Acoustics, Dynamics, and Controls Commons^™

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Design And Parametric Study Of A Mems-Based Reservoir Computer For Reinforcement Learning, Andrew P. Carr

Master's Theses

Single-node reservoir computing (RC) is a hardware-efficient approach to machine learning, leveraging the dynamics of physical systems. In this work, two reinforcement learning algorithms, Q-learning and Proximal Policy Optimization (PPO), are applied to a simulated micro-electro-mechanical system (MEMS)-based reservoir computer to solve both discrete and continuous control tasks. MEMS-based reservoirs are low-power, compact, and their natural frequencies (kHz to MHz) pair well with real-time control loops. To explore the relationship between reservoir dynamics and learning performance, a parametric study is conducted on two reservoir hyperparameters, reservoir size and neuron separation, using CartPole-v1 and MountainCar-v0. The RC successfully learns multiple tasks …

Safe Control Design For Quadruped Locomotion In Unstructured Environments Using Linear Transfer Operators, Sriram Sundar Krishnamoorthy Shankara Narayanan

All Dissertations

Deploying quadruped robots in unstructured, obstacle-rich environments requires control and planning methods that remain safe and reliable despite complex terrain geometry, limited sensing, and inevitable modeling errors. This thesis develops operator-theoretic tools for safe control design of robotic systems using linear transfer operators, with a focus on quadruped locomotion in unstructured environments. The central goal is to develop a unified operator-theoretic framework for safe control design based on the Perron–Frobenius (P–F) and Koopman operators. In particular, the thesis leverages \emph{density functions} to develop safe navigation frameworks in the dual space of densities. In the operator-theoretic perspective, the P–F operator governs …

Conversational Social Robot, Julianna M. Christopoulos, Mackenzie Goldman, Cece E. Hujanen, Jared Hunter

Mechanical Engineering

Background: Social robots are used in various settings to reduce burden on human workers and expand opportunities for people in need of assistance.

Challenge: Design a humanoid robot head and torso capable of holding conversations and interacting with a user using a LLM and motion. Conversations are limited to discussing Cal Poly resources and opportunities with visitors to the Bently Research Center on campus.

Toward Precise Long-Range Underwater Acoustic Geo-Positioning: Utilizing Vehicle Data And Deepening The Gnss Analogy Through Uncertainty Modeling, Isaac B. Salazar

Open Access Master's Theses

Electromagnetic signals, such as those used by Global Navigation Satellite Systems (GNSS), attenuate dramatically underwater, but acoustic signals can travel hundreds of kilometers, and can be used for positioning in much the same way. Concepts from GNSS can be applied to the subsurface context, as at a basic level, the principles of geo-positioning are identical. Key challenges in translating satellite positioning models to the underwater acoustic domain include differences in signal type as well as instrumentation and propagation environment. Acoustic signals travel at much slower speeds and are subject to significant environmental variability due to complex ocean dynamics. Here, the …

End-To-End Autonomous Quadcopter Using Reinforcement Learning, Mohamed Marwan Chawa

Theses and Dissertations

This thesis investigates the potential of Reinforcement Learning (RL) for achieving robust and adaptable quadcopter control, focusing on trajectory and attitude stabilization. We compare state-of-the-art RL algorithms, specifically Proximal Policy Optimization (PPO), against traditional Proportional-Integral-Derivative (PID) controllers across three tasks: hovering, slow trajectory following, and fast trajectory following. To enhance realism, we employ a modified PyFlyt simulation environment with a high-fidelity Crazyflie 2.x model, accounting for motor dynamics, noise, wind disturbances, and aerodynamic drag.

The challenge of operating a quadcopter can be divided into two distinct parts: planning a flight path and actually following that path. Our focus is on …

Computer Vision In A Robotic Arm, Jack Maxwell

College of Engineering Summer Undergraduate Research Program

We used a machine learning-based object detection algorithm to give a robotic arm the ability to "see" with its camera.

Design And Implementation Of An Inverted Short Baseline Acoustic Positioning System, Jakob Frabosilio

Master's Theses

This document details the design, implementation, testing, and analysis of an inverted short baseline acoustic positioning system. The system presented here is an above-water, air-based prototype for an underwater acoustic positioning system; it is designed to determine the position of remotely-operated underwater vehicles (ROVs) and autonomous underwater vehicles (AUVs) in the global frame using a method that does not drift over time.

