Manufacturing Commons^™

Workpiece Alignment For Hybrid Laser Aided Part Repair Process, Ajay Panackal Padathu, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Work piece alignment is a key issue for hybrid laser aided part repair,a process utilizing both machining and laser deposition.Proper alignment can greatly improve the accuracy of the repair process.This paper introduces a method for aligning a physical work piece and a CAD model using a Renis aw touch probe and software tools. Also discussed is a model for computing 5-axis CNC positions based on a desired work piece orientation.

Freeze-Form Extrusion Fabrication Of Ceramics, Tieshu Huang, Michael S. Mason, Greg Hilmas, Ming-Chuan Leu

Materials Science and Engineering Faculty Research & Creative Works

A novel, environmentally friendly solid freeform fabrication method called Freeze-form Extrusion Fabrication (FEF) has been developed for the fabrication of ceramic-based components. The method is based on deposition of ceramic pastes using water as the media. The ceramic solids loading can be 50 vol. % or higher and initial studies have focused on the use of aluminum oxide (Al₂O₃). The FEF system components and their interaction are examined, and the main process parameters affecting part geometry defined. 3-D shaped components have been fabricated by extrusion deposition of the ceramic paste in a layer-by-layer fashion. The feasibility …

Determination Of Dynamic Powder Modeling Parameters Via Optical Methods, Todd E. Sparks, Heng Pan, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Dynamic parameters, such as restitution and friction coefficients are important for powder flow simulations of laser based deposition processes. These parameters are difficult to find, especially for industrial metal powders. This paper introduces an optical method for measuring restitution and friction coefficients. The free falling powder flow was illuminated by a laser sheet. In order to obtain particle velocity, streaks proportional to particle velocities was generated by laser pulse obtained by a chopper. Recorded imaged were analyzed to determine particle velocities both before and after various impact conditions as well as impact parameters.

Part Repair Using A Hybrid Manufacturing System, Kunnayut Eiamsa-Ard, Hari Janardanan Nair, Lan Ren, Jianzhong Ruan, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nowadays, part repair technology is gaining more interest from military and industries due to the benefit of cost reducing as well as time and energy saving. Traditionally, part repair is done in the repair department using welding process. The limitations of the traditional welding process are becoming more and more noticeable when the accuracy and reliability are required. Part repair process has been developed utilizing a hybrid manufacturing system, in which the laser aided deposition and CNC cutting processes are integrated. Part repair software is developed in order to facilitate the users. The system and the software elevate the repair …

Sensitivity Analysis Of Process Parameters In Laser Deposition, Zhiqiang Fan, Kaushik Phatak, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In laser cladding with powder injection process, process output parameters, including melt pool temperature and melt pool dimensions, are critical for part quality. This paper uses simulation and experiments to investigate the effect of the process input parameters: laser power, powder mass flow rate, and scanning speed on the output parameters. Numerical simulations and experiments are conducted using a factorial design. The results are statistically analyzed to determine the significant factors and their interactions. The simulation results are compared to experimental results. The quantitative agreement/disagreement is discussed and further research is outlined.

Investment Casting Using Ice Patterns -- Solid Mold And Shell Mold Methods, Harish Jose

Masters Theses

"This thesis focuses on the development and implementation of the investment casting process using ice patterns. The traditional method of the investment casting process involves using wax patterns. Wax patterns tend to expand during the dewaxing process, and this causes stress on the shell wall which can eventually lead to the breaking of the wall. Ice patterns on the other hand shrink when heated. This is a very desirable property for the investment casting process. The process of dewaxing (dewatering) of ice patterns can be achieved by keeping the shells at room temperature, instead of heating the shell in an …

Application Of Laser Aided Manufacturing Process For Functionally Graded Thermal Barrier Coatings, Yashodhan Joshi

Masters Theses

"Laser Aided Manufacturing Process (LAMP) is a rapid prototyping process used to build three dimensional functional metal and ceramic parts. The process developed in the LAMP laboratory at University of Missouri-Rolla uses a 5-axis fadal CNC machine and a 2.5 KW Nd:YAG (TEM₀₀) Rofin Sinar laser. The laser power and metal/ceramic powder are the input along with auxiliary systems such as shielding gas delivery, RT data acquisition, coolant system. The hybrid process makes use of metal deposition and machining to obtain parts meeting design tolerances.

LAMP is used to improve upon the process of Thermal Barrier Coating (TBC) …