Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1 - 30 of 1712

Full-Text Articles in Mechanical Engineering

Aerodynamic Effects Optimisation Of Water-Powered Funicular Car Body Exposed To Headwind And Crosswind, Theodorus Agung Wicaksono, Bagus Wahyudi, Syamsul Hadi, Wirawan Wirawan, Hangga Wicaksono Sep 2026

Aerodynamic Effects Optimisation Of Water-Powered Funicular Car Body Exposed To Headwind And Crosswind, Theodorus Agung Wicaksono, Bagus Wahyudi, Syamsul Hadi, Wirawan Wirawan, Hangga Wicaksono

Journal of Mechanical Engineering Science and Technology (JMEST)

Water-powered funicular railways are an environmentally friendly mode of transport whose efficiency heavily depends on the principle of gravity. However, their operation is vulnerable to natural wind disturbances that can hinder speed or cause a risk of overturning on steep, curved tracks. This study aims to analyse the influence of funicular car model design on the rolling moment exerted on the rails as the car turns to enter a track branch. The research methodology involves aerodynamic simulations using SolidWorks flow simulation, comparing three body models: WAHYUDI, FUNAERO, and AEROFUN. Simulations were conducted with variations in turn angles (10° to 30°) …

Go to article

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid Sep 2026

Parametric Study On The Plastic Hinge Length Of Precast Concrete Columns With Grouted Sleeve Connections, Rizky Tri Amalia, Harun Alrasyid

Journal of Sustainable Construction Materials and Technologies

The use of precast concrete structures with grouted sleeve (GS) connections has gained significant traction in the acceleration of bridge construction. The plastic hinge length (Lp) is a critical parameter for assessing the seismic performance and deformation capacity of such structural members. The previous study has proposed empirical equations for Lp in monolithic columns; however, a comprehensive understanding of the influential parameters on Lp in precast concrete columns with GS connections remains limited. This study presents a detailed parametric investigation to evaluate the effects of key design parameters on the plastic hinge length of a precast concrete columns with GS …

Go to article

Synthesis Of Fe-Doped Porous Carbon Catalyst Derived From Coconut Shell Waste Using Ferric Nitrate Nonahydrate (Fe(No3)3.9h2o) As An Iron Precursor, Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto Sep 2026

Synthesis Of Fe-Doped Porous Carbon Catalyst Derived From Coconut Shell Waste Using Ferric Nitrate Nonahydrate (Fe(No3)3.9h2o) As An Iron Precursor, Ilham Lestadi Putra, Sukarni Sukarni, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Renewable energy from lignocellulosic biomass is a promising alternative to fossil fuels. Coconut shell (CS) waste is a favorable precursor for porous carbon due to its high carbon content, abundance, and non-food nature. However, conventional biochar often has limited surface area and catalytic active sites, hindering its effectiveness as a catalyst. While Fe-based modifications are promising, the use of ferric nitrate-assisted activation of coconut-shell-derived porous carbon remains underexplored. This research focused on developing an Fe-doped porous carbon catalyst from CS via ultrasound-assisted impregnation, followed by activation in a tube furnace. CS biochar was produced through pyrolysis at 550 °C and …

Go to article

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto Aug 2026

Techno-Economic Analysis Of The Utilization Of Waste-To-Energy In Jakarta Industrial Estate Pulogadung, Wahyu Punjung Pesonagrata, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

Indonesia has a serious waste problem, which ranking second in marine pollution. Due to significant environmental impacts, a solution to overcome the complexity of waste problems is needed. This study took sample on waste management in Jakarta Industrial Estate Pulogadung (JIEP). JIEP is an Industrial area which covers 443 hectares of land in East Jakarta. This study aims to address Indonesia's serious waste problem by exploring the potential utilization of waste in the Jakarta Industrial Estate Pulogadung (JIEP) as Refuse-Derived Fuel (RDF) for a waste-to-energy (WtE) power plant. The proposed method used a steam power plant with RDF as fuel …

