Geological Engineering Commons^™

Estimation Of Unmeasurable External Disturbances Of A Dynamic Object Based On A Robust Adaptive Kalman Filter, Bunyod Mamurjon Ugli Buronov

Technical science and innovation

This article considers the problem of directly estimating unmeasurable external disturbances acting on a dynamic object under the condition that the state vector of the object is available for measurement. In the considered case, the problem is reduced to the estimation of an unknown input of a dynamic system. It is shown that when the system state is measurable, both a direct inversion scheme based on the object’s dynamic equation and filtering methods that eliminate the need for coarse numerical differentiation can be applied. For slowly varying disturbances, a random walk model with a small process noise covariance is proposed, …

Evaluation Of The Metrological Characteristics Of An Ultrasonic Flowmeter For Water Resources, Makhsud Idrisovich Makhmudov, Uktam Farkhodovich Mamirov, Siroj Sobirovich Nurov

Technical science and innovation

This paper presents the results of evaluating the metrological characteristics of a developed ultrasonic flowmeter intended for measuring water flow in open channels. The study analyzes the main sources of measurement errors and classifies them into methodological, instrumental, additional, systematic, and random components. Experimental investigations were carried out to estimate the random and systematic errors under steady-state flow conditions. Using the least-squares method, the systematic error was separated into additive and multiplicative components, providing a basis for calibration and correction of the measurement results. The reliability of the developed measuring instrument was evaluated using the failure rate method based on …

Evaluation Of Level Measurement Uncertainty For Three Types Of Laser Level Meters Using The Gum Methodology: Calculated Uncertainty Budgets, Uncertainty Profile, And Hardware Component Requirements, Lazizbek Furkatjanovich Saidoripov, Barat Makhmudovich Akhmedov

Technical science and innovation

A methodology is presented for evaluating the uncertainty of liquid petroleum product level measurements using laser level meters based on different measurands’ informative parameters: propagation time, phase difference, and image coordinates. Based on analytical expressions for error components and a traceability chain to the national length standard, calculated uncertainty budgets are developed in accordance with JCGM 100 for time-of-flight, phase-based, and laser–television level meters. Under the assumed input conditions, the expanded uncertainties (k = 2) are 1.66, 0.73, and 1.02 mm, respectively. For the laser–television level meter budget, the Gaussian approximation is verified using the Monte Carlo method (JCGM 101): …

Satellite-Based Detection And Preliminary Flux Estimation Of The 2024 Boysun Methane Blowout Event In Uzbekistan, Shomurod Bakhtiyor Ugli Turaev, Dilbar Shamurodovna Fazilova, Aziz Nigmanovich Kazakov

Technical science and innovation

Estimating accidental methane emissions from gas fields remains a difficult task, especially in remote mountainous areas where continuous ground-based observations are not available. This study examines the uncontrolled gas blowout that occurred in 2024 at the “Mustaqillikning 25-yilligi” gas-condensate field in Boysun district, Uzbekistan. Changes in methane content were analyzed using Sentinel-5P TROPOMI data for August–November 2024, processed in Google Earth Engine (GEE). The location of the accident site was refined using Sentinel-2 optical imagery, while ERA5 wind speed and direction data were applied for the preliminary calculation of methane flux. Based on the XCH₄ time series, four stages of …

Analysis And Optimization Of Intelligent Control Of The Drying Process Under Uncertainty, Azizbek Nodirbekovich Yusupbekov, Marufjon Kobuljonovich Shodiev, Khusniddin Mamarasul Ugli Esonov

Technical science and innovation

This section proposes a multi-criteria Pareto-optimization algorithm, integrated with Herbert Simon's four-stage decision-making scheme (Intelligence–Design–Choice–Implementation) and an ANFIS-based adaptive controller, for simultaneously optimizing the mutually conflicting quality, energy, and time criteria of the wheat-drying process. The algorithm for constructing the set of Pareto-optimal solutions and selecting the compromise solution closest to the ideal point is presented step by step. The implementation of the ANFIS controller in the MATLAB/Simulink environment is comprehensively verified through a simulation block diagram, the Rule Viewer, the Surface Viewer, the training error-function graph, the RMSE convergence graph, and a learning-curve analysis. Training was carried out on …

