Materials Science and Engineering Commons^™

Recovery And Evaluation Of A Germanium Infrared Camera, Michael Paszek

Graduate Theses and Dissertations

Short-wave infrared imagers made of germanium are a promising way to extend silicon-compatible imaging beyond the visible spectrum. They also use mature CMOS fabrication and readout electronics. This thesis details the recovery, initialization, and evaluation of a germanium focal plane array (FPA) infrared camera system using both a sealed TriWave camera and a modular prototype platform. Functionality was restored to this legacy hardware, and repeatable testing workflows were established for evaluating packaged infrared imagers under controlled indoor and outdoor conditions. The prototype used a custom software interface named Merlott for evaluation, and it followed a standard sequence that included checking …

Study On The Effects Of Molecular Layer Deposition Coating And Mechanical Pressure On Lithium Metal Anodes, Cameron Mondl

Graduate Theses and Dissertations

Lithium (Li) metal is a highly promising anode material for next-generation energy storage systems due to its outstanding theoretical capacity and low electrochemical potential. However, its commercialization implementation has been hindered due to interfacial instability and uncontrollable dendrite formation, leading to poor cycling efficiency and thermal runaway. Among the most promising stabilization strategies, protective interfacial coatings have emerged as an effective solution to promote more uniform Li deposition and suppress erratic morphological inconsistencies. In particular, molecular layer deposition (MLD) enables uniform film thickness through layer-by-layer deposits, offering a highly versatile approach to protective interfacial layers. In addition to interfacial engineering, …

Optical Characterization Of Ge And Gesn Grown In Aspect Ratio Trapping Structures For Enhanced Emitter Performance, Abdulla Said Ali

Graduate Theses and Dissertations

Silicon (Si) began dominating the electronics industry since 1960s, the dominance came due to its affordability and well developed fabrication processes. But when it comes to light emitting devices and photonics devices in general, the indirect bandgap of Si has caused many scientists to search for alternative semiconductor materials that can deliver better light emission, materials that can also improve wavelengths detection which is also very limited when it comes to Si, reduce losses and greater light amplification, all this while still being affordable. Despite these limitations, Si has been widely used in Complementary Metal Oxide Semiconductor (CMOS) manufacturing and …

Automation And Upgrading Of Custom Cold Wall Uhv-Cvd Reactor For Group Iv Material Development, Alexander Golden

Graduate Theses and Dissertations

Group IV alloys have shown promising results for infrared optoelectronic applications where III-V materials are currently dominant. The III-V material system has vacancies that Group IV materials can fill, most importantly complementary metal oxide semiconductor (CMOS) process compatibility making quality devices much cheaper and widely available compared to the current state of the art. Silicon, being an indirect band gap Group IV material, has poor performance in optoelectronic applications but is the dominant material for most of the electronic industry. However, when silicon is alloyed or substituted with other group IV materials, these optoelectronic properties can be enhanced and, in …

Controlling Electroless Deposition On Polymer Interfaces Towards Discrete Functional Particle Synthesis, Grecia Pierina Alvarado Munoz

Graduate Theses and Dissertations

Electroless deposition is a process that facilitates the formation of metal layers on surfaces through the reduction of metal ions onto a surface in the presence of a sacrificial reducing agent. This process can be applied to synthesize conductive metal layers on insulators such as glass or polymers. The kinetics of heterogeneous deposition depend on the interfacial surface chemistry, including the presence of added catalyst materials, as well as the bulk chemical environment, such as the concentration of metal ions and sacrificial reductants. Furthermore, the homogeneous formation of metal nanoparticles may compete with the deposition reaction, adversely affecting the control …

Polymer-Enhanced Nanopore Sensing, Eugene Gyasi Agyemang

Graduate Theses and Dissertations

The resistive pulse technique characterizes single analytes by detecting fluctuations in the ion current as they pass through a narrow orifice connecting two electrolyte-filled chambers, each containing a single electrode. The amplitude, shape, frequency, and duration of these fluctuations primarily provide information about the analyte’s size, shape, concentration, and net surface charge, respectively. One configuration for resistive pulse measurements is of an electrolyte-filled nanopipette immersed in a bath, where the nanopipette tip acts as the nanoscale orifice. It was previously shown that incorporating the large quantities polymer polyethylene glycol (PEG 8K, 50% w/v) into the external electrolyte bath dramatically enhanced …

