Materials Science and Engineering Commons^™

The Effects Of Silica On The Properties Of Vitreous Enamels, Signo Tadeu Dos Reis, Mike Koenigstein, Liang Fan, Genda Chen, Luka Pavic, Andrea Mogus-Milankovic

Materials Science and Engineering Faculty Research & Creative Works

Ground coat enamels for low carbon steel that contain silica as a mill addition have been developed to study the changes of their properties. Acid-resistant commercial enamel where silica addition was varied from 0 to 10.0 wt % was used for this investigation. The effects of the addition on the corrosion resistance, thermal properties, electrical properties, and mechanical adherence of the enamel to low carbon steel were studied. The corrosion resistance of the steel enameled coupons was tested using a salt spray (fog) apparatus for time periods reaching 168 h at room temperature. It was found that, although the density …

Magnetic Field Assisted Milli-Scale Robotic Assembly Machine: An Approach To Massively Parallel Swarm Robotic Automation Systems, Yan Liu

Dissertations

The vision of highly parallel, automated manufacturing systems that can build macroscopic products by heterogeneous assembly of many small devices will have a major impact in manufacturing. In this study, a novel milli-scale robotic assembly machine with parallel capabilities, assisted with programmable magnetic field, is developed. The machine prototype consists of a 16x16 array of electromagnets. The dimensions of the electromagnets are 5mm high with an inner diameter of 1.1mm and outer diameter of 2.5mm. All the electromagnets are driven by a 16x16 array of H-Bridges, and an Arduino microcontroller is used to control and program the arrays.

Using the …

Development Of Flexible Nickel-Zinc And Nickel-Iron Batteries, Xianyang Meng

Dissertations

The fabrication of flexible nickel-zinc batteries using a facile mixing of electroactive components for electrode preparation is presented. Polytetrafluoroethylene (PTFE) is found to be an effective binder by reducing concentration polarization, providing chemical/physical stability and enhancing flexibility. The zinc electrode containing PTFE maintains its original porous morphology even after hundreds of cycles while polymers such as PEO show morphology change. Each component, as well as the assembled flexible cells show desired flexibility and stability even under bending conditions.

The fabrication of flexible nickel-iron batteries using printable composite electrodes embedded with multiwalled carbon nanotubes (CNT) is also presented. All the metal …

Effects Of Substrate Radial-Position Relative To The Sputter-Gun Axis On The Electrical, Optical And Structural Properties Of Zno Thin Films Deposited By Reactive Direct Current Magnetron Sputtering, John Paul Eneku, Tom Otiti, Julius Mwakondo Mwabora, David Horwat

Tanzania Journal of Science

ZnO thin films were deposited using reactive direct current (dc) magnetron sputtering on glass substrates placed at seven variable radial positions (-1, 0, 1, 2, 3, 4 and 5 cm)  relative to the sputter-gun (target) axis. A pure zinc target was used and sputtering carried out in argon and oxygen atmosphere with flow rates of 50 sccm and 6 sccm, respectively. XRD characterization showed that, all films crystallized homogeneously in the wurtzite phase with a strong (002) and a weak (004) orientations. Film crystallinity was very low at substrate positions located less than or equal to 1 cm from the …

Compositional And Thickness Effects On The Optical Properties Of Zinc–Doped Selenium–Antimony Thin Films, Austine A Mulama, Julius M Mwabora, Andrew O Oduor, Cosmas M Muiva

Tanzania Journal of Science

Chalcogenide system of antimony (Sb)-selenium (Se)-zinc (Zn) system is a promising semiconductor for phase change memory devices due to its thermal stability and low power consumption. The study investigated the effect of film thickness and zinc content on the optical properties of thermally evaporated Sb10Se90-xZnx (x = 0, 5, 10 & 15 at. %) thin films. It was found that transmittance (T~ 85-40%) and optical band gap energy (Eopt ~ 1.60 eV – 1.22 eV) decreased but absorption coefficient (α~0.840–2.031 104 cm–1) increased with increase in zinc content. Furthermore, as the film thickness increased from 53 ± 5 nm to …

Analysis Of 3d Printed Ndfeb Polymer Bonded And Organic Based Magnets, Chimaobi Ibeh

