Acoustics, Dynamics, and Controls Commons^™

Guitar Amplifier Directivity, Rachel C. Edelman, Brian E. Anderson, Samuel D. Bellows, Timothy W. Leishman

Directivity

No abstract provided.

Spatial Hearing In Simulated Reverberant Classroom Environments, Gabriel Seth Evan Weeldreyer

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Spatial hearing provides access to auditory spatial cues that promote speech perception in noisy listening situations. However, reverberation degrades auditory spatial cues and limits listeners’ ability to utilize these cues for segregating target speech from competing babble. Hence, spatial unmasking—an intelligibility benefit from a spatial separation between a target and masker—is reduced in reverberant environments as compared to free field. This work tests the hypothesis that interaural decorrelation, the result of increasing reverberation, will broaden the perceived auditory source width with a cascading effect of reduced auditory spatial acuity and subsequently poorer spatial unmasking. To understand the perceptual consequences of …

Efficacy Of Passive Ventilation With High Exhaust Demands: A Case Study Of Cal Poly Sst, Siddarth Bokka

Construction Management

The Simpson Strong Tie Demonstration Laboratory serves as a multipurpose space allowing students at the College of Architecture and Environmental Design at California Polytechnic State University to build full scale construction projects. The building features a material storage area, a high bay for construction of full-scale projects, and a mezzanine level that houses digital fabrication equipment. However, the building was never designed to house the specific equipment currently installed on the mezzanine and ventilate the exhaust fumes from them. Rather, the building relies on passive natural ventilation that is likely ineffective at properly exhausting hazardous fumes, resulting in complaints from …

Trumpet Directivity From A Rotating Semicircular Array, Samuel D. Bellows, Joseph E. Avila, Timothy W. Leishman

Directivity

The directivity function of a played musical instrument describes the angular dependence of its acoustic radiation and diffraction about the instrument, musician, and musician’s chair. Directivity influences sound in rehearsal, performance, and recording environments and signals in audio systems. Because high-resolution, spherically comprehensive measurements of played musical instruments have been unavailable in the past, the authors have undertaken research to produce and share such data for studies of musical instruments, simulations of acoustical environments, optimizations of microphone placements, and other applications. The authors acquired the data from repeated chromatic scales produced by a trumpet played at mezzo-forte in an anechoic …

Gamelan Gong Directivity Dataset, Samuel D. Bellows, Dallin T. Harwood, Kent L. Gee, Micah R. Shepherd

Directivity

No abstract provided.

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

New Mathematical Models For Acoustic Insertion Loss Of Fiberglass Lining In Hvac Duct, Michael Anthony Schwob

UNLV Theses, Dissertations, Professional Papers, and Capstones

The design objectives for HVAC air distribution systems are thermal comfort, good indoor air quality, energy efficiency, low construction cost, and appropriate indoor noise levels. The last objective requires that the designer can predict the attenuation of sound transmitted through an air duct. One form of attenuation commonly introduced to an air distribution system to achieve interior noise criteria is fiberglass liner. Past research has been conducted to obtain reliable and accurate insertion loss (IL) data for duct with fiberglass liner. Empirical efforts have relied on limited data sets. Computational efforts have produced numerical models that are not practical for …

Kemar Hats Head Orientation Directivity, Samuel D. Bellows, Timothy W. Leishman

Directivity

This directivity data set for a KEMAR head head-and-torso simulator (HATS) includes head orientations in 14 directions in 5° steps starting from 0° to 40° and then in 10° steps from 40° to 90°. The full spherical measurements followed at an a = 0.97 m radius with the mouth aperture at the spherical center. The sampling density and distribution followed the AES 5° dual-equiangular sampling standard, omitting the south pole (θ = 180°). Thus, each spherical directivity assessment included 36 polar-angle θ samples and 72 azimuthal-angle ϕ samples. The presented data include 22 1/3-octave bands, ranging from 80 Hz …

Leveraging Abet Accreditation To Promote Inclusion Of Noise Control Engineering Concepts In Engineering Programs, Lily M. Wang, Bryan Beamer

Durham School of Architectural Engineering and Construction: Faculty Publications

Accreditation Board for Engineering and Technology, Inc. (ABET) accreditation is an internationally recognized system ensuring consistency and quality in engineering education programs. As a part of ABET accreditation, there is no set requirement for any general engineering program to include noise control engineering concepts in their curricula. However, one of the seven student outcomes that each ABET accredited engineering program must document is their students’ “ability to apply engineering design to produce solutions that meet specified needs with consideration of public health, safety, and welfare…” Controlling noise in the authors’ view is a fundamental strategy for protecting workers from occupational …

Semi Open Partitions: A Defense Strategy For Airborne Disease, Kerrie Marshall, Arik Palileo, Eric A. Schiff

SyracuseCoE

This brief summarizes research on two measures that reduce the risk of transmitting COVID-19 from an infected person to a virus-free individual. Semi-partitioned spaces can reduce airborne disease transmission when combined with a proper ventilation flow pattern in a room. With advanced displacement ventilation risk can be reduced by at least 4 times.