Go to article

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo Aug 2026

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biobased lubricants with thermally responsive rheology are increasingly needed for high-efficiency mechanical systems. Graphene nanoplatelet (GnP) nanofluids in vegetable oils are promising candidates, yet their percolation-driven thermo-rheological transitions remain insufficiently understood. In particular, the coupled concentration–temperature landscape controlling network-mediated flow transitions has not previously been established. Here, surfactant-free GnP nanofluids were prepared in high-oleic soybean oil (HOSO) at concentrations of 0.025–2.15% v/v (ϕ), and their rheological response was mapped between 25°C and 80 °C under steady-shear and oscillatory conditions. Below the percolation threshold (ɸ ≤ 0.1% v/v), the nanofluids exhibit near-Newtonian behavior, moderate reversible viscosity enhancement, and classical Arrhenius-type temperature …

Go to article

Additive Manufacturing Of Metals: Mechanical Properties And Their Implications, Sean Chih Aug 2026

Additive Manufacturing Of Metals: Mechanical Properties And Their Implications, Sean Chih

Discovery Day - Daytona Beach

Additive manufacturing of metals is a relatively new and groundbreaking approach to manufacturing high-performance components. However, variability in mechanical properties from the process creates a barrier before this manufacturing technique can be widely applied. Understanding when and where to use this manufacturing is also important to create components with efficiency and without harmful defects. The objective of this research is to evaluate the effects of build orientation, printing parameters, internal defects, thermal history, and residual stresses, post-processing heat treatments, and fatigue behavior on additively manufactured components. Literature-based research is conducted on commonly used metals for additive manufacturing, such as stainless …

Go to article

Influence Of Infill Geometry On The Vibrational Behavior Of 3d-Printed Cantilever Beams, Owen Maute Aug 2026

Influence Of Infill Geometry On The Vibrational Behavior Of 3d-Printed Cantilever Beams, Owen Maute

Discovery Day - Daytona Beach

Vibration and damping are important considerations in many engineering structures, especially as additive manufacturing becomes more widely used in functional mechanical components. This project investigates how the internal structure of 3D-printed parts affects their vibrational behavior. A series of cantilever beams with identical outer dimensions will be designed and manufactured using a 3D printer with PLA filament, since PLA is one of the most commonly used materials in consumer and prototyping-level additive manufacturing. The study will examine five different infill patterns at three different infill densities, producing multiple beam configurations that vary only in their internal geometry. In addition to …

Go to article

Mechanical Vibrations And Damping, Axon Deadrick, Will Standish, Tanay Agarwal Aug 2026

Mechanical Vibrations And Damping, Axon Deadrick, Will Standish, Tanay Agarwal

Discovery Day - Daytona Beach

Mechanical vibrations occur in many engineering systems and can be described using second-order differential equations. In this project, the motion of vibrating systems is studied using the mass–spring model. The focus is on three types of oscillations: free vibrations, dampened vibrations, and forced oscillations. Free vibration describes how a system moves when it is displaced and then released without any external force. Damped vibration includes effects such as friction or resistance that cause the motion to gradually decrease over time. Forced oscillations occur when an external force acts on the system and continuously drives the motion. This project also examines …

Go to article

Thermal Degradation Analysis Of Bagasse Fibers From Sugarcane Waste, Rashmitha Suresh, Faisal Al Nasser Jul 2026

Thermal Degradation Analysis Of Bagasse Fibers From Sugarcane Waste, Rashmitha Suresh, Faisal Al Nasser

Journal of Mechanical Engineering Science and Technology (JMEST)

Sugarcane is one of the important commodities in the industry where bagasse fiber as waste is abundantly available.   Sugarcane bagasse fiber has high cellulose, a key element in the utilization of bagasse. Chemical pretreatment is important to prepare the natural fiber before used as composite reinforcement. The purpose of the study is to analyze the thermal degradation of bagasse fiber after being treated using NaOH and TEMPO solution. The manufacturing method was carried out by a series of washing bagasse with distilled water and NaOH solution, subsequently soaking it in 6% NaOH and 2,2,6,6-tetramethylpiperidine-l-oxyl (TEMPO) solution, and conducted oven-dried. Thermogravimetric …

