Applied Mechanics Commons^™

Enhancing The Performance Of Conventional Solar Still Using The Nano-Doped Paint (Ndp) Coating, Hagar Alm-Eldin Bastawissi Prof.Dr, Nermin Elgendy Engineer, Ayman R. El-Tohamy

Journal of Engineering Research

Nations are throughout the entire globe continuously confronting the problem of potable water shortage. Recently, it has been thought that using solar energy to desalinate brackish water offers a practical answer to the world's water crises. The output of these stills, is meager, and academics haven't done much to boost it in any way. Solar distillers have been proposed as an efficient method to produce potable water. In recent years, saltwater has produced drinking water by various ways. The efficiency of a solar distiller is significantly influenced by various factors, most important factor of them is the absorber surface. In …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Coconut Shell Waste Treatment Technology For A Sustainable Waste Utilization: A Case Study Of The Smes In Bohol Village, Indonesia, Wahyu Anggo Rizal, Ria Suryani, Roni Maryana, Dwi Joko Prasetyo, Diah Pratiwi, Yuli Ary Ratnawati, Dini Ariani, Andri Suwanto

ASEAN Journal of Community Engagement

This project focused on the introduction of liquid smoke and bio briquette manufacturing technology to small and medium enterprises (SMEs) located in Bohol Village, Gunungkidul, Indonesia through technology transfer, training, and mentoring. These SMEs are engaged in the food business with the main product jenang ketan, a traditional food from Gunungkidul, especially in Rongkop District, and very popular among communities around and outside Gunungkidul. The traditional preparation of jenang ketan produces several by-products in the form of waste, which is dominated by coconut shell biomass. The project’s technology transfer was carried out through the procurement of a series of pyrolysis …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Numerical Simulation Of Nonlinear Vibrations Of Discrete Mass With Harmonic Force Perturbation, M. Yusupov, B. A. Akhmedov, Olga Karpova

Acta of Turin Polytechnic University in Tashkent

The problem of vibration of a single-mass system under the force excitation of vibration associated with a fixed base by a weightless nonlinear viscoelastic spring is considered. To take into account the rheological properties of the spring material, the Boltzmann-Volterra principle was used. Mathematical models of the problem under consideration are obtained, which are described by integro-differential equations. A solution method based on the use of quadrature formulas has been developed and a computer program has been compiled on its basis, the results obtained are presented in the form of graphs. The influence of nonlinear and rheological properties of a …

Analysis Of Dynamic Behaviour Of A Tensioned Carbon Nanotube In Thermal And Pressurized Environments, Ahmed Yinusa, Gbeminiyi Sobamowo

Karbala International Journal of Modern Science

In this paper, the dynamic behaviour of a tensioned single-walled carbon nanotubes (SWCNT) in thermal and pressurized environments is investigated analytically. With the applications of Bernoulli-Euler and thermal elasticity mechanics theories, the governing equation of motion are developed and solved using Laplace and Fourier transforms. The results of the close form solution in this work are in excellent agreements with past results in literature. From the parametric studies, it is established that as the magnitude of the pressure distribution at the surface increases, the deflection associated with the nanotube increases at any mode of vibration. However, a corresponding increase in …

Experimental Investigation Of A New Spiral Wingtip, Naseeb Ahmed Siddiqui, Mohammed Aldheeb, Waqar Asrar, Erwin Sulaeman

International Journal of Aviation, Aeronautics, and Aerospace

Experiments on the relative merits and demerits of slotted wingtips mimicking a bird’s primary feathers have been performed. The real emargination length of feather tips, their flexibility and curved shapes during cruise are considered in the present study. The experiments were performed at a Reynolds number of 3.7 x 10⁵ on a symmetric flat plate half wing of aspect ratio 3. Lift, drag and pitching moments were measured using a six component aerodynamic balance. Four different shapes inspired by bird primary feathers have been analysed. The rigid curved tip performed the best increasing the L/D ratio by 20%. This …

Mathematical Description And Mechanistic Reasoning: A Pathway Toward Stem Integration, Paul J. Weinberg

Journal of Pre-College Engineering Education Research (J-PEER)

Because reasoning about mechanism is critical to disciplined inquiry in science, technology, engineering, and mathematics (STEM) domains, this study focuses on ways to support the development of this form of reasoning. This study attends to how mechanistic reasoning is constituted through mathematical description. This study draws upon Smith’s (2007) characterization of mathematical description of scientific phenomena as ‘‘bootstrapping,’’ where negotiating the relationship between target phenomena and represented relations is fundamental to learning. In addition, the development of mathematical representation presents a viable pathway towards STEM integration. In this study, participants responded to an assessment of mechanistic reasoning while cognitive interviews …

Determination Of Rejected Landing Roll Runway Point-Of-No-Return And Go-Around In Transport Category Airplanes, Nihad E. Daidzic, Ph.D., Sc.D.