Mathematical Modelling Of Nitrification And Denitrification Processes Based On Neuro-Fuzzy Bioreactor Models, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon Ugli Mannobjonov

Technical science and innovation

This paper presents the development and investigation of hybrid neural network and fuzzy models for the mathematical modelling of nitrification and denitrification processes in a biological wastewater treatment bioreactor. A comprehensive approach is proposed, integrating a mechanistic model of the ASM1/ASM2d type with neural networks (LSTM and Gaussian Process Regression), as well as a fuzzy control system based on an extended set of expert rules. A digital twin of the bioreactor was developed to allow for the prediction of the dynamic behavior of key parameters such as NH₄⁺, NO₃⁻, dissolved oxygen, etc. within a prediction range of 1 to 12 …

Development Of An Experimental Stand For The Study Of The Directions Of Movement And Velocity Of Air Flows In The Pneumatic Channel Of The Final Aspiration Of The Muz-16 Air Sieve Separator, Hanna Borisovna Torgan, Zulfiya Kakhramonovna Ergasheva

Technical science and innovation

The article presents the results of experimental studies on the rheological properties of pasta dough obtained from various types of wheat flour (bakery highest grade, as well as durum varieties of Belarusian selection). The regularities of changes in the yield shear stress, plastic viscosity, and shear rate of the semi-finished product were studied depending on the key technological factors of extrusion: moisture content (0.28–0.335 kg/kg), temperature (25–55 °C), and discharge pressure (up to 88 · 10^-5 Pa). The operating principle and design features of the modernized pressing unit and die using special converging-diverging (confuser-diffuser) inserts (according to the patents …

Research On The Effectiveness Of Various Methods For Primary Processing Of Silkworm Cocoons, Doston Ishmukhammat Ugli Samandarov

Technical science and innovation

This article presents the results of experimental studies of the primary processing (killing) of silkworm pupae using existing technological methods, as well as three different combinations of infrared (IR) and ultrasound (US). A series of pilot studies was conducted in the laboratory of the Department of Service Technology at Tashkent State Technical University on nine cocoon samples using existing technological equipment and an experimental setup developed under project AL-8724053050 and based on the combined effects of infrared radiation and ultrasound. A comparative evaluation of the studied processing methods was conducted based on the degree of pupal killing, moth hatching, process …

Development Of An Optimal Composition Of A Composite Solvent For Asphalt–Resin–Paraffin Deposits, Gulmira Abduvaliyevna Tadjiyeva, Xasan Irgashevich Kadirov, Shaxnoza Abduvaliyevna Tadjiyeva, Fazliddin Zokir Ugli Murodullayev, Bekmurodjon Baxtiyorjon Ugli Raximjonov

Technical science and innovation

A solvent formulation composed of aromatic hydrocarbons of the C9 fraction and aliphatic alcohols in a 1:1 ratio, supplemented with 1–3 wt.% of a nonionic surfactant, has been developed. The proposed composition demonstrates more than a twofold increase in dissolving and washing efficiency toward paraffin-type asphaltene–resin deposits. Furthermore, the solvent system exhibits pronounced depressant–dispersant properties with respect to paraffin-containing organic deposits. Although numerous investigations have addressed the development of technologies for removing organic deposits in oilfield equipment—primarily focusing on specific aspects of eliminating or preventing asphaltene–resin–paraffin deposits (ARPD) in wells—limited attention has been given to the design of integrated approaches. …

Use Of New Improved Methods For Assessing The Engineering-Geological Characteristics Of Deposits By Depth (Using The Example Of The Akba Deposit)., Elboy Shavkatovich Qurbonov Salom, Abduboqib Djalilovich Karimov, Yokub Yarash Ugli Isomiddinov

Technical science and innovation

The article examines the fracturing and filtration properties of rocks in boreholes, rock outcrops, and underground mine workings at the Akba gold deposit. Based on the results of hydrogeological and engineering-geological studies, methods that fully meet modern requirements were used, the values of the RMR rating of rocks and the indicators of the qualitative content of RQD rocks, as well as the intervals of their changes, were studied, as a result of which it became possible to quickly and accurately assess the strength state of the rock mass of the deposit territory by depth and area.

