VLSI and Circuits, Embedded and Hardware Systems Commons^™

General Design Procedure For Free And Open-Source Hardware For Scientific Equipment, Shane W. Oberloier, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Distributed digital manufacturing of free and open-source scientific hardware (FOSH) used for scientific experiments has been shown to in general reduce the costs of scientific hardware by 90–99%. In part due to these cost savings, the manufacturing of scientific equipment is beginning to move away from a central paradigm of purchasing proprietary equipment to one in which scientists themselves download open-source designs, fabricate components with digital manufacturing technology, and then assemble the equipment themselves. This trend introduces a need for new formal design procedures that designers can follow when targeting this scientific audience. This study provides five steps in the …

Algorithm For Computational Imaging On A Real-Time Hardware, Manish Bhattarai

Electrical and Computer Engineering ETDs

DRAMATIC advances in the field of computational and medical imaging over the past decades have enabled many critical applications such as night vision, medical diagnosis, quality control, and remote sensing. The increasing demand for image quality and its fidelity requires an increase in pixel count and a sophisticated post-processing mechanism to efficiently store, transmit, and analyze this massive data. There is an inherent trade-off between the generation of big data by such imaging systems and efficiency in extraction of useful information within real-time constraints, limiting the efficacy of such sensors in real-time decision-making systems. The traditional imaging system gets burdened …

A Low Power High Speed Mobile Memory I/O Interface Using Reconfigurable Multi-Band Multi-Modulation Signaling, Yue Yu

Electrical Engineering Theses and Dissertations

This research mainly focuses on the design of a novel memory I/O interface with high bandwidth and high energy-efficient for mobile computing systems in order to dramatically enhance the circuit and system bandwidth and power efficiency. The proposed memory I/O interface, exploiting multi-modulation and multi-band signaling, is capable of supporting simultaneous bidirectional data transition of 4 separate data streams across a single-ended off-chip transmission line to achieve both high speed data rate and low power consumption. This multi-band multi-modulation interface (MMI) consists of multiple RF-band transceivers which utilize ASK modulation, and baseband transceivers which utilize 4-PAM modulation to increase the …

Asynchronous 3d (Async3d): Design Methodology And Analysis Of 3d Asynchronous Circuits, Francis Corpuz Sabado

Graduate Theses and Dissertations

This dissertation focuses on the application of 3D integrated circuit (IC) technology on asynchronous logic paradigms, mainly NULL Convention Logic (NCL) and Multi-Threshold NCL (MTNCL). It presents the Async3D tool flow and library for NCL and MTNCL 3D ICs. It also analyzes NCL and MTNCL circuits in 3D IC. Several FIR filter designs were implement in NCL, MTNCL, and synchronous architecture to compare synchronous and asynchronous circuits in 2D and 3D ICs. The designs were normalized based on performance and several metrics were measured for comparison. Area, interconnect length, power consumption, and power density were compared among NCL, MTNCL, and …

Design And Simulation Of An 8-Bit Successive Approximation Register Charge-Redistribution Analog-To-Digital Converter, Sumit K. Verma

Electrical Engineering Theses

The thesis initially investigates the history of the monolithic ADCs. The next chapter explores the different types of ADCs available in the market today. Next, the operation of a 4-bit SAR ADC has been studied. Based on this analysis, an 8-bit charge-redistribution SAR ADC has been designed and simulated with Multisim (National Instruments, Austin, TX). The design is divided into different blocks which are individually implemented and tested. Level-1 SPICE MOSFET models representative of 5μm devices were used wherever individual MOSFETs were used in the design. Finally, the power dissipation during the conversion period was also estimated. The supply voltage …

Virtual-Source Based Accurate Model For Predicting Noise Behavior At High Frequencies In Nanoscale Pmos Soi Transistors, Vaibhav R. Ramachandran, Saeed Mohammadi, Sutton Hathorn

The Summer Undergraduate Research Fellowship (SURF) Symposium

Complementary Metal Oxide Semiconductor (CMOS) technology at the nanometre scale is an excellent platform to implement monolithically integratedsystems because of the low cost of manufacturing and ease of integration. Newly developed CMOS Silicon on Insulator (SOI) transistors that are currentlydeveloped are suitable for use in radio frequency circuits. They find applications in many areas such as 5G telecommunication systems, high speed Wi-Fi andairport body-scanners. Unfortunately, the models for CMOS SOI transistors that are currently used in these circuits are inaccurate because of their complexity.The models currently used require the optimization of more than 200 variables. This paper aims to accurately …