Synthesis, Structural Characterization And Optical Studies Of Silver-Indium-(Zinc)-Chalcogenide Fluorescent Quantum Dots, Sujal Acharya

Graduate Theses and Dissertations

Developing a non-toxic, high-performance fluorescent nanomaterial is crucial for overcoming the environmental and health restrictions of current cadmium, and lead based quantum dots (QDs), which limit the application of quantum dots in optoelectronics and bioimaging. In this thesis, we synthesized environmentally friendly AgInS2 QDs by a colloidal method, systematically altering the In/Ag precursor ratio from 2 to 6 to study the impact on their optical and photophysical properties. Our goals were to find the optimal stoichiometry for maximum quantum efficiency and stability. We also investigated further improving optical and photophysical properties through shelling with ZnS. The emission spectra appeared broad, …

Flexible Microelectrode-Based Impedance Immunosensor For Rapid Detection Of E. Coli O157:H7, Sonatan Kumar Biswas

Graduate Theses and Dissertations

Abstract Food contamination poses a significant threat to public health, the economy, and human health worldwide, occurring at any stage of the food supply chain, from farm to fork. Escherichia coli 0157:H7, recognized as one of the principal causes of foodborne illness, poses a considerable risk to food safety. The primary objective of this investigation is to devise a flexible microelectrode-based immunosensor capable of swiftly identifying E. coli O157:H7 cells without the need for incubation in a pure culture environment. In the development of the biosensor, the gold electrode (composed of 50% Au) underwent an initial coating process involving 2-aminoethanethiol/cysteamine, …

Modeling, Synthesis, And Experimental Characterization Of Rhenium Disulfide For Optoelectronic Devices, Solomon Opeyami Ojo

Graduate Theses and Dissertations

Two-dimensional (2D) transition metal dichalcogenides (TMDs) have garnered considerable interest for their potential in optoelectronics and photonics owing to their remarkable combination of electronic, optical, and mechanical properties. These characteristics distinguish them from other 2D materials, including graphene, making them particularly valuable for next-generation technologies. This dissertation focuses on ReS_₂, a 2D TMD with a unique anisotropic 1T distorted crystal structure. The research aims to elucidate its fundamental properties through a combination of theoretical modeling, material synthesis, and experimental characterization techniques, with the goal of optimizing ReS_₂ for device applications. A theoretical investigation utilizing Density Functional Theory …

Ohmic Contacts For Fabrication Of Sic Cmos Devices, Anthony Di Mauro

Graduate Theses and Dissertations

Today’s world of electronics is dominated by semiconductor devices which utilize silicon as their substrate material. Though, silicon is not ideal for semiconductor devices in high-voltage or high-temperature applications. Additionally, the efficiency of silicon devices becomes drastically reduced in nonideal operating conditions. Therefore, finding alternatives to silicon?based devices has been a topic for decades now. A few great candidates to replace silicon devices for said applications include Silicon Carbide (SiC), Gallium Nitride (GaN), and Aluminum Arsenide (AlAs). SiC has grown its reputation as the best candidate, when compared to other potential alternatives, due to its wide bandgap, high operating frequency, …

Investigating Functionalized Cvd Graphene Heterostructures As Platforms For Hydrogen Gas Sensing, Evans Asiedu Addo-Mensah

Graduate Theses and Dissertations

The hydrogen economy is rapidly advancing and is poised to become one of the world's largest economies, driven by the abundance of hydrogen gas. Several organizations, particularly in the United States of America, are closely or have been monitoring this development, with rapidly increasing interest. Considering that hydrogen gas has no taste, smell (odor), or color, and very combustible, it’s imperative to develop detectors and sensors capable of rapidly detecting leaks to prevent application disasters. Owing to its extraordinary mechanical and electrical characteristics, graphene is the material that has been studied the most. When combined with hexagonal boron nitride (hBN), …

Computational Alchemy: Pioneering Spintronic, Thermoelectric, And Optoelectronic Materials Design Through First-Principles Calculations And Machine Learning, Eesha Sanjay Andharia

Graduate Theses and Dissertations

Intelligent materials discovery and design plays a pivotal role in advancement of spintronics, optoelectronics and thermoelectric devices and technology. In this study, we investigate three types of materials using first principles calculations. First, the structural, electronic, and magnetic properties of CrTiCoZ (Z = Al, Si) equiatomic quaternary Heusler alloys were investigated. CrTiCoAl compound was found to exhibit a half metallic ferromagnetic structure and Curie temperature above room temperature, which makes it an ideal candidate for magnetic tunnel junction, the basic building block of Spintronic devices. Second, we use Green’s function to obtain the finite temperature phonons by including quartic anharmonicity …

