Engineering Education Commons^™

A Longitudinal Analysis Of Pathways To Computing Careers: Defining Broadening Participation In Computing (Bpc) Success With A Rearview Lens, Mercy Jaiyeola

Theses and Dissertations

Efforts to increase the participation of groups historically underrepresented in computing studies, and in the computing workforce, are well documented. It is a national effort with funding from a variety of sources being allocated to research in broadening participation in computing (BPC). Many of the BPC efforts are funded by the National Science Foundation (NSF) but as existing literature shows, the growth in representation of traditionally underrepresented minorities and women is not commensurate to the efforts and resources that have been directed toward this aim.

Instead of attempting to tackle the barriers to increasing representation, this dissertation research tackles the …

Disambiguation Of Large-Scale Educational Network Data For Social Network Analysis, Adam Weaver

Fall Student Research Symposium 2021

Social Network Analysis (SNA) is a research method which quantitatively maps qualitative social interactions between individuals who comprise a ‘network’. Delineating these social networks yields highly valuable data, including SNA measures like centrality, which can be used to measure social influence, connectivity, and more. Further, these networks can also be visualized by graphing individuals as ‘nodes’, and then by drawing ‘edges’ (the lines that connect them) to produce sociograms. With these sociograms, researchers can concurrently conduct visual and statistical analysis of relations between node and network traits of interest. As a result of these capabilities and the growth of social …

Understanding Students’ Global Interdependence In Science Instruction, Walter S. Smith

Journal of Global Education and Research

Multiple American educational organizations such as the National Education Association, Association for Supervision and Curriculum Development, and the Council of Chief State School Officers have advocated for globalizing the K-12 curriculum. The National Science Teaching Association (NSTA) in a position statement on international education and the Next Generation Science Standards have produced goals and standards for internationalizing the science curriculum by addressing topics such as climate change, environment, and disease that cross borders. In contrast to those pronouncements on the curriculum, this article views global science education through an instructional lens that focuses on a students’ global interdependence in science …

Raising The Level Of Environmental Concern Of Senior Students Taking The Electronics Engineering Laws And Ethics Through Climate Change Awareness Study, King Harold A. Recto, Romano Q. Neyra

Electronics, Computer, and Communications Engineering Faculty Publications

Two general areas that future electronics engineers are honed are competence and character. Most of the courses he takes fall in the general area of competence. This includes subjects like Circuit Theory, Electronic Design and Analysis, Communication Systems, and the like. Subjects dealing with character, in contrast, are limited. In some universities, it may just be Electronics Engineering (ECE) Laws and Ethics and the focus is on “engineering made by man for man.” In this traditional view of Engineering, the environment is often neglected since it’s not about “man” (as opposed to the “society”). Over the last years, however, concerns …

Supporting Psychosocial Interactions In Electronics 1 During Online Learning Using Multisim, Romano Q. Neyra, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

There has been a body of research that shows the benefits of engaging the students in the learning process. This has been even more important now that there are not yet face-to-face meetings in engineer schools and students are confined in their virtual classrooms. Research show benefits of student engagement include increased attention and focus, motivation to utilize higher-level critical thinking skills, and promotion of learning experience. One of the means by which students are engaged in Electronics 1 Classes is through the use of Multisim Software. A student survey was done to randomly select students in Electronics 1 to …

Design And Analysis Of The Virtual Reality Welding Training, Ritesh Chakradhar

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Ritesh Chakradhar on November 19, 2021.

Towards Promoting Sustainable Construction In Egypt: A Life-Cycle Cost Approach, Minas Nagy Assad

Archived Theses and Dissertations

No abstract provided.

Insights From Two Decades Of P-12 Engineering Education Research, Cary I. Sneider, Mihir K. Ravel

Journal of Pre-College Engineering Education Research (J-PEER)

The 21st century has seen a growing movement in the United States towards the adoption of engineering and technology as a complement to science education. Motivated by this shift, this article offers insights into engineering education for grades P-12, based on a landscape review of 263 empirical research studies spanning the two decades from January 2000 to June 2021. These insights are organized around three core themes: (1) students’ understandings, skills, and attitudes about engineering and technology; (2) effective methods of P-12 engineering education; and (3) benefits of P-12 engineering education. The insights are captured in the form of evidence-based …

Research Experiences Instrument: Validation Evidence For An Instrument To Assess The Research Experiences Of Engineering Ph.D. Students’ Professional Practice Opportunities, Eric A. Holloway, Kerrie A. Douglas, David F. Radcliffe, William C. Oakes

School of Mechanical Engineering Faculty Publications

Background. There are long-held concerns about how graduate research programs prepare engineering Ph.D. students for professional practice. Suitable instruments are lacking to effectively assess how research experiences contribute to the success of graduate students becoming professionals.

