Power and Energy Commons^™

The Ntp Anode For Aqueous Sodium Ion Batteries: Recent Advances And Future Perspectives, Ming-Li Wang, Xue-Ying Su, Zheng-Xiang Shan, Shu-Zhe Yang, Heng-Rui Guo, Hao Luo, Dong-Liang Chao

Journal of Electrochemistry

Aqueous sodium-ion batteries (ASIBs) have attracted great attention in aqueous batteries due to their merit of high safety. However, the constrained work potential and insufficient chemical stability of anode materials in aqueous electrolytes hinder the large-scale application of ASIBs. Sodium titanium phosphate, NaTi₂(PO₄)₃ (NTP), is considered one of the most promising anode materials for ASIBs due to its excellent electrochemical performance and tunable structure. Recently, great achievements have been made in the development of NTP, however, a comprehensive review of existing studies is still lacking. This article firstly introduces the basic properties of NTP and …

A Full Polymer Piezoelectric Flextensional Energy Harvester, Nadia Ahbab, Sidra Naz, Bingqi Zhao, Tian-Bing Xu

Mechanical & Aerospace Engineering Faculty Publications

This study presents a full polymer piezoelectric flextensional energy harvester (FPPFEH) comprising a single-layer poly(vinylidene fluoride) (PVDF) film bonded to a 3D-printed polylactic acid (PLA) flextensional frame. For an arm inclination angle of θ=10°, the free-body model gives a theoretical geometric force-amplification factor of M_F=cot θ ≈ 5.67; this value represents an ideal upper bound and was not independently validated by local force or strain measurements. During assembly, the film was tensioned only to remove visible slack and maintain a flat configuration. No intentional pretension was applied, and any residual tension was not measured. Off-resonance force-controlled tests showed …

Characterization And Profile Considerations Of Nickel-Zinc Energy Storage Under High-Power And Pulsed Loads, Benjamin P. Schmitz

Electrical Engineering Theses - Archive

There are many types of energy storage devices that are available for driving high-power electrical loads. Choosing the right chemistry is difficult and factors such as energy density, power density, safety, cycle life, and recharge rate are among the many that must be considered. Lithium-ion batteries (LIB) possess the highest combined power and energy density, making them an attractive option for many applications. Previous studies at the Pulsed Power and Energy Lab (PPEL) characterized lithium-iron-phosphate (LFP) and lithium-titanate-oxide (LTO) battery chemistries. LFP’s and LTO’s have modest power density, modest energy density and modest cycle life. However, there is still potential …

High-Fidelity Soh Prediction In Lithium-Ion Batteries Using Hybrid Ml Networks, Shafiyee Islam, Gon Namkoong

Electrical & Computer Engineering Faculty Publications

Accurate and efficient prediction of lithium-ion battery state of health (SOH) is critical for ensuring reliability in electric vehicles, grid storage, and aerospace systems. Traditional SOH estimation methods often struggle with nonlinear degradation behaviors and lack sensitivity to subtle electrochemical signals, limiting their real-world deployment. To address these challenges, this study examines hybrid deep learning models that integrate differential capacity (dQ/dV) analysis to enhance predictive accuracy. Four hybrid architectures - hybrid CNN-LSTM multihead, CNN extractor for LSTM, DNN-LSTM, and DNN Bi-LSTM - were developed and evaluated using the NASA randomized battery usage dataset, offering a realistic benchmark under diverse operational …

Quantum-Powered Battery Scheduling In Modern Distribution Grids, Diba Ehsani

Electronic Theses and Dissertations

The rising need for exploiting a novel and evolved computation is an increasing concern in the power distribution system to address the exponential growth of distribution-connected devices. Scheduling numerous battery energy storage systems in an optimal way is one of the emerging challenges that will be more noticeable as the number of batteries, including residential, community, and vehicle batteries, increases in the grid. This thesis focuses on this topic and offers a necessary component in building the quantum-compatible distribution system of the future. Using a constrained quadratic model (CQM) on D-Wave’s hybrid solver as well as a binary quadratic model …

Comparative Analysis Of Ac Coupled And Dc Coupled Microgrids: Analyzing Electrical Performances And Economics, Sanjeev Kumar

