Geological Engineering Commons^™

Simulation Of Wave Propagation In Granular Particles Using A Discrete Element Model, Syed Tahmid Hussan

College of Graduate Studies: Theses & Dissertations

The understanding of Bender Element mechanism and utilization of Particle Flow Code (PFC) to simulate the seismic wave behavior is important to test the dynamic behavior of soil particles. Both discrete and finite element methods can be used to simulate wave behavior. However, Discrete Element Method (DEM) is mostly suitable, as the micro scaled soil particle cannot be fully considered as continuous specimen like a piece of rod or aluminum. Recently DEM has been widely used to study mechanical properties of soils at particle level considering the particles as balls. This study represents a comparative analysis of Voigt and Best …

A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han

Biological Sciences Faculty Research & Creative Works

Numerous investigations have shown that non-equilibrium discharges at atmospheric pressure, also known as "cold atmospheric plasma" (CAP) are efficient to remove biological contaminants from surfaces of a variety of materials. Recently, CAP has quickly advanced as a technique for microbial cleaning, wound healing, and cancer therapy due to the chemical and biologically active radicals it produces, known collectively as reactive oxygen and nitrogen species (RONS). This article reviews studies pertaining to one of the atmospheric plasma sources known as Dielectric Barrier Discharge (DBD) which has been widely used to treat materials with microbes for sterilization, disinfection, and decontamination purposes. To …

The Interaction Of The Cotton Piece With The Piles Of The Scrabble Cotton Drum, Fazliddin Egamberdiev, Ilkhom Abbazov, Oybek Kholmuratov, Rashid Kaldybaev

Technical science and innovation

This article presents the results of an analytical study of the process of loosening and cleaning raw cotton from small debris by pileging working bodies of purifiers, on the basis of which directions for further research were chosen to optimize the parameters of the developed pile drum with spherical piles and rubber strips. Cotton entering production contains impurities. The processes of loosening and cleaning the fiber shreds are key in the initial stages of ginning, as they prepare the raw cotton for ginning and directly affect the reliability, productivity of these processes and the quality of the resulting fiber. Weed …

Adaptation Algorithm For Self-Tuning Of Parameters Of Models Of Multi-Stage Flotation Processes, Nilufar Sharifzhanova, Maksadhan Yakubov, Francesco Gregoretti

Technical science and innovation

Modern methods for solving problems of planning the execution of batches of tasks in multi-stage systems are characterized by the presence of restrictions on their dimensionality, the impossibility of guaranteed obtaining better results in comparison with fixed packages for different values of the input parameters of the problem. In the article, the author solved the problem of optimizing the composition of job packages running in multi-stage systems using the branch and bound method. Research has been carried out on various ways to form package execution orders tasks in multi-stage systems (heuristic rules for ordering packages tasks in the sequence of …

An Experimental Investigation Of The New Vibration Viscometer, Jamshidbek Ulugbek Ugli Shamuratov

Technical science and innovation

The characteristics of the new oscillating-plate viscometer have been investigated experimentally. The results obtained are as follows: the resonant frequency of plate oscillation decreases with increasing viscosity; the apparatus constant 𝐾 determined experimentally includes the end and slip effects; the dimensions of the plate should be determined by referring to empirical relations between 𝜌𝜇 and Λ(≡{(𝐸𝑎𝐸)−1}𝑛) for various dimensions of the plate; where 𝜌 is the density, 𝜇 is the viscosity; 𝐸𝑎 the resonant amplitude of plate in the air; E the amplitude of plate in a liquid, and 𝑛 a constant. If the distance between the plate and the …

Indicators Affecting Passenger Service Processes And Their Scientific Interpretation, Maxliyoxon Madaminova Maxamatjon Qizi, Saidazim Amanullayevich Ganihodjayev

Technical science and innovation

Many traffic flow parameters affect the performance of the road network at high voltage. These are low vehicle speeds, high vehicle distances relative to road capacity, and density per unit time (lane occupancy). In turn, a number of factors affect the decrease in traffic speed: the presence of slow-moving vehicles in the stream; pedestrians crossing the road irregularly; increase in traffic flow, etc. The issues of public transportation depend on many factors, each of which requires a separate approach and a complex solution. In large cities around the world, the quality indicators of public transport services, including the issues of …

