Engineering Science and Materials Commons^™

Dense Platinum Nanoparticles Confined In Mn-N-C Nanocages For Robust Heavy-Duty Pemfcs, Lei Zhao, Zhen-Min Cao, Jia-Yu Zuo, Ming-Liang Yang, Hong-Yan Qiao, Jun-Song Chen, Rui Wu

Journal of Electrochemistry

High-loading Pt cathodes are essential for heavy-duty proton exchange membrane fuel cells but suffer from a critical tradeoff between ionomer sulfonate poisoning and nanoparticle instability. Herein, we report a spatial confinement strategy to encapsulate dense Pt nanoparticles (~51.8 wt%) within Mn/N-co-doped mesoporous carbon nanocages (denoted as Pt-MnNC). This architecture excludes bulky ionomers to create an ionomer-shielded environment against sulfonate poisoning, while Mn-N_x-mediated strong metal-support interactions anchor the Pt nanoparticles to prevent agglomeration and further boost durability. In the 5 × 5 cm² membrane electrode assembly tests, the Pt-MnNC catalyst delivers an exceptional power density of 1.26 W·cm …

Efficient Acidic H2O2 Electrosynthesis Over Co Atoms Anchored On Nitrogen-Doped Hierarchical Porous Carbon, Xiao Huang, Zi-Hao Zhan, Hao-Xu Niu, Guan-Yu Luo, Jin-Tao Huang, Bo-Xuan Jin, De-Li Wang

Journal of Electrochemistry

The two-electron oxygen reduction reaction (2e⁻ ORR) presents a promising route for the on-site production of hydrogen peroxide (H₂O₂), offering a green alternative to energy-consuming anthraquinone process. However, the high selectivity toward the competing 4e⁻ ORR over the desired 2e⁻ pathway leads to low Faradaic efficiency for H₂O₂, posing a critical challenge in catalyst design. In this work, a nitrogen-doped hollow hierarchical porous carbon with anchored Co atoms (CoN/HPC) was constructed for high-performance H₂O₂ production. The as-prepared Co-N/HPC catalyst showed excellent 2e⁻ ORR performance, achieving …

Engineering Small-Sized Cations With Strong Solvation For High-Voltage Supercapacitors, Tong Huo, Pan Liu, Hao Chen, Peng Zhang, Zhen-Lei Chen, Guo-Fu Sun, Zhi-Qiang Shi, Jing Wang

Journal of Electrochemistry

Supercapacitors (SCs) have attracted much attention in the field of energy storage due to their high power density and long cycle life. However, their relatively low energy density limits their application in a wider range of fields. Methods to increase energy density include enhancing specific capacitance and extending operating voltage window. Herein, we report a novel electrolyte salt, tetramethylammonium bis(fluorosulfonyl)imide (TMA-FSI), the resulting electrolyte formed with propylene carbonate (PC), designated as TMF, exhibited a wide electrochemical stability window (ESW) of 5.09 V. On the one hand, we found that the small size of TMA⁺ enables it to enter the …

In Situ Electrochemical Characterization Techniques For Active Hydrogen In Electrocatalytic Nitrate Reduction To Ammonia, Hong-Mei Li, Mei Yi, Zhao-Yu Jin, Ming-Hao Xie, Khalid M. Omer, Yong Guo, Pan-Pan Li

Journal of Electrochemistry

Electrocatalytic nitrate reduction to ammonia (NitRR) represents a sustainable pathway that integrates environmental remediation with the production of high-value ammonia. However, the activity and selectivity of this process are limited by the generation, consumption, and dynamic equilibrium of the key transient intermediate—active hydrogen (*H). Precise modulation of *H necessitates a comprehensive understanding of its behavior, which relies fundamentally on advanced in situ electrochemical characterization techniques. However, a systematic review dedicated to the rational selection and application of in situ electrochemical techniques for the specific characterization of *H in NitRR, with clear definitions of each technique's "detectable targets, quantitative accuracy, and …

Neural Network Driven By Electrochemical Performance Data For Predicting The Discharge Termination Time Of Seawater Electrolyte-Based Metal-Air Batteries, Peng-Peng Shen, Yi-Chi Pan, Yu-Rong Liu, Lu-Dan Zhang, Ning Niu, Guan-Jun Wang, De-Kun Yang, Xin-Long Tian, Peng Rao