Cal Poly Humboldt theses and projects

This study compares the electrical performance and economics of DC-coupled and AC-coupled community microgrid configurations through simulation and financial modeling of the Redwood Coast Airport Microgrid (RCAM), which integrates 2.2 MW of solar PV and 2.2 MW of battery storage. Unified load flow, short circuit, transient stability (including load impact), and efficiency studies using ETAP & SAM software tools demonstrate that the DC-coupled configuration is preferred based on efficiency, while both configurations exhibit equivalent performance with respect to selected power quality metrics. The DC setup exhibits 11% higher overall efficiency than AC coupling in converting solar energy to grid exports. …

Joint Bidding Decision Of Wind Farms And Energy Storage Based On Newsvendor Model, Xinyue Sun, Jian Liu, Meng Ou, Yanyan Liu

Electrical and Computer Engineering Faculty Research & Creative Works

Currently, renewable energy generation has received more and more attention. This article focuses on wind energy generation, one of the renewable energy sources. Aiming at the intermittent and unpredictable wind power problems, according to the day ahead bidding mechanism in the power market, this paper introduces the energy storage system to maximize wind power merchants profit based on the newsvendor model. First, this paper focuses on the wind farms combined with storage system to put forward the optimal bidding decision of selling or buying electricity to the market one day in advance and the optimal bidding amount. Then, we analyze …

Sizing Considerations For Ev Dynamic Wireless Charging Systems With Integrated Energy Storage, Donovin Lewis, Huangjie Gong, Gregory D. Erhardt, Rong Zeng, Omer Onar, Veda Prakash Galigekere, Burak Ozpineci, Dan Ionel

Power and Energy Institute of Kentucky Faculty Publications

Roadways with dynamic wireless charging systems (DWCS) enable charge-sustaining in-motion EV charging, which can reduce charging idle time while increasing range capabilities. Spatially distributed transmitter coils are controlled in response to traffic load that varies significantly minute to minute with high power levels, very short charging time, and low system utilization like wind turbine power. Traffic load estimation and localized analysis may guide effective sizing and topology adoption for feasible and scalable DWCS deployment. DWCS traffic load approximation is reviewed with measured Automated Traffic Recorder (ATR) data and statistical distributions being used to create a synthetic load analyzed using proposed …

Equivalent Electric And Heat-Pump Water Heater Models For Aggregated Community-Level Demand Response Virtual Power Plant Controls, Huangjie Gong, Tim Rooney, Oluwaseun M. Akeyo, Brian T. Branecky, Dan M. Ionel

Electrical and Computer Engineering Faculty Publications

Advanced control techniques may be used to establish a virtual power plant to regulate the operation of electric water heaters, which may be regarded as a “uni-directional battery” and a major component of a hybrid residential energy storage system. In order to estimate the potential of regulating water heaters at the aggregated level, factors including user behavior, number of water heaters, and types of water heaters must be considered. This study develops generic water heater load curves based on the data retrieved from large experimental projects for resistive electric water heaters (EWHs) and heat pump water heaters (HPWHs). A community-level …

Multi-Objective Optimization For Aircraft Power Systems Using A Network Graph Representation, Damien Lawhorn, Vandana Rallabandi, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Today, the electrification of flight is more popular than ever, creating a wide array of concept aircraft and associated power system topologies. In order to gain insights into benefits of these varying architectures, this paper introduces the development of a framework for electric aircraft power system (EAPS) optimization. The proposed framework accepts inputs from a designer in the form of component parameters and desired flight mission characteristics. A collective graph representing many possible architectures is formed, from which, subgraphs that describe power system topologies meeting the flight requirements are extracted and analyzed. Optimal EAPS architectures with respect to goals of …

Optimal Sizing And Operation Of A Pumped Thermal Energy Storage System, Matthew Perez

Electronic Theses and Dissertations

Current trends in the modern grid are leading to the integration of energy storage technologies (ESSs), such as pumped thermal energy storage to help incorporate more variable renewable energy sources into the grid. This paper analyzes the operation of a pumped thermal energy storage (PTES) system under the grid services of energy arbitrage, regulation services, spinning and non-spinning reserve, resource adequacy, and a combination of them all. Each revenue stream is setup into an optimization problem and solved to find which revenue generating technique would generate the most revenue. The combined revenue stream was found to produce the most revenue …

Molecular To Macroscopic Understanding Of Chloroaluminate Anion Intercalation In Rechargeable Aluminum-Graphite Batteries, Jeffrey Xu