Laser As A Tool To Study Radiation Effects In Cmos, Bahar Ajdari

Dissertations and Theses

Energetic particles from cosmic ray or terrestrial sources can strike sensitive areas of CMOS devices and cause soft errors. Understanding the effects of such interactions is crucial as the device technology advances, and chip reliability has become more important than ever. Particle accelerator testing has been the standard method to characterize the sensitivity of chips to single event upsets (SEUs). However, because of their costs and availability limitations, other techniques have been explored. Pulsed laser has been a successful tool for characterization of SEU behavior, but to this day, laser has not been recognized as a comparable method to beam …

Synthesis Of Linear Reversible Circuits And Exor-And-Based Circuits For Incompletely Specified Multi-Output Functions, Ben Schaeffer

Dissertations and Theses

At this time the synthesis of reversible circuits for quantum computing is an active area of research. In the most restrictive quantum computing models there are no ancilla lines and the quantum cost, or latency, of performing a reversible form of the AND gate, or Toffoli gate, increases exponentially with the number of input variables. In contrast, the quantum cost of performing any combination of reversible EXOR gates, or CNOT gates, on n input variables requires at most O(n^₂/log₂n) gates. It was under these conditions that EXOR-AND-EXOR, or EPOE, synthesis was developed.

In this …

Autonomous Speed Control For Kia Optima, Andrew J. Combs, Kyle Fugatt, Kevin Mcfall

The Kennesaw Journal of Undergraduate Research

The standard method for speed control is the cruise control system built into most modern vehicles. These systems employ a PID controller which actuates the accelerator thus, in turn, maintains the desired vehicle speed. The main drawback of such a system is that typically the cruise control will only engage above 25 mph. The goal of this paper is to describe a system which we used to control vehicle speed from a stop to any desired speed using an Arduino microcontroller and a CAN BUS shield, from where autonomous features can be built upon. With this system, we were able …

Early Layout Design Exploration In Tsv-Based 3d Integrated Circuits, Mohammad Abrar Ahmed

Dissertations and Theses

Through silicon via (TSV) based 3D integrated circuits have inspired a novel design paradigm which explores the vertical dimension, in order to alleviate the performance and power limitations associated with long interconnects in 2D circuits. TSVs enable vertical interconnects across stacked and thinned dies in 3D-IC designs, resulting in reduced wirelength, footprint, faster speed, improved bandwidth, and lesser routing congestion. However, the usage of TSVs itself gives rise to many critical design challenges towards the minimization of chip delay and power consumption. Therefore, realization of the benefits of 3D ICs necessitates an early and realistic prediction of circuit performance during …

Remote Cable Gantry, Allen L. Bailey

Electrical Engineering

The Remote Cable Gantry is a robotic system that was initially intended to aid in the art of aerial videography. It was designed to enable novice and expert users alike to capture both video footage and audio from perspectives unachievable by current methods. This system uses a series of cables to control the position of a camera gimbal in a defined 3D space and, as a self-contained unit, is portable and easy to use. The Remote Cable Gantry offers a quiet, intuitive, and safe alternative to existing technology, which has been limiting the market and potential of aerial photography and …

Music Synthesizer Senior Project: Danalog, Vikrant A. Marathe

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens. The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Danalog: Digital Music Synthesizer, Evan R. Lew

Electrical Engineering

The Danalog is a 25 key portable digital music synthesizer that uses multiple synthesis methods and effects to generate sounds. Sound varieties included three synthesis methods including FM, subtractive, and sample-based, with up to eight adjustable parameters, at least four effects, including reverb, chorus, and flange, with five adjustable parameters, and at least two note polyphony, and a five band equalizer. The user would be able to adjust these effects using digital encoders and potentiometers and view the settings on two LCD screens.

The finals project was unable to meet the original design requirements. The FM synthesis method was primarily …

Logic Tiles, Andrew Wheeler, Tristan Lennertz

Computer Engineering

This project was originally conceived by Professor Andrew Danowitz as he considered the restructuring of the introductory digital design course at Cal Poly. As it stands now, students apply their knowledge of boolean algebra and combinatorial logic through the programming of a Field Programmable Gate Array (FPGA) using a Hardware Descriptive Language (HDL). While this is the industry standard for designing large, complex digital circuits, and is an fundamental skill to learn, there is a lack of actual circuit building in the process that can cause a disconnect from theory to application for students who have little-to-no experience with digital …

