Power and Energy Commons^™

Portable Nano-Hydro Power Generator For The Dc House Project, Andrew Aw, James Biggs

Electrical Engineering

This senior project report explains the construction and design of a small, portable water generator that converts kinetic energy flowing in small creeks to electrical energy as a renewable source of energy for the DC House. The DC House, in short, is a project to build a self-sustainable house for Third World countries that utilizes only DC electricity. The system consists of two converters and a charge controller for a 12V lead-acid battery. The first converter converts the hydro generator voltage output to 15 Volts for safe and proper charging of the lead-acid battery by the charge controller. The second …

Motor Protection Lab Experiment Using Sel-710, Ozro Corulli

Electrical Engineering

Advancements in microprocessor based relay technology for power protection applications provide quicker response times and new methods of mitigation. This project develops a lab experiment for Cal Poly class EE444 - Power Systems Laboratory based on the Schweitzer SEL-710 motor protection relay. Learning objectives for this lab include relay setup, programming, and protection schemes for the following conditions: undervoltage, loss of phase, fault, locked rotor, and thermal overload. Today, utility companies across the globe use SEL relays for primary system protection, putting engineers familiar with their operation in high demand.

Energy Dashboard Tool For Cal Poly Dormitories, Katie Zombro

Electrical Engineering

This project defines the needs, uses, and future projects (as well as business cases and procurement) of a University Housing dashboard tool, utilized by the Red Brick Dormitories on the Cal Poly campus. This easily accessed tool provides simple information regarding energy trending data, allowing for all student residents no matter their academic discipline, to understand their energy trends and opportunities for reduction. With the Energy Dashboard in place, Cal Poly’s red brick dormitories experienced savings ranging from 10%-20% from the 2011-2012 school year baseline, by the end of the 2012-2013 academic year. With the help of the Dashboard, competitions …

Wind And Hydroelectric Power Simulation For The Dc House Project, Randy Lormand, Christopher Goloskie

Electrical Engineering

This project details the design and integration of a wind and hydroelectric power simulation system in correlation with the DC House Project. The simulator uses variable speed drives to rotate a DC motor which then drives a generator to produce output. This output is then regulated using a DC to DC converter which holds the voltage level constant making it easier to interface with other power sources for the house. The test results indicate that the simulator will be able to produce two separate power outputs that will provide at least 70 Watts of power in the acceptable speed range …

Unipolar Pulse Width Modulation Inverter, Randy Baggao, Gabriel Tam

Electrical Engineering

This project portrays the design and construction of a pulse width modulation (PWM) inverter. The inverter is implemented as a unipolar converter. The inverter provides a steady single-phase sinusoidal 60Hz AC voltage output from a DC input. This is a basic DC-AC power converter that is built in 3 separate phases and integrated altogether at the end. The inverter can be broken down into the control unit, firing circuit, and the H-bridge. By using the PWM method, one can control the frequency and amplitude of the output by using a reference signal. This method will also avoid using a transformer …

Merry-Go-Round Human Powered Generator, Daniel Barnicle, Dario Romero

Electrical Engineering

This project entails the design and construction of a Merry-Go-Round Human Powered Generator for the DC House project. The Merry-Go-Round Human-Powered-Generator is a sustainable project focusing on utilizing renewable human mechanical energy. As young children play on the Merry-Go-Round, the generator converts the mechanical energy to electrical energy for the DC House. The Merry-Go-Round Generator boosts the generated voltage output to power a battery. This electrical energy then transfers from the battery to the DC House to provide power to it.

Alternative Wheelchair Control System, Jessica Hendricks, Tara Keigharn

Electrical Engineering

We geared this project towards assisting an individual with limited[1] motor function to operate a wheelchair. The product targets individuals who find use of a joystick is ineffective or painful. We focused our design on the wheelchair bought from Adaptive Driving Systems (Driving, 2013); but ultimately we would like to field a final product capable of applying to any electric wheelchair. Our goal: a person to operate the electric wheelchair using sensors that transmit a translation of an individual’s hand movement through a wireless transmission to a microcontroller installed on the wheel chair that then controls the wheelchair’s movement. …

Off Grid Solar Powered Street Light, Justin Fang, Billy Pham

Electrical Engineering

Street lights are fixtures found in every city and serve the important purpose of illuminating the streets and keeping the roads safe for pedestrians and drivers. Current street lights are powered by the grid, power which is paid for by the taxpayers and could have been used to power homes instead. With this project, our goal is to design and implement an electric power system that collects and stores solar energy, and delivers power to an LED smart street light. The resulting system would reduce street light energy costs by 100% since they would not draw any power from the …

Ocean Wave Generator Using Electromagnetic Induction, Sutton Smiley, Adam Mccuistion

Electrical Engineering

No abstract provided.