Multi-Mode Regulation Of The Drying Process Of Industrial Gas, Isamidin Xakimovich Sidikov Pr, Nashvandova Gulruxsor Murot Qizi Phd

Technical science and innovation

Currently, much attention is paid to the issue of energy efficiency of gas processing enterprises. The continuous growth of world prices for energy resources requires constant improvement of the management system, providing the most optimal conditions for the flow of technological processes. A conceptual model of the heat-mass transfer process occurring in the absorber as an object of research has been developed, which characterizes the relationship of the variables involved in the drying process of natural gas, control, measurable and immeasurable, as well as controlled parameters have been selected, which are used to develop and study a mathematical model of …

Reducing Uncertainty In Sea-Level Rise Prediction: A Spatial-Variability-Aware Approach, Subhankar Ghosh, Shuai An, Arun Sharma, Jayant Gupta, Shashi Shekhar, Aneesh Subramanian

I-GUIDE Forum

Given multi-model ensemble climate projections, the goal is to accurately and reliably predict future sea-level rise while lowering the uncertainty. This problem is important because sea-level rise affects millions of people in coastal communities and beyond due to climate change's impacts on polar ice sheets and the ocean. This problem is challenging due to spatial variability and unknowns such as possible tipping points (e.g., collapse of Greenland or West Antarctic ice-shelf), climate feedback loops (e.g., clouds, permafrost thawing), future policy decisions, and human actions. Most existing climate modeling approaches use the same set of weights globally, during either regression or …

Beirut Arab University - Faculty Of Engineering - Newsletter Issue 0, Faculty Of Engineering, Beirut Arab University

Engineering Newsletters

No abstract provided.

Molecular And Cellular Level Characterization Of Cytoskeletal Mechanics Using A Quartz Crystal Microbalance, Emily M. Kerivan, Lyle Tobin, Mihir Basil, Dana N. Reinemann

Faculty and Student Publications

A quartz crystal microbalance (QCM) is an instrument that has the ability to measure nanogram-level changes in mass on a quartz sensor and is traditionally used to probe surface interactions and assembly kinetics of synthetic systems. The addition of dissipation monitoring (QCM-D) facilitates the study of viscoelastic systems, such as those relevant to molecular and cellular mechanics. Due to real-time recording of frequency and dissipation changes and single protein-level precision, the QCM-D is effective in interrogating the viscoelastic properties of cell surfaces and in vitro cellular components. However, few studies focus on the application of this instrument to cytoskeletal systems, …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

Myosin Ii Adjusts Motility Properties And Regulates Force Production Based On Motor Environment, Omayma Y. Al Azzam, Janie C. Watts, Justin E. Reynolds, Juliana E. Davis, Dana N. Reinemann

Faculty and Student Publications

Introduction—Myosin II has been investigated with optical trapping, but single motor-filament assay arrangements are not reflective of the complex cellular environment. To understand how myosin interactions propagate up in scale to accomplish system force generation, we devised a novel actomyosin ensemble optical trapping assay that reflects the hierarchy and compliancy of a physiological environment and is modular for interrogating force effectors.

Methods—Hierarchical actomyosin bundles were formed in vitro. Fluorescent template and cargo actin filaments (AF) were assembled in a flow cell and bundled by myosin. Beads were added in the presence of ATP to bind the cargo AF …

Probing Myosin Ensemble Mechanics In Actin Filament Bundles Using Optical Tweezers, Omayma Al Azzam, Janie C. Watts, Justin E. Reynolds, Juliana E. Davis, Dana N. Reinemann

Faculty and Student Publications

Myosins are motor proteins that hydrolyze ATP to step along actin filament (AF) tracks and are essential in cellular processes such as motility and muscle contraction. To understand their force-generating mechanisms, myosin II has been investigated both at the single-molecule (SM) level and as teams of motors in vitro using biophysical methods such as optical trapping. These studies showed that myosin force-generating behavior can differ greatly when moving from the single-molecule level in a three-bead arrangement to groups of motors working together on a rigid bead or coverslip surface in a gliding arrangement. However, these assay constructions do not permit …

Strain-Based Design Of Steel-Polymer-Steel Composite Pipes, Vul Thang

LSU New Orleans Theses and Dissertations

Many offshore single-wall pipelines and structural failures have occurred in the past. As a result, lives were lost, and billions of dollars were spent. In addition, natural disasters such as earthquake fault zones can cause a large volume of soil movement. This can easily damage single-wall pipelines or piles of fixed offshore platforms in the earthquake fault zone.