Dissertations and Theses

Today’s global energy challenges pose an urgent need to electrify transportation and better store intermittent renewable energy sources (e.g., solar and wind energy). For such large-scale battery applications, aluminum batteries are a promising “beyond lithium-ion” technology due to the high volumetric capacity, earth abundance, low-cost, and inherent safety of aluminum metal. However, there are very few compatible positive electrode materials that exhibit high energy density and cycling stability, in part due to the challenges of electrochemically intercalating highly charged Al³⁺ cations. Recently, graphite has been demonstrated as a promising positive electrode material in non-aqueous rechargeable aluminum batteries, which store …

Intelligent Data-Driven Energy Flow Controllers For Renewable Energy And Electrified Transportation Systems, Juan Rafael Nunez Forestieri

LSU Doctoral Dissertations

In recent years, large scale deployments of electrical energy generation using renewable sources (RES) such as wind, solar and ocean wave power, along with more sustainable means of transformation have emerged in response to different initiatives oriented toward reducing greenhouse gas emissions. Strategies facilitating the integration of renewable generation into the grid and electric propulsion in transportation systems are proposed in this work.

Chapter 2 investigates the grid-connected operation of a wave energy converter (WEC) along with a hybrid supercapacitor/undersea energy storage system (HESS). A combined sizing and energy management strategy (EMS) based on reinforcement learning (RL) is proposed. Comparisons …

The Design And Analysis Of Large Solar Pv Farm Configurations With Dc Connected Battery Systems, Oluwaseun M. Akeyo, Vandana Rallabandi, Nicholas Jewell, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Typically, solar inverters curtail or “clip” the available power from the PV system when it exceeds the maximum ac capacity. This paper discusses a battery system connected to the dc-link of an inverter to recuperate this PV energy. Contrary to conventional approaches, which employ two dc-dc converters, one each for the battery and solar PV system, the proposed configuration utilizes a single dc-dc converter capable of simultaneously operating as a charge controller and a maximum power point tracking (MPPT) tracking device. In addition to improving the overall system capacity factor, increasing the conversion efficiencies and ensuring MPPT stability, the proposed …

Experimental Evaluation Of Medium-Voltage Cascode Gallium Nitride (Gan) Devices For Bidirectional Dc–Dc Converters, Salah Salem H. Alharbi

Electronic Theses and Dissertations

As renewable energy sources, such as photovoltaic (PV) cells and wind turbines, are rapidly implemented in DC microgrids, energy storage systems play an increasingly significant role in ensuring uninterrupted power supply and in supporting the reliability and stability of microgrid operations. Power electronics, especially bidirectional DC–DC converters, are essential parts in distributed energy storage and alternative energy systems because of their grid synchronization, DC power management, and bidirectional power flow capabilities. While there is increasing demand for more efficient, compact, and reliable power converters in numerous applications, most existing power converters are hindered by traditional silicon (Si) based semiconductors, which …

Optimal Sizing Of Energy Storage With Embedded Wind Power Generation, Nicholas Roche, Jane Courtney

Articles

Energy storage technologies are key to increased penetration of renewable energies on the distribution system. Not only do they increase availability of energy, but they contribute to the overall reliability of the system. However, the cost of large-scale storage systems can often be prohibitive, and storage needs to be sized appropriately, both to fill the energy gaps inevitable in renewable energies such as wind and to minimize costs. In this work, a Monte Carlo Simulation is performed to optimally size an energy storage system while minimizing overall system cost. 30 years of historical wind speed data are used to model …

Surface And Structure Engineering For Next Generation Lithium Metal Batteries, Ke Chen

Electronic Theses and Dissertations

Lithium (Li) metal has been considered as one of the most promising anode materials to replace conventional graphite for Li-ion battery due to its high theoretical capacity (3860 mAh g-1) and low electrochemical potential (-3.04 V vs standard hydrogen electrode). However, it still faces some problems such as unstable solid electrolyte interphase (SEI), uncontrolled Li dendrites growth, and infinite volume change during battery charging/discharging. To develop a stable and low-cost Li metal anode for next-generation Li metal battery, in this dissertation, we have made efforts to understand and solve these problems in two aspects, by introducing an artificial SEI and …

An Intelligent Controlling Method For Battery Lifetime Increment Using State Of Charge Estimation In Pv-Battery Hybrid System, Md Ohirul Qays, Yonis Buswig, Hazrul Basri, Md Liton Hussain, Ahmed Abu-Siada, Md Momtazur Rahman, S. M. Muyeen

