Applied Mechanics Commons^™

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

Comparative Analysis Of Impact Attenuation Properties From Soccer Headgear, Kevin G. Mciver, Goutham N. Sankaran, Justin J. Markel, Tom M. Talavage, Larry J. Leverenz, Eric A. Nauman

The Summer Undergraduate Research Fellowship (SURF) Symposium

Athletes suffering from long-term neurocognitive deficiency due to subconcussive impacts is a major concern for football and soccer players today. Football players wear helmets that can help reduce injury risks like skull fractures, and these helmets must meet standard criteria that determinines how well a functional helmet should reduce accelerations of the player’s head. Currently no standard exists for testing soccer headgear despite studies demonstrating soccer players experience similar magnitudes of impacts. In this study, a modal impact hammer was used in conjunction with a Hybrid III 50th percentile test dummy head to simulate impacts experienced by soccer players to …

Development Of Portable Hyperspectral Imaging Device, Chenxi Li, Youngkee Jung, Iyll-Joon Doh, Euiwon Bae

The Summer Undergraduate Research Fellowship (SURF) Symposium

Most of the conventional hyperspectral imaging devices require sophisticated optical components, occupy a large footprint, and requires an initial capital investment for laboratories which mostly suits for laboratories benchtop system. The requirement of shipping the sample and waiting an extended period of time to get the results are the main downsides of this traditional approach. Capitalize in many specific field applications and diagnosis, portable devices provide both convenience and on-site results which are desirable for government agencies and food safety inspectors. This project was aimed to develop a low-cost, portable hyperspectral device for food safety applications. A smartphone was used …

Stability Analysis Of A Flexible Vehicle Model Controlled By Human Pilot Models, Abhishek Ajmani, Anil Bajaj

The Summer Undergraduate Research Fellowship (SURF) Symposium

There is a constant race among automobile manufactures to design safer vehicles while minimizing weight to reduce power consumption. Additionally, organizations like NASA and SpaceX are persistently working toward creating reliable, lightweight rovers to be used on the surface of Mars. However, the lightweight requirement often increases vehicle flexibility, which further develops a tendency toward instability in the lateral (sideways) direction. This investigation develops a mathematical model that represents the dynamics of a flexible vehicle in forward motion, and a heuristic human pilot model is proposed which controls the vehicle. Following such formulation, the combined vehicle and pilot model is …

Study On The Impact Abrasive Wear Of New Super-High Manganese Steel, Wenyan Wang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Numerical And Experimental Characterization Of Material Flow In Forged Aluminum Wheel, Jong-Ning Aoh, Ming-Chiu Li, Chong-Jin Li

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Numerical Modeling And Simulation Of Welding Residual Stresses Using Finite Element Method, Jing Zheng, Ayhan Ince

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Modeling On Tail Pinch In Finishing Rolls During Hot Strip Rolling, Jong-Ning Aoh, Han-Kai Hsu, Ming-Fa Chen

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Simulation On The Sealing Of Aluminum Ball Joint, Haobin Tian, Xiaohang Liu, Xuelei Li, Jun Feng

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Research Of The Metal Flow Picture In The Upsetting Based On Computer And Physical Simulation, Konstantin Nikolaevich Solomonov

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Development Of A Shape Memory Polymer Soft Microgripper, Marshall Tatro, David J. Cappelleri, Wuming Jing

The Summer Undergraduate Research Fellowship (SURF) Symposium

The ability to control microrobots by means of magnetic fields has become of increasing interest to researchers. These robots’ ability to reach places tethered microrobots otherwise could not leads to many possible applications in the body, such as delivering drugs to targeted locations and performing biopsies. This study shows the use of shape memory polymer (SMP) to wirelessly actuate a microgripper to be used by a controllable microrobot to achieve these functions. Many smart materials were analyzed in order to find the material that most effectively would accomplish wirelessly gripping, manipulating, and releasing a microobject. Multiple microgripper designs were designed, …

Simulation, Control And Testing Of Advanced Hydraulic Hybrid Transmissions, Italo M. Ramos, Monika Ivantysynova, Michael Sprengel

