Energy Systems Commons^™

Energy Savings And Peak Demand Reduction Of A Seer 21 Heat Pump Vs. A Seer 13 Heat Pump With Attic And Indoor Duct Systems - December 2011, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

Experiments were run in an unoccupied 1600 ft2 house, the Manufactured Housing (MH Lab) at the Florida Solar Energy Center (FSEC), to evaluate the delivered performance as well as the relative performance of a SEER 21 variable capacity heat pump versus a SEER 13 heat pump. The performance was evaluated with two different duct systems: a standard attic duct system and an indoor duct system located in a dropped-ceiling space.

Analysis Of Biomass/Coal Co-Gasification For Integrated Gasification Combined Cycle (Igcc) Systems With Carbon Capture, Henry A. Long Iii

LSU New Orleans Theses and Dissertations

In recent years, Integrated Gasification Combined Cycle Technology (IGCC) has become more common in clean coal power operations with carbon capture and sequestration (CCS). Great efforts have been spent on investigating ways to improve the efficiency, reduce costs, and further reduce greenhouse gas emissions. This study focuses on investigating two approaches to achieve these goals. First, replace the subcritical Rankine steam cycle with a supercritical steam cycle. Second, add different amounts of biomass as feedstock to reduce emissions. Finally, implement several types of CCS, including sweet- and sour-shift pre-combustion and post-combustion.

Using the software, Thermoflow®, this study shows that utilizing …

2011 Fall Engr333 Project Final Report, Fall 2011 Engr333

ENGR 333

Analysis of the Bunker Interpretive Center (BIC) began during the spring of 2011 with the Engineering 382 Instrumentation Lab. To determine the energy use at the BIC, sensing equipment was placed on 44 different energy consuming devices, ranging from pumps to lights to heating and ventilation (HVAC) equipment. These data were collected over the spring and summer and then analyzed by the Engineering 333 Thermal Systems Design class during the fall of 2011. The class was tasked with determining whether or not the BIC was eligible for Energy Star certification. While the building was built to be LEED Gold certified, …

Investigation Of Selected Complexes And Alloys For Use In Hydrogen Storage And Related Applications, Michael Joseph Wolverton

Theses and Dissertations

The storage of hydrogen in adequate amounts limits its practical application as a fuel. This is especially important for automotive applications. Metal hydride based storage systems may yet be able to meet these storage parameters. However, no ideal hydride system has yet been identified. This work explores methods of increasing the feasibility of metal hydride based hydrogen storage by: (1) improvement of hydrogen uptake/release in known hydrides through catalysis, and (2) characterization of new hydrides and hydrogen storage materials. Catalysis work concerns primarily borohydrides due to their large hydrogen content. Catalysis and destabilization of borohydrides by addition of bulk alloy …

2011 Fall Engr333 Student Seminar Presentation, 2011 Fall Engr333

ENGR 333

File for student presentation, given by students in the Fall 2010 class of ENGR333.

Development Of A Structured Concrete Thermocline Thermal Energy Storage System, Bradley M. Brown

Graduate Theses and Dissertations

The past couple of decades have shown a concern when considering the way the world obtains its power. The focus has been switching from fossil fuels that have been used for hundreds of years to renewable energy sources, such as the sun. Solar energy is readily and infinitely available for harnessing. One problem with solar energy, though, is its inability to be used during the night time and during cloud covered weather. A solution to this problem is the use of energy storage mechanisms. For solar plants that use solar thermal energy (concentrating solar power plants), thermal energy storage (TES) …

Wireless Solar-Powered Thermal Imaging Camera, Andy Bonk, Billy Mcvicker, Jacob Richardson

Mechanical Engineering

Creation of a mounted wireless self-powered thermal imaging camera system.

Energy-Based Analysis Of Utility Scale Hybrid Power Systems, Kwame Agyenim-Boateng

UNLV Theses, Dissertations, Professional Papers, and Capstones

The promise of large-scale use of renewables such as wind and solar for supplying electrical power is tempered by the sources' transient behavior and the impact this would have on the operation of the grid. Among the methods cited for addressing some of those concerns are exploring the complementary nature of solar and wind power generation, and through the use of supplemental energy storage. While the technology for the latter has not been proven to be economical on a large scale at the present time, some assessments of what magnitude is required can be made. An energy-based analysis of utility …

Pulsed Fusion And Radiation-Cooled Gaseous Core Fission Rocket Performance Comparisons For A Mars Roundtrip Mission, Miles Owen

Von Braun Symposium Student Posters

No abstract provided.