Differential Transformer Protection Using The Sel 387 And Sel 587 Microprocessor Relays, Ryan Chun

Electrical Engineering

The objective of this Senior Project is to use the SEL 387 current differential and overcurrent microprocessor relays to protect three-single-phase 1 KVA 120:208 transformers configured in ∆-∆, Y-Y, Y-∆, and ∆-Y connections. In the second phase of this project, is to create a functioning lab that uses the SEL 587 relay to teach basic differential transformer protection for the upcoming EE-444 students.

The protection schemes developed in both of the senior project phases require the use of differential and overcurrent protection elements by monitoring the changes of the input and output current through the transformer. When these currents fail …

Low Speed Alternator Design, Scott Merrick

Electrical Engineering

No abstract provided.

Design Of Improved Distribution Panel For The Dc House, Nolan Joksch

Electrical Engineering

The DC House is a humanitarian project intended to provide electricity to rural areas that would benefit from electricity, but are too remote to have access to it. This particular project is to design and construct the feeder box for the electrical distribution system to distribute power to the system as well as protect it. Building an electrical panel that is easily maintained and, above all, safe for the user is key to this project.

Micro Hydropower System, Christpher Neally, Ian Verstuyft

Electrical Engineering

The micro hydropower project strives to meet the needs of a specific village in northern Thailand in partnership with Engineers Without Borders. Specifically, the electrical side of the system must be designed to convert the mechanical power of a flowing river that is turning a turbine into sustainable and dependable power. Currently available hydropower systems will be considered, analyzed, and tailored to suit the specific needs of the community in need. The system to be designed will be flexible enough to demonstrate proof-of-concept with the limited maximum generable power in lab while having the ability to be easily scaled for …

Cal Poly Wind Power Research Center Power Regulator, Ricardo Rodriguez, Steven Bounchareune

Electrical Engineering

Through funding from the California Central Coast Research Partnership (C3RP) the

CPWRC, led by Dr. Patrick Lemieux, has erected a horizontal axis wind turbine (HAWT) at the

Cal Poly Escuela Ranch site EL04. With the help of Dr. John Ridgely and Dr. Art MacCarley, the team has implemented a controller that delivers the power being generated by the turbine to a resistor bank which maintains a safe working speed for the turbine. The authors objectives for this project are to (1) become familiar with the operation of the turbine, (2) develop an AC-DC converter that regulates the output of the …

Swing Human Powered Generator: For The Dc House Project, Juan Vicente Avelar, Juan Jose Galindo, Juan Pramyr Ramos

Electrical Engineering

The Play Park Human Powered Generator project addresses various ways of generating power. More specifically, this project entails the design and construction of the Swing Power Generator to provide electrical power from mechanical energy. The swing generator will eventually be used as part of the human-powered generators utilized in the DC House project.

A swing generator prototype was built for this project, which demonstrates the feasibility of its use for electrical power source. Detailed design and construction of the swing generator is presented in this report along with results from hardware testing.

Dc House Distribution Panel, Khanh Ho

Electrical Engineering

This paper details the process in designing the distribution panel, or circuit breaker box for a DC house. The main purpose of the project is to design a distribution panel that will provide electrical power to the DC house while also providing an electrical system protection through the use of circuit breakers, or fuses. An actual hardware design for the distribution panel was built and tested. The results demonstrate the functionality of the breaker box to supply power to the DC House ensuring safe operation of the DC House.

Microgrid Power Quality Analysis, Nikolai Kempcatala, Daniel Pleau, Scott Clemons

Electrical Engineering

The microgrid power quality analysis senior project addresses power quality assessment. Our senior project uses the PowerSight 3000 power measurement tool to record and analyze various electrical measurements including voltage, current, power, power factor, harmonics and AC frequency.

Our project will analyze power quality issues that result from switching from the utility grid to a smart grid run on primarily photovoltaic distributed generation. In the event of a utility failure, the smart grid can serve as an isolated grid for the system, this is called islanded mode. Our project assesses the reliability of operation in islanded mode. Our analysis should …

Geothermal Injection Well Monitoring, Timothy Rempher

Electrical Engineering

People depend on electricity all over the world. They depend on it for anything from drying their hair to global communications to heating up food. Many methods of power generation exist, each using a different fuel such as nuclear power, natural gas, coal, wind or the sun. This project focuses on a power plant which uses the naturally hot water in the ground to generate electricity. This process of generating power is called “Geothermal.” This project consists of two parts. The first and major part is the design logic of a PLC program that monitors the flow rate of an …

Dc-Dc Converter Input Protection System For The Energy Harvesting From Exercise Machines (Ehfem) Project, Ryan Turner, Zack Weiler

Electrical Engineering

The ongoing Energy Harvesting from Exercise Machines (EHFEM) project at Cal Poly San Luis Obispo seeks to provide renewable energy without the high cost of implementation by harvesting DC power generated on machines used for physical exercise. The EHFEM project consists of numerous subprojects that involve converting different types of exercise machines for power generation. This project specifically works by scaling the output voltage from an elliptical machine using a DC-DC converter and sending it through an Enphase Micro-inverter to feed AC power back to the power grid and minimize energy spending. As a subset of the much larger project, …