Go to article

Emergent De Sitter Expansion And Closed Topology From The Cosmic Fabric Model As An Open Thermodynamic System: Resolving The Negative Bulk Modulus Paradox, T G. Tenev, C B. Ward, T F. Tenev, M F. Horstemeyer Jul 2026

Emergent De Sitter Expansion And Closed Topology From The Cosmic Fabric Model As An Open Thermodynamic System: Resolving The Negative Bulk Modulus Paradox, T G. Tenev, C B. Ward, T F. Tenev, M F. Horstemeyer

Faculty Publications and Presentations

The Cosmic Fabric Model establishes a continuum-mechanics isomorphism to General Relativity by representing physical space as an elastic three-dimensional hyperplate embedded in a four-dimensional spatial bulk. Reproducing vacuum kinematics requires a vanishing P-wave modulus, which in turn implies a negative bulk modulus—an apparent thermodynamic instability in a closed system. This paradox is resolved by recasting the framework as an open system: the instability is not pathological but instead drives cosmic expansion. In this interpretation, the observable universe is a lower-energy solid formed through continuous solidification from a higher-dimensional precursor fluid. Using multiplicative kinematics from finite-growth mechanics, the model shows that …

Go to article

Analysis Of Electronic Control Unit Optimization On The Performance Of A 150 Cc Motorcycle Engine Using Ethanol-Blended Fuel, Agus Achmad Syaiful, Annisa Bhikuning, Muhammad Rizal Baihaqi, Muhammad Aulia Rafli Jul 2026

Analysis Of Electronic Control Unit Optimization On The Performance Of A 150 Cc Motorcycle Engine Using Ethanol-Blended Fuel, Agus Achmad Syaiful, Annisa Bhikuning, Muhammad Rizal Baihaqi, Muhammad Aulia Rafli

Journal of Mechanical Engineering Science and Technology (JMEST)

The use of ethanol-blended fuel in a standard vehicle can reduce combustion quality, which has an impact on decreasing vehicle performance. At the above 20% blend level, it affects vehicle performance and requires adjustments to engine settings or the Electronic Control Unit (ECU) before use on conventional engines. This study investigates the effect of aftermarket ECU settings on the performance of a 150 cc motorcycle operating on a gasoline-ethanol blend. Four fuel variations were tested: Pertalite (P100), revvo 90 (R100), and 30% ethanol blends (PE30 and RE30). This study analyzes the effects of optimizing injection duration and ignition timing settings …

Go to article

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika Jul 2026

Chemical Composition Stability Of Cu–Sn And Cu–Zn Journal Bechemical Composition Stability Of Cu–Sn And Cu–Zn Alloys Fabricated By Sand And Permanent Mold Casting With Nickel Alloying, Erwin Erwin, Didik Sugiyanto, Juan Pratama, Trisna Ardi Wiradinata, Abdul Rachmadhan, Muhammad Fikri Andika

Journal of Mechanical Engineering Science and Technology (JMEST)

The processes of moulding and reinforcing chemical elements have a big impact on the balance of chemical composition in copper-based bearing alloys. This has a direct impact on how well the material works. This study examines Cu–Sn alloys produced via sand casting and Cu–Zn alloys fabricated through permanent mould casting, with the incorporation of nickel, which remains uncommon. The objective was to examine the variations in the equilibrium of the chemical composition and the performance potential of the bearing alloy metal when subjected to different casting techniques and nickel concentrations ranging from 0% to 4%. Some of the methods used …

Go to article

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah Jul 2026

Effect Of Concentration And Temperature Of Tio2-Al2o3 Hybrid Nanofluid On The Corrosion Rate Of Aluminum Radiator, Ratna Monasari, Rizky Maulana Ramadhan, Nike Nur Farida, Ahmad Hanif Firdaus, Supa Kusuma Aji, Yuniarto Agus Winoko, Rizkyansyah Alif Hidayatullah

Journal of Mechanical Engineering Science and Technology (JMEST)