A ground-truth positioning system is constructed using a stacked hexapod platform actuator, which mimics the motion of an AUV and provides the true position of an ultrasonic microphone array. An ultrasonic transmitter sends a pulse of sound towards …

Convex Approach To Data-Driven Optimal Control With Safety Constraints Using Linear Transfer Operator, Joseph Raphel Moyalan

All Dissertations

This thesis is concerned with the data-driven solution to the optimal control problem with safety constraints for a class of control-affine nonlinear systems. Designing optimal control satisfying safety constraints is a problem of interest in various applications, including robotics, power systems, transportation networks, and manufacturing. This problem is known to be non-convex. One of this thesis's main contributions is providing a convex formulation to this non-convex problem. The second main contribution is providing a data-driven framework for solving the control problem with safety constraints. The linear operator theoretic framework involving Perron-Frobenius and Koopman operators provides the convex formulation and associated …

Summonable Construction Delivery Robot, Kevin M. Lewis

Honors Capstones

In many different construction industries, there is a need for tools, parts, and other necessary items to be transported quickly and efficiently over various types of terrain. Human resources have often been used to address these needs, which can become very time and cost inefficient over long periods. The design proposal here is aimed at addressing this need by developing an autonomous outdoor mobile robot based on a quadrupedal robot design. This approach differs by incorporating a wheeled and quadrupedal hybrid actuation system that provides terrain negotiation and speed at the appropriate times. The team uses Robot Operating System (ROS) …

Deep Reinforcement Learning Of Variable Impedance Control For Object-Picking Tasks, Akshit Lunia

All Theses

The increasing deployment of robots in industries with varying tasks has accelerated the development of various control frameworks, enabling robots to replace humans in repetitive, exhaustive, and hazardous jobs. One critical aspect is the robots' interaction with their environment, particularly in unknown object-picking tasks, which involve intricate object weight estimations and calculations when lifting objects. In this study, a unique control framework is proposed to modulate the force exerted by a manipulator for lifting an unknown object, eliminating the need for feedback from a force/torque sensor. The framework utilizes a variable impedance controller to generate the required force, and an …

Nonlinear Guidance And Control Of Unmanned Aerial Manipulators For Delivering A Payload On A Moving Platform, Ravi Gyawali

Mechanical and Aerospace Engineering Theses - Archive

Unmanned Aerial manipulators (UAMs) are a class of Unmanned Aerial Vehicles (UAVs) equipped with a manipulator. By combining the aerial mobility of a UAV with a manipulator's dexterity, these hybrid systems can perform a wide range of complex tasks while reducing risks and costs. As a result, they are increasingly being utilized for military, industrial, and agricultural applications.

The thesis presents a novel approach for a multi-UAM system to collaboratively deliver a payload on a stationary or maneuvering platform. A sliding-mode-based guidance law, sourced from existing literature, is integrated with a combined control technique for the UAVs and their respective …

On Uncertainty For Ill-Posed Robot Decision Problems, Jared Joseph Beard

Graduate Theses, Dissertations, and Problem Reports (ETD)

As robots adopt more real world responsibilities, they will be expected to solve more complicated problems. In some cases limited prior knowledge will result in unmodelled environmental conditions; in others, multiple users may have competing perspectives on how to frame a decision problem. Many existing frameworks, namely Markov decision processes (MDP) presuppose users have identified a specific problem with models sufficient to solve or learn a problem. If we wish to extend MDPs to novel problems or those heavily dependent on user feedback, autonomous decision makers must be able to identify limitations in how a given problem is framed and …

Trust-Based Variable Impedance Control And Passivity-Based Switched System Analysis For Human-Robot Cooperative Manipulation, Zhanrui Liao

All Dissertations

Human-robot cooperative manipulation (co-manipulation) is one of the most prominent human-robot collaboration (HRC) tasks, where humans and robots manipulate the same object. Trust in HRC is crucial in determining human acceptance of robots and, hence, robot utilization. A probabilistic dynamic Bayesian network (DBN) trust model that integrates a time-series trust model is presented in this thesis. The trust model is learned using a continuous and normalized Baum-Welch (BW) algorithm, devised to account for the continuous nature of trust evolution and the limitations of the classic parameter learning method. To ensure a good HRC in co-manipulation, a variable impedance control framework …

The Potential Of The Implementation Of Offline Robotic Programming Into Automation-Related Pedagogy, Max Rios Carballo, Xavier Brown