Experimental Study Of An Automotive Cooling System With A Mechatronic Control System, Avaz Israilovich Yangibayev

Technical science and innovation

This article presents the results of experimental investigations of a passenger car engine cooling system equipped with a mechatronic control system. The experiments were conducted on an intelligent hardware-software laboratory test bench developed using original components of a Chevrolet Gentra vehicle. The study determined the thermodynamic response characteristics and energy performance of the system under varying ambient temperatures (-10 to +50 °C) and engine thermal loads. The experimental results demonstrated that the mechatronic system can maintain coolant temperature with minimal fluctuation amplitude, ensure smooth transient processes, and significantly reduce electrical energy consumption. Based on the obtained results, scientific and practical …

Technology For Obtaining Aliphatic Amines Based On Liquid By-Products Of Polymerization Processes, Kamila Sabirbaevna Allanazarova, Ulugbek Komiljonovich Urinov

Technical science and innovation

Polymerization processes generate considerable amounts of liquid secondary by-products, which are often underutilized despite their significant chemical potential. Addressing the need for sustainable resource use, this study aims to develop a technological method for converting these by-products into valuable aliphatic amines. The experimental approach involved the pre-treatment of liquid polymerization by-products through fractional distillation to isolate C3–C10 fractions, followed by catalytic amination using Raney nickel under controlled temperature (160°C) and pressure (12 atm) conditions. Analytical methods including gas chromatography-mass spectrometry (GC-MS) and Fourier-transform infrared spectroscopy (FTIR) were employed to characterize the reaction products. The results demonstrated the successful formation of …

Investigation Of Energy Efficiency Of An Autonomous Mobile Photovoltaic-Thermal (Pv/T) System With A Polycarbonate Absorber, Sanjar Kodir Ugli Shoguchkarov, Anvar Rakhmat Ugli Rakhmatov, Rushana Husen Kizi Abdullaeva, Orazbek Maratbay Ugli Temirbaev

Technical science and innovation

This study analyzes the enhancement of energy efficiency in photovoltaic-thermal (PV/T) systems, which enable the simultaneous generation of electrical and thermal energy from solar radiation. The research focus is an autonomous mobile unit based on multi-channel polycarbonate heat collectors with a hydraulic diameter of 8 mm, characterized by their lightweight nature and superior corrosion resistance compared to conventional metal absorbers. Experimental investigations were conducted at the solar testing field of the Physical-Technical Institute of the Academy of Sciences of Uzbekistan under extreme continental climatic conditions to determine the system's stable thermophysical indicators. The results demonstrated that active water cooling using …

Modeling Of Terpolymerization Kinetics And Determination Of Reactivity Ratios In The Tdma–Styrene–Maleic Anhydride System, Shohrux Boboxon Ugli Mavlonov, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

In this study, the kinetics of terpolymerization, compositional evolution, and monomer reactivity ratios in the TDMA–styrene–maleic anhydride system were comprehensively investigated. Increasing the initiator concentration from 16.8×10⁻⁶ to 51.3×10⁻⁶ mol•L⁻¹ led to an increase in conversion from 6.4% to 15.2% and reaction rate from 4.075×10⁻⁶ to 8.965×10⁻⁶ mol•L⁻¹•s⁻¹. At low conversion (Xw≈0.02–0.09), the terpolymer composition remained close to the initial feed, although deviations due to differences in monomer reactivity were observed. With increasing conversion, some systems exhibited stable composition (±0.02), while others showed compositional drift (increase of MA fraction from 0.50 to 0.70). The determined reactivity ratios (rTDMA/St≈0.99; rSt/TDMA≈1.62; rTDMA/MA≈2.02; …