Currently, the single-wall pipelines are used for the offshore and onshore oil and gas industry. This research investigated the use of double-wall composite pipe steel-polymer-steel (SPS) in place of single-wall pipe to prevent such failures. The double-wall composite pipe has a larger …

Improving The Work Efficiency Of An Air Conditioning System Based On A Chiller, N Usmonov, A Khazratov, J Usmonov

Technical science and innovation

This article deals with evaporative cooling devices used in air conditioning systems. Various ways of lowering the air temperature to the dew point have been identified as a result of improvements to the devices considered. It is also indicated that the circulating water temperature in the system can be lowered to the air temperature on the wet bulb thermometer. As is known, recirculating water is often used as a cooling water in process units to reduce water consumption in industrial plants. Circulating water is heated by recirculation and the heated water is cooled in ventilated cooling towers. This method of …

Current State And Ways Of Increasing The Efficiency Of Technologies For Isolating Water Influxes, A Karshiev, R Suleimanova, K Akhmedova, M Rakhmonkulov

Technical science and innovation

The results of the application of the technology of isolation of water inflows in the wells of the fields of the Mubarek Oil and Gas Production Department are presented. The efficiency is assessed and the problems of the applied technologies for isolation of water inflows are shown. The technical and economic efficiency of the technology for isolating water inflows in wells with collapse of the columns is shown. The flow rates of wells in the fields of the Mubarek oil and gas production department are decreasing due to an increase in the water cut of the produced product. At the …

Study Of The Thermodynamic Properties Absorbation Sulfur Storage Gas Of Zinc And Copper Industry, Berdiyarov Tilovkabulovich Berdiyarov Dr., Sh. T. Khojiev, S. T. Matkarimov, Sh. Munosibov

Technical science and innovation

The article considers the problems of utilization of industrial gases formed in the production of copper and ore containing sulfur anhydrides. Currently, the composition of process gases entering the gas purification department is approximately 6-7% SO₂, 0.2-0.3% SO₃ and other gases, until sulfuric acid is obtained from these gases, the sulfate is treated in a counter-scheme with 8% sulfate acid. The aim is to first reduce the temperature of the exhaust gases and second to avoid flying components such as as As, F, Se. As a result of the studies, the amount of SO₂ in the …

Combined Devices Of Facts Technology, Bahrom Ravshanovich Normuratov Associate Lecturer, Misrikhan Misrikhanov, Shukhrat Khamidov

Technical science and innovation

FACTS - Flexible Alternative Current Transmission System technology is a family of devices, each of which can be used individually and in concert with other devices to control the interrelated parameters of the electrical power system. The mission of FACTS technology is to improve the control of power flows in both steady-state and transient modes of EPS. Flexibility of Electric Power Transmission, applied as "The ability to adapt to changes in transmission system or operating conditions while maintaining sufficient operating limits in steady-state and transient modes". Controlled Flexible AC Transmission Lines - Flexibility from Electric Power Transmission means "AC Power …

Development Of A New Electro-Osmotic Consolidation Apparatus, Yenni Mariana Ramírez-Mazo, Juan Pablo Osorio, Sergio Agudelo

Conference papers

Electro-osmotic consolidation is a ground improvement technique in which a DC voltage is applied to the soil via electrodes, in order to drain the water contained in the pores increasing the effective stress, and thus improving the geotechnical properties of the soil. The technique increases the shear strength, reduces the compressibility, and changes the chemical composition of the saturated soft clayey and silty soils to which it can be applied. Electro-osmotic consolidation has been successfully applied in different projects worldwide. This paper presents the development of a new electro-osmotic consolidation apparatus built at Universidad de Antioquia. Tests were carried on …

Metasurface Cloaks To Decouple Closely Spaced Printed Dipole Antenna Arrays Fed By A Microstrip-To-Balanced Transmission-Line Transition, Doojin Lee, Alexander B. Yakovlev