Theses

Additive manufacturing (AM), or commonly known as 3D printing, has introduced to the manufacturing and commercial sectors novel ways of reducing production times, decreasing material waste, and enabling end products with multi-material configuration and complex geometric designs. From industrial scale to customer-based printers, AM has revolutionized the approach to manufacturing, prototyping, and designing in the field of medical, automotive, aerospace, biomedical, electronics and customizable products. Recently, additive manufacturing has crossed over to the area of applications in magnetism due to the economic push for the miniaturization of electronic and mechanical devices, reduction in production costs and material & design flexibility. …

Optimization Of Zinc To Tin Ratio In A Sol Gel Precursor Solution On The Growth And Properties Of Annealed Czts Thin Films, Justine John Tibaijuka, Margaret E Samiji, Nuru R Mlyuka

Tanzania Journal of Science

CZTS thin films were deposited by sol–gel spin coating method using precursor solutions prepared by dissolving copper acetate dihydrate, zinc acetate dihydrate, tin chloride and thiourea in methanol and monoethylamine then annealed in RTP furnace at 500 °C. Sol–gel precursor solutions were prepared with different Zn/Sn in a precursor solution and were annealed at different time intervals; and their effects on the optical and electrical properties of CZTS (Cu2ZnSnS4) films were investigated. The optical band-gap values were estimated to be between 1.30 and 1.88 eV while the absorption coefficients were in the range of 104 cm–1 in the visible region. …

Effects Of Aluminium And Tungsten Co-Doping On The Optical Properties Of Vo2 Based Thin Films, Cephas J Lyobha, Nuru R Mlyuka, Margaret E Samiji

Tanzania Journal of Science

Aluminium and tungsten co-doped vanadium dioxide (VO2:W:Al) thin films were deposited by DC reactive magnetron sputtering technique. In this work we report on the effects of aluminium and tungsten co–doping on the optical properties of vanadium dioxide (VO2) based thin films with a view of combining both increased luminous transmittance (Tlum) and lowered transition temperature (τc). The effect of aluminium and tungsten co-doping on semiconductor-metal transition of vanadium dioxide films was investigated and compared with tungsten doped and undopedVO2films. Spectral transmittances of the films were obtained using Shimadzu SolidSpec-3700 DUV UV-VIS-NIR spectrophotometer. The results revealed that the transmittance of tungsten …

Hall Effect Parameters Of Aluminium And Tungsten Co-Doped Vo2 Thin Films, Mohamed Mussa, Nuru R Mlyuka, Margaret E Samiji

Tanzania Journal of Science

The Hall Effect parameters of Al and W co-doped VO2 thin films were studied in order to explain the effect of co-doping on the electrical properties of thermochromic VO2 films. The carrier concentrations and conductivity of the films were found to increase with increase in temperature while carrier mobility decreased reaching a minimum around the transition temperature then slightly rose and became stable at high temperatures. Tungsten doped films displayed higher carrier concentrations and conductivity on both sides of the metal insulator transition and lower mobility compared to undoped and Al and W co-doped VO2 thin films.

Transient Transmission Oscillations In Doped And Undoped Lithium Niobate Induced By Near-Infrared Femtosecond Pulses, Bryan J. Crossman, Gregory J. Taft

Physics Faculty Publications

Transient transmission oscillations in X-cut and Z-cut congruent, iron-doped, and magnesium-doped lithium niobate samples were measured using 50 fs, 800 nm, 0.5 nJ pulses from a self-mode-locked Ti:sapphire laser in an optical pump–probe system. Several Raman-active oscillation modes excited by these pulses were observed as changes in the transmitted probe intensity versus time delay between the pump and probe pulses. The samples were rotated to determine how the incident polarization of the pump pulses affects the mode excitations. The observed Raman-active oscillations correspond to previously reported symmetry modes measured with traditional, continuous-wave, Raman spectroscopy using the same scattering …

Research Progress In Hydrogen Evolution Low Noble/Non-Precious Metal Catalysts Of Water Electrolysis, Yang Li, Zhao-Yan Luo, Jun-Jie Ge, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

