Power and Energy Commons^™

Multi-Criteria Performance Evaluation And Control In Power And Energy Systems, Payam Ramezani Badr

All Dissertations

The role of intuition and human preferences are often overlooked in autonomous control of power and energy systems. However, the growing operational diversity of many systems such as microgrids, electric/hybrid-electric vehicles and maritime vessels has created a need for more flexible control and optimization methods. In order to develop such flexible control methods, the role of human decision makers and their desired performance metrics must be studied in power and energy systems. This dissertation investigates the concept of multi-criteria decision making as a gateway to integrate human decision makers and their opinions into complex mathematical control laws. There are two …

Stability Analysis And Design Of Grid-Interactive Power Electronic Converters, Le Kong

Doctoral Dissertations

The increasing penetration of power electronic converters (PECs) can provide high flexibility, full controllability, sustainability, and improved efficiency for future electric power systems. However, it also introduces new challenges since the wide-frequency-band control dynamics of PECs can interact with the power system and result in different types of instability issues. To holistically address the instability issues, several research activities are conducted in this dissertation.

The modular multilevel converter (MMC), which is one of the most common PECs in high- or medium-voltage power systems, is investigated. An improved MMC dc impedance model is developed by considering both the submodule voltage and …

Efficient Control Approaches For Guaranteed Frequency Performance In Power Systems, Samaneh Morovati

Doctoral Dissertations

Due to high penetration of renewable energy, converter-interfaced sources are increasing in power systems and degrading the grid frequency response. Synthetic inertia emulation and guaranteed primary frequency response is a challenging task. Still, there is high potential for application of highly controllable converter-interfaced devices to help performance. Renewable energy sources and demand side smart devices also need to be equipped with innovative frequency control approaches that contribute to frequency regulation operations.

First, the wind turbine generator is chosen to represent an example of a converter- interfaced source. An augmented system frequency response model is derived, including the system frequency response …

Hybrid Smart Transformer For Enhanced Power System Protection Against Dc With Advanced Grid Support, Moazzam Nazir

All Dissertations

The traditional grid is rapidly transforming into smart substations and grid assets incorporating advanced control equipment with enhanced functionalities and rapid self-healing features. The most important and strategic equipment in the substation is the transformer and is expected to perform a variety of functions beyond mere voltage conversion and isolation. While the concept of smart solid-state transformers (SSTs) is being widely recognized, their respective lifetime and reliability raise concerns, thus hampering the complete replacement of traditional transformers with SSTs. Under this scenario, introducing smart features in conventional transformers utilizing simple, cost-effective, and easy to install modules is a highly desired …

Protection Of Microgrids: A Scalable And Topology Agnostic Scheme With Self-Healing Dynamic Reconfiguration, Phani Harsha Gadde

All Dissertations

Momentum towards realizing the smart grid will continue to result in high penetration of renewable fed Distributed Energy Resources (DERs) in the Electric Power System (EPS). These DERs will most likely be Inverter Based Resources(IBRs) and will be an integral part of the distribution system in the near future. The drive towards resiliency with these IBRs will enable a modular topology where several microgrids are tied together, operating synchronously to form the future EPS at the distribution level.

Since the microgrids can evolve from existing distribution feeders, they will be unbalanced in load, phases, and feeder impedances. A typical control …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Analysis And Optimization Of The Two-Phase Series Capacitor Buck Dc-Dc Converter, Salahaldein Ali Aboajila Ahmed

Graduate Theses and Dissertations

Current sharing schemes for conventional multi-phase converters are based on sensing each phase current to deliver the current information to their controllers. In conventional buck converters, this fact may require a preset current sharing ratio at the expense of efficiency, which eventually requires a larger sensing circuit to achieve the sensing accuracy of each phase. Introducing the concept of automatic current sharing is one of the solutions to tackle this issue. Automatic current sharing (Current Sharing Mechanism CSM) is an advanced way to distribute heat generation in multi-phase switching topologies at full load. A two-phase series capacitor buck converter (2-pscB) …

Parameter Estimation And Charge Control In Standalone And Grid-Tied Batteries, Asadullah Khalid

FIU Electronic Theses and Dissertations

Energy storage systems are the critical components enabling an electrified future ranging from electric vehicles (EVs) to microgrid (MG) applications. With the advancements in these applications, the operational dynamics of electrochemical energy storage such as Lithium-ion batteries need to be analyzed from the lifecycle impact, cybersecurity, balancing requirements, and prognostics perspectives. These operations enable the interconnected systems to be secure, efficient, and self-adaptive while reducing greenhouse emissions.