Faculty and Student Publications

In this work, we present a numerical study of 1D and 2D closely spaced antenna arrays of microstrip dipole antennas covered by a metasurface in order to properly cloak and decouple the antenna arrays operating at neighboring frequencies. We show that the two strongly coupled arrays fed by a microstrip-to-balanced transmission-line transition are effectively decoupled in 1D and 2D array scenarios by covering the dipole antenna elements with an elliptically shaped metasurface. The metasurface comprises sub-wavelength periodic metallic strips printed on an elliptically shaped dielectric cover around the dipole antennas and integrated with the substrate. We present a practical design …

Development Of A Marine Biodegradable Target Balloon, Blake Samuel Robinson, Arash Sam Akhavi, David Leonardo Albarran-Martinez

Materials Engineering

The US Navy utilizes PVC target balloons, known as Killer Tomatoes, that are inflated onboard a naval vessel then deployed into the ocean to calibrate a variety of weaponry. The Navy has requested the investigation of biodegradable polymers to replace the PVC in attempts to reduce ocean waste that is generated from the leftover PVC material. After communicating with American Pacific Plastic Fabricators (APPF), the current manufacturer of the Killer Tomatoes, we gained an understanding of the manufacturing process and the material requirements that would allow a new material to be integrated into their current process. Two proprietary, trial polymers …

Geophysical Observations Of Taliks Below Drained Lake Basins On The Arctic Coastal Plain Of Alaska, R. C. Rangel, A. D. Parsekian, L. M. Farquharson, B. M. Jones, N. Ohara, A. L. Creighton, B. V. Gaglioti, M. Kanevskiy, A. L. Breen, H. Bergstedt, V. E. Romanovsky, K. M. Hinkel

Michigan Tech Publications, Part 1

Lakes and drained lake basins (DLBs) together cover up to ∼80% of the western Arctic Coastal Plain of Alaska. The formation and drainage of lakes in this continuous permafrost region drive spatial and temporal landscape dynamics. Postdrainage processes including vegetation succession and permafrost aggradation have implications for hydrology, carbon cycling, and landscape evolution. Here, we used surface nuclear magnetic resonance (NMR) and transient electromagnetic (TEM) measurements in conjunction with thermal modeling to investigate permafrost aggradation beneath eight DLBs on the western Arctic Coastal Plain of Alaska. We also surveyed two primary surface sites that served as nonlake affected control sites. …

Wetting-Driven Formation Of Present-Day Loess Structure, Yanrong Li, Weiwei Zhang, Shengdi He, Adnan Aydin

Faculty and Student Publications

© 2020 The Authors Present-day loess, especially Malan loess formed in Later Quaternary, has a characteristic structure composed of vertically aligned strong units and weak segments. Hypotheses describing how this structure forms inside original loess deposits commonly relate it to wetting-drying process. We tested this causal relationship by conducting unique experiments on synthetic samples of initial loess deposits fabricated by free-fall of loess particles. These samples were subjected to a wetting-drying cycle, and their structural evolutions were documented by close-up photography and CT scanning. Analysis of these records revealed three key stages of structural evolution: initiation (evenly distributed cracks appear …

Effect Of Geometry And Fluid Viscosity On Dynamics Of Fluid-Filled Cracks: Insights From Analog Experimental Observations, Haitao Cao, Ezequiel F. Medici, Gregory P. Waite, Roohollah Askari

Michigan Tech Publications, Part 1

Fluid-filled volumes in geological systems can change the local stress field in the host rock and may induce brittle deformation as well as crack propagation. Although the mechanisms relating fluid pressure perturbations and seismicity have been widely studied, the fluid-solid interaction inside the crack of a host rock is still not well understood. An analog experimental model of fluid intrusion in cracks between planar layers has been developed to study stress conditions at the margins and tips. A combined high-speed shadowgraph and a photoelasticity imaging system is used to visualize the fluid dynamics and induced stresses on the solid matrix. …

A Mathematical Framework For Estimating Risk Of Airborne Transmission Of Covid-19 With Application To Face Mask Use And Social Distancing, Rajat Mittal, Charles Meneveau, Wen Wu