Hydrogen energy technology with hydrogen as an energy carrier is gaining more and more attention due to its cleanliness and high energy density. Hydrogen fuel cell vehicles have been listed as one of the ultimate energy technologies in the 21st century. Among them, sustainable hydrogen production technology is a necessary prerequisite for the future development of hydrogen energy economy. Electrolyzed water technology driven by renewable resources represents an important way to support the sustainable development of hydrogen energy economy. The development and utilization of high activity, low cost hydrogen evolution catalysts is a key factor in improving the efficiency and …

Fuel Cell Performance Curve After Mea Optimization Structural Optimization Of Low Pt Membrane Electrode Assembly, Yan Rao, Shang Li, Fen Zhou, Tian Tian, Qing Zhong, Zhao-Hui Wan, Jin-Ting Tan, Mu Pan

Journal of Electrochemistry

Membrane electrode assemblies (MEAs) are the key component of proton exchange membrane fuel cell. For a long time, much attention has been paid to develop MEA technology. At present, the research, development and industrialization of fuel cell has entered a new era. More strict requirements for MEA, especially for the reduction of Pt loading with a challenging target of 0.125 mg·W^-1 have to be met. In this paper, the performance losses under low Pt loading are analyzed in terms of activation polarization, ohm polarization and mass-transfer polarization. It is proposed that research should be focused on the activity of …

Progress Of Self-Humidifying Membrane Electrode Assembly For Low Temperature Proton Exchange Membrane Fuel Cell, Bin Chi, Yue-Kun Ye, Shi-Jie Jiang, Shi-Jun Liao

Journal of Electrochemistry

The self/non-humidification membrane electrode assembly(SH-MEA)is an important pathway towards the self- humidification fuel cell and plays a crucial role for the large scale commercialization of low temperature proton exchange membrane fuel cell (LT-PEMFC), because it not only can reduce the volume and complexity of fuel cell system, resulting in the decrease of the cost, but also can improve the output power density of the fuel cell system. Currently, the researches on the self-humidifying MEA of LT-PEMFC mainly focus on three aspects: the preparation of self-humidification proton exchange membrane, the construction of self-humidification catalyst layer, and the construction of composite self-humidifying …

Fe-N Doped Hollow Carbon Nanospheres Linked By Carbon Nanotubes For Oxygen Reduction Reaction, Ya-Lin Zhang, Chi Chen, Liang-Liang Zou, Zhi-Qing Zou, Hui Yang

Journal of Electrochemistry

The development of non-precious metal catalysts for oxygen reduction reaction (ORR) is essential for large-scale application of proton exchange membrane fuel cells. Herein, we present the in situ formed Fe-N doped hollow carbon nanospheres linked by carbon nanotubes composite, synthesized by using ZIF-8 as sacrificed template to form polydopamine (PDA) hollow nanospheres, followed by complexing with FeCl₃, high temperature heat-treatment and NH₃-etching. ZIF-8 was gradually decomposed simultaneously with PDA coating due to the loss of Zn²⁺ grabbed by PDA. NH3 etching resulted in the improved surface area, while the reducibility of NH₃ resulted in …

Palladium Adatoms On Gold Nanoparticles As Electrocatalysts For Ethanol Electro-Oxidation In Alkaline Solutions, Hui-Mei Chen, Shang-Qian Zhu, Jia-Le Huang, Min-Hua Shao

Journal of Electrochemistry

Palladium (Pd) is a good catalyst for ethanol electro-oxidation in alkaline solutions. The activity of Pd is further improved in this study by modifying the gold (Au) nanoparticles with Pd adatoms using a simple spontaneous deposition process. The Pd overlayer on the Au core (Au@Pd) is un-uniform with some Au atoms exposed to the electrolyte. The activity of Au@Pd/C toward ethanol oxidation reaction (EOR) is much higher than that of Pd/C in an alkaline solution. The peak current density of Au@Pd/C is 4.6 times higher than that of Pd/C with a 100 mV lower onset potential. The enhanced activity may …

Recent Progress In Pt-Based Catalysts For Oxygen Reduction Reaction, Jing Li, Xin Feng, Zi-Dong Wei