Adaptive – Compositional Method For Coordinating Subsystems At Different Levels In Hierarchical Control Systems, Husan Zakirovich Igamberdiyev, Uktam Farxodovich Mamirov Mr, Inomjon Ilxom Ugli Abdukaxxarov Mr

Technical science and innovation

This paper examines the problem of synthesizing algorithms for the composition of subsystems at various levels within complex hierarchical control systems under conditions of uncertainty and resource constraints. It is demonstrated that classical composition algorithms, which rely on the intersection of admissible sets and the use of local optimality criteria, suffer from several significant drawbacks. These include a combinatorial increase in complexity, dependence on the expert selection of parameters, and limited applicability in dynamic environments. To overcome these shortcomings, an adaptive-compositional method is proposed. This method is based on the dynamic recalculation of coordination parameters, the integration of model predictive …

Calculation Of The Basic Parameters Of The Hybrid Power Plant (Hpu) On The Spark Car, Rustam Raximovich Tillahodjaev, Jamoliddin Pardaboy Ugli Turdiev

Technical science and innovation

This article presents one of the effective ways to improve fuel efficiency and reduce emissions of toxic substances, the use of internal combustion engines with the use of an electric drive in their designs. In recent years, two directions in the development of cars with electromechanical drives have been clearly identified, the first is the creation of a pure electric car, the second is the development of an electromechanical drive with a combined (hybrid) power plant. Due to the lack of efficient energy storage available for mass production, pure electric vehicles have relatively low mileage on a single charge. This …

Development Of New Methods For Calculating Pressure And Energy Losses For Pumping Station Water Intakes, Faxriddin Jaylovovich Nosirov, Oleg Yakovlevich Glovatsky, Jurabek Abdyrahmon O'G'Li Urolov, Abduqodirkhon Samatkhonovich Abdullakhaev, Anvar Mamur Ugli Uzokov

Technical science and innovation

The aim of this study is to improve the efficiency of water resource management methods. Improvements to the water intake of the Karshi Main Canal are considered using calculations of pressure losses at the entry and exit of liquid into the flow, which differ from pressure losses in a stationary medium. The article considers some of the methods for using renewable energy sources, where the change in gravitational potential energy does not depend on the way of using energy and the operating scheme is a gravitational energy pump. The implementation of control and monitoring systems is necessary to ensure optimal …

Impact Of Compositing Method Choice On Spectral Fidelity In Semi-Arid Mining Landscapes, Ruslan Nailevich Khadzhaev, Dilbarkhon Shamuradovna Fazilova

Technical science and innovation

This study examines the choice of satellite image compositing method for Landsat 8/9 (Collection 2 Level-2) imagery to calculate the Normalised Difference Vegetation Index (NDVI). This paper compares the methods used to create median and medoid composites for the Angren open pit coal mine. The 'synthetic' nature of the composites is quantified based on a spectral consistency metric. This involves assessing the equivalence of median and medoid values, and analysing the sensitivity of NDVI to the compositing method across varying surface types. A strongly right-skewed distribution of surface reflectance values was found, covering 82.8% of the pixels, mostly in areas …

Theoretical And Practical Foundations Of Healthcare System Digitalization, Sanjarbek Bekturdiev Sharifboyevich Phd, Muxlisa G‘Ulom Qizi G‘Ofurova

Technical science and innovation

The digital transformation of healthcare represents a key direction in improving the accessibility, quality, and efficiency of medical services. This study examines the main components of eHealth, including telemedicine, electronic health records, cloud technologies, and mobile applications, as well as the role of international organizations in promoting national digital health strategies. Particular attention is given to the current state of digital healthcare in the Republic of Uzbekistan, where significant progress has been made in developing infrastructure and implementing information systems, although challenges related to integration, standardization, and regulatory support remain. The work identifies the main trends in the development of …

Mathematical Modelling And Optimisation Of The Reactor For The Esterification Process Of Safflower Oil With N-Butyl Alcohol, Sadritdin Makhamatdinovich Turabdjanov Academician, Hasan Sadriddin Ugli Fozilov, Ozoda Bakhronovna Axmedova, Sadriddin Fayzullayevich Fozilov