Faculty and Student Publications

© 2020 Author(s). A mathematical model for estimating the risk of airborne transmission of a respiratory infection such as COVID-19 is presented. The model employs basic concepts from fluid dynamics and incorporates the known scope of factors involved in the airborne transmission of such diseases. Simplicity in the mathematical form of the model is by design so that it can serve not only as a common basis for scientific inquiry across disciplinary boundaries but it can also be understandable by a broad audience outside science and academia. The caveats and limitations of the model are discussed in detail. The model …

Development Of Water Coning Control Design Metrics In Naturally Fractured Reservoirs, Samir Prasun

LSU Doctoral Dissertations

Naturally fractured reservoirs (NFRs) with bottom-water are known for their instant water breakthrough and severe water coning that reduces oil recovery. This is because water channels through the highly permeable fractures easily connecting the well to the aquifer bypassing the oil contained in the matrix. Remedial techniques such as producing below critical-oil rate, optimizing the well spacing and installing the downhole water sink (DWS)/ downhole water loop (DWL) technology, have already been successfully tested in single-porosity reservoirs (SPR). However, applicability of these techniques in NFRs are unknown since only a few studies have been performed on their feasibility in NFRs, …

Load-Balancing Rendezvous Approach For Mobility-Enabled Adaptive Energy-Efficient Data Collection In Wsns, Jian Zhang, Jian Tang, Zhonghui Wang, Feng Wang, Gang Yu

Faculty and Student Publications

Copyright © 2020 KSII The tradeoff between energy conservation and traffic balancing is a dilemma problem in Wireless Sensor Networks (WSNs). By analyzing the intrinsic relationship between cluster properties and long distance transmission energy consumption, we characterize three node sets of the cluster as a theoretical foundation to enhance high performance of WSNs, and propose optimal solutions by introducing rendezvous and Mobile Elements (MEs) to optimize energy consumption for prolonging the lifetime of WSNs. First, we exploit an approximate method based on the transmission distance from the different node to an ME to select suboptimal Rendezvous Point (RP) on the …

Revisiting Lightweight Encryption For Iot Applications: Error Performance And Throughput In Wireless Fading Channels With And Without Coding, Yazid M. Khattabi, Mustafa M. Matalgah, Mohammed M. Olama

Faculty and Student Publications

© 2013 IEEE. Employing heavy conventional encryption algorithms in communications suffers from added overhead and processing time delay; and in wireless communications, in particular, suffers from severe performance deterioration (avalanche effect) due to fading. Consequently, a tremendous reduction in data throughput and increase in complexity and time delay may occur especially when information traverse resource-limited devices as in Internet-of-Things (IoT) applications. To overcome these drawbacks, efficient lightweight encryption algorithms have been recently proposed in literature. One of those, that is of particular interest, requires using conventional encryption only for the first block of data in a given frame being transmitted. …

Cooperative Relay Selection For Load Balancing With Mobility In Hierarchical Wsns: A Multi-Armed Bandit Approach, Jian Zhang, Jian Tang, Feng Wang

Faculty and Student Publications

© 2013 IEEE. Energy efficiency is the major concern in hierarchical wireless sensor networks(WSNs), where the major energy consumption originates from radios for communication. Due to notable energy expenditure of long-range transmission for cluster members and data aggregation for Cluster Head (CH), saving and balancing energy consumption is a tricky challenge in WSNs. In this paper, we design a CH selection mechanism with a mobile sink (MS) while proposing relay selection algorithms with multi-user multi-armed bandit (UM-MAB) to solve the problem of energy efficiency. According to the definition of node density and residual energy, we propose a conception referred to …

Timcc: On Data Freshness In Privacy-Preserving Incentive Mechanism Design For Continuous Crowdsensing Using Reverse Auction, Xiaoqiang Ma, Weiwei Deng, Feng Wang, Menglan Hu, Fei Chen, Mohammad Mehedi Hassan

Faculty and Student Publications

© 2013 IEEE. As an emerging paradigm that leverages the wisdom and efforts of the crowd, mobile crowdsensing has shown its great potential to collect distributed data. The crowd may incur such costs and risks as energy consumption, memory consumption, and privacy leakage when performing various tasks, so they may not be willing to participate in crowdsensing tasks unless they are well-paid. Hence, a proper privacy-preserving incentive mechanism is of great significance to motivate users to join, which has attracted a lot of research efforts. Most of the existing works regard tasks as one-shot tasks, which may not work very …