Journal of Electrochemistry

One major challenge for a large-scale commercialization of the proton-exchange membrane fuel cells (PEMFCs) technologies that enable a shift to ‘zero-emission’ personal transportation, is the expensive and unstable Pt catalysts, which are mainly used to catalyze the sluggish kinetics of the oxygen reduction reaction (ORR) occurred on the air electrode of PEMFCs. Many research works have targets to improve the stability of Pt-based catalysts and to construct Pt/transitional metal alloys with low Pt loading amount. Herein, we provide a minireview for the Pt-based ORR catalysts based on our recent work, which covers a brief background introduction, the stability improvement of …

Fuel Cells Reactor For Chemicals And Electric Energy Cogeneration, Zhi-Lin Heng, Xiao-Zi Yuan, Yi-Mei Yin, Zi-Feng Ma

Journal of Electrochemistry

As an energy conversion device, fuel cells can efficiently convert chemical energy into electrical energy. With the developing of technology, it is used as a reactor to conduct the synthesis of high value-added chemicals while generating electrical energy. Having benefits such as mild reaction conditions, controllability of the reaction process, high selectivity of the product, as well as high efficiency of energy utilization, it is widely used in many fields such as preparation of high value-added industrial products, gas separation, water treatment, etc. This paper introduces the current trends and statuses of fuel cell reactors in the cogeneration of chemicals …

Durability Performance Of The High-Power Fuel Cell System, Ke-Yong Wang, Wei-Yu Shi, Ren-Fang Wang, Jia Liu, Zhong-Jun Hou

Journal of Electrochemistry

Fuel cell durability is the crucial challenge in fuel cell vehicle, and the lifetime of more than 5000 hours is believed to be necessary for vehicle application. Few works on durability test of the full fuel cell system have been reported. In this work, the long lifetime HySYS-30 fuel cell system was developed in Sunrise Power based on the improved MEA durability and system control strategy. The durability performance of the system was investigated under vehicle duty cycle for more than 6000 hours, and only 8.1% performance loss was observed, implying that the durability of HySYS-30 fuel cell system could …

A Review Of Proton Exchange Membrane Fuel Cell Catalyst Layer By Electrospinning, Yong Liu, Han Ding, De-Chun Si, Jie Peng, Jian-Bo Zhang

Journal of Electrochemistry

The limitation of catalyst layer for proton exchange membrane fuel cell (PEMFC) in cost, durability and performance constitutes the bottleneck for the commercialization of fuel cell vehicles. Electrospun catalyst layer, with high catalyst utilization, increased triple phase boundary (TPB) and triple phase channel (TPC), has been developed by many researchers. This paper reviews the research progress in the electrospun catalyst layer for PEMFC, combined with the author’s work. Firstly, the development progress of catalyst layer is summarized, and the catalyst layer is classified and analyzed based on its fabrication method and structure character. Next, the fabrication process, physical property characterization, …

Stabilization Strategies Of Pt Catalysts Forproton Exchange Membrane Fuel Cells, Da-Ping He, Shi-Chun Mu

Journal of Electrochemistry

The low service lifetime of proton exchange membrane fuel cells (PEMFCs) is the main bottleneck for their commercial applications. One of the main factors is that the expensive metal Pt catalyst is easy to degradation under the harsh working environment of PEMFC (such as variable voltage, strong acidity, gas-liquid two-phase flow), which leads to the inevitable decay of the catalytic performance, thus, seriously restricting the lifetime of PEMFC. Therefore, the electrochemical stability of Pt-based electrocatalysts has become an important and hot topic to improve the PEMFC lifetime. In this paper, we review the recent development in enhancing the stability of …

The Pilot Application Of Electrochemical Impedance Spectroscopy On Dynamic Proton Exchange Membrane Fuel Cell, Jian-Wei Guo, Jian-Long Wang

Journal of Electrochemistry

By analyzing Electrochemical Impedance Spectroscopy (EIS) in applications of dynamic proton exchange membrane fuel cell (PEMFC), bottlenecks which restrict EIS tool development have been pointed out in this paper. Though the high-frequency resistance in EIS is largely accepted as cell inner-resistance, this can only be applied for cell with low current. The low-frequency resistance is difficult to be realized due to its relation with mass transfer. Furthermore, the improved Randles equivalent circuits are built up preliminarily, thus, penetrating into studies for mass transfer reaction, cell operation/degeneration, and high temperature fuel cell. Inspiringly, EIS is becoming an analyzing tool for stack …