Purpose. The purpose of this work is to examine evidence of internal reliability and validity of using the Research Experiences Instrument (REI) scores as a measure of engineering Ph.D. students’ professional practice opportunities in their research experiences.

Method. REI was constructed using an ontological framework. REI was administered twice to engineering Ph.D. students, once to a single university (n = 236) and …

Transforming Technology & Engineering Educator Inputs Into Desired Student Outputs Through Mechanism Analysis And Synthesis, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide middle and high school Technology and Engineering Educators (T&EEs) with a more thorough understanding of an engineering approach to the teaching and learning of mechanics. During the teaching and learning of engineering content, in this case mechanics, the educator should attempt to align pedagogical content knowledge with engineering content knowledge and practices. T&EEs will also need to focus on terminology, structure, and applying theory to practical hands-on learning activities inside and outside of the classroom. T&EEs have the potential to foster middle and high school students’ mechanical knowledge and the ability to …

Enhancing Engineering Identity Among Boys Of Color, Jerrod Henderson, Virginia Snodgrass Rangel, James Holly Jr, Rick Greer, Mariam Manuel

Journal of Pre-College Engineering Education Research (J-PEER)

Black and Brown men continue to be underrepresented in engineering. One explanation for the dearth of Black and Latino men in engineering is that engineering (and STEM) identity often is not inclusive of People of Color. As a result, Black and Brown boys may be less likely to become interested in STEM subjects. The purpose of this study, then, was to investigate how the components of one afterschool engineering program tap into engineering identity formation among fourth- and fifth-grade Black and Brown boys. Leveraging research on the STEM and engineering identity, we argue that the program and its key components …

Stem For All Showcase Report, Bruce G. Bukiet, James M. Lipuma

STEM Month

This article and the associated STEM for all showcase submission video (https://www.youtube.com/watch?v=Clps427rdDc) was presented at the NSF 2021 STEM FOR ALL COVID, Equity & Social Justice Conference, May 11-18.

This article provides a description of the development of the STEM in your Home project in the STEM for Success initiative.

Collaborative Research: Audio For Inclusion: Uncovering The Narratives Of Minoritized Students To Provide Insight To Faculty On The Known Unknowns Of Inclusion, Cassandra Mccall

Funded Research Records

No abstract provided.

The Impact Of Cloud Computing On Academic Libraries, Sivankalai S

Library Philosophy and Practice (e-journal)

With the introduction of computers and other forms of communication technology, library services have undergone a significant transformation. Libraries have been automated, networked, and are currently being converted into virtual or paperless libraries. This article is dedicated to many aspects of cloud computing, including different kinds and applications. There is a discussion about the advantages and drawbacks of cloud computing in academic libraries. The article also includes recommendations for professional librarians and academic libraries across the globe on how to take advantage of cloud computing resources. This article may be of use in the development of cloud-based services for university …

Scope Process: Fostering Students' Design Outcome Effectiveness, Andrew J. Hughes, Cameron D. Denson

Educational Leadership & Technology Faculty Publications

The purpose of this article is to help Technology and Engineering Educators scaffold engineering design and problem-solving experiences so that students taking technology and engineering courses will develop an improved ability to design. Technology and Engineering Education seems to increasingly focus on problem-solving, design, and engineering. Technology and Engineering Education is not the only discipline with this focus. The fact that both Science and Technology and Engineering Education are similarly focused on the teaching and learning of engineering begs the question of what separates technology and engineering educators from science educators in the teaching of engineering? Lewis (2004) cautioned that …

Mechanism Design And Analysis: Developing An Understanding Of Mechanism Motion Through Graphical Modeling, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide Technology and Engineering Educators with foundational knowledge of mechanism design and analysis and the ability to develop middle and high school students' mechanism knowledge during practical hands-on learning activities in the STEM classroom. Technology and Engineering Educators' implementation of mechanism design and analysis could promote students' increased depth of mechanical knowledge and ability to apply this knowledge during engineering design challenges. In this article, the authors present an introduction to four-bar mechanism design and analysis using CAD software to produce graphical representations. After designing mechanisms graphical, students should be allowed to produce …

Sustainable Development And The Sdgs: Revealing Engineering Academics, Students And Employer Viewpoints, Una Beagon, Klara Kövesi, Brad Tabas, Bente Norgaard, Riitta Lehtinen, Brian Bowe, Christiane Gillet, Claus Spliid

Conference Papers

As the world’s focus turns to the future and not the present, the engineering profession must respond to the ever increasing need to bring about a sustainable future. The objective of this paper is to support the reform of engineering education by acknowledging and building upon the current awareness and understanding of sustainable development held by key stakeholders in the process.