This research aims to develop threefold solutions. The first objective of this dissertation is to analyze lifecycle impact, quantify the interconnection requirements of battery energy storage systems, and evaluate cybersecurity frameworks for battery …

Modeling And Control Of Direct-Conversion Hybrid Switched-Capacitor Dc-Dc Converters, Ziyu Xia

Dartmouth College Ph.D Dissertations

Efficient power delivery is increasingly important in modern computing, communications, consumer and other electronic systems, due to the high power demand and thermal concerns accompanied by performance advancements and tight packaging. In pursuit of high efficiency, small physical volume, and flexible regulation, hybrid switched-capacitor topologies have emerged as promising candidates for such applications. By incorporating both capacitors and inductors as energy storage elements, hybrid topologies achieve high power density while still maintaining soft charging and efficient regulation characteristics. However, challenges exist in the hybrid approach. In terms of reliability, each flying capacitor should be maintained at a nominal `balanced' voltage …

Study Of Electric Vehicle Smart Charging And Energy Management For Vehicle-Grid Integration Systems, Zhouquan Wu

Dissertations, Master's Theses and Master's Reports

The emerging need of building an efficient Electric Vehicle (EV) charging infrastructure requires the investigation of all aspects of Vehicle-Grid Integration (VGI). This dissertation studies the optimal EV charging control and energy management of VGI system to address the economic benefits of EV charging customers and operation stability of distribution power grids. First of all, a centralized EV charging control method is developed under the transactive energy environment to minimize the EV charging cost and avoid the distribution power grid overloading. The quadratic programming is used to obtain optimized charging control actions. Case studies with hundreds of EVs are conducted …

Stability Approximation Method For Pulse Loads In Power Electronic Systems, Eduardo A. Marmol D

Dissertations, Master's Theses and Master's Reports

Pulse loads on power electronic distribution systems are becoming very popular nowadays as the components of ships and airplanes are moving to more electric power. However, the pulse loads have a destabilizing effect on the power distribution system. Usually, the method used to study the stability of this type of system are small-signal analyses and are based on a system where the load is modeled as a constant. Since DC-DC systems with pulsed loads are very nonlinear, a small-signal analysis does not provide helpful information related to the stability of the system. The work presented in this thesis focuses on …

Smart City Management Using Machine Learning Techniques, Mostafa Zaman

Theses and Dissertations

In response to the growing urban population, "smart cities" are designed to improve people's quality of life by implementing cutting-edge technologies. The concept of a "smart city" refers to an effort to enhance a city's residents' economic and environmental well-being via implementing a centralized management system. With the use of sensors and actuators, smart cities can collect massive amounts of data, which can improve people's quality of life and design cities' services. Although smart cities contain vast amounts of data, only a percentage is used due to the noise and variety of the data sources. Information and communication technology (ICT) …

Self-Oscillating Induction Heater, Patrick Rice

Dissertations, Master's Theses and Master's Reports

This report develops a control system to keep an induction heater in resonance. When a metallic workpiece is inserted in the air core of the workcoil, the resonant frequency changes. Different workpiece materials affect the resonant frequency and power. This presents a problem since changing the resonant frequency of the circuit while keeping the frequency constant reduces the maximum power of the circuit. Finite element analysis is used to find the circuit parameters of the workcoil and workpiece interaction. A non-linear controller which oscillates based on the resonant frequency of an LC tank is created. Nyquist and describing function analysis …