Morphological Control Of Ptcu2 Octahedron And Oxygen Reduction Electrocatalytic Performance Of Ptcu For Fuel Cell, Long-Sheng Cao, Lei Wan, Zhi-Gang Shao, Hong-Mei Yu, Ming Hou, Bao-Lian Yi

Journal of Electrochemistry

Platinum acetylacetonate (Pt(acac)₂) and copper acetylacetonate (Cu(acac)₂) were co-reduced to prepare PtCu₂ octahedron alloy catalyst in N,N-dimethylformamiade by solvothermal method. The PtCu₂ showed lattice compression, and high ratio of non-oxidized Pt with high electronic binding energy. All those structural features contributed to weak adsorption strength of oxygen species on Pt and lower d-band centre position. The influence of structure-directing agent on morphology of PtCu alloy was systematically studied. In the half cell test, as a result of the uniform morphology and regular octahedron of PtCu₂ formed, the mass activity and area specific activity …

Effects Of So2 In Air On Performance Of Direct Methanol Fuel Cell, Bin Qin, Fen-Ning Jing, Xue-Jing Sun, Gong-Quan Sun, Hai Sun

Journal of Electrochemistry

Direct methanol fuel cells (DMFC) generally use oxygen as an oxidant. Contaminants such as sulfides and nitrides in the air can affect the performance of the DMFC. In this work, the effects of SO₂ on the performance of DMFC were investigated and the mechanism of poisoning was analyzed, by means of constant current discharge curve, polarization performance curve, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In the CV scan, the permeated methanol was oxidized at a low potential to eliminate its effect on the SO₂ poisoning behavior test. The results showed that the SO₂ poisoning resulted …

Facile Synthesis Of Pt-Cu Alloy Nanodendrites As High-Performance Electrocatalysts For Oxygen Reduction Reaction, Liu-Xuan Luo, Guang-Hua Wei, Shui-Yun Shen, Feng-Juan Zhu, Chang-Chun Ke, Xiao-Hui Yan, Jun-Liang Zhang

Journal of Electrochemistry

Structures and compositions have significant effects on the catalytic properties of nanomaterials. Herein, a facile etching-based method was employed to synthesize Pt-Cu nanodendrites (NDs) with uniform and homogeneous alloy structures for enhancing oxygen reduction reaction (ORR). The formation of dendritic morphology was ascribed to the etching effect caused by the oxidative etchants of the Br^-/O₂ pair. The atomic ratio of Pt/Cu in Pt-Cu NDs could be easily tuned by altering the ratio of the Pt/Cu precursors, without deteriorating the dendritic morphology. The most active carbon-supported Pt₁Cu₁ NDs (Pt₁Cu₁ NDs/C) exhibited the …

Acid Treated Carbon As Anodic Electrocatalysts Toward Direct Ascorbic Acid Alkaline Membrane Fuel Cells, He-Mu Chen, Chen-Xi Qiu, Yuan-Yuan Cong, Hui-Yuan Liu, Zi-Hui Zhai, Yu-Jiang Song

Journal of Electrochemistry

In order to improve the hydrophilicity and electrocatalytic activity, commercial carbon black (BP 2000) was subjected to acid treatment to obtain acid-treated carbon (ATC). The generation of rich oxygen-containing groups on the surface of the ATC was proved by X-ray photoelectron spectra (XPS), Fourier transform-infra red spectra (FTIR), thermogravimetric analysis (TG) and contact angle measurement. UV-vis spectra were firstly recorded to calculate activation energy (Ea) of ascorbic acid (AA) chemical oxidation in alkaline conditions by oxygen in air and the Ea value was determined to be 37.1 kJ·mol^-1. Additionally, electrochemical impedance spectra (EIS) were used to evaluate unprecedented …