This paper presents the outcomes of a study involving twelve focus groups with Academics, Employers and Students in four European countries (Denmark, Finland, France and Ireland) as part of the A-STEP 2030 European Project. Based on the findings, it …

The Identification Of Future Professional Skills For The Graduate Structural Engineer And The Co-Creation Of Their Definitions., Aimee Byrne, Una Beagon, Darren Carthy, Patrick Crean, Caitriona Depaor, Louise Lynch, Dervilla Niall

Conference Papers

Employers recognise that the future is changing and as such the structural engineer’s role is changing along with the skill set required. The skills gap has been acknowledged yet there is no consensus on which skills are most important for these engineers. This research presents the outcome of a project which proposes future professional skills needs for the structural engineer and the co-creation of their definitions. A review of the most recent relevant literature alongside chartership requirements of the Institution of Structural Engineers (IStructE) and Engineers Ireland (EI), as well as consideration of three seminal consultation and analysis reports on …

A Study Of Non-Computing Majors' Growth Mindset, Self-Efficacy And Perceived Cs Relevance In Cs1, Jae Hyuk Yoo

Master's Theses

As the demand for programming skills in today’s job market is rapidly increasing for disciplines outside of computing, CS courses have experienced spikes in enrollment for non-majors. Students in disciplines including art, design and biological sciences are now often required to take introductory CS courses. Previous research has shown the role of growth mindset, self-efficacy and relevance in student success within CS but such metrics are largely unknown for non-majors. In this thesis, we surveyed non-majors in CS1 at Cal Poly, San Luis Obispo during the early and late weeks of the quarter to gain insights on their growth mindset, …

Validation Of The Mathematics Motivation Questionnaire (Mmq) For Secondary School Students, Logan Fiorella, So Yoon Yoon, Kinnari Atit, Jason R. Power, Grace Panther, Sheryl Sorby, David H. Uttal, Norma Veurink

Michigan Tech Publications, Part 1

Background: Motivation is critical for supporting persistence and achievement in science, technology, engineering, and mathematics (STEM) disciplines. In this study, we focus on the assessment of mathematics motivation among secondary school students. We provide validity and reliability evidence for the Mathematics Motivation Questionnaire (MMQ)—adapted from the Science Motivation Questionnaire designed for college students—using data from 2551 secondary students from seven states across the United States. Results: Exploratory and confirmatory factor analyses confirmed five latent factors of the MMQ indicated by 19 items: intrinsic value, self-regulation, self-efficacy, utility value, and test anxiety. The nonlinear SEM reliability coefficients of the five constructs …

Attracting Diverse Talent To The Engineering Professions Of 2030 Activity 1 Outcomes, Una Beagon

Conference Papers

As the world’s focus turns to the future and not the present, the engineering profession must respond to the ever increasing need to bring about a sustainable future. The objective of this paper is to support the reform of engineering education by acknowledging and building upon the current awareness and understanding of sustainable development held by key stakeholders in the process.

This paper presents the outcomes of a study involving twelve focus groups with Academics, Employers and Students in four European countries (Denmark, Finland, France and Ireland) as part of the A-STEP 2030 European Project. Based on the findings, it …

A Mixed-Methods Approach To Explore Student Perceived Needs For Peer Mentorship In A College Of Engineering, Darcie Christensen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

“Nobody makes it alone. Nobody has made it alone” (NOVA SHRM & Dulles SHRM, 2012, p. 5). Mentoring generally has positive outcomes, such as increasing output, staying in work or school, increasing confidence, and others (Campbell & Campbell, 2007; Crisp & Cruz, 2009; Eby et al., 2008; NASEM, 2019; Pfund et al., 2016). This dissertation study focused on student perceived needs for peer mentorship in engineering, which can fill in gaps of traditional mentorship by pairing mentors and mentees at similar levels, increasing comfort and emotional support to mentees (Allen et al., 2017; Haggard et al., 2011; Kram & Isabella, …

Snr: Software Library For Introductory Robotics, Spencer F. Shaw

Master's Theses

This thesis introduces "SNR," a Python library for programming robotic systems in the context of introductory robotics courses. Greater demand for roboticists has pressured educational institutions to expand robotics curricula. Students are now more likely to take robotics courses earlier and with less prior programming experience. Students may be attempting to simultaneously learn a systems programming language, a library API, and robotics concepts. SNR is written purely in Python to present familiar semantics, eliminating one of these learning curves. Industry standard robotics libraries such as ROS often require additional build tools and configuration languages. Students in introductory courses frequently lack …