Average Speech Directivity, Samuel D. Bellows, Claire M. Pincock, Jennifer K. Whiting, Timothy W. Leishman

Directivity

Speech directivity describes the angular dependence of acoustic radiation from a talker’s mouth and nostrils and diffraction about his or her body and chair (if seated). It is an essential physical aspect of communication affecting sounds and signals in acoustical environments, audio, and telecommunication systems. Because high-resolution, spherically comprehensive measurements of live, phonetically balanced speech have been unavailable in the past, the authors have undertaken research to produce and share such data for simulations of acoustical environments, optimizations of microphone placements, speech studies, and other applications. The measurements included three male and three female talkers who repeated phonetically balanced passages …

Development Of A Model To Predict The Likelihood Of Complaints Due To Assorted Tone-In-Noise Combinations, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper develops a model to predict if listeners would be likely to complain due to annoyance when exposed to a certain noise signal with a prominent tone, such as those commonly produced by heating, ventilation, and air-conditioning systems. Twenty participants completed digit span tasks while exposed in a controlled lab to noise signals with differing levels of tones, ranging from 125 to 1000 Hz, and overall loudness. After completing the digit span tasks under each noise signal, from which task accuracy and speed of completion were captured, subjects were asked to rate level of annoyance and indicate the likelihood …

Experimental Building Demonstration Model With Viscous Fluid Dampers, Blake Thomas Reeve, Brianna Jean Kufa, Aden Malek Stepanians, Sophie Carmion Ratkovich

Architectural Engineering

The Architectural Engineering major places a heavy emphasis on structural dynamics and the role of wind and seismic loading in building analysis and design. Buildings of high importance that are critical to community function, such as hospitals, often utilize supplemental damping devices like supplemental viscous fluid dampers or base isolators to reduce the overall demands on the structural system. The design and analysis of these dampers are typically not taught at the undergraduate level, and is frequently performed by mechanical engineers, in lieu of structural engineers.

To better understand and research building behavior with supplemental damping devices, our multi-disciplinary team …

Effects Of Noise, Reverberation And Foreign Accent On Native And Non-Native Listeners’ Performance Of English Speech Comprehension, Zhao Ellen Peng, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

A large number of non-native English speakers may be found in American classrooms, both as listeners and talkers. Little is known about how this population comprehends speech in realistic adverse acoustical conditions. A study was conducted to investigate the effects of background noise level (BNL), reverberation time (RT), and talker foreign accent on native and non-native listeners' speech comprehension, while controlling for English language abilities. A total of 115 adult listeners completed comprehension tasks under 15 acoustic conditions: three BNLs (RC-30, RC-40, and RC-50) and five RTs (from 0.4 to 1.2 s). Fifty-six listeners were tested with speech from native …

Design And Optimization Of Membrane-Type Acoustic Metamaterials, Matthew G. Blevins

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

One of the most common problems in noise control is the attenuation of low frequency noise. Typical solutions require barriers with high density and/or thickness. Membrane-type acoustic metamaterials are a novel type of engineered material capable of high low-frequency transmission loss despite their small thickness and light weight. These materials are ideally suited to applications with strict size and weight limitations such as aircraft, automobiles, and buildings. The transmission loss profile can be manipulated by changing the micro-level substructure, stacking multiple unit cells, or by creating multi-celled arrays. To date, analysis has focused primarily on experimental studies in plane-wave tubes …

Room Acoustic Effects On Speech Comprehension Of English-As-Second-Language Talkers And Listeners Versus Native-English-Speaking Talkers And Listeners, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Approximately 21% of the children in the United States school system speak a language other than English at home, but are being taught in English at school. English is additionally being used more and more often as a common language in international settings, even though participants at these international events again are not native English speakers. How do adverse room acoustic environments, including higher background noise levels and longer reverberation times, impact English-as-a-Second-Language (ESL) talkers and listeners versus native English-speaking talkers and listeners? This presentation focuses on two recent studies at the University of Nebraska that investigate how assorted room …