Journal of Electrochemistry

Seawater electrolyte-based metal-air batteries exhibit great promise for marine energy supply systems. However, conventional statistical analysis methods, though applicable to seawater metal-air battery lifetime prediction, have inherent limitations of insufficient prediction accuracy and large error. Herein, a deep time-series regression framework based on InceptionTime and incorporating prior-biased attention pooling is proposed to construct a nonlinear mapping between electrochemical performance sequences and the discharge termination time of catalysts. Specifically, chronoamperometric profiles are employed to extract long-term stability features, while prior knowledge derived from linear sweep voltammetry is introduced to strengthen the attention weighting over critical potential regions. Under a nested leave-one-catalyst-out …

Microwave-Assisted Synthesis Of Core-Shell Structured Pd@Pdptcufe Recessed Truncated Octahedral Nanocrystals For Multifunctional Electrocatalysis, De-Zhong Hu, Wen-Dan Jiang, Wei Keat Ng, Jun Yang, Xiong-Wu Kang

Journal of Electrochemistry

Developing cost-efficient and durable multifunctional electrocatalysts of hydrogen evolution reaction, oxygen reduction reaction and oxygen evolution reaction is crucial for improving energy conversion efficiency in electrolytic water splitting electrolyzer and advancing rechargeable zinc-air batteries. Polyhedral shaped nanocrystals with well-defined crystal facets represent a type of model catalysts that enables the exploration of structure-activity relationships. However, it is still very challenging to prepare alloy nanocrystals with multiple metal components due to their complicated redox potentials and mixing enthalpy. Herein, we report a rapid microwave-assisted polyol reduction method for syntheses of core-shell Pd@PdPtCu, Pd@PdPtCuNi, Pd@PdPtCuCo and Pd@PdPtCuZn octahedral nanocrystals, and recessed truncated-octahedral …

Percolation-Induced Thermo-Rheological Transitions In Biobased Graphene Nanoplatelet Nanofluids, Abiodun A. Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biobased lubricants with thermally responsive rheology are increasingly needed for high-efficiency mechanical systems. Graphene nanoplatelet (GnP) nanofluids in vegetable oils are promising candidates, yet their percolation-driven thermo-rheological transitions remain insufficiently understood. In particular, the coupled concentration–temperature landscape controlling network-mediated flow transitions has not previously been established. Here, surfactant-free GnP nanofluids were prepared in high-oleic soybean oil (HOSO) at concentrations of 0.025–2.15% v/v (ϕ), and their rheological response was mapped between 25°C and 80 °C under steady-shear and oscillatory conditions. Below the percolation threshold (ɸ ≤ 0.1% v/v), the nanofluids exhibit near-Newtonian behavior, moderate reversible viscosity enhancement, and classical Arrhenius-type temperature …

Modeling Seiche Oscillations Using Damped Vibration Differential Equations, Bianca Gerity, Arineh Shahbazi

Discovery Day - Daytona Beach

A seiche oscillation is a standing wave that oscillates in an enclosed body of water, like a lake or pool. Seiches are caused by strong winds, earthquakes, and rapid atmospheric changes. Seiches are an excellent real-world example of damped harmonic motion. The physics of these unique vibrations can actually be modeled using a second-order differential equation for damped oscillators of the general form mx''+cx'+kx=0, where m represents the mass of the vibrating water column, c represents the energy dissipation due to friction and viscosity, and k represents the force governed by gravity and the basin's geometry. The objective of this …

Mechanical Vibrations And Damping, Axon Deadrick, Will Standish, Tanay Agarwal

Discovery Day - Daytona Beach

Mechanical vibrations occur in many engineering systems and can be described using second-order differential equations. In this project, the motion of vibrating systems is studied using the mass–spring model. The focus is on three types of oscillations: free vibrations, dampened vibrations, and forced oscillations. Free vibration describes how a system moves when it is displaced and then released without any external force. Damped vibration includes effects such as friction or resistance that cause the motion to gradually decrease over time. Forced oscillations occur when an external force acts on the system and continuously drives the motion. This project also examines …

Mechanical Vibrations And Damping – Structural Analysis, Kelsey Hunsicker, Sarah Kraus, Sophia Muller Martinelli De Souza

Discovery Day - Daytona Beach

Mechanical Vibrations are crucial in understanding and structural analysis of engineering systems such as bridges and airplane wings. If not considered, these vibrations can lead to structural fatigue or failure. By using differential equations, structural vibrations will be examined. Researching the different kinds of vibrations and damping will help to find the vibration behavior of the system. For example, a mass-spring damper system will use second-order linear differential equations. The systems model can be shown to be underdamped, overdamped, or critically damped. These will compare the amplitudes and oscillation differences between the systems by using computational code. Analyzing these differences …