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hydraulic hybrids transmissions have the potentially to substantially improve the fuel efficiency of on road vehicles. In fact recent studies have demonstrated that this technology can improve fuel economy by upwards of 30% over competing electric hybrids. To further improve the fuel economy and performance of this technology a novel blended hydraulic hybrid transmission has been constructed at the Maha Fluid Power Research Center. While this novel hybrid architecture created by the Maha lab has many benefits over conventional systems, there are a number of control challenges present due to several discrete modes of operation. And though improving fuel economy …

Efficient Exploration Of Quantified Uncertainty In Granular Crystals, Juan C. Lopez Ramirez, Marcial Gonzalez, Ilias Bilionis, Rohit K. Tripathy

The Summer Undergraduate Research Fellowship (SURF) Symposium

Granular crystals present unique nonlinear properties that support standing waves. These depend on precompression and impurities. Thus, they can be used for different applications such as impact and shock dissipation. There are different models which rely on reasonable approximations and assumptions. While experimental results show good agreement with theory, there are experimental errors that are not easily explained and are usually attributed to the approximations made and phenomena that are not accounted for. This might be the result of not quantifying the uncertainty, since variables like the grain size, position, mass and Young modulus, of each particle, are uncertain. Building …

Microstructure Development Of Granular System During Compaction, Chen Shang, Marcial Gonzalez

The Summer Undergraduate Research Fellowship (SURF) Symposium

Granular materials is the second most manipulated material in the industry today. They are easy to transport and more and more newly developed materials cannot stand the process of traditional casting, like energetic materials and bio-materials, but will survive the powder compaction process. Having a better understanding of the microstructure development of granular systems during compaction process, especially for particles that will heavily deform under loading, will give an insight of how to better process the powders to produce materials with overall better performance comparing to bulk materials. The main theory and mechanism applied are Hertz law and nonlocal contact …

Active Dense Tensegrity Structure: A Novel Concept For Shape Morphing Structures, Zhiwei Wu, Thomas Siegmund

The Summer Undergraduate Research Fellowship (SURF) Symposium

Shape morphing is of relevance for advanced engineering systems such as future aerospace vehicles. Tensegrity structures, a structure comprised of a set of discontinuous compressed struts held together with a continuous web of tensioned cables, can function as the foundation of a shape morphing system (Keith et al, 2007). However, the classic tensegrity structures may not be ideal in all configurations because the space within the structure is not utilized. As an alternative, the present work proposes a dense tensegrity system as an assembly of cables carrying tensions only and polyhedral elements under compression only. An active dense tensegrity can …

Computer Simulation Study Of Slipper Lubrication In Hydraulic Machines, Jordyn B. Miller, Monika Ivantysynova

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hydraulic pumps and motors are vital components used in many applications today. Specifically, the axial piston pump is important because it is reliable, relatively compact, and has a high horsepower-to-weight ratio. These features make this type of pump very advantageous in hydraulic systems. Maintaining proper lubrication between surfaces in an axial pump, such as the slipper and swashplate, is imperative in order to have smooth operation of the system and prevent metal-to-metal contact. The aim of this research is to find the optimal slipper design and fluid film thickness to simultaneously maintain a balanced pressure and decrease power loss in …

Crane Shaking Platform Design, Bixing Yan, Andrea Vacca

The Summer Undergraduate Research Fellowship (SURF) Symposium

Most of the control methodology of Mobile hydraulic crane is not as energy efficient as people think or want, and the desire to innovate novel, energy-efficient control strategy is the target of most hydraulic experts. To develop or test the control method under real road and off-road conditions, a platform that could simulate the movement and vibration of the crane truck is desired. To design and build the multi-operation platform, a design process includes brain storming, design selection, FEA (Fundamental Element Analysis), mechanical sizing, hydraulic sizing and Bill of Material is required and preferred. After going through all the steps …

Linear Controller Establishment For Displacement-Control Pump Switching System, Yangqiao Zheng, Monika Ivantysynova

The Summer Undergraduate Research Fellowship (SURF) Symposium

Displacement Controlled (DC) hydraulics system is booming recently due to its high efficiency and accurate controllability, while the surplus numbers of pumps restrains its further development. DC pump switch technique is a promising application to reduce the number of pumps as well as the cost products to promote DC hydraulics technique. It is necessary to support an innovative DC hydraulic pump switching system with a controller which would allow rapid and accurate estimation and adaptation for all the parameters, like pressures and velocities, in the system. Dynamics and Hydraulics characteristics have initially been investigated for a simplified DC pump switching …