Wireless Audio Bridge, Daniel L. Hodges

Electrical Engineering

Bluetooth, a wireless technology standard used to exchange data using radio transmissions, has made a significant impact on the audio technology industry, specifically the way people listen to music. This technology enables a wireless listening experience, eliminating the need for wires or cables between audio devices as previously required. Audio can transmit from a cellphone or laptop (an output device) to a pair of headphones or speakers (an input device) without any physical connection. Compared to alternative wireless listening solutions (i.e. FM transmitter, radio broadcast), Bluetooth offers greater reliability, audio fidelity, portability, and ease of use. To obtain this functionality, …

Smart Safeguard, Stephen J. Marrone

Electrical Engineering

Smart Safeguard is designed to provide people with an affordable device that will notify the authorities when the buyer gets in a car crash. The device will operate off the 12V car power that is present in every car and use an accelerometer to detect if an accident has occurred. If an accident is detected the device will proceed to light up and make a noise until the passenger pushes a button on the device. If the passenger doesn’t push the button within 15 seconds the device, which is wirelessly connected to the passenger’s phone, will initiate a text to …

Music Synthesizer Senior Project: Individual Report, Bryan Bellin

Electrical Engineering

No abstract provided.

Investigating Read/Write Aggregation To Exploit Power Reduction Opportunities Using Dual Supply Voltages, Gu Yunfei

McKelvey School of Engineering Graduate Student Theses & Dissertations

Power consumption plays an important role in computer system design today. On-chip memory structures such as multi-level cache make up a significant proportion of total power consumption of CPU or Application-Specific Integrated Circuit (AISC) chip, especially for memory-intensive application, such as floating-point computation and machine learning algorithm. Therefore, there is a clear motivation to reduce power consumption of these memory structures that are mostly consisting of Static Random-Access Memory (SRAM) blocks. In this defense, I will present the framework of a novel dual-supply-voltage scheme that uses separate voltage levels for memory read and write operations. By quantitatively analyzing the cache …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Implementation Of Range Autofocus For Sar Radar Imaging, Nicholas J. Testin, Philip Davis

KSU Journey Honors College Capstones and Theses

The range calculation for an FMCW radar depends on accurate linear modulation. In some circumstances, linear modulation may not be available and must be corrected for. This paper describes an autofocus technique used to correct for phase error due to non-linearities in the components of a FMCW radar. Also described here is the algorithm used in calculating the phase error and application of the phase correction with triangle modulation. Known errors were calculated at certain distances and applied to correcting the phase of data taken at similar distances. The results given were generated using a SAR working outside linear ranges.

Project Pradio, Trigg T. La Tour

Computer Science and Computer Engineering Undergraduate Honors Theses

This paper examines the design and manufacturing of a device that allows two or more users to share a wireless audio stream. Effectively, this allows a group of people to listen to the same audio in a synchronized manner. The product was unable to be completed in the allotted time. Regardless, significant progress was made and valuable insight into the circuit board design process was gained.

Design Of A Folded Cascode Operational Amplifier In A 1.2 Micron Silicon-Carbide Cmos Process, Kyle Addington

Electrical Engineering Undergraduate Honors Theses

This thesis covers the design of a Folded Cascode CMOS Operational Amplifier (Op-Amp) in Raytheon’s 1.2-micron Silicon Carbide (SiC) process. The use of silicon-carbide as a material for integrated circuits (ICs) is gaining popularity due to its ability to function at high temperatures outside the range of typical silicon ICs. The goal of this design was to create an operational amplifier suitable for use in a high temperature analog-to-digital converter application. The amplifier has been designed to have a DC gain of 50dB, a phase margin of 50 degrees, and a bandwidth of 2 MHz. The circuit’s application includes input …

Short-Circuit Protection For Low-Voltage Dc Distribution Systems Based On Solid-State Circuit Breakers, Sharthak Munasib

Graduate Theses and Dissertations

Proper short-circuit protection in dc distribution systems has provided an austere challenge to researchers as the development of commercially-viable equipment providing fast operation, coordination and reliability still continues. The objective of this thesis is to analyze issues associated with short-circuit protection of low-voltage dc (LVDC) distribution systems and propose a short-circuit protection methodology based on solid-state circuit breakers (SSCBs) that provides fault-current limiting (FCL). Simulation results for a simplified notional 1-kVdc distribution system, performed in MATLAB/SIMULINKTM, would be presented to illustrate that SSCB solutions based on reverse-blocking integrated gate-commutated thyristors (RB-IGCT) are feasible for low-voltage dc distribution systems but requires …

Design And Test Of A Gate Driver With Variable Drive And Self-Test Capability Implemented In A Silicon Carbide Cmos Process, Matthew Barlow

Graduate Theses and Dissertations

Discrete silicon carbide (SiC) power devices have long demonstrated abilities that outpace those of standard silicon (Si) parts. The improved physical characteristics allow for faster switching, lower on-resistance, and temperature performance. The capabilities unleashed by these devices allow for higher efficiency switch-mode converters as well as the advance of power electronics into new high-temperature regimes previously unimaginable with silicon devices. While SiC power devices have reached a relative level of maturity, recent work has pushed the temperature boundaries of control electronics further with silicon carbide integrated circuits.