Numerical Investigation Of The Nonlinear Simple Pendulum And The Dependence Of Oscillation Period On Initial Angle, Kelly Wold, Aidan Hart, Patrick Gilliam

Discovery Day - Daytona Beach

Numerical Investigation of the Nonlinear Simple Pendulum and the Dependence of Oscillation Period on Initial Angle examines how the oscillation period of a simple pendulum varies with initial angular displacement and evaluates the accuracy of numerical methods in capturing this behavior. In classical treatments, the small-angle approximation simplifies the governing differential equation and predicts a constant period independent of amplitude; however, this assumption breaks down for larger angles, where the system exhibits nonlinear dynamics. The objective of this project is to model the full nonlinear equation of motion and quantify how the period depends on initial conditions. To achieve this, …

Emergent De Sitter Expansion And Closed Topology From The Cosmic Fabric Model As An Open Thermodynamic System: Resolving The Negative Bulk Modulus Paradox, T G. Tenev, C B. Ward, T F. Tenev, M F. Horstemeyer

Faculty Publications and Presentations

The Cosmic Fabric Model establishes a continuum-mechanics isomorphism to General Relativity by representing physical space as an elastic three-dimensional hyperplate embedded in a four-dimensional spatial bulk. Reproducing vacuum kinematics requires a vanishing P-wave modulus, which in turn implies a negative bulk modulus—an apparent thermodynamic instability in a closed system. This paradox is resolved by recasting the framework as an open system: the instability is not pathological but instead drives cosmic expansion. In this interpretation, the observable universe is a lower-energy solid formed through continuous solidification from a higher-dimensional precursor fluid. Using multiplicative kinematics from finite-growth mechanics, the model shows that …

Dynamic Reconstruction Engineering Of Anti-Corrosion Ni-Based Anodes For Alkaline Seawater Electrolysis, Yi-Gang Zhang, Wen-Wen Xu, Tian-Yu Zhang, Zhi-Yi Lu

Journal of Electrochemistry

Green hydrogen production via alkaline seawater electrolysis offers an environmentally sustainable and potentially cost-effective route to address both energy and climate challenges. Achieving long-term anode stability under complex ionic environments and industrial current densities remains a central bottleneck. Specifically, Ni-based anodes exhibit intense surface reconstruction during the oxygen evolution reaction, necessitating dynamic anti-corrosion strategies. This mini review systematically summarizes reconstruction engineering approaches to develop anti-corrosion Ni-based anodes of alkaline seawater electrolysis across increasingly complex ionic environments from simulated seawater to real seawater: (i) Cl^– dominated; (ii) Cl^– with co-existing oxyanions, and (iii) Cl^–  with co-existing Br^{– …}

Preparation And Performance Study Of In-Situ Self-Assembled Biphasic Smmn2O5-Nimn2O4 Composite Cathode, Neng-Chu Xia, Yu Zhou, Qin Wang, Jia-You Zhang, Chun Yu, Yang Zhang, Wan-Bing Guan, Jian-Xin Wang

Journal of Electrochemistry

Mullite-structured oxides exhibit excellent oxygen reduction reaction activity, possess a low thermal expansion coefficient due to their unique crystal structure, and can eliminate the need for a barrier layer and simplify the preparation process as they contain no alkaline earth elements. Thus, they hold great promise as novel cathode materials for solid oxide fuel cells. In this work, a mullite-spinel-structured SmMn₂O₅-NiMn₂O₄ (SMO-NMO) composite cathode was one-step synthesized via a solid-liquid composite route, and its in-situ self-assembly enabled good compatibility with the electrolyte without any barrier layer. Characterization results showed that the SMO:NMO = …

In-Situ Stm Visualization Of Molecular Structural Evolution During Electrochemical Oxidation Coupling Of Para-Aminothiophenol On Au(111), Zi-Wei Ma, Tai-Rui Wu, An-Ni Zheng, Lai-Ke Chen, Yuan-Hui Xiao, Zhao-Bin Chen, Qing-Na Zheng, Jian-Zhang Zhou, Jia-Wei Yan, De-Yin Wu

