or package delivery, or military applications. The project has been split up into two groups. One group will be focusing on the propulsion aspect of the project, such as the electric motors and airfoil. Simultaneously, this group will design the …

Zips Racing Electric Brakes Design, Zachary Koneval, Andrew Thompson, Cory Baczkowski

Williams Honors College, Honors Research Projects

The Zips electric racing team is a collegiate team full of engineering students to make a formula electric car that competes against other universities and their cars. But before the cars make it to competition they go through a series of tests to make sure the car is able to perform in all of the actual competition stages. One of the tests for the cars is the brakes test. Where the car has to lock up all four wheels at once and stop in a square that is on the ground. So in this report we have detailed out our …

Application Of Conductivity Techniques For Interlayer Discontinuity Detection In Additively Manufactured Metal Materials, Joshua D. Newell, Riley R. Myers

Williams Honors College, Honors Research Projects

Additive manufacturing is becoming increasingly more popular and efficient. One drawback is the possibility of interlayer discontinuities forming in the material. A non-destructive technique utilizing the changing resistivity of the material as discontinuities appear was used to detect those discontinuities and was verified through additional testing of manually added through-thickness discontinuities. This technique has been proven to be useful in understanding fatigue crack growth of conventional metal and composite structures. Experimental investigation of fatigue in steel with an edge notch has been performed using these techniques to understand source and location of crack formation and growth in conventional material. Application …

Schaeffler E-Axle Value Engineering, Andrew Powers

Williams Honors College, Honors Research Projects

This project aims to design a manufacturable E-Axle end housing that improves system performance while reducing cost. The project is focused on utilizing Schaeffler's manufacturing competencies to achieve a simple assembly with a significant reduction in cost per part, while using existing machines or processes within the company. The design development process will follow the conceptual design stage through Finite Element Analysis and classical engineering calculations. Cross-functional design reviews will be conducted to ensure that agreement can be reached on the manufacturing feasibility of the design. Concepts will be entered in a decision analysis sheet to identify the best one …

Extending Trailer, Alex Grove

Williams Honors College, Honors Research Projects

The goal of this research project is to revolutionize the convenience in towable transportation. This innovative design aims to enhance the versatility of pull-behind trailers by incorporating an extendable feature, allowing users to effortlessly adjust the length according to their specific needs. Whether navigating tight spaces or accommodating extra cargo, our trailer adapts to diverse situations, providing unmatched flexibility. In addition to its adjustable length, the trailer is engineered to be compactable, addressing the storage constraints often faced by users with limited space. The collapsible design ensures easy storage without compromising on functionality, making it an ideal solution for individuals …

Yankee Feedstock Project, Nathan Mcanany, Richard Gualtiere

Williams Honors College, Honors Research Projects

This report details the design process, application, considerations, costs, and functionality of an automated tape “feedstock” machine. Yankee Insulation Products will use this project to create rolls of Aluminum foil tape that are included in their Therma-Dome assembly kit. The goal of this design will aid in the streamlining and effectiveness of the current process. When designing the automated process, the current process was evaluated for areas of improvement. Design parameters were also given to the project by the sponsoring company that were to be considered and incorporated.

Distillery, Clare Nicholas, Patrick Hanlon

Williams Honors College, Honors Research Projects

The goal for this project is to make a cost effective still. We will be implementing cost saving parts to create a cheap but effective still. From initial research conducted, we will try to combine a stainless steel still and copper still together so that the cheaper material (stainless steel) and the component that removes sulfur compounds (copper) are both implemented. The ME side of the project will focus on the actual design and construction of the parts that will be implemented into the still. Included in the design process will be calculations of heat transfer for the current and …

Recycling Metal Chips Into Usable Materials, Alex Mortensen, Ben Mortensen

Williams Honors College, Honors Research Projects

This report entails the scope, design considerations, and plans for creating a metal chip converter into metal briquettes. The construction is a set of machines with multiple processes to make the conversion happen. The process includes washing fine metal chips, drying them off, compressing them, and melting them down into usable briquettes. This project is intended to make a simple process to recycle metal chips into usable material for reuse. The project's objective is to reduce the costs of storage and recycling waste by offering a solution to recycle it into materials the shop can reuse.

The Passing Board, John Fitzgerald

Williams Honors College, Honors Research Projects

For my Honors Research Project I am taking a more personal route and looking to solve a childhood question/issue by designing a board that is small and easy to transport while also giving the best bounce pass possible. My proposed project would be a board that a soccer player can play a bounce pass onto and receive the ball from. The base of this design sounds simple enough, however, I would like to implement a way that the board can be adjusted to alter the angle of return of the soccer ball after the bounce. I also want to design …

Nidec Automated Winder, Michael Pugh, Ben A. Swartz, Andrew Leonard, Garrett Dostal

Williams Honors College, Honors Research Projects

Nidec Drive Systems is a leading electric motor manufacturing company with several facilities in the US and around the world. However, as of recent, Nidec has started to see some signs of old and outdated production machines affecting their production numbers even though the demand for electric is ever increasing. In an attempt to repair some of these issues, Nidec reached out to the University of Akron to look for senior design groups to help design and standardize better production machines. We were tasked with redesigning a new winder, which is a machine that winds the copper coils to the …

Coaxial Beam Eaxle Modeling And Analysis For Gawr Limits, Alexander Cebriak, Jackson Foster, Chris James

Williams Honors College, Honors Research Projects

The goal of this project was to design three different models of a coaxial beam eAxle for a range of electric vehicles. The requirement was to satisfy three different loading conditions, each characterized by a GAWR. These three loading conditions were 3000lb, 7500lb, and 10,000lb. This was done by first creating a model based on a basic outline given by Schaeffler. This model was then analyzed using Ansys®, and then iterated upon by designing new models using the 3D design program Solidworks. The iteration process was continued using more Ansys® analysis, as well as calculations to determine things like bolt …

Dome Tester, Clark Bates, Nikolas M. Kulin

Williams Honors College, Honors Research Projects

We are reconfiguring and modifying the previously built dome tester to be more user friendly and mechanically applicable. This has a long-term goal of being a usable teaching tool for manufacturing education within the college of engineering and polymer sciences. The dome tester pushes a metal dome into a clamped sheet of metal to test its forming limits and where necking occurs. We have implemented a better method of viewing the sheet sample as it is being deformed, and improved measuring methods for the distance a sample is deformed. By introducing these changes in conjunction with improved documentation of the …

Hendrickson Lift Kit, Matthew Rozmajzl

Williams Honors College, Honors Research Projects

This research project will be completed with Hendrickson Trailer as the sponsor. The goal of the project is to create a lift kit for a newer suspension system. The lift kit must provide enough lift force to lift an axle off the road and suspend it off the road while in transit. There are similar systems offered for different products at Hendrickson, but the configuration of this system is such that new brackets must be designed. The benefit of such a system is a reduction in wear on the lifted tires, and thus an increase in the life of the …

Quickcut Waterjet Cutter, Kennedy Dunn, Jacob Storrow, Benjamin Laughrey

Williams Honors College, Honors Research Projects

The QuickCut Waterjet Cutter was created in 2019 as a senior design project. This is the third iteration of the waterjet cutter. The goal of this project was to create an operable CNC waterjet cutter that is able to cut 1/16” tensile specimens consisting of nonferrous metal or plastic. This machine will be utilized in the Manufacturing Laboratory at the University of Akron to provide education to interested students on the waterjet cutting process, how it operates, and industrial application of the technology. Waterjet cutting is a subtractive manufacturing process which is recognized for its specialized applications such as cutting …