Geological Engineering Commons^™

Identification Of Intrusive Massifs In The Nurata Mineralized Zones Based On Satellite Images, Samariddin Rabbimkulov, Abdulla Almordonov, Akmal Asadov, Abdimutal Tangirov

Technical science and innovation

The article presents the results of processing space images using PCA, ISODATA, K-Means and similar methods, as well as analysis based on GIS technologies. As a result of automatic and visual interpretation of the obtained images, intrusive complexes, linear and ring structures scattered throughout the Nurata region were identified. In particular, the result obtained by X-ray diffraction analysis proved that the composition of the 2R4G1B and 2R4G3B channels is one of the most effective methods for separating the intrusive massifs distributed in the region. Given that isolated intrusive massifs, linear and ring structures are directly related to gold mining zones …

Current State And Ways Of Increasing The Efficiency Of Technologies For Isolating Water Influxes, A Karshiev, R Suleimanova, K Akhmedova, M Rakhmonkulov

Technical science and innovation

The results of the application of the technology of isolation of water inflows in the wells of the fields of the Mubarek Oil and Gas Production Department are presented. The efficiency is assessed and the problems of the applied technologies for isolation of water inflows are shown. The technical and economic efficiency of the technology for isolating water inflows in wells with collapse of the columns is shown. The flow rates of wells in the fields of the Mubarek oil and gas production department are decreasing due to an increase in the water cut of the produced product. At the …

Development Of Available Mud Stabilizers Based On Local Material, S Gaibnazarov

Technical science and innovation

The article discusses some issues of creating new affordable and cheap stabilizer-reagents for drilling fluids based on local and secondary resources. It has been established that in the process of drilling, in order to prevent rock falls, the mud should not decrease, but, if possible, increase the cohesion forces in the rocks. In order to maintain the stability of the wellbore, to prevent outbursts of formation fluids and losses, the mud must have, first of all, the required density. Stabilizing reagents are primarily designed to reduce filtration and viscosity of the drilling fluid. It has been established that in each …

The History Of The Tectonic Development Of The South-Eastern Part Of The Turan Plate And The Beshkent-Kashkadarya Foothill Depression Of The Modern Tien Shan, Azamjon Zakirov, Ravshan Zakirov, Irmuxamat Khalismatov, Zakirova Feruzaxon, Borshov Victor

Technical science and innovation

The article examines the history of the tectonic development of the southeastern part of the Turan Plate and the Beshkent-Kashkadarya foothill depression, which have been studied and discussed by many researchers. The history of the tectonic development of the research area is relatively complete since the Pre-Jurassic deposits. The pre-Jurassic deposits on the territory of the Amu Darya syneclise are confined mainly to the Khiva and Zaunguz grabens, delimited by the Central Amu Darya ridge.

At the end of the Oligocene, tectonic activity increased sharply within the Turanian Plate, which included the research area. It flowed more intensively both from …

Methods Of Improving Complex Cleaning Of Sand Plugs In Khodjaobad Underground Gas Wells, Abdulaziz Murodov, Muhriddin Muydinov, Saidaziz Khabibullaev, Aziz Abidov

Technical science and innovation

The purpose of the study is to develop recommendations for improving the methods of cleaning complex sand plugs in wells of underground gas storage. To organize the correct and efficient use of underground gas storage, the bottom of wells must be kept clean. The article develops recommendations on the use of optimal methods for cleaning wells from complex sand jams on the example of Khujabad UGS. In addition, recommendations were developed for the operation of production wells in the horizons of the XX-XXI-XXII underground gas storage of Khujabad

Study Of The Thermodynamic Properties Absorbation Sulfur Storage Gas Of Zinc And Copper Industry, Berdiyarov Tilovkabulovich Berdiyarov Dr., Sh. T. Khojiev, S. T. Matkarimov, Sh. Munosibov

Technical science and innovation

The article considers the problems of utilization of industrial gases formed in the production of copper and ore containing sulfur anhydrides. Currently, the composition of process gases entering the gas purification department is approximately 6-7% SO₂, 0.2-0.3% SO₃ and other gases, until sulfuric acid is obtained from these gases, the sulfate is treated in a counter-scheme with 8% sulfate acid. The aim is to first reduce the temperature of the exhaust gases and second to avoid flying components such as as As, F, Se. As a result of the studies, the amount of SO₂ in the …

Combined Devices Of Facts Technology, Bahrom Ravshanovich Normuratov Associate Lecturer, Misrikhan Misrikhanov, Shukhrat Khamidov

Technical science and innovation

FACTS - Flexible Alternative Current Transmission System technology is a family of devices, each of which can be used individually and in concert with other devices to control the interrelated parameters of the electrical power system. The mission of FACTS technology is to improve the control of power flows in both steady-state and transient modes of EPS. Flexibility of Electric Power Transmission, applied as "The ability to adapt to changes in transmission system or operating conditions while maintaining sufficient operating limits in steady-state and transient modes". Controlled Flexible AC Transmission Lines - Flexibility from Electric Power Transmission means "AC Power …