Journal of Electrochemistry

Para-aminothiophenol (PATP) is not only a widely-used probe molecule in the field of surface-enhanced Raman spectroscopy (SERS), but also an important model molecule for interfacial reactions, exhibiting distinct photo- and electro-oxidation pathways, so that PATP is selectively activated under different external fields. The evolution of products and intermediates during electrochemical oxidative coupling remains unknown. In this study, we have investigated the dynamic electrochemical oxidation process of PATP on the Au(111) surface using cyclic voltammetry, electrochemical (EC)-SERS, and in situ electrochemical scanning tunneling microscopy (EC-STM). The results showed that PATP forms an unsaturated adsorption coverage on Au(111) in an acidic solution. …

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang

Journal of Electrochemistry

Hybrid ion conductors that transport multiple ionic conductive species provide a useful platform for understanding how mixed-ion transport governs ionic conductivity within a single phase. However, the controlled introduction of multiple mobile ions into solid-state electrolytes and a mechanistic understanding of their migration within the framework remain challenging. Herein, a skeleton-retained Li⁺↔Na⁺ cationic exchange was used to simultaneously induce Li⁺ and Na⁺ cations into the NASICON-type framework of Li_3–xNa_xZr₂Si₂PO₁₂ (0 < x < 3). We show that the interpenetration of NaO₆ and NaO₈ coordination polyhedra significantly influences the ionic conductivity of hybrid ion conductors. Computational …

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen

Journal of Electrochemistry

Carboxymethyl cellulose (CMC) is a water-processable binder widely used for graphite anodes. However, a microscopic understanding of why the identity of CMC counterions (Li⁺/Na⁺/K⁺) strongly affects electrode performance remains limited. Here, molecular dynamics (MD) simulations are used to track Li⁺ transport accessibility across electrolyte/CMC/graphite three-phase interfaces, comparing pure CMC-Li, CMC-Na, CMC-K, and mixed-counterion CMC binders. We find that CMC-Li sustains a continuous Li⁺ transport pathway from the electrolyte through the binder phase toward graphite. In contrast, in CMC-Na and CMC-K, Na⁺/K⁺ ions preferentially enrich at the graphite/binder interface, forming …

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang

Journal of Electrochemistry

Molecular catalysts serve as ideal platforms for studying electrocatalytic reaction mechanisms. While current research mainly focuses on modulating central metals or surrounding ligands, the influence of molecular spatial configuration remains largely unexplored. Herein, we synthesized two cobalt complexes with similar ligand environments but distinct spatial geometries, a planar cobalt hexaazamacrocyclic complex (CoHAM) and a non-planar acyclic Co(phen)₂Cl₂, and evaluated their performance in CO₂ reduction reaction (CO₂RR). The planar CoHAM exhibited dramatically superior CO₂RR performance compared to the non-planar Co(phen)₂Cl₂. Through a series of combined analyses using in-situ …

Physicochemical Properties And Chemical Compositions Of Cashew Nut Shell Liquid Extracted With Carbon Dioxide–Expanded Hexane, Neema Msuya, Joseph Yn Philip, Frank Jacob, Kando K. Janga

Tanzania Journal of Engineering and Technology (TJET)

Cashew nut shell liquid (CNSL) is a mixture of phenolic compounds that can effectively replace commercially available phenols in various applications. This study investigated the physicochemical properties and chemical composition of CNSL extracted using CO₂–expanded hexane (CXH) and compared to the traditional Soxhlet extraction method. Steamed cashew nut shells (sCNS) were used in both cases.  The CXH was carried under varying CO₂-mole fractions (0.468-0.892) and temperatures (20-36 °C) whereas Soxhlet extraction was performed at atmospheric pressure and hexane boiling point. Response Surface Methodology (RSM) with Central Composite Face-Centred Design (CCFD) was employed to evaluate the effect …

Hybrid Solar - Coal Thermal Energy System For Industrial Process Heat At Sayona Drinks Limited In Tanzania, Santos Kihwele, Elisha D. Bitesigirwe

Tanzania Journal of Engineering and Technology (TJET)

Over the past two decades, global efforts to mitigate pollution from conventional energy sources have intensified, with coal remaining a major contributor to carbon emissions. While fossil fuels cannot be eliminated from thermal generation in manufacturing industries, particularly in middle‑income countries such as Tanzania, they continue to dominate as the primary energy source. Industries including food and beverage, paper, textile, paints, chemicals, and pharmaceuticals require substantial thermal energy for heating and drying, and typically rely on coal and natural gas.This study introduces a unique application of a parabolic trough solar thermal system with integrated thermal energy storage, specifically tailored to …

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Engineering Nanoelectrocatalytic Systems For Co2 And Nitrate Conversion Into Value-Added Chemicals, Abdelrahman Mohamed Abdelmohsen