Technical Note: Friction Factor Diagrams For Pipe Flow, Jim Mcgovern

Articles

This technical note describes diagrams of friction factor for pipe flow that have been prepared using, mainly, the equations that Lewis Moody used to prepare his famous diagram in 1944. The preparation of the new diagrams was prompted by the need for vector graphics versions that could be used for teaching purposes and that could be distributed freely to students and others under a Creative Commons Attribution-Share-Alike license. Using a structure very similar to that of Moody's diagram, variants with the Darcy friction factor and the Fanning friction factor have been prepared. In addition, variants have been prepared that include …

Performance Analysis Of Solar Walls In Minnesota: Final Project Report, Patrick A. Tebbe, Saeed Moaveni, Louis Schwartzkopf

Mechanical and Civil Engineering Department Publications

A study of unglazed transpired solar collectors (referred to as solar walls for this report), has been undertaken. Several installations in the Twin Cities, MN region have been identified, researched, and studied. A combination of weather stations, data logging systems, and building energy management systems were used to collect experimental data on four buildings. Performance calculations were then performed for these buildings and compared with various performance/modeling tools.

2011 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2011 ENGR333 project focused on the Bunker Interpretive Center (BIC) at Calvin University.

I asked the students “What would it take for Calvin College to obtain an Energy Star rating for the BIC? Or, if the BIC already qualifies for an Energy Star rating, what would it take to improve the energy efficiency of the BIC (as measured by Energy Star metrics) by 15%, thereby ensuring Energy Star performance of the building into the future?”

Customer

As I recall, the customer for this project was Biology faculty member Randy Van Dragt.

Evaluation Of Cathode Materials For Low Temperature (500-700c) Solid Oxide Fuel Cells, Alexander M. Lassman

Master's Theses

Solid oxide fuel cells (SOFC) have gained a great deal of interest, due to their potential for high efficiency power generation and ability to utilize hydrogen fuel, as well as various hydrocarbon-based fuels. A recent trend in SOFC development has been towards lower operating temperatures (500-700°C), which can substantially reduce the cost and complexity of the system. This thesis presents an investigation into state of the art Ba- and La- based cathode materials for use in low temperature (500-700°C) solid oxide fuel cells.

Synthesis of A-site deficient [A=0.97] Ba_0.5Sr_0.5Co_0.8Fe_0.2O₃ (BSCF) was …

Experimental And Numerical Investigations Of Tubular-Shaped Direct Methanol Fuel Cells (Dmfcs), Travis R. Ward

Master's Theses

This study focuses on both the numerical and experimental investigations of the novel, passively operated, tubular-shaped, Direct Methanol Fuel Cell (DMFC) as an alternative geometry to the traditional planar-shaped fuel cell. The benefit of the tubular geometry compared to the planar geometry is the higher instantaneous volumetric power density provided by the larger active area, which could be beneficial in applications that require a high instantaneous power while occupying a small volume. First, a two-dimensional, two-phase, non-isothermal model was developed to investigate the steady-state performance and design characteristics of a tubular-shaped, passive DMFC. It was found that a higher ambient …

In Situ Synthesis Of Ultrafine Ss-Mno2/Polypyrrole Nanorod Composites For High-Performance Supercapacitors, Jianfeng Zang, Xiaodong Li

Faculty Publications

We report a remarkable observation that is at odds with the established notion that β-MnO₂ was regarded as an undesirable candidate for supercapacitor applications. The specific capacitance of β-MnO₂ can reach as high as 294 F g⁻¹, which is comparable to the best crystallographic structure, like α-MnO₂. The key is to substantially decrease the size of β-MnO₂ powders to ultra small regime. We demonstrate a facile, simple, and effective approach to synthesizing ultrafine (<10 nm in diameter) β-MnO₂/polypyrrole nanorod composite powders for high-performance supercapacitor electrodes. Our observation may encourage a revisit of the other good …

Characteristics Of The Hydrogen Electrode In High Temperature Steam Electrolysis Process, Chao Jin, Chenghao Yang, Fanglin Chen