Technical science and innovation

This study addresses the mathematical modelling and optimisation of a reactor for the esterification of safflower oil with n-butyl alcohol. To improve process controllability and reduce the need for numerous pilot-scale trials, an ideal-mixing continuous stirred-tank reactor (CSTR) model was adopted. Incorporating reaction kinetics, the effect of contact time on the relative viscosity of the product mixture was analysed. The modelling results indicate that achieving an acceptable degree of feedstock conversion is difficult when a single ideal-mixing reactor is used. Therefore, a CSTR cascade was proposed, and the configuration with N = 2 reactors was selected as the most appropriate …

Refinement Of Wind Speed Estimation At Turbine Hub Height Using Satellite Data And Regression Analysis Under Complex Terrain Conditions, Isroil Abriyevich Yuldoshev, Tulqin Rustamovich Jamolov, Sa'dullo Sayfiddin Ugli Fazliddinov, Jumanazar Farhodjon OʻGʻL Abdurashidov

Technical science and innovation

Reliable assessment of wind energy potential in regions characterized by complex terrain is often constrained by the limited availability of ground-based meteorological measurements. This study proposes an improved regression-based approach for refining wind speed estimates at the wind turbine hub height of 65 m using satellite-derived data from the NASA POWER database combined with a logarithmic vertical wind profile. The proposed methodology is validated using real operational data from a 750 kW wind power plant located in the mountainous Bostanlyk district of Uzbekistan for the period 2018–2021. The regression analysis demonstrates a strong linear relationship between the extrapolated wind speed …

A Platform For Acquiring And Classifying Low-Noise Electrocardiogram Signals For Applications In Cardiovascular Monitoring, Begmamat Berdimurodovich Dushanov, Narzullo Mamatov Dr.

Technical science and innovation

The early screening and continuous monitoring of cardiovascular diseases need effective acquisition and smart processing of electrocardiogram (ECG) signals. In this article, we introduce a compact platform designed for the acquisition of low-noise ECG signals and classification of the signals using a one-dimensional convolutional neural network (1D-CNN). Our compact platform consists of a low-noise analog front-end (AFE), including an instrumentation amplifier and a chain of analog filters, along with a data acquisition component designed to ensure effective suppression of baseline wander and high frequencies. Our compact platform consumes a low amount of power and can therefore be used for continuous …

Chromatography In Analysis And Quality Control Of Oil And Gas Products: Modern Approaches And Prospects, Muborak Akramovna Mirshomilova, Natalia Evgenievna Sheina, Lala Bekirova

Technical science and innovation

Chromatography plays a key role in the analysis and quality control of oil and gas products. Modern chromatographic methods, including gas and liquid chromatography, provide high accuracy, sensitivity and speed of analysis. They allow you to identify impurities, control the composition and compliance of products with standards. The article considers innovative approaches, such as multidimensional chromatography and the use of automated systems. Development prospects are discussed, including integration with AI and digital technologies, which opens up new opportunities to improve the efficiency of quality control in the oil and gas industry. This article considers the role of chromatographic methods in …

Improving The Methodology Of Complex Organization Of Rural Areas Based On Gis Technologies, Anvarjon Pardaboyev

Technical science and innovation

In the world, scientific research is being conducted aimed at improving the efficiency of complex organization of rural areas by utilizing modern geographic information systems (GIS) and remote sensing data. These studies focus on shaping the land allocated to these areas, organizing their activities, and forming the basis of cartographic information. Additionally, the use of modern GIS and remote sensing data has become widespread in the complex organization of rural areas in many countries. This method stands out for its effectiveness in organizing regions today.