Theses and Dissertations

The thesis addresses two major related environmental crises: nitrate pollution of water systems and the ever-increasing levels of atmospheric carbon dioxide. Both challenges are closely linked to anthropogenic disturbance of nitrogen and carbon cycles and require sustainable, energy efficient mitigation techniques. In this study, we investigate electrochemical conversion routes as a unified approach to convert these pollutants into value-added compounds: ammonia (NH3) via nitrate reduction (NO3-RR) and ethylene (C2H4) via carbon dioxide reduction (CO2RR). The first half of this work deals with the design and engineering of Cu-Zn alloy electrocatalysts for efficient NO3-RR. Tuning the alloy composition and surface nanostructure …

Computational Insights Into Nucleosome Dynamics In Epigenetics Using Molecular Dynamics Simulations, Rutika Patel

Dissertations, Theses, and Capstone Projects

Nucleosome core particles (NCP) are the building blocks that form a highly organized and compact chromatin structure. Nucleosomes package DNA in the nucleus of eukaryotic cells. The NCP consists of about 147 base pairs of DNA wrapped around the histone octamer, with 1.65 superhelical turns in a left-handed manner. The histone octamer is composed of two copies of H3, H4, H2A, and H2B. Together with histone H1 and linker DNA, they further assemble into a higher-order chromatin structure. The nucleosome complex is stabilized by electrostatic interactions between positively charged histone residues and the negatively charged DNA backbone. To effectively access …

Modulating Electronic Structure With Linearly Fused Pyrazine Units For High-Voltage And Stable Zinc-Organic Batteries Cathode, Min-Jian Zhao, Li-Bin Zhang, Jin-Tao Wang, Kun Ding, Hai-Mei Liu, Yong-Gang Wang

Journal of Electrochemistry

High-voltage n-type organic cathode materials are critical for constructing zinc-organic batteries (ZOBs) with high energy density and long cycle life. However, the intrinsically unfavorable electronic structures and relatively high LUMO energy levels of most n-type materials often lead to sluggish kinetics, high solubility, and suboptimal discharge voltages (< 0.8 V). Here, we design a small molecule, quinoxalino[2’,3’:5,6]pyrazino[2,3-f][1,10]phenanthroline (DPQP), as a ZOB cathode by introducing locally electron-deficient motifs into the conjugated backbone of aromatic compounds. The linearly fused pyrazine units extending the pyrazine–benzene framework effectively optimize the electronic structure, thereby significantly enhancing the discharge voltage. Meanwhile, the expanded π-conjugated plane suppresses dissolution and accelerates charge-transfer kinetics. Benefiting from these features, the DPQP electrode exhibits an exceptional increase in average operating voltage from 0.61 V to 1.07 V (vs. Zn²⁺/Zn) at 0.1 A·g^–1, with an overpotential of only 140 mV. Notably, no discernible voltage decay occurs as the current density increases, indicating rapid and highly reversible redox kinetics. Furthermore, the DPQP cathode delivers outstanding cycling stability, maintaining over 2000 h of continuous operation at 0.1 A·g^{–1 …}

(Co,Ni,Mn,Cu,Zn)O High-Entropy Oxide Nanotubes As Efficient Bifunctional Electrocatalyst For Oxygen Evolution And Hydrazine Oxidation Reactions, Pan-Yan Chen, Wan-Wan Wu, Heng Bian, Wei-Wei Li, Xin-Sheng Zhao, Lu Wei

Journal of Electrochemistry

High-entropy oxides (HEOs) present significant scientific challenges in both design and synthesis due to their multielement and high-entropy nature, which involves complex combinations of multiple metal cations and oxygen anions, typically arranged in equimolar ratios to achieve structural stability. Herein, one-dimensional (Co,Ni,Mn,Cu,Zn)O high-entropy oxide nanotubes (HEO-NTs) are fabricated by means of a gradient electrospinning strategy with a tailored polyvinyl alcohol (PVA) molecular weight distribution and controlled pyrolysis. Benefiting from the HEO features and the synergistic effect of multicomponent sites, the as-synthesized (Co,Ni,Mn,Cu,Zn)O HEO-NTs exhibit exceptional bifunctional electrocatalytic activity for the oxygen evolution and hydrazine oxidation reactions (OER/HzOR). This study offers …

An Analytical Framework For Quantifying Urban And Community Resilience To Natural Hazards From Cell-Phone Gps-Location And Traffic-Flow Data, Georgios Chatzikyriakidis

Civil and Environmental Engineering Theses and Dissertations

Urban areas are increasingly exposed to natural hazards while accommodating a growing share of the global population, yet a consistent science-based framework for quantifying urban and community resilience remains lacking. This dissertation develops a physics-based analytical framework grounded in statistical mechanics and the quantitative theory of Brownian motion. A city is conceptualized as a complex medium in which citizens move analogously to Brownian particles within a viscoelastic environment, influenced by socioeconomic interactions and infrastructure functionality.