Technologies For Hydrocarbon Stairs To Reduce Environmental Pollution When Operating A Filling Station, Uktam Farmanov, S Khabibullaev Phd, N Mirhodjayeva, Ryuji Kikuchi Dr

Technical science and innovation

The article provides information about the loss of hydrocarbons, as well as economic and environmental problems, and fuel energy is a necessary factor in saving resources. The analysis of losses in the current state of technological processes of transportation and storage of hydrocarbons is presented. Detailed information is provided on the role and functions of collars and gas stations, the type of petroleum products stored in them. The article provides information on the physical and chemical properties of pure petroleum products. It also provides analytical information on the amount of product lost during evaporation of gasoline products. It is shown …

Determination Of Structural-Geomorphological And Neotectonic Elements Controlling The Oil And Gas Performance Of The Ferghana Region Using Digital Space Images, S Nesmeyanov, Rakhimjan Umurzakov, Samariddin Rabbimkulov, O Voeykova

Technical science and innovation

The article describes the results of studies carried out with the aim of identifying the main structural-geomorphological and neotectonic elements that control oil and gas content within the Fergana depression using materials from remote sensing of the Earth. Based on a quantitative analysis of the distribution of oil and gas fields, the main structures that control the oil and gas content of the territory have established stepped zones (31% of the total number of fields), monoclines (22%), near-side slopes and fault zones (10-15%). Possibilities of identifying such areas using Landsat 8 satellite images were considered. In addition, various published geological …

Utilization Of Household Waste-Based Solid Fuel, Shokhrukh Toshpo'latovich Khojiev, Bakhriddin Tilovkabulovich Berdiyarov Phd, Nodir Abdusamikovich Kadirov Phd, Bobur Mirsaid O'G'Li Obido, Mehmet Deniz Turan Phd

Technical science and innovation

Waste, garbage is a mixture of substances, objects and their parts that have lost their consumer properties in the process use and intended for disposal. The purpose of the article is note the main current concepts of the distribution and plastic waste disposal problem and propose its promising solutions. In Uzbekistan, the number of solid utilities waste is 63 million tons per year (about 450 kg per person), up to 25 % of them can be plastic. Plastics are organic materials based on synthetic or natural polymers consisting of monomer units, combined into long macromolecules. The most common plastics are …

Application Of The Ground Laser Scanning Results In Monitoring Of Adjacent Rock Masses Of Deep Careers, Sh Rahimov

Technical science and innovation

The method of laser scanning, used in combination with the traditional mine surveying, is one of the most effective and safest ways to carry out mine surveying and instrumental observations on deforming areas of open mining objects. The article presents the results of ground-based laser scanning of the Kharanutsky coal pit and a comparative analysis to determine the deformations and displacements of the sides for different periods, which was performed in the RISCAN PRO environment. Digital elevation models (DEM) were built, distinguishing observation cycles by color. As a result of comparison, the places of manifestation of deformations and displacements were …

Cosmostruct Ural Model Of The Malguzar Mountains For Ore Bearing Data Processing On The Laiyagun Mineralized Zone, A Abdullayev, O Zokirov, G Anna, E Kutie, Sh Akhmedov

Technical science and innovation

Analysis of geological prospecting, geological surveying, geochemical and other materials of the territory of the Malguzar Mountains allows us to note that here the ore-bearing formations are Silurian formations (sandstones, gravelstones, shales), crumpled into folds, which are complicated by a series of faults of north-west strike, zones of splitting and etc. These structures are rectilinear, their zone is characterized by the presence of small fracture structures, areas of swellings (Liyagun mineralized zone) and splits (Ardakshan area). The reason for these swelling and splitting, where gold mineralization is noted, remains not fully studied. The importance of studying these features of ore-controlling …

Research Of The Stress-Strain State Of The Rock In Contact With The Elements Of The Drill Bit During Drilling, L.G. Toshniyozov, J.B. Toshov, Liu Songyong

Technical science and innovation

Research of the interaction of rock-cutting tools with rock with various approaches is presented in the article. In contrast to analytical and experimental methods with their limited and costly applicability, it is proposed to use numerical modeling to better represent the mechanics of rock destruction, to visualize the stages of destruction in a short time and in a cheaper way. This article allows to get an idea that using the finite element method can get mathematical modeling of plastic deformation, assess the stress-strain state of the bit and optimize the structural elements and working conditions of the rock cutting tool, …

Research Of The Influence Of Technological Factors On The State Of The Sides Of Deep Quarries, D.R. Mahmudov, V.R. Kadirov, Sh.V. Karimov, Y.R. Hamraev

Technical science and innovation

The article considers the influencing technological factors of mining operations on the state of the quarry sides. In technological processes, the stability of the sides of rock and semi-rock rocks and the value of the angle of inclination of the sides is most affected by drilling and blasting operations. It is determined that effective technological schemes in the zone of residual deformations should be carried out taking into account the geological structure of the contour array. Changing the opening scheme is associated with the development system and mining mode. To ensure the safety of the sides of deep quarries, several …

An Algorithm For Controlling A Traction Asynchronous Drive That Minimizes Electrical Power Losses, A.M. Burhanhodjaev, U.T. Berdiev, E.V. Iksar, C.N. Kayumov