In our republic, comprehensive measures are being implemented to consistently develop production through structural, institutional, …

Qualitative Analysis Of The Circuits Of Autonomous Inverters With Shut-Off Valves, Shukhrat Badreddinovich Umarov

Technical science and innovation

The article presents the results of a qualitative analysis of circuits of autonomous current and voltage inverters with cut-off valves; the influence of the charge value of the switching capacitor in parallel and series equivalent circuits on the restoration of the switching properties of the thyristors of the inverter power circuit is studied. It is shown that due to the energy periodically accumulated in the inductive elements of the load, the voltage on the switching capacitor in the cut-off state is greater than in a conventional parallel autonomous current inverter. This circumstance ensures an increase in the switching stability of …

Study Of The Physical-Chemical Properties Of Chitosan Synthesized By The Cryogenic Method From Apis Mellifera Bees, Dilnoza Sohibovna Isomitdinova, Gulnora Akmalovna Ikhtiyarova, Jahongir Mustaqim O’G’Li Sharopov

Technical science and innovation

Chitosan was synthesized from Apis Mellifera dead bees by traditional and cryogenic methods, and the degree of deacetylation, viscosity, and molecular mass of the synthesized sample was studied. Chitosan was synthesized by deacetylation of chitin under cryogenic conditions. NaOH concentration 40%, temperature 90 ± 3 °C, time 120 min. The degree of deacetylation, and molecular mass was determined using an Ubbelode viscometer. DDA was determined by conductometric titration under standard conditions. The degree of deacetylation of Apis Mellifera chitosan was 87%. synthesized by cryogenic method DDA of chitosan was 83% synthesized by traditional method. Conducting the synthesis in liquid nitrogen …

Study Of The Synthesis Mechanism And Some Properties Of Oligomers Based On Epichlorohydrin And Diphenylguanidine, Rovshan Israilovich Ismailov, Normuhamad Edgarov, Alisher Israilovich Ismailov

Technical science and innovation

In this work, the synthesis and the scheme for obtaining an oligomer based on epiiodhydrin with diphenylguanidine were studied, the proportions of epiiodhydrin in the initial mixture, the yield of oligomers, and the reduced viscosity were studied. The results of spectroscopic and elemental analyzes are obtained, which show that changes in the ratio of monomers have almost no effect on the iodine content in the oligomer. This is apparently due to the fact that epiiodhydrin is much more active in reactions than amino compounds. By studying the degree of conversion on the viscosity of the oligomerization products, the effects on …

Justification Of The Effectiveness Of Software For The Design Of Open-Pit Mining, Tolib Olimovich Komilov, Bobirjon Nabijonovich Ashurov, Ulugbek Bakhtiyorovich Sattarov, Ma’Ruf Ixtiyorovich Karimov

Technical science and innovation

The article notes that the economic feasibility of implementing a project based on deposits directly affects the economy of the country and the region, as well as the construction of new facilities, the use of the most balanced approaches and design solutions in a complex will allow achieving the set goal of increasing production volumes and bringing the enterprise to a new level of development. In order to achieve the above goals, it has been proven with the implementation of investment projects using software for the design of open-pit mining, it is possible to further develop the region, agriculture with …

Development Of A Universal Humidity Converter At Ultra High Frequency, Hulkar Asadullayevna Usmonova, Asadulla Turgunbayev

Technical science and innovation

The article proposes the and principle of operation of a universal primary measuring transducer of humidity at an ultra-high frequency with reciprocating motion along the vertical axis of rotation, which allows increasing the information redundancy of the primary measuring transducer (the influence of inhomogeneities, including humidity in the composition of the material, on the measurement result is averaged). The design of the primary measuring transducer under consideration provides for correction of the moisture measurement result by the mass (density) of the material, which will make it possible to carry out measurements without preliminary weighing the sample. The obtained results of …

Regular Algorythms For Synthesis Of Optimal Control Systems For Dynamic Objects, Igamberdiyev Husan, Uktam Farkhodovich Mamirov, Xankeldiyeva Zebiniso

Technical science and innovation

The article presents algorithms for the synthesis of an optimal control system for dynamic objects. As a model, we consider a differential equation of a continuous one-dimensional system in the form of a state space, which has the properties of controllability and observability. The paper shows the need to use an observation device in order to assess how the properties of the controlled system change with the slightest change in the parameters of the control object, to assess the sensitivity of the system to these changes. When finding a solution to the equation formulated to find the parameters of the …