Publications and Research

In this study, the offline programming tool RoboDK is used to program industrial robots for the automation sector. The study explores the feasibility of using this non-disruptive robot programming software for classroom use; assesses how well RoboDK can be used to program various robots used in the industry; creates and tests various applications; and pinpoints technical obstacles that prevent a smooth link between offline programming and actual robots. Initial results indicate that RoboDK is an effective tool for deploying its offline programming code to a Universal Robot, UR3e. There are many potential for advanced applications. The goal of the project …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Motion Control Simulation Of A Hexapod Robot, Weishu Zhan

Dartmouth College Master’s Theses

This thesis addresses hexapod robot motion control. Insect morphology and locomotion patterns inform the design of a robotic model, and motion control is achieved via trajectory planning and bio-inspired principles. Additionally, deep learning and multi-agent reinforcement learning are employed to train the robot motion control strategy with leg coordination achieves using a multi-agent deep reinforcement learning framework. The thesis makes the following contributions:

First, research on legged robots is synthesized, with a focus on hexapod robot motion control. Insect anatomy analysis informs the hexagonal robot body and three-joint single robotic leg design, which is assembled using SolidWorks. Different gaits are …

Imitation Learning For Swarm Control Using Variational Inference, Hafeez Olafisayo Jimoh

Graduate Theses, Dissertations, and Problem Reports (ETD)

Swarms are groups of robots that can coordinate, cooperate, and communicate to achieve tasks that may be impossible for a single robot. These systems exhibit complex dynamical behavior, similar to those observed in physics, neuroscience, finance, biology, social and communication networks, etc. For instance, in Biology, schools of fish, swarm of bacteria, colony of termites exhibit flocking behavior to achieve simple and complex tasks. Modeling the dynamics of flocking in animals is challenging as we usually do not have full knowledge of the dynamics of the system and how individual agent interact. The environment of swarms is also very noisy …

Modeling, Control And Estimation Of Reconfigurable Cable Driven Parallel Robots, Adhiti Raman Thothathri

All Dissertations

The motivation for this thesis was to develop a cable-driven parallel robot (CDPR) as part of a two-part robotic device for concrete 3D printing. This research addresses specific research questions in this domain, chiefly, to present advantages offered by the addition of kinematic redundancies to CDPRs. Due to the natural actuation redundancy present in a fully constrained CDPR, the addition of internal mobility offers complex challenges in modeling and control that are not often encountered in literature.

This work presents a systematic analysis of modeling such kinematic redundancies through the application of reciprocal screw theory (RST) and Lie algebra while …

Multi-Robot Symbolic Task And Motion Planning Leveraging Human Trust Models: Theory And Applications, Huanfei Zheng

All Dissertations

Multi-robot systems (MRS) can accomplish more complex tasks with two or more robots and have produced a broad set of applications. The presence of a human operator in an MRS can guarantee the safety of the task performing, but the human operators can be subject to heavier stress and cognitive workload in collaboration with the MRS than the single robot. It is significant for the MRS to have the provable correct task and motion planning solution for a complex task. That can reduce the human workload during supervising the task and improve the reliability of human-MRS collaboration. This dissertation relies …

Cloudbots: Autonomous Atmospheric Explorers, Akash Binoj

Honors Scholar Theses

The CloudBot is an autonomous weather balloon that operates on the principle of variable buoyancy to ascend and descend in the atmosphere. This project aims to develop a device that will collect atmospheric measurements and communicate them mid-flight. The apparatus consists of a helium-filled balloon, the robotic payload, and an air cell. The fixed-volume helium balloon at the top provides an upwards buoyancy force, while the air cell at the bottom can hold a variable amount of pressure to adjust the weight of the CloudBot. By doing so, it is able to travel in storm conditions and collect valuable atmospheric …

Formation Control With Bounded Controls And Collision Avoidance: Theory And Application To Quadrotor Unmanned Air Vehicles, Zachary S. Lippay

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation presents new results on multi-agent formation control and applies the new control algorithms to quadrotor unmanned air vehicles. First, this dissertation presents a formation control algorithm for double-integrator agents, where the formation is time varying and the agents’ controls satisfy a priori bounds (e.g., the controls accommodate actuator saturation). The main analytic results provide sufficient conditions such that all agents converge to the desired time-varying relative positions with one another and the leader, and have a priori bounded controls (if applicable). We also present results from rotorcraft experiments that demonstrate the algorithm with time-varying formations and bounded controls. …

An Experimental Study Towards Underwater Propulsion System Using Structure Borne Traveling Waves, Shreyas Suhas Gadekar

Dissertations, Master's Theses and Master's Reports

The method of generating steady-state structure-borne traveling waves underwater in an infinite media creates abundant opportunities in the field of propulsive applications, and they are gaining attention from several researchers. This experimental study provides a framework for harnessing traveling waves in a 1D beam immersed under quiescent water using two force input methods and providing a motion to an object floating on the surface of the water.