Molecular Beam Epitaxy Of Gesn On Iii-V Substrates For Photonic Applications, Calbi Gunder

Graduate Theses and Dissertations

This dissertation explores the advancement of germanium-tin (GeSn) as a tuneable narrow bandgap material, crucial for the development of high-efficiency photodetectors and laser devices in near- and mid-infrared technologies. We investigate the synthesis challenges, particularly the lattice mismatch between GeSn alloys and substrates, which significantly affects their crystalline and optical qualities. Through molecular beam epitaxy, we examine the growth of Ge and GeSn on GaAs (001) substrates, employing Ge/GaAs and Ge/AlAs buffer layers to investigate these challenges. Our findings, characterized by X-ray diffraction, atomic force microscopy, reflection high-energy electron diffraction, and photoluminescence, demonstrate the production of high-quality Ge layers, achieving …

Development Of Iii-V And Iv Epitaxy On Sapphire Technology, Emmanuel Wangila

Graduate Theses and Dissertations

This research presents comprehensive insights into the epitaxial growth of germanium (Ge) on c-plane sapphire substrates using molecular beam epitaxy (MBE). The direct growth of Ge on sapphire typically yields three-dimensional (3D) Ge islands with diverse growth directions, multiple primary domains, and twinned crystals. However, incorporating a thin AlAs nucleation layer proves instrumental in enhancing surface and material quality. With a 10 nm AlAs layer, the achieved surface exhibits improved characteristics, including a smoother surface, single epitaxial orientation, sharper rocking curve, and a single domain. This study surpasses previous works by achieving a single primary domain and reducing twinning. Furthermore, …

Micro-Mechanical Characterization Of Uhpc Stiffness Mechanisms: Towards A Better Understanding Of Concrete Elastic Modulus, Charissa N. Puttbach

Graduate Theses and Dissertations

Current design code equations for estimating the elastic modulus of specialty concretes like ultra-high performance concrete are not all suitable. Developing empirical curves from exhaustive experimental testing is challenging for concretes that may have high levels of cement replacement with mineral admixtures and fibers at varying volume contents. As such, an alternative approach is taken that seeks to understand the constituent microscale stiffness mechanisms and relate the results to the macroscale. Micropillars are fabricated on several cement paste phases using a focused ion beam. A modified pico-indenter is used to determine the linear and non-linear behavior under micro-compression loading. Micropillar …

Synthesis Of Bimetallic Nickel And Cobalt Phosphide Nanostructures For Electrocatalysis, Sarah Meixin York

Graduate Theses and Dissertations

Transition metal phosphides have become a new class of materials to be considered as promising catalysts for a number of applications including electrochemical hydrogen evolution (HER). Electrocatalysis in hydrogen evolution is a heavily studied field due to the increasing desire to develop more efficient and more cost-effective catalysts for clean hydrogen production. This project develops a chemical approach to synthesizing bimetallic cobalt-nickel phosphide nanostructures for their use in HER. The synthesis is accomplished by thermal decomposition of the metal precursors in the presence of carbon monoxide (CO) and trioctyl phosphine (TOP). The resulting nanostructures were characterized using transition electron microscopy …

3d Printed Microdialysis-Based Microsampling Probes, Patrick Pysz

Graduate Theses and Dissertations

This work will show the development of a fully 3D printed device platform in which a complex microsampling probe geometry is fabricated in a simple two-step process. This process includes the combination of 2-photon polymerization (2PP) and masked-stereolithography (MSLA). The cutting edge neurotechnology needed to monitor brain internal communication and will require multiple sensing modalities including temperature, pressure, electrophysiological, and optogenetics. Microsampling is an integrally important function for any future biosensing device platform as it allows for chemical delivery and unparalleled specificity through offline analysis of collection samples. Stereolithography (SLA) 3D printing has emerged as a powerful fabrication method capable …

The Growth And Characterization Of Inn Quantum Dots Using Droplets Epitaxy In Mbe, Malak Refaei