The primary requirement to ensure rapid switching of power MOSFETs was a gate …

Hexarray: A Novel Self-Reconfigurable Hardware System, Fady Hussein

Boise State University Theses and Dissertations

Evolvable hardware (EHW) is a powerful autonomous system for adapting and finding solutions within a changing environment. EHW consists of two main components: a reconfigurable hardware core and an evolutionary algorithm. The majority of prior research focuses on improving either the reconfigurable hardware or the evolutionary algorithm in place, but not both. Thus, current implementations suffer from being application oriented and having slow reconfiguration times, low efficiencies, and less routing flexibility. In this work, a novel evolvable hardware platform is proposed that combines a novel reconfigurable hardware core and a novel evolutionary algorithm.

The proposed reconfigurable hardware core is a …

Silicon Germanium Bicmos Comparator Designed For Use In An Extreme Environment Analog To Digital Converter, Benjamin Riley Sissons

Graduate Theses and Dissertations

This thesis demonstrates the process of creating a radiation hardened and extreme temperature operating comparator from start to finish in the 90 nm SiGe 9HP process node. This includes the entire design flow from examining comparator topologies, to designing the initial comparator circuits, to simulating the comparator over a temperature range of -196°C to 125°C, and finally the testing of the fabricated circuit. To verify the circuit would work at low temperatures, several new device models were created that could be used for simulations at -196°C. In addition to its properties as a standalone comparator, the circuit was also used …

The Effect Of Power Supply Ramp Time On Sram Puf's, Abdelrahman T. Elshafiey Mr.

Electrical and Computer Engineering ETDs

Physical unclonable functions (PUFs) are security primitives that exploit the device mismatches. PUFs are a promising solution for hardware cryptography and key storage. They are used in many security applications including identification, authentication and key generation. SRAM is one of the popular implementations of PUFs. SRAM PUFs offer the advantage, over other PUF constructions, of reusing resources (memories) that already exist in many designs.

In this thesis, for the first time, it is demonstrated that the start-up value of an SRAM PUF could be different depending on the SRAM power supply rising time. An analytical model has been developed to …

Securing Database Users From The Threat Of Sql Injection Attacks, Nisharg Shah

Electrical Engineering Theses and Dissertations

In the 21^st century, there has been a significant rise in dependency on the Internet for daily activities. Web applications such as online banking, web-based emails, social networking, and many more services have become an instant means of communication. These web applications and the data to which they have access are often targeted using malicious attacks, including SQL (Structured Query Language) Injection Attacks (from now on referenced as SQLIAs), which may cause serious damage. In particular, attackers use SQLIAs to target interactive web applications that incorporate database services. In a SQLIA, an attacker can insert malicious SQL code as …

Quadded Gasp: A Fault Tolerant Asynchronous Design, Kristopher S. Scheiblauer

Dissertations and Theses

As device scaling continues, process variability and defect densities are becoming increasingly challenging for circuit designers to contend with. Variability reduces timing margins, making it difficult and time consuming to meet design specifications. Defects can cause degraded performance or incorrect operation resulting in circuit failure. Consequently test times are lengthened and production yields are reduced.

This work assess the combination of two concepts, self-timed asynchronous design and fault tolerance, as a possible solution to both variability and defects. Asynchronous design is not as sensitive to variability as synchronous, while fault tolerance allows continued functional operation in the presence of defects. …

Substrate Integrated E-Plane Horn Antenna And Antenna Array, Zhewei Gu

All Graduate Theses, Dissertations, and Other Capstone Projects

In this paper, a novel SMA fed substrate integrated E-plane horn antenna and antenna array are proposed. The substrate integrated E-plane waveguide (SIEW) is not only able to integrate conventional waveguide circuits on printed circuit boards (PCB), but also especially falls into all E-plane circuits which substrate integrated waveguide (SIW) technique fails to. Essential copper strips are sandwiched in the middle by two PCBs to support longitudinal current in the E-plane fed through an SIEW-to-SMA transition. Copper plated holes aligned along the wave propagation direction are drilled through the substrate and copper strips, so that vertical current in the H-plane …