Quantification And Subjective Perception Of Varying Reflection Densities In Measured Room Impulsed Responses, Hyun Hong, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This project focuses on quantifying and testing the subjective perception of reflection densities, or the number of reflections per second, from different room impulse responses. The widely used room acoustic metric, reverberation time, is linked to the perceived reverberation in a room. Two different rooms having the same reverberation time, though, can have different reflection densities in their room impulse responses, and this difference in reflection density may affect how listeners perceive spatial impression in rooms. To investigate how sensitive humans are to a change of reflection density, this paper first reviews assorted parameters for quantifying reflection density from measured …

Vibration Of Steel-Framed Floors Supporting Sensitive Equipment In Hospitals, Research Facilities, And Manufacturing Facilities, Di Liu

Theses and Dissertations--Civil Engineering

Floors have traditionally been designed only for strength and deflection serviceability. As technological advances have been made in medical, scientific and micro-electronics manufacturing, many types of equipment have become sensitive to vibration of the supporting floor. Thus, vibration serviceability has become a routinely evaluated limit state for floors supporting sensitive equipment. Equipment vibration tolerance limits are sometimes expressed as waveform peak acceleration, and are more often expressed as narrowband spectral acceleration, or one-third octave spectral velocity.

Current floor vibration prediction methods, such as those found in the American Institute of Steel Construction Design Guide 11, Floor Vibrations Due to Human …

Assessment Of Noise-Induced Annoyance By Tones In Noise From Building Mechanical Systems, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Prominent tones in noise generated by mechanical equipment in buildings can cause complaints from occupants in buildings. The ISO 1996-2 and ANSI S1.13 standards describe methodologies and metrics to quantify tonality perception, but the influence of tones in noise on human annoyance and performance is not fully understood yet. This paper investigates annoyance responses of humans while exposed to background noise with tonal components. Twenty participants completed digit span tasks while exposed to noise signals with differing levels of tones and overall loudness. Subjects were also asked to rate their annoyance after completing tasks under each noise signal. The subjective …

The Impact Of Building Acoustics On Speech Comprehension And Student Achievement, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

The movement for improved classroom acoustics has primarily been grounded on studies that show how building acoustics (i.e. background noise levels and room reverberation) affect speech intelligibility, as determined by speech recognition tests. What about actual student learning, though? If students do not understand each spoken word in the classroom perfectly, can they still manage to achieve high scholastic success? This presentation will review two recent studies conducted at the University of Nebraska – Lincoln, linking classroom acoustic conditions to student learning outcomes and speech comprehension (rather than simply recognition). In the first, acoustic measurements in two public school districts …

Effects Of Room Acoustics On Comprehension Of Foreign-Accented Speech By Native And Non-Native English-Speaking Listeners, Zhao Peng, Kristin E. Hanna, Brenna N. Boyd, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

In a previous study by the authors, reverberation time (RT) and background noise level (BNL) were both found to have negative effects on native and non-native English-speaking listeners in comprehending English speech produced by native American-English-speaking talkers. Comprehension scores were adjusted for listeners’ baseline English proficiency levels. In the present study, instead of native English-speaking talkers, two native Mandarin Chinese talkers (one male, one female) with similar English spoken proficiency were recruited to produce the same speech materials used in the previous study. A similar methodology was adopted to conduct speech comprehension tests on three groups of listeners: 1) native …

Determining Annoyance Thresholds Of Tones In Noise, Jennifer M. Francis, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Building services equipment often produces noise signatures with significant tones in them that can lead to complaints in the built environment. Previous studies have investigated prominence levels of assorted tonal frequencies, but it is still unclear what prominence of the tones across varying tonal frequencies can lead to human annoyance. This project seeks to apply two different methods towards defining annoyance thresholds of tones in noise at two tonal frequencies: 125 Hz and 500 Hz. In the first, subjects are asked to perform a task, while exposed to ten minutes of a broadband noise spectrum with a specific level of …

Rating Low Levels Of Ambient Noise In Performing Arts Facilities, Lily M. Wang, Brent A. Kraay

Durham School of Architectural Engineering and Construction: Faculty Publications

Previous studies have indicated that common indoor noise rating metrics, such as Noise Criteria NC and Room Criteria RC, do not best correlate to human perceptions of annoyance and distraction in typical office environments. Based on investigations conducted at the University of Nebraska using noise levels between 30 – 60 dBA, the author has proposed that an effective indoor noise rating method should begin with a rating of level (either dBA or sones), then an assessment of spectral quality, tones, and fluctuations. How well would such a system work at very low levels of ambient noise, though, as found in …