Graduate Theses and Dissertations

III-nitride semiconductor material systems offer great potential for next-generation optoelectronic devices due to their direct bandgaps, which vary from 0.7 eV (InN) to 3.5 eV (GaN) to 6.2 eV (AlN), as well as their other unique properties. InN has gained much less attention than GaN and AlN within this family of semiconductors due to its complicated low-temperature growth. However, the prediction that an InN quantum well on GaN can become a two-dimensional (2D) topological insulator has resulted in expanding the research interest in InN. At the same time, this renewed interest has begun to reveal that the formation of an …

Understanding And Tuning Magnetism In Van Der Waals Magnetic Compounds, Rabindra Basnet

Graduate Theses and Dissertations

The recently discovered two-dimensional (2D) magnetism has attracted intensive attention due to possible magnetic phenomenon arising from 2D magnetism and their promising potential for spintronics applications. The advances in 2D magnetism have motivated the study of layered magnetic materials, and further enhanced our ability to tune their magnetic properties. Among various layered magnets, tunable magnetism has been widely investigated in metal thiophosphates MPX3. It is a class of magnetic van der Waals (vdW) materials with antiferromagnetic ordering persisting down to atomically thin limit. Their magnetism originates from the localized moments due to 3d electrons in transition metal ions. So, their …

Hierarchical Structure And Material Integration For Electrocatalytic Co2 Reduction, Hamed Mehrabi

Graduate Theses and Dissertations

CO2 released by the combustion of fossil fuels is driving significant changes to the earth’sclimate. The natural cycle for removing CO2 from the atmosphere, namely photosynthesis, cannot keep up with the rate at which it is being added. Developing engineering approaches to remove CO2 from the atmosphere is becoming essential to reduce these effects. Removal leads to further issues of carbon sequestration and favorable CO2 reuse strategies, including the electrochemical transformation of recovered CO2 to useful products such as fuels and materials. Copper is an important electrocatalyst for the CO2 reduction reaction (CO2RR) because of its unique capability for producing …

A Study On Interactions Between Metal-Organic Frameworks And Biological Materials, Josh Phipps

Graduate Theses and Dissertations

Metal-organic frameworks or MOFs are an extremely useful tool in many areas of applications. Their popularity in recent years has arisen from their high efficiency in catalytic chemical reactions. This is made possible due to their porous interior and the ability of the MOFs components to be functionalized. These same traits make MOFs excellent for use in protein encapsulation or immobilization and have the potential to become excellent drug carriers. Their development in this utilization has been limited dramatically compared to MOFs chemical applications. This is due in part to the nature of biological processes taking longer to study, but …

Initial Exploration Of Reduced Gyrations For Arkansas Asphalt Mix Designs, Jocie L. Baker

Graduate Theses and Dissertations

The most common distresses in asphalt pavement are cracking and rutting. These distresses plague almost every asphalt roadway in the world. Finding ways to mitigate these distresses will improve the performance of asphalt pavements. One way to combat the premature cracking of asphalt in the field is to ensure there is enough asphalt binder within the mix. This will help the flexibility of the asphalt undergoing large loads and deformation. However, it is widely accepted that mix designs across the country lack the appropriate amount of asphalt binder in their mixes, causing dry mix designs that are subject to cracking …

Fabrication And Non-Covalent Functionalization And Characterization Of Graphene-Based Devices On Novel Substrate Cadmium Trithiophosphate (Iv) — Cdps, Abayomi Omotola Omolewu

Graduate Theses and Dissertations

With graphene at the center of several application areas such as sensing, circuits, high-frequency devices for communication systems, etc., it is crucial to understand how the intrinsic properties of devices made from graphene and other materials like platinum and palladium nanoparticles affect the performance of such devices for the specific application area. Many graphene-based devices for different application areas have focused mainly on the material composition of the graphene-based devices and how it affects performance parameters for the specific application. However, it would be insightful to understand how the intrinsic electrical properties of the graphene devices for different applications affect …

Hierarchically Structured Photoelectrodes Via Atomic Layer Deposition, Justin Rowan Reed Demoulpied

Graduate Theses and Dissertations

In the search for a sustainable method to meet increasing energy needs, solar energy emerges as an underutilized, plentiful resource. Solar intermittency and requirements for transportation necessitate storing solar energy in the form of chemical bonds via artificial photosynthesis. Photoelectrochemical (PEC) water splitting generates hydrogen fuel from solar energy and water. A semiconducting material that successfully meets the complex requirements for building an industrially scalable PEC device has yet to emerge. This is leading to a reevaluation of materials previously overlooked within PEC research, mainly materials with limitations such as minimal charge carrier mobility and propensity to corrosion under illumination …