Faculty Publications

YSZ-electrolyte supported solid oxide electrolyzer cells (SOECs) using LSM-YSZ oxygen electrode but with three types of hydrogen electrode, Ni–SDC, Ni–YSZ and LSCM–YSZ have been fabricated and characterized under different steam contents in the feeding gas at 850°C. Electrochemical impedance spectra results show that cell resistances increase with the increase in steam concentrations under both open circuit voltage and electrolysis conditions, suggesting that electrolysis reaction becomes more difficult in high steam content. Pt reference electrode was applied to evaluate the contributions of the hydrogen electrode and oxygen electrode in the electrolysis process. Electrochemical impedance spectra and over potential of both electrodes …

Florida Solar Atlas, Florida Solar Energy Center, Charles Cromer

FSEC Energy Research Center®

The direct beam and direct global solar resource values for any geographical location in Florida were found by using actual data taken at the Florida Solar Energy Center (FSEC) for 2010 and correlating those values against clearness values derived from NOAA geostationary satellite data. Using the correlations developed, eleven years of satellite data (2000 - 2010) were used to provide expected monthly average solar resource values for any location in Florida. These values as provided in watts per meter square per day, were matched to colors with the lowest values of the full range of average values representing the deepest …

A Generic Bamboo-Based Carbothermal Method For Preparing Carbide (Sic, B4C, Tic, Tac, Nbc, TiXNb1-XC, And TaX Nb1-XC) Nanowires, Xinyong Tao, Yiping Li, Jun Du, Yang Xia, Yingchao Yang, Hui Huang, Yongping Gan, Wenkui Zhang, Xiaodong Li

Faculty Publications

Finding a general procedure to produce a whole class of materials in a similar way is a desired goal of materials chemistry. In this work, we report a new bamboo-based carbothermal method to prepare nanowires of covalent carbides (SiC and B₄C) and interstitial carbides (TiC, TaC, NbC, Ti_xNb_1−xC, and Ta_xNb_1−xC). The use of natural nanoporous bamboo as both the renewable carbon source and the template for the formation of catalyst particles greatly simplifies the synthesis process. Based on the structural, morphological and elemental analysis, volatileoxides or halides assisted …

Applied Control Strategies At A Cogeneration Plant, Joseph William Burns

Master's Theses

The purpose of this paper is to demonstrate the effectiveness of “classical strategies for dynamic control” on authentic cogeneration processes. These strategies are applied to several processes at the University of Connecticut’s cogeneration plant. Case studies of their applications are presented in this paper. Strategies that are applied include the following:

1) The classical SISO feedback structure

2) The First Order Plus Dead Time (FOPDT) process model

3) The Internal Model Control (IMC) correlations for PI controller tuning

4) Static feed forward with feedback trim

5) Cascade Control

Flow Loop Simulator, John Abruzzini, Manuel Carrasco, Neil Sutherland, Elise Woolworth

Mechanical Engineering

PG&E’s Diablo Canyon Power Plant (DCPP) has requested an operational flow loop simulator to aid in operator/technician training. The flow loop simulator will provide hands-on training that the current plant training process cannot model. This project is a continuation from the 2009-2010 school year. Project scope and design requirements were gathered from the previous group’s design reports as well as meetings with PG&E. The goal of this year’s project team is to verify, enhance and implement the schematic diagram proposed by last year’s team.

The main focus of the flow loop simulator is to provide operators and technicians with …

Solar Powered Oil Well Site, Jonathan Hyland, Matthew Mastro, Kyle Moore

Mechanical Engineering

No abstract provided.

New Construction Builders Challenge: Sealed Attic And High Efficiency Hvac In Central Florida: A Year In Review Monitored Prototypes - Springwater Homes, Florida Solar Energy Center, Carlos Colon

FSEC Energy Research Center®

In 2010 the Florida Solar Energy Center (FSEC), with funding from the Building America program, was involved with a new Builders Challenge builder located in Rockledge, Florida -- Springwater Homes (see figure 1). The newly constructed home in March 2010, features a sealed attic with R-27 roof deck insulation (shown in figure 2). Selection of the HVAC system, an important aspect to achieve high efficiency levels in buildings, ended with one of the highest residential equipment systems available in the U.S., the Nutone IQ Drive (SEER 21). The house was confirmed with a HERS index of 53 using the EnergyGauge …

Analyse Du Comportement Réel Et De L'Optimisation Structurelle Des Cycles De Turbines À Gaz, Alexandru Dobrovicescu, Michel Feidt, Lavinia Grosu, Jim Mcgovern, Georgiana Tirca-Dragomirescu

Conference Papers

L’article présente une étude comparative, basée sur l’analyse exégétique, de l’effet de non prise en considération du comportement réel de l’agent thermique et de l’utilisation des modèles simplifiés pour calculer les performances des cycles de turbines à gaz avec et sans récupération de chaleur. Un intérêt spécial a été réservé au processus de combustion et au transfert de chaleur dans le préchauffeur d’air. La variation des destructions et des pertes d’exergie par rapport à la variation des paramètres fonctionnels est présentée.