Biometric Features Modeling To Measure Students Engagement., Islam Mohamed Ahmed Mohamed Mahmoud Alkabbany

Electronic Theses and Dissertations

The ability to measure students’ engagement in an educational setting may improve student retention and academic success, revealing which students are disinterested, or which segments of a lesson are causing difficulties. This ability will facilitate timely intervention in both the learning and the teaching process in a variety of classroom settings. In this dissertation, an automatic students engagement measure is proposed through investigating three main engagement components of the engagement: the behavioural engagement, the emotional engagement and the cognitive engagement. The main goal of the proposed technology is to provide the instructors with a tool that could help them estimating …

Teaching Learning Newsletter Vol 1 Issue 3, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Investigating The Habits Of Mind Of Practicing Engineers, Theresa K. Green

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

One goal of undergraduate engineering education is to prepare students with the knowledge, skills, and decision-making strategies that are necessary for success in engineering practice. One proposed method to teach students these skills is to incorporate habits of mind into K-12 and undergraduate curricula. Habits of mind are the intelligent, social behaviors that engineers should aspire to have when solving problems, engaging with others, and dealing with uncertainty. Previous literature has suggested that incorporating ideas about habits of mind in educational curricula can teach students the disciplinary skills, technical knowledge, and social values that would help prepare them to enter …

Engineering Education Guilds: Understanding Their Vision For Innovation, Kaitlin Mallouk, Alexandra Coso Strong, Courtney June Faber, Darby Rose Riley

Henry M. Rowan College of Engineering Departmental Research

Engineering education guilds, such as the Consortium to Promote Reflection in Engineering Education (CPREE) and the Kern Entrepreneurial Engineering Network (KEEN), seek to work at the forefront of educational innovation by creating networks of instructor change agents who design and implement a particular innovation in their own context to further the professional formation of engineers (PFE). While many of the innovations facilitated by CPREE and KEEN have been published extensively, it is unclear how successful the propagation of reflection and entrepreneurial mindset has been in the engineering education community. The major aim of this project is to characterize these two …

Let’S Play! Gamifying Engineering Ethics Education Through The Development Of Competitive And Collaborative Activities, Michael F. Young, Landon Bassett, Daniel D. Burkey, Scott C. Streiner, Joshua Bourne Reed

Henry M. Rowan College of Engineering Departmental Research

Engineering ethics is an extremely important topic that needs to be focused on more in engineering curricula, as many of the projects that engineers work on have a profound impact on society. There are many pitfalls with the traditional ways in which ethics is taught to engineering students as an abstract philosophical topic, rather than personal decision making situated in complex real contexts. The three main approaches that are used for engineering ethics include being taught by a professor outside of the engineering space, being taught late in their curriculum such as during a senior capstone project, and being taught …

Engineering Ethics Through High-Impact Collaborative/Competitive Scenarios (E-Ethiccs), Scott C. Streiner, Daniel D. Burkey, Michael F. Young, Richard Tyler Cimino, Jennifer Pascal

Henry M. Rowan College of Engineering Departmental Research

Engineering grand challenges increasingly involve numerous social and ethical considerations that transcend the technical skills that dominate traditional engineering education. Engineering solutions often have major, long-lasting impacts on society. Since the process of technical innovation occurs in increasingly complex social exchanges, engineers are frequently confronted with social and ethical dilemmas in their professional lives. How do students acquire the skills needed to tackle these problems? The authors hypothesize that placing engineering challenges and solutions in a classroom context while emphasizing social engagement and impact facilitates the development of engineering students as moral agents who understand the consequences of their decisions. …

Impact Of Immersive Training On Senior Chemical Engineering Students' Prioritization Of Process Safety Decision Criteria, Jeffrey Stransky, Caleb Hill, Robert John Mcerlean, Jacob Willetts, Landon Bassett, Daniel D. Anastasio, Daniel D. Burkey, Matthew Cooper, Cheryl Bodnar

Henry M. Rowan College of Engineering Departmental Research

Every year new safety features and regulations are employed within the process industry to reduce risks associated with operations. Despite these advancements chemical plants remain hazardous places, and the role of the engineer will always involve risk mitigation through real time decision making. Results from a previous study by Kongsvik et al., 2015 indicated that there were three types of decisions in major chemical plants: strategic decisions, operational decisions, and instantaneous decisions. The study showed the importance for improving upon engineers’ operational and instantaneous choices when tasked with quick solutions in the workforce. In this research study, we dive deeper …