Xps And Ipe Determination Of Band Offsets Of Germanium Based Materials, Justin Michael Rudie

Graduate Theses and Dissertations

Germanium tin and silicon germanium tin are group IV semiconductor alloys that have gained significant interest in recent years for their potential use in optoelectrical devices. While silicon and germanium are indirect bandgap materials on their own, alloying them with tin in sufficient quantities leads to a transition to direct bandgap alloys. Direct gap performance opens the door for efficient light emitting and detecting devices fabricated entirely on group IV materials that are compatible with the industry standard CMOS manufacturing techniques. Germanium tin and silicon germanium tin have bandgaps that respond to light in the mid to near infrared spectrum …

Etching Process Development For Sic Cmos, Weston Reed Renfrow

Graduate Theses and Dissertations

Silicon Carbide (SiC) is an exciting material that is growing in popularity for having qualities that make it a helpful semiconductor in extreme environments where silicon devices fail. The development of a SiC CMOS is in its infancy. There are many improvements that need to be made to develop this technology further. Photolithography is the most significant bottleneck in the etching process; it was studied and improved upon. Etching SiC can be a challenge with its reinforced crystal structure. Chlorine-based inductively coupled plasma (ICP) etching of intrinsic SiC and doped SiC, SiO2, and Silicon has been studied. A baseline chlorine …

Study Of Single-Photon Wave-Packets With Atomically Thin Nonlinear Mirrors, Christopher Klenke

Graduate Theses and Dissertations

A novel controlled phase gate for photonic quantum computing is proposed by exploiting the powerful nonlinear optical responses of atomically thin transition metal dichalcogenides (TMDs) and it is shown that such a gate could elicit a π-rad phase shift in the outgoing electric field only in the case of two incident photons and no other cases. Firstly, the motivation for such a gate is developed and then the implementation of monolayer TMDs is presented as a solution to previous realization challenges. The single-mode case of incident photons upon a TMD is derived and is then used to constrain the more …

Study Of Thin Gan/Ingan/Gan Double Graded Structures For Future Photovoltaic Application, Mirsaeid Sarollahi

Graduate Theses and Dissertations

Indium gallium nitride (In_x Ga_(1-x) N) materials have displayed great potential for photovoltaic and optoelectronic devices due to their optical and electrical properties. Properties such as direct bandgap, strong bandgap absorption, thermal stability and high radiation resistance qualify them as great materials for photovoltaic devices. The tunable bandgap which absorbs the whole solar spectrum is the most significant feature which became attractive for scientists. The bandgap for these materials varies from 0.7 eV for InN to 3.4 eV for GaN covering from infrared to ultraviolet. In_x Ga_(1-x) N wurtzite crystal is grown on GaN buffer layer by Molecular Beam Epitaxy …

Design, Fabrication, And Characterization Of An Array Of Graphene Based Variable Capacitors, Millicent Nkirote Gikunda

Graduate Theses and Dissertations

Since it was first isolated and characterized in 2004, graphene has shown the potential for a technological revolution. This is due to its amazing physical properties such as high electrical conductivity, high thermal conductivity, and extreme flexibility. Freestanding graphene membranes naturally possesses an intrinsic rippled structure, and these ripples are in constant random motion even room temperatures. Occasionally, the ripples undergo spontaneous buckling (change of curvature from concave to convex and vice versa) and the potential energy associated with this is a double well potential. This movement of graphene is a potential source of vibrational energy.

In this dissertation, we …

Diffusive Dynamics Of Biological Macromolecules In The Cytoplasm Of Live Bacteria, Asmaa Sadoon

Graduate Theses and Dissertations

Bacteria are small organisms that play important roles in our bodies and in maintaining our surrounding environment. However, bacterial infections are considered as one of the health diseases that threatens the lives of humans. Resistance of bacteria to antibiotics has made treating bacterial infections more challenging. With the emergence of many developed optical techniques, it has become possible to study various biological mechanisms of molecules inside these small organisms with high resolution and precise localization. In this research, single particle tracking photoactivation localization microscopy (sptPALM) technique was used to investigate the dynamics of fluorescent histonelike nucleoid-structuring proteins (H-NS) in live …