International Journal of Aviation, Aeronautics, and Aerospace

The decelerate-accelerate-takeoff maneuver in transport category airplanes has been discussed. Mathematical model based on total energy conservation has been used to calculate the rejected landing point-of-no-return on a runway which will still enable the airplane to safely execute go-around and achieve regulatory screen heights and takeoff safety speeds. After this point has been exceeded or below the point-of-no-return speed no go-around should ever be considered. Landing long and fast and/or decelerating on slippery runways may very well result in an overrun which could be prevented if the go-around is attempted before reaching this critical runway point. The point-of-no-return on the …

A Contribution Toward Better Understanding Of Overbanking Tendency In Fixed-Wing Aircraft, Nihad E. Daidzic

Journal of Aviation Technology and Engineering

The phenomenon of overbanking tendency for a rigid-body, fixed-wing aircraft is investigated. Overbanking tendency is defined as a spontaneous, unbalanced rolling moment that keeps increasing an airplane’s bank angle in steep turns and must be arrested by opposite aileron action. As stated by the Federal Aviation Administration, the overbanking tendency may lead to a loss of control, especially in instrument meteorological conditions. It was found in this study that the speed differential over wing halves in horizontal turns indeed creates a rolling moment that achieves maximum values for bank angles between 45 and 55 degrees. However, this induced rolling moment …

Soil Sampling Made Easier, Mike Bolland, Mike Baker

Journal of the Department of Agriculture, Western Australia, Series 4

A new rotary blade soil sampler has taken the hard work out of collecting soil samples from Western Australia's hard-setting soils to test for soil phosphorus levels .

Conceived and developed by Department of Agriculture technical officer Mike Baker, it should enable soil testing to be more widely adopted. Fortunately, the soil calibration tests that were developed using pogo samples can also be used for the new sampler.

Stubble : Friend And Foe, Department Of Agriculture And Food, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Several articles in this issue of the Journal of Agriculture discuss some of the important issues of stubble management. The articles are condensed from some of the papers presented at a stubble workshop at Geraldton in 1991.

The Development Of An Efficient Lupin Harvesting Front, E D. Blanchard

Journal of the Department of Agriculture, Western Australia, Series 4

Harvest losses represent a significant reduction in lupin production and farm productivity.

Since 1984, the Department's Farm Machinery Research and Liaison Unit at the Dryland Research Institute has studied the lupin harvesting operation to improve its mechanical efficiency. An experimental and a prototype harvesting front were built and tested in the field. Guidlines for efficient lupin harvesting were produced, and commercial modifications developed.

Improved Fertilizing Practices On The Peel-Harvey Catchment, P T. Arkell

Journal of the Department of Agriculture, Western Australia, Series 4

Broad-acre farmers in the Peel-Harvey catchment have met a challange and achieved a great deal since the fertilizer extension programme started in 1983.

The main objective of the extension programme has been to ensure that every year three-quarters of the farmers make economically and technically sound fertilizer decisions, thus causing a minimum amount of phosphorus to enter the waterways of the Peel-Harvey estuarine system.

There's Little To Choose Between Scarifier Points, C R. Lester

Journal of the Department of Agriculture, Western Australia, Series 4

Tests on scarifier points showed that methods of treating them to prolong their life had little effect.

Opposed Disc Plough Furrows Hard Kimberley Soils, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

THE work of reclaiming the eroded areas of the Ord River catchment has posed special problems for field staff of the Department of Agriculture engaged on this large scale project.

Thousands of miles of furrows must be contour-ploughed and seeded in extremely hard ground over big areas of eroded country.

A Practical Guide To Building Contour Banks With A Road Grader, J E. Watson

Journal of the Department of Agriculture, Western Australia, Series 4

THOUSANDS of miles of contour banks have been built in Western Australia, and most of this earthmoving has been done by tractor and disc plough* or by road grader.

This article describes the technique recommended for bank construction with the road grader.

Water Conservation On The Farm, John W. Lewis

Journal of the Department of Agriculture, Western Australia, Series 4

SMALL scale conservation of water for agricultural use is becoming increasingly important throughout Australia.

As land development intensifies, it is natural that farmers turn to more dams and earthen tanks for stock water and irrigation.

Adequate water is essential to supply the carrying capacities made possible by improved pastures, and where greater quantities of water can be stored, fodder crops, pastures, orchards and vegetables can be irrigated.

Automatic Waterers For Day Old Chickens, P Smetana, W. Ward

Journal of the Department of Agriculture, Western Australia, Series 4

ONE of the most tedious and time consuming tasks on a poultry farm is the provision of water to chicks from day old up to the age of three or four weeks.

Most poultry farmers use half-gallon glass fonts with metal bases for the first few weeks, until the chicks are old enough to use the automatic watering system usually situated along one wall of the brooder house.

This cumbersome glass font system can be replaced by the cheap and easily installed automatic watering system described below. This system has already been adopted by several local poultry farmers.

A Useful Farm-Made Roller, V E. Western

Journal of the Department of Agriculture, Western Australia, Series 4

A very serviceable compacting roller can be constructed at little expense by using discarded truck tyres.

The roller described here has an overall width of 5 ft. 3 in. and carries seven 9.00 x 24 semi-trailer tyres which had been discarded when the treads were worn smooth.