Technical science and innovation

Abstract: The article discusses the improvement of traction and energy performance main-line locomotives due to more complete use of possibilities of flexible microprocessor control and efficient algorithm that provides reduction of electrical losses in the traction asynchronous drive over the entire range working capacity. In the best way for a promising loco is tract with using a traction asynchronous drive. Such kind of tract drives allow completely use of the coupling mass of loco compares with collector track drive, due to the absence of a collector it is possible to increase the active length of the rotor and high reliability …

Laboratory Study Of Parameters Of Contour Blasting In The Formation Of Slopes Of The Sides Of The Career, Sh.Sh. Zairov, Sh.R. Urinov, A.B. Tukhtashev, Y.A. Borovkov

Technical science and innovation

Explored theoretically the interaction of explosive charges in the preliminary gap formation in quarries. A methodology has been developed for conducting experimental studies of blast well contour explosions on models, which allows one to investigate crack formation on volumetric models and wave interaction using high-speed video recording of the explosion process in transparent models, as well as determine the parameters of explosion stress waves in samples of real rocks. Theoretical and laboratory researches have established that only the creation of a screening gap for the entire height of the non-working ledge allows you to get a virtually undisturbed array with …

Quantitative Analysis Of The Relationship Between The Size And Location Of Oil And Gas Fields With Gravitational Anomalies Of The Fergana Depression, R. A. Umurzakov, S. A. Rabbimkulov

Technical science and innovation

Based on the analysis of published materials, it is noted that the degree of connection between the indicators of the anomalies of the gravitational field and oil and gas content remains unclear. The aim of the research was to study the nature of the dependence and assess the degree of connection between the size and location of oil and gas fields with gravitational anomalies using the example of the Fergana oil and gas region. To solve this problem, the published material on the geological structure and data on the sizes (effective volume) of deposits, as well as data on deep …

Conditions Of Formation Of Sulfide Waters In Paragenesis With Evaporite And Oil And Gas-Based Formations In The Artesian Pools Of The Republic Of Uzbekistan, M. R. Juraev, G.A. Bimurzaev, B. H. Razykov, B. Kh. Khaidarov

Technical science and innovation

The lithological-facies factor is considered with the aim of studying the natural and geological conditions in which hydrogen sulfide waters are formed in gas and oil fields in the artesian basins of the Republic of Uzbekistan. The distribution of hydrogen sulfide waters is closely related to the areas of joint development of halogen rocks and oil and gas complexes. Since the term “paragenesis” refers to the joint finding of minerals or chemical elements genetically related, this map is a map of the paragenesis of hydrogen sulfide waters with evaporites and oil and gas complexes. In the absence of one of …

The Necessity Of Utilizing Internal Blading At Steep-Falling Deposits, R.Sh. Naimova, S.J. Djuraev, K.Y. Norova, В. N. Sytenkov

Technical science and innovation

The article discusses the necessity to form internal blades in deep steep falling deposits. The experience of formation and the scheme of blading of internal blades in open-cast mines with different mining and geological conditions is summarized. The prospective solution of formation of internal blades for deep quarry Muruntau is given and their prerequisites are defined

Self-Heating And Spontaneous Combustion Angren Brown Coal, M.A. Israilov, T.G. Akbarov, Y.T. Nurboboyev

Technical science and innovation

The article presents the issues of prevention and prevention of processes related to ensuring safe and comfortable working conditions in the development of coal deposits, namely the study of spontaneous combustion of coal Angren deposit. Chemical activity of coals at low temperatures contributing to spontaneous combustion is emphasized, as well as the influence of hot climate in the region on the increase in chemical activity of coals. In this connection, climatic conditions of the region have been studied, i.e., increased temperature (from +250 to +500C) gives a sharp increase in the chemical activity of Angren coal. The main parameter that …

Improving Methods Of Energy- Efficient Operation Of Drilling Equipment Using Vortex Tubes When Drilling Wells With Air Purging, R.U. Djuraev, J.B. Toshov, D.N. Khatamova

Technical science and innovation

The practice of drilling has proven that the use of compressed air as a cleaning agent provides a significant increase in ROP (mechanical drilling speed) and reduces the time spent on eliminating geological complications, which sharply increases the productivity and economy of drilling operations.

However, air has a low heat capacity compared to liquid flushing solutions, this affects the operation of rock cutting tools through high contact temperatures with irreversible consequences such as deformation of matrices, destruction of diamonds, grinding, reduction of diamond hardness and tool burns. To prevent these problems, there is a need to develop technical means and …

Prospects For The Development Of Production Of Reagents For Drilling Solutions Based On Secondary Resources, S.B. Gaibnazarov

Technical science and innovation

The article discusses the prospects for the development of production of reagents for drilling fluids based on secondary resources. Currently, the big problem is the creation of new, highly efficient and affordable drilling fluids and they are essential for successful drilling, to increase productivity and reduce the amount of time. To solve these problems, the article considers the possibilities of synthesis and practical application of new stabilizers for drilling fluids based on waste from chemical enterprises of our republic. The basic physicochemical, rheological and applied properties of the developed stabilizer-reagents are investigated. Specific areas of practical application of the developed …