Corrosion of aluminum radiators can reduce cooling system reliability and shorten service life in automotive applications. This study examines the effect of TiO2-Al2O3 hybrid nanofluid concentration and temperature on the corrosion rate of commercially available aluminum radiator material. Hybrid nanoparticles with a TiO2-Al2O3 mass ratio of 50:50 were dispersed in distilled water at concentrations of 0.6 wt.%, 0.8 wt.%, and 1.0 wt.%. Corrosion behavior was evaluated using a 14-day accelerated immersion test at 60°C and 80°C, and the corrosion rate was determined using the gravimetric mass loss method. The results …

Go to article

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly Jul 2026

Straw As A Potential Vegetable Fibre Insulative Infill In Framed Constructions - Material Testing\Tnotereftnote1, Patrick Daly

Journal of Sustainable Construction Materials and Technologies

The construction sector faces increasing pressure to reduce embodied carbon and adopt circular material strategies, with bio-based materials offering a promising pathway. Straw-based insulation, particularly in loose-fill form, has gained traction in Europe, where several products have achieved certification under EAD 040138-01-1201. This study investigates the potential of Irish-processed straw chip as a bio-based insulative infill for framed construction by evaluating its material properties and thermal conductivity–density performance relative to European ETA-certified reference products. A programme of laboratory testing was undertaken on commercially available Irish straw samples, including material characterisation (moisture content, particle morphology, and dust content) and thermal conductivity …

Go to article

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa Jul 2026

Development And Characterization Of Mycelium-Based Biocomposites From Ganoderma Lucidum Using Spent Yerba Mate And Residual Sunflower Oil For Sustainable Insulation In Construction, Paula V. Alfieri, Guadalupe Canosa

Journal of Sustainable Construction Materials and Technologies

The construction industry urgently requires sustainable alternatives to petroleum-based insulation materials such as expanded polystyrene (EPS) and mineral wool. Mycelium-based biocomposites offer a promising solution by valorizing agricultural waste while delivering competitive thermal and acoustic performance. In this study, developed and characterized biocomposites using Ganoderma lucidum mycelium combined with spent yerba mate and residual sunflower oil (70 g/30 mL), both commonly generated as waste in Argentine institutions. Two formulations were evaluated: high density (HD: 280 ± 5 kg/m³) and low density (LD: 185 ± 5 kg/m³). Samples were cultivated for 90 days at 28 °C and 65% relative humidity and …

Go to article

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch Jul 2026

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch

Journal of Sustainable Construction Materials and Technologies

This study analyzes the energy and environmental performance of hemp-based wall solutions applied to Moroccan residential buildings by combining dynamic thermal simulation and life cycle assessment (LCA). A reference building is assessed under four representative Moroccan climates (Al Hoceima, Oujda, Marrakech, and Ouarzazate), comparing a conventional wall retrofitted with hemp plaster and a wall incorporating hemp concrete. The results show that hemp concrete significantly reduces annual heating and cooling energy demands by 20–24% depending on the climate, with heating needs decreasing by up to 40% and cooling needs by approximately 15%, particularly in hot and arid regions. The LCA reveals …

Go to article

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek Jul 2026

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek

Journal of Sustainable Construction Materials and Technologies

This study reveals the potential substitution of silica fume and eggshell ash in the technique of soil stabilization, varying across distinct proportions in the modification of geotechnical parameters. The untreated kaolinitic soil which has low soil bearing capacity in nature is frequently reflected in its mechanical instability, for instance, soil settlement and extreme compressibility. By associating the industrial and agricultural material, it is potentially to resolve the above-mentioned issues with explicit designs. A number of laboratory approaches have been implemented in the assessment of basic geotechnical properties, including grain size distribution, Atterberg limits, specific gravity, proctor properties, and shear strength …

Go to article

Numerical Simulation Of Centrifugal Pump Performance Under Impeller Blade And Suction Diameter Variations, Gunawan Budi Santoso, Susanto -, Akhmad Nuriyanis, Anang Budhi Nugroho, Rizka Noor Miftakhul Ulum, Suyono - Jul 2026