Research outputs 2014 to 2021

In a photovoltaic (PV)-battery integrated system, the battery undergoes frequent charging and discharging cycles that reduces its operational life and affects its performance considerably. As such, an intelligent power control approach for a PV-battery standalone system is proposed in this paper to improve the reliability of the battery along its operational life. The proposed control strategy works in two regulatory modes: maximum power point tracking (MPPT) mode and battery management system (BMS) mode. The novel controller tracks and harvests the maximum available power from the solar cells under different atmospheric conditions via MPPT scheme. On the other hand, the state …

Optimal Allocation Of Energy Storage And Wind Generation In Power Distribution Systems, Carlos Mendoza

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

The advent of energy storage technologies applications for the electric power system gives new tools for planners to cope with the operation challenges that come from the integration of renewable generation in medium voltage networks. This work proposes and implements an optimization model for Battery Energy Storage System (BESS) and distributed generation allocation in radial distribution networks. The formulation aims to assist distribution system operators in the task of making decisions on energy storage investment, BESSs' operation, and distributed generation penetration's level to minimize electricity costs. The BESSs are required to participate in energy arbitrage and voltage control. In addition, …

Measurement And Estimation Of The Equivalent Circuit Parameters For Multi-Mw Battery Systems, Oluwaseun M. Akeyo, Vandana Rallabandi, Nicholas Jewell, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper proposes and validates through simulations and measurements, a procedure for the determining the equivalent circuit parameters of large utility-scale batteries. It is considered that a large battery includes multiple cells connected in series and parallel, and therefore, its equivalent circuit can be represented as a series-parallel network of state of charge (SOC) dependent resistors and capacitors. Tests for determining these equivalent circuit parameters are proposed. These tests involve subjecting the battery energy storage system (BESS) to multiple charge and discharge cycles, while monitoring the terminal voltage and current response. A method for post-processing and analyzing the measurements in …

Modeling And Simulation Of A Utility-Scale Battery Energy Storage System, Oluwaseun M. Akeyo, Vandana Rallabandi, Nicholas Jewell, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper presents the modeling and simulation study of a utility-scale MW level Li-ion based battery energy storage system (BESS). A runtime equivalent circuit model, including the terminal voltage variation as a function of the state of charge and current, connected to a bidirectional power conversion system (PCS), was developed based on measurements from an operational utility-scale battery demonstrator. The accelerated response of the battery unit was verified by pulse discharging it from maximum to minimum SOC and its application for grid resiliency was demonstrated through an example droop control frequency response. For the purpose of validating the equivalent BESS …

Incorporating Battery Energy Storage Systems Into Multi-Mw Grid Connected Pv Systems, Vandana Rallabandi, Oluwaseun M. Akeyo, Nicholas Jewell, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper analyzes the configuration, design, and operation of multi-MW grid connected solar photovoltaic (PV) systems with practical test cases provided by a 10-MW field development. In order to improve the capacity factor, the PV system operates at its maximum power point during periods of lower irradiance, and the power output is limited to a rated value at high irradiance. The proposed configuration also incorporates a utility scale battery energy storage system (BESS) connected to the grid through an independent inverter and benefits of the experience gained with a 1-MW 2-MWh BESS large demonstrator. The BESS power smoothing and frequency …

A Sustainable Prototype For Renewable Energy: Optimized Prime-Power Generator Solar Array Replacement, Nathan Thomsen, Torrey J. Wagner, Andrew J. Hoisington, Steven J. Schuldt

Faculty Publications

Remote locations such as disaster relief camps, isolated arctic communities, and military forward operating bases are disconnected from traditional power grids forcing them to rely on diesel generators with a total installed capacity of 10,000 MW worldwide. The generators require a constant resupply of fuel, resulting in increased operating costs, negative environmental impacts, and challenging fuel logistics. To enhance remote site sustainability, planners can develop stand-alone photovoltaic-battery systems to replace existing prime power generators. This paper presents the development of a novel cost-performance model capable of optimizing solar array and Li-ion battery storage size by generating tradeoffs between minimizing initial …

Recent Progress In Organic Redox Flow Batteries, Li-Xing Xia, Hao Liu, Lin Liu, Zhan-Ao Tan