In this study, underwater traveling waves are tailored using structural vibrations at five different frequencies in the range of 10Hz to 300Hz. The resulting fluid motion provides a propulsive thrust that moves a …

Designs And Practical Control Methods For Soft Parallel Robots, Benjamin T. Buzzo

Graduate Theses, Dissertations, and Problem Reports (ETD)

The use of soft robotics is becoming an increasingly researched topic, since they can provide more flexibility in movements and increase safety when working with humans. However, they are more susceptible to modeling and manufacturing errors in the design.

The objective of this thesis is two-fold, the first objective is to determine the benefits and limitations of using calibration tables that rely on the PWM signals instead of modeling as a control method. If calibration tables are not adequate to achieve a high level of precision. The second objective is to determine if using a tethered mobile robot in unison …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Fast Decision-Making Under Time And Resource Constraints, Kyle Gabriel Lassak

Graduate Theses, Dissertations, and Problem Reports (ETD)

Practical decision makers are inherently limited by computational and memory resources as well as the time available in which to make decisions. To cope with these limitations, humans actively seek methods which limit their resource demands by exploiting structure within the environment and exploiting a coupling between their sensing and actuation to form heuristics for fast decision-making. To date, such behavior has not been replicated in artificial agents. This research explores how heuristics may be incorporated into the decision-making process to quickly make high-quality decisions through the analysis of a prominent case study: the outfielder problem. In the outfielder problem, …

Automated And Standardized Tools For Realistic, Generic Musculoskeletal Model Development, Trevor Rees Moon

Graduate Theses, Dissertations, and Problem Reports (ETD)

Human movement is an instinctive yet challenging task that involves complex interactions between the neuromusculoskeletal system and its interaction with the surrounding environment. One key obstacle in the understanding of human locomotion is the availability and validity of experimental data or computational models. Corresponding measurements describing the relationships of the nervous and musculoskeletal systems and their dynamics are highly variable. Likewise, computational models and musculoskeletal models in particular are vitally dependent on these measurements to define model behavior and mechanics. These measurements are often sparse and disparate due to unsystematic data collection containing variable methodologies and reporting conventions. To date, …

Comparison Of Lqr And Lqr-Mrac For Linear Tractor-Trailer Model, Kevin Richard Gasik

Master's Theses

The United States trucking industry is immense. Employing over three million drivers and traveling to every city in the country. Semi-Trucks travel millions of miles each week and encompass roads that civilians travel on. These vehicles should be safe and allow efficient travel for all. Autonomous vehicles have been discussed in controls for many decades. Now fleets of autonomous vehicles are beginning their integration into society. The ability to create an autonomous system requires domain and system specific knowledge. Approaches to implement a fully autonomous vehicle have been developed using different techniques in control systems such as Kalman Filters, Neural …

Analysis And Control Of Fiber-Reinforced Elastomeric Enclosures (Frees), Soheil Habibian

Master’s Theses

While rigid robots are extensively used in various applications, they are limited in the tasks they can perform and can be unsafe in close human-robot interactions. Soft robots on the other hand surpass the capabilities of rigid robots in several ways, such as compatibility with the work environments, degrees of freedom, manufacturing costs, and safe interactions with the environment. This thesis studies the behavior of Fiber-Reinforced Elastomeric Enclosures (FREEs) as a particular type of soft pneumatic actuator that can be used in soft manipulators. A dynamic lumped-parameter model is created to simulate the motion of a single FREE under various …

Immunity-Based Framework For Autonomous Flight In Gps-Challenged Environment, Mohanad Al Nuaimi

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this research, the artificial immune system (AIS) paradigm is used for the development of a conceptual framework for autonomous flight when vehicle position and velocity are not available from direct sources such as the global navigation satellite systems or external landmarks and systems. The AIS is expected to provide corrections of velocity and position estimations that are only based on the outputs of onboard inertial measurement units (IMU). The AIS comprises sets of artificial memory cells that simulate the function of memory T- and B-cells in the biological immune system of vertebrates. The innate immune system uses information about …