Numerical Simulation Of Centrifugal Pump Performance Under Impeller Blade And Suction Diameter Variations, Gunawan Budi Santoso, Susanto -, Akhmad Nuriyanis, Anang Budhi Nugroho, Rizka Noor Miftakhul Ulum, Suyono -

Journal of Mechanical Engineering Science and Technology (JMEST)

The objective of this study is to model variations in pump geometry to obtain optimal performance under the effects of cavitation. The resulting geometric variation models were then simulated using ANSYS Fluent software. The first geometric variation model used a standard 5-blade impeller with suction pipe diameter variations of 2, 2 ½, 2 ¾, 3, 3 ¼, 3 ½, and 4 inches. The second geometric variation model for simulation used a standard 3-inch suction pipe with impeller blade variations of 3, 4, 5, 6, 7, 8, and 9. The simulation results indicated that the number of blades without changes in …

Go to article

Effect Of Naoh Concentration On The Structural, Morphological, And Tensile Properties Of Pineapple Stem Fibers, Ahmad Norca Kurnia Zen, Heru Suryanto, Aminnudin Aminnudin, Fajar Nusantara, Joseph Selvi Binoj Jul 2026

Effect Of Naoh Concentration On The Structural, Morphological, And Tensile Properties Of Pineapple Stem Fibers, Ahmad Norca Kurnia Zen, Heru Suryanto, Aminnudin Aminnudin, Fajar Nusantara, Joseph Selvi Binoj

Journal of Mechanical Engineering Science and Technology (JMEST)

Natural fiber reinforced composites are increasingly being developed due to their environmentally friendly nature, low production costs, and safety for human health. However, the presence of lignin and hemicellulose reduces adhesion properties between fiber and composite matrix. Alkalization treatment is an effective way to remove lignin and hemicellulose attached to cellulose. This study aims to determine the optimum concentration of NaOH used during alkalization process of pineapple stem fiber. The methods included the retting process of fibers from pineapple stems. The obtained fibers were soaked in variations of 2%, 4%, 6%, and 8% NaOH for 4 hours,  then dried and …

Go to article

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju Jul 2026

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju

Journal of Sustainable Construction Materials and Technologies

The rapid accumulation of waste vehicle tires and the increasing demand for cement pose significant environmental challenges through land pollution and CO2 emissions. The combined use of recycled steel fibers (RSFs) recovered from waste tires and supplementary cementitious materials (SCMs) offers a sustainable solution to these issues. This study investigates concrete incorporating 20% fly ash (FA), varying metakaolin (MK) contents (4–16%), and RSF dosages of 0.5–1.5%. Mechanical properties (compressive, split tensile, and flexural strengths) and durability characteristics (sorptivity, water absorption, chloride permeability, and homogeneity) were evaluated at 7, 28, and 90 days. Results showed that the mixture containing 20% FA …

Go to article

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf Jul 2026

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf

Journal of Sustainable Construction Materials and Technologies

This study explores climate-responsive design in domestic architecture, focusing on the application and effectiveness of passive strategies across various climatic regions, including the UK, hot-arid, tropical, and cold climates. A qualitative comparative case study method was used to explore different passive design strategies, integration of sustainability, procurement, the coordination of stakeholders, and compliance with regulations in residential architectural projects under varying climate conditions. Drawing from a combination of historical case studies and original architectural projects, the research evaluates how spatial configuration, material selection, solar orientation, shading, ventilation, and insulation are optimized to achieve thermal comfort and energy efficiency. In temperate …

Go to article

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett Jul 2026

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett

Materials Science and Engineering Faculty Research & Creative Works

The martensitic and magnetic transformations, as well as the mechanical properties, of Ni₂MnAl alloys in as-cast (AC) and heat-treated (HT) conditions were investigated. Magnetic-field-induced strain was evaluated via magnetostriction, with reversible strains of 0.14% and 0.2% achieved in the martensitic phase at 2 K for the AC and HT alloys, respectively. Transformation temperatures and Curie temperatures were determined under constant applied magnetic field, revealing that γ-phase inclusions in the AC microstructure suppress antiferromagnetic domain response, yielding a lower magnetization (∼8.4 emu g⁻¹) compared to the HT alloy (∼13.4 emu g⁻¹). Both alloys exhibited hysteretic behavior in the martensitic state and …