Journal of Electrochemistry

Redox flow batteries (RFBs) are promising candidate for balancing instability of grids caused by integration of intermittent renewable energies such as solar energy and wind energy. Along with wide deployments in solar energy and wind energy due to abundance and declining installation cost, it can be predicted that RFBs will enter a period of rapid development. Basically,RFBs are electrochemical energy storage devices that decouple energy and power of the system by storing liquid electrolyte in tanks outside battery system itself. Such a unique framework makes RFBs flexible and fulfills the various demands of grids. During battery operation, redox-active species are …

Power Utility Tests For Multi-Mw High Energy Batteries, Oluwaseun M. Akeyo, Huangjie Gong, Vandana Rallabandi, Nicholas Jewell, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

This paper reviews the procedures, layouts and metrics described in the new test manual issued by the Electric Power Research Institute (EPRI), in order to determine the performance and functionality of a utility scale battery energy storage system (BESS). In this approach, the large battery unit is connected to the dc-link of a bidirectional power conversion system (PCS), which may be interfaced with either the utility grid or a load bank for the purpose of estimating the BESS operation and performance characteristics, some of which includes; available charge/discharge energy at rated power, continuous charge/discharge duration, battery ramp rate, and ac …

Improving The Capacity Factor And Stability Of Multi-Mw Grid Connected Pv Systems With Results From A 1mw/2mwh Battery Demonstrator, Oluwaseun M. Akeyo, Vandana Rallabandi, Nicholas Jewell, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Conventional PV systems integrated with a battery connect the array and the energy storage unit to a dc-link through individual dc-dc converters for maximum power point tracking (MPPT) and battery charge control. This paper proposes a new system configuration, which connects the PV array and battery unit to the dc-link of the system inverter via a single dc-dc converter capable of simultaneously operating as a charge controller and MPPT device. This dc-dc converter is controlled such that it charges/discharges the battery with the amount of power required to maintain the PV array at its MPPT reference voltage. The proposed system …

Photovoltaic System Optimization For An Austere Location Using Time Series Data, Torrey J. Wagner, Eric Lang, Warren Assink, Douglas S. Dudis

Faculty Publications

In this work we test experimental photovoltaic, storage and generator technologies and investigate their potential to meet austere location energy needs. After defining the energy requirements and insolation of a 1,100-person base, we develop a microgrid model and simulation. Cost optimizations were then performed using hourly time-series data to explore the cost and performance trade-space of a PV-battery-generator system. The work highlights the cost of resiliency and the dependencies of optimum system component sizes on duration and the fully burdened cost of fuel.

Conjugated Dynamic Modeling On Vanadium Redox Flow Battery With Non-Constant Variance For Renewable Power Plant Applications, Abu Nayem Md. Asraf Siddiquee

Student Theses and Dissertations

A parametric modeling study has been carried out to assess the impact of change in operating parameters on the performance of Vanadium Redox Flow Battery (VRFB). The objective of this research is to develop a computer program to predict the dynamic behavior of VRFB combining fluid mechanics, reaction kinetics, and electric circuit. The computer program was developed using Maple 2015 and calculations were made at different operating parameters. Modeling results show that the discharging time increases from 2.2 hours to 6.7 hours when the concentration of V2+ in electrolytes increases from 1M to 3M. The operation time during the charging …

Microgrid Energy Management With Flexibility Constraints: A Data-Driven Solution Method, Okan Ciftci

LSU Master's Theses

Microgrid energy management is a challenging and important problem in modern power systems. Several deterministic and stochastic models have been proposed in the literature for the microgrid energy management problem. However, more accurate models are required to enhance flexibility of the microgrids when accounting for renewable energy and load uncertainties. This thesis proposes key contributions to solve the energy management problem for smart building (or small-scale microgrid). In Chapter 3, a deterministic energy management model is presented taking into account system flexibility requirements. Energy storage systems are deployed to enhance the grid flexibility and ramping capability. The objective function of …

Multi-Mw Solar Pv Pumping System With Capacity Modulation And Battery Voltage Support, Oluwaseun M. Akeyo, Vandana Rallabandi, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Solar photovoltaic (PV) renewable energy systems are undergoing major technological developments and large-scale field deployment and electric grid integration. This paper proposes a method of expanding the capacity of an existing irrigation farm with additional pumps powered by solar PV. The system includes PV arrays and battery energy storage connected to a common dc bus, which energizes an array of variable speed inverter driven pumps. Capacity modulation is achieved by energizing an optimal number of pumps required in order to meet a particular load demand with minimum supply energy. A grid connection to the dc bus of the power electronic …