A central premise is that urban resilience, interpreted as engineering resilience (an outcome), can be quantified through a single metric: the mean-square displacement MSD=⟨r²(t)⟩, of …

Molecular Catalysts For Electrochemical Nitrogen Activation Toward Sustainable Ammonia Synthesis, Jin-Xiu Han, Hao Xue, Xian-Biao Fu

Journal of Electrochemistry

Homogeneous electrocatalytic nitrogen reduction reaction (NRR) provides a powerful framework to interrogate molecular nitrogen-fixation pathways under mild conditions. By tuning the metal center, ligand architecture, and reaction medium, these systems enable capturing key intermediates and delivering mechanistic insight at the molecular-level resolution. Nevertheless, advances remain constrained by highly reduced operating potentials, intense competition from the hydrogen evolution reaction (HER), limited durability in turnover, and inadequate long-term stability.

In this review, we take electron delivery to the molecular active site as the guiding principle for organizing homogeneous electrochemical N₂ activation and transformation. We classify reported systems into direct electron transfer …

Water-Driven Solid Electrolyte Interphase Governs Continuous-Flow Ammonia Electrosynthesis, Peng-Bo Liu, Sheng-Liang Zhai, Ji Huang, Zhong-Shuo Zhang, Jie Zeng, Shao-Feng Li

Journal of Electrochemistry

Flow-cell architectures have emerged as a powerful platform for continuous and stable lithium-mediated nitrogen reduction (Li-NRR), enabling ambient-condition electrochemical ammonia synthesis and offering a promising alternative to Haber-Bosch processes. However, Li-NRR is exceptionally sensitive to trace water, and even minor variations in water content can profoundly alter interfacial chemistry. Here, we systematically investigate how initial water concentration affects Li-NRR performance in a continuous-flow cell. Excess water drives the formation of a thick solid electrolyte interphase (SEI) layer, which may impede nitrogen access to metallic lithium and hinder lithium-ion transport. As a result, the ammonia Faradaic efficiency collapses from ~61% to …

Insertion Of Noble Metal Free Cathodic Catalyst Layer With Fe-N-C Catalyst For Boosted Performance Of Pemfc, Shi Zhou, Muhammad Tariq, Asif Nadeem Tabish, Muhammad Salman, Fan-Di Ning, Muhammad Rayyan Tayyab, Ran-Ran Peng, Meng-Geng Hao, Wen-Mu Li, Xiao-Chun Zhou

Journal of Electrochemistry

Economical Fe-N-C catalysts are considered as promising alternatives to platinum group metal catalysts for proton exchange membrane fuel cells (PEMFCs). Despite exhibiting robust activity on rotating disk electrodes, their performance within membrane electrode assemblies often experiences limitations, such as decreased O₂ diffusion, high H₂O₂ formation, low proton conduction, and a lower electron transfer number. In this study, key factors, including proton transport, electron conduction, and gas diffusion within air-breathing PEMFCs, have been investigated by adjusting cathode catalyst layer (CCL) compositions. From the experimental results, the optimal peak power density was obtained when the loading of Fe-N-C …

Complex Systems Mapping Of Fiscal Growth Dynamics At Strategic Maritime Chokepoints Using Time-Series Slopes, Rahul Balamurugan, Preethi Nanjundan, Avichal Sharma

Northeast Journal of Complex Systems (NEJCS)

This study examines how maritime and trading states allocate public resources between defence, health, and economic growth around three strategic chokepoints the Strait of Malacca, the Strait of Hormuz, and the Suez Canal. The analysis extends the classic “guns versus butter” framing by treating defence and health spending as co-evolving components of an interconnected fiscal-growth system. Using World Development Indicators data (1999-2024), trend slopes are estimated for military spending (% of GDP), healthcare spending (% of GDP), and GDP growth (annual %). Two derived indicators are computed, a defence-to-health slope ratio (military slope/health slope) and a fiscal-balance proxy (health slope …