Go to article

Hybrid Solar - Coal Thermal Energy System For Industrial Process Heat At Sayona Drinks Limited In Tanzania, Santos Kihwele, Elisha D. Bitesigirwe Jun 2026

Hybrid Solar - Coal Thermal Energy System For Industrial Process Heat At Sayona Drinks Limited In Tanzania, Santos Kihwele, Elisha D. Bitesigirwe

Tanzania Journal of Engineering and Technology (TJET)

Over the past two decades, global efforts to mitigate pollution from conventional energy sources have intensified, with coal remaining a major contributor to carbon emissions. While fossil fuels cannot be eliminated from thermal generation in manufacturing industries, particularly in middle‑income countries such as Tanzania, they continue to dominate as the primary energy source. Industries including food and beverage, paper, textile, paints, chemicals, and pharmaceuticals require substantial thermal energy for heating and drying, and typically rely on coal and natural gas.This study introduces a unique application of a parabolic trough solar thermal system with integrated thermal energy storage, specifically tailored to …

Go to article

Mae Enewsbrief January-March 2026, Department Of Mechanical And Aerospace Engineering, Michigan Technological University Jun 2026

Mae Enewsbrief January-March 2026, Department Of Mechanical And Aerospace Engineering, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Go to article

Optimizing Graphene Oxide In Self-Compacting Concrete: A Sustainable Nano-Material Strategy For Enhanced Durability And Structural Performance, Mohammed Shakeebulla Khan, Vijaya G. S Jun 2026

Optimizing Graphene Oxide In Self-Compacting Concrete: A Sustainable Nano-Material Strategy For Enhanced Durability And Structural Performance, Mohammed Shakeebulla Khan, Vijaya G. S

Journal of Sustainable Construction Materials and Technologies

In order to reduce the environmental impact of the constructed world, advanced and sustainable construction materials are needed. This work is a summary of the comprehensive study on a novel self-compacting concrete with nano-engineered material (graphene oxide) modified self-compacting concrete (GO-SCC). The optimum dosage of GO was determined using Taguchi method, Analysis of Variance (ANOVA) and Response Surface Methodology (RSM) multi-objective statistical optimization method, and was found to be 0.10% by weight of cement (bwoc). This dosage of 0.10% GO led to the overall desirability score of 0.87, which confirmed that this was the optimum dosage for six response variables …

Go to article

Beneficial Investigation Of Sustainable Recycled Waste Plastic In Treating The Consolidation Behavior Of Fine Soil, Aram Mohammed Raheem, Cumaraswamy Vipulanandan, Mohammed Hiwa Abdullrahman, Ali Tariq Omer Jun 2026

Beneficial Investigation Of Sustainable Recycled Waste Plastic In Treating The Consolidation Behavior Of Fine Soil, Aram Mohammed Raheem, Cumaraswamy Vipulanandan, Mohammed Hiwa Abdullrahman, Ali Tariq Omer

Journal of Sustainable Construction Materials and Technologies

Recycled waste plastic is one of the regular garbage utilized as a sustainable material in soil remediation. This study examines the efficacy of utilizing local recycled waste plastic as an ecological quantifiable along with soil containing fine particles to analyze the consolidation behavior. Various recycled waste plastic contents ranging from 2% to 10% were employed experimentally in two patterns where in the first pattern the recycled waste plastic were mixed as dry material with the fine soil particles while in the second pattern a sandwich layer of 10% of the recycled waste plastic was placed in the middle of the …

Go to article

Enhanced Thermal Energy Storage In Buildings: Impregnation, Leakage, And Environmental Performance Of Organic And Inorganic Pcm Composites, Gökhan Genç, Esra Yılmaz, M. Yusuf Yazıcı Jun 2026

Enhanced Thermal Energy Storage In Buildings: Impregnation, Leakage, And Environmental Performance Of Organic And Inorganic Pcm Composites, Gökhan Genç, Esra Yılmaz, M. Yusuf Yazıcı