Pd/C Catalysts For Co2 Electroreduction To Co:Pd Loading Effect, Dun-Feng Gao, Cheng-Cheng Yan, Guo-Xiong Wang, Xin-He Bao

Journal of Electrochemistry

Nanostructured heterogeneous catalysts have been widely used in the electrochemical carbon dioxide (CO₂) reduction reaction (CO₂RR), which can simultaneously achieve the electrocatalytic conversion of CO₂ to fuels and the storage of renewable energy sources. Carbon supported palladium nanoparticles (Pd/C) catalysts have been previously reported to show excellent CO₂RR performance. However, the crucial role of the metal loading in supported electrocatalysts has been rarely reported. In this work, we study the Pd loading effect on the structure of Pd/C catalysts as well as their activity and selectivity of CO₂RR to CO. The …

Caging Porous Co-N-C Nanocomposites In 3d Graphene As Active And Aggregation-Resistant Electrocatalyst For Oxygen Reduction Reaction, Lu-Yang Xiu, Meng-Zhou Yu, Peng-Ju Yang, Zhi-Yu Wang, Jie-Shan Qiu

Journal of Electrochemistry

Oxygen reduction reaction (ORR) is the cornerstone reaction of many renewable energy technologies such as fuel cells and rechargeable metal-air batteries. The Pt-based electrocatalysts exhibit the highest activity toward ORR, but their large implementation is greatly prohibiting by unaffordable cost and inferior durability. During electrode manufacturing and electrochemical reaction, severe aggregation of catalyst nanoparticles induced by size effect further limits the operational performance of electrocatalysts. We report a new strategy for fabrication of active and aggregation-resistant ORR electrocatalyst by caging metal-organic frameworks derived Co-N-C nanocomposites in permeable and porous 3D graphene cages via sprayed drying the mixed colloids of ZIF-67 …

Lightweight Thermal Management Material For Enhancement Of Through-Thickness Thermal Conductivity, Matthew Collins Weisenberger

Center for Applied Energy Research Faculty Patents

A flexible sheet of aligned carbon nanotubes includes an array of aligned nanotubes held in a polymer matrix material. The carbon nanotubes have an average length of between about 50 microns and about 500 microns. The polymer matrix has an average thickness of between about 10 microns and about 500 microns. The flexible sheet has a density of about 0.2 to about 1.0 glee and includes between about 98 to about 60 weight percent aligned carbon nanotubes and between about 2 and about 40 weight percent polymer. A tape of aligned carbon nanotubes, a method for producing a tape of …

Determination Of Chemical Speciation Of Arsenic And Selenium In High-As Coal Combustion Ash By X-Ray Photoelectron Spectroscopy: Examples From A Kentucky Stoker Ash, Biao Fu, James C. Hower, Shifeng Dai, Sarah M. Mardon, Guijian Liu

Center for Applied Energy Research Faculty and Staff Publications

Knowledge of the chemical speciation of arsenic and selenium in coal fly ash is essential in the evaluation of the environmental behavior of fly ash disposed in a landfill in a natural environment. In this study, a series of high-As coal fly ash from stoker boilers were collected to determine the chemical forms of arsenic and selenium. The ash surface chemical characteristics and the speciation of arsenic and selenium were characterized by X-ray photoelectron spectroscopy and X-ray-induced Auger electron spectroscopy. The results indicate that the surface enrichment ratio for selenium (63.3–309.5) is higher than that of arsenic (1.2–21.2). The Wagner …

Electroless Nickel Plating And Spark Plasma Sintering Of Nano Zro2 For Mechanical Property Enhancement, Kunlong Jia

McKelvey School of Engineering Graduate Student Theses & Dissertations

A new approach of combined electroless nickel plating (ENP) and spark plasma sintering (SPS) was used to determine the feasibility of fracture toughness improvement of ZrO2. Nano-grained yttria stabilized zirconia (YSZ) particles of 100nm average diameter were coated with about 1-5 nm of nickel coating by ENP. To reduce nano particle agglomeration throughout the ENP process; vigorous agitation with an ultrasonic horn was used. The coated powder was characterized using Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX) and Transmission electron microscopy (TEM) to study the microstructure and coating characteristics. The coating was identified to be predominantly nickel and of …