Simulation And Validation Of Two-Component Flow In A Void Recirculation System, Oscar Eduardo Daza

Master's Theses

Nuclear power plants rely on the Emergency Core Cooling System (ECCS) to cool down the reactor core in case of an accident. Occasionally, air is entrained into the suction piping of ECCS causing voids that decrease pumping efficiency, and consequently damage the pumps. In an attempt to minimize the amount of voids entering the suction side of the pump in ECCS, a Void Recirculation System (VRS) experiment was conducted for a proof of concept purpose. While many studies have been oriented in studying two-component flow behavior in ECCS, none of them propose a solution to minimize air entrainment. As a …

Some Experiences, Thoughts, Ideas And Open Questions Relating To Applied Thermodynamics, Jim Mcgovern

Articles

In this paper I present some of my thoughts and experiences relating to 'applied thermodynamics' over my career so far. I explain my interest in thermodynamics, describe some topics I have worked on, point out some questions that appear still to be open and outline some ideas for work that could be done. I describe how I was inspired to pursue the area of applied thermodynamics, with reference to a glass, opposed-piston internal combustion engine. I put my heat pump research in the late 1970s briefly into today's context. Some of my research has been in relation to compressors, which …

Arra Advanced Weatherization Training Center - Quarterly Report (January 2011-March 2011), Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The 1st quarter of 2011 was the beginning of procurement for the training center. Two pieces of equipment, the insulation blowing machine and infrared cameras, were put out for quotes. Both have been selected and purchase orders created.

Building America Industrialized Housing Partnership (Baihp Ii) Final Report Budget Periods 1-5, April 1, 2006 - November 30, 2010, Florida Solar Energy Center, Robert Abernethy

FSEC Energy Research Center®

This report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the final budget period (BP5) of our contract, January 1, 2010 to November 30, 2010. Highlights from the four previous budget periods are included for context.

BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work in BP5 was performed in six tasks areas:

• Task 1: Building America System Research Management, Documentation and Technical Support
• Task 2A: Stage G1A: Integrated Solutions for Specific Climate Regions
• Task …

Tower-Tracking Heliostat Array, Joel T. Masters

Master's Theses

This thesis presents a method of tracking and correcting for the swaying of a central receiver tower in concentrated solar production plants.  The method uses a camera with image processing algorithms to detect movement of the center of the tower.  A prototype was constructed utilizing a CMOS camera connected to a microcontroller to control the movements of three surrounding heliostats.  The prototype uses blob-tracking algorithms to detect and correct for movements of a colored model target.  The model was able to detect movements in the tower with average error of 0.32 degrees, and was able to correctly orient the surrounding …

Short-Term Curtailment Of Hvac Loads - Executive Summary, Florida Solar Energy Center, Lixing Gu

FSEC Energy Research Center®

Rapidly increasing requirements placed on utilities to reduce peak loads has led to utility customer incentives to shift peak demand to non-peak times or reduce peak loads when notified by the utility that the grid is close to capacity. This study investigates methods used to reduce building demand during a fixed time window near a utilities on-peak period. The window was chosen to be 5-9 A.M. in winter and 2-5 P.M. in summer. The most common methods for reducing building peak demand were reviewed and categorized by their usefulness and wide-spread availability. These strategies were reductions in lighting power density, …

Arra Advanced Weatherization Training Center - Quarterly Report (September 2010-December 2010), Florida Solar Energy Center, Neil Moyer

FSEC Energy Research Center®

The 4th quarter of 2010 was the initialization of the contract with DOE. During this time period, there were two major events that occurred. First, representatives from UCF-FSEC attended the three day Atlanta Weatherization Training Center Grantee Training Workshop with DOE representatives and the various organizations that were awarded funding. Secondly, the project management plan (PMP) was finalized and submitted to the Project Manager.