Journal of Sustainable Construction Materials and Technologies

This study experimentally investigates the impregnation and leakage performance of various organic (tobacco, sawdust, bay leaf, black cumin) and inorganic (vermiculite, perlite, bentonite, sepiolite) carrier materials used for phase change material (PCM) integration in building applications. The commercial paraffin-based PCM RT-31 was used as the thermal storage medium. Impregnation and leakage tests were conducted to evaluate the PCM absorption capacity, form stability, and energy storage potential of each carrier. The results revealed that perlite (C = 80%) and bay leaf (C = 78%) exhibited the highest impregnation capacities due to their porous and fibrous structures; however, they also demonstrated significant …

Go to article

Modeling Of Tensile Stress-Strain Response For Steel Fiber Reinforced Self-Compacting Concretes, Anıl Niş, Nilufer Özyurt, Turan Özturan Jun 2026

Modeling Of Tensile Stress-Strain Response For Steel Fiber Reinforced Self-Compacting Concretes, Anıl Niş, Nilufer Özyurt, Turan Özturan

Journal of Sustainable Construction Materials and Technologies

Main aim of the research was to further understand self-compacting concrete reinforced with steel fibers (SFR-SCC) behavior and to contribute modeling of the tensile stress-strain diagrams for the standardization of the fiber reinforced materials for structural utilization. Fiber reinforced materials has not been used without structural rebar because of the absence of stress-strain curve in tension required for the structural design codes. Hence, an inverse analysis (multi-layer model) was further modified for various steel fibers to predict tensile stress-strain behaviour. For this purpose, 5 different mixes; control, reinforced with long fibers with 0.5% and 1%, short fiber with 0.5% and …

Go to article

Moisture-Induced Degradation And Mechanical Durability Of Mineral-Filled Polylactide (Pla) Composites, Barbara Szaraniec, Aleksandra Ptaszkowska, Alicja Rapacz-Kmita Jun 2026

Moisture-Induced Degradation And Mechanical Durability Of Mineral-Filled Polylactide (Pla) Composites, Barbara Szaraniec, Aleksandra Ptaszkowska, Alicja Rapacz-Kmita

Journal of Sustainable Construction Materials and Technologies

This study investigates the influence of mineral fillers on the hydrolytic stability and mechanical durability of polylactide (PLA) composites under accelerated aqueous ageing conditions. Composites containing halloysite nanotubes (HNT) and bentonite-based fillers (BM, BS, BSP) at 2 wt.% were prepared using a powder-coating and injection moulding approach. Accelerated hydrolytic degradation was conducted at 50 °C for up to six weeks. The degradation behaviour was evaluated through mass variation, water absorption, incubation medium analysis (pH and electrical conductivity), mechanical testing, surface observations, and contact angle measurements. The results revealed a clear filler-dependent response. Bentonite-filled composites exhibited increased water absorption and accelerated …

Go to article

Applications Of Geosynthetics In Tunnels Construction: A Sustainable Approach To Carbon Footprint Reduction, Ibraheem Rais, Abdullah H. Alsabhan, Md. Rehan Sadique, Shamshad Alam Jun 2026

Applications Of Geosynthetics In Tunnels Construction: A Sustainable Approach To Carbon Footprint Reduction, Ibraheem Rais, Abdullah H. Alsabhan, Md. Rehan Sadique, Shamshad Alam

Journal of Sustainable Construction Materials and Technologies

The use of geosynthetics has transformed tunnelling practices by enhancing structural integrity, durability, and environmental sustainability. This review adopts a systematic literature review design, covering publications from 2000 to 2025 sourced from Scopus, Web of Science, ScienceDirect, and Google Scholar. The selected studies were screened based on relevance, quality, and focus on tunnelling applications, then thematically analyzed into four domains: geosynthetic types, applications, sustainability, and performance evaluation. This review focuses on the applications of various geosynthetics, including geotextiles, geogrids, geocomposites, geocells, and geomembranes, in tunnelling projects. These materials play crucial roles in reinforcing tunnel walls and slopes, improving load distribution, …

Go to article

Next Last