Quantifying The Just Noticeable Difference Of Reverberation Time With Band-Limited Noise Centered Around 1000 Hz Using A Transformed Up-Down Adaptive Method, Matthew G. Blevins, Adam T. Buck, Zhao Peng, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This study seeks to quantify the just noticeable difference (JND) of reverberation time (RT) using band-limited noise. ISO 3382-1 lists the JND of reverberation metrics at 5% based on work by Seraphim (1958). However, others have found the JND of RT to be higher from 6% to 39%. Many of these studies utilized band-limited stimuli, e.g. speech, music motifs and bandlimited noise. A previous study by the authors conducted on 30 subjects using white noise demonstrated a JND of RT at 22%. To further verify these results and investigate potential upward frequency masking, the present study was conducted following the …

Effects Of Background Noise Alternating Between Two Levels At Varying Time Intervals On Human Perception And Performance, Andrew Hathaway, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

This research experiment aims to better quantify human perception and performance under increased background noise levels of varying intervals. Twenty-seven participants were tested over five 30 minute sessions where they were subjected to RC-29(H) and RC-47(RV) conditions created by broadband noise fluctuating on different time intervals. These intervals varied from two minutes to ten minutes, simulating the conditions of a noisy HVAC system turning on and off. The performance results of an arithmetic test dealing with short-term memory and a subjective questionnaire will be presented and compared to a similar test using broadband noise bursts and correlated to noise metrics …

Effects Of Reverberation And Noise On Speech Comprehension By Native And Non-Native English-Speaking Listeners, Zhao Peng, Lily M. Wang, Siu Kit Lau, Adam M. Steinbach

Durham School of Architectural Engineering and Construction: Faculty Publications

Previous studies have demonstrated the negative impact of adverse signal-to-noise-ratios on non-native English-speaking listeners' performance on speech recognition using recall tasks, as well as implied that comprehension skills were more impaired than recognition skills under reverberation and noise. The authors have themselves previously conducted a pilot study on three native and three non-native Englishspeaking listeners to examine the effects of reverberation and noise using speech comprehension tasks. Those results suggested that speech comprehension performance is worse under longer reverberation times (RT), and that a longer RT is more detrimental to speech comprehension by non-native listeners than native listeners. This paper …

Architectural Engineering Earthquake Shake Table, Garrett Gudgel, John Whitmer, Brandan Williams

Mechanical Engineering

The Architectural Engineering Department at California Polytechnic State University, San Luis Obispo, owns and operates a single-axis earthquake shake table that previously was only capable of basic wave motion. After implementing a computer based interface to the existing system, Mechanical Engineering student seniors were able to create control algorithms that can take existing or user created acceleration data from earthquakes as well as any user defined position data to be accurately run on the earthquake shake table.

Relationships Between Unoccupied Classroom Acoustical Conditions And Elementary Student Achievement Measured In Eastern Nebraska, Lauren M. Ronsse, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Building standards recommend maximum background noise levels (BNL) and reverberation times (RT) for unoccupied classrooms. However, existing research does not show a consistent correlation between these parameters and student achievement. Through in situ testing, this research seeks to determine what acoustical conditions should be attained in elementary schools for students to meet educational goals. Acoustical measurements were conducted in a Nebraska public school system and correlated to achievement scores from students in the surveyed classrooms. Unoccupied BNLs and RTs were gathered in 34 third and 33 fifth-grade classrooms. Additionally, binaural room impulse response measurements were gathered in a subset of …

Binaural Room Impulse Response Database Acquired From A Variable Acoustics Classroom, Zhao Peng, Siu Kit Lau, Lily M. Wang, Sean Browne, Kenneth P. Roy

Durham School of Architectural Engineering and Construction: Faculty Publications

Room measurements were conducted in a variable acoustics classroom mockup space (epod) at Armstrong World Industries in Lancaster, Pennsylvania, USA. Binaural room impulse responses were measured in the epod using a head and torso simulator. Five reverberation time (RT) scenarios were achieved with various combinations of absorptive wall panels and acoustical ceiling tile. These provided a range of mid-frequency RTs from 0.4 to 1.1 seconds. Three of the five RT scenarios were achieved using two different material configurations to also consider material location effects. For each of the eight material configurations, two student-teacher orientations were tested. One orientation had all …

Effects Of Acoustic Environments On Speech Comprehension By Native-English-Speaking Listeners, Zhao Peng, Lily M. Wang, Siu Kit Lau

Durham School of Architectural Engineering and Construction: Faculty Publications

This study investigates the effects of acoustic conditions on speech comprehension, rather than speech intelligibility as often reported in existing literature. Sets of 15-minute-long listening comprehension tests were developed based on the format of the Test of English for International Communication (TOEIC). Each test set includes four types of tasks: matching aural phrases to photographs, selecting appropriate responses to aural questions, and answering questions after listening to conversations (between two talkers) and talks (single talker). Within the Nebraska acoustics test chamber, native-English-speaking participants are asked to perform these tests under 15 acoustic